Thermolysis of 3-phenyl-5-arylamino-1,2,4-oxadiazole and thiadiazole derivatives

Thermal reactions of 3-phenyl-5-arylamino-1,2,4-oxadiazoles I and II were investigated. Neat heating at ca. 250°C for 6 hours afforded H₂O, benzonitrile, arylcyanamides, arylamines, azobenzene, benzimidazole derivatives, and 3,3′-diphenyl-5,5′-bis[1,2,4-oxadiazolyl]. Analogous results were obtained by the thermolysis of 3-phenyl-5-anilino-1,2,4-thiadiazole III at ca. 200°C for 2 hours. In addition to H₂S, NH₃, and HNCS, phenyl isothiocyanate and thiocarbanilide were obtained. Thermolysis of III in quinoline as a radical trap gave analogous resuLts but also 2-anilinoquinoline. A free-radical mechanism has been suggested to account for the identified products. © 1997 John Wiley & Sons, Inc.     

THERMOLYSIS AND PHOTOLYSIS OF SOME THIOUREA DERIVATIVES (PART I)

Abstract

Thermolysis of N-benzoyl-N′-phenylthiourea (BPTU) on heating in air at 230°C gives NH₃, H₂S, benzaldehyde, benzil, aniline, azobenzene, benzamide, benzanilide, phenylisothiocyanate, phenyl-cyanamide, thiocarbanilide and benzoylisothiocyanate, whereas thermolysis of N-benzoy1-N′-benzylthiourea (BBTU) affords NH₃, H₂S, benzaldehyde, benzil, toluene, bibenzyl, stilbene, benzamide, cyanamide, benzylisothiocyanate, benzoylthiourea and benzoylisothiocyanate. Thermolysis of N-benzoyl-N′-α-naphthylthiourea (BNTU) under the same conditions gives NH₃, H₂S. benzaldehyde, benzil, benzamide, α-naphthylisothiocyanate, α-naphthanilide, α-naphthylcyanamide. benzoylisothiocyanate, α-naphthylamine and N,N′-di-α,α′-naphthylthiourea. Analogous results were also obtained on photolysis of (BFTU), (BBTU) and (BNTU) with the exception of NH₃, and the photodegradation products of phenylthiourea, benzylthiourea and a-naphthylthiourea respectively. The main feature of these pyrolyses is the homolysis of the amide and thioamide bonds providing free radicals that undergo different reactions involving H-abstraction, dimerization, coupling, fragmentation, rearrangement and disproportionation to yield the identified products.     

Basische metalle : IX. Synthese und kristallstruktur von C5H5Co(PMe3)CS2. Reaktionen zu zweikernkomplexen mit Co(SCS)Cr- und Co(SCS)Mn-Brückenbindungen

C₅H₅Co(PMe₃)CS₂ (IV) is formed in practically quantitative yield in the reaction of C₅H₅Co(PMe₃)₂ (I) or the heterobinuclear complex C₅H₅(PMe₃)Co(CO)₂Mn(CO)C₅H₄Me (III) with CS₂. The crystal structure shows that the carbon disulfide bonds as a dihapto ligand through the carbon and one sulfur atom (S(2)) (CoC = 1.89, CoS(2) = 2.24 Å, S(2)CS(1) = 141.2°). The two CS bond lengths in IV (CS(2) = 1.68, CS(1) =1.60 Å) are greater than in free CS₂ (1.554Å) which is in agreement with the strong π-acceptor character of h²-CS₂ as shown in the spectroscopic data. IV reacts with Cr(CO)₅THF and C₅H₅Mn(CO)₂THF to give the complexes C₅H₅(PMe₃)Co(SCS)Cr(CO)₅ (V) and C₅H₅(PMe₃)Co(SCS)Mn(CO)₂C₅H₅ (VI) respectively, in which the sulfur atom S(1) that is not bound to cobalt coordinates to the 16-electron fragments Cr(CO)₅ and Mn(CO)₂C₅H₅. The spectroscopic data of IV, V and VI are discussed.     

SYNTHESIS OF POLYFUSED THIENO(2,3-b)THIOPHENES PART 1: SYNTHESIS OF THIENOPYRIMIDINE DERIVATIVES

Abstract

3,4-Diamino-2,5-dicarbethoxythieno(2.3-b)thiophene 1 reacted with malononitrile or ethyl cyanoacetate to afford bis(thienopyrimidin-4-one) derivatives 2_a.b The reaction of compound 1 with o-aminothiophenol, o-aminophenol or o-phenylenediamine gave benzothiazolyl-, benzoxazolyl-, benzoimidazolylthienothiophene 3_a-c, Chloroacetylation of compound 1 and reacting the resulting compound 4 with malononitrile furnished thienopyrolopyrimidine 6. Fusion of compound 1 with formamide yielded bis(thienopyrimidine) 7 which reacted with POCI₃/PCl₅ to yield the corresponding chloro derivative 8 which was converted into the corresponding hydrazine derivative 9. Treatment of compound 1 with CS₂, NaOH and 1,2 dibromoethane produced the corresponding 1.3 dithiolane 11 which also treated with chloroacetyl chloride or ethyl mercaptoacetate to get the corresponding β-lactame 12 or thiazolidinone 13. On reacting compound 1 with CS₂, NaOH and (CH₃)₂S0₄ produced the corresponding bi(dithiocarbamate methyl ester) 14 which treated with hydrazine hydrate to yield the corresponding bis(thienopyrimidine) derivative 15. This compound reacted with Lawesson's reagent (LR) to give the desired compounds 16 and 17. While its reaction with (CH₃)₂ SO₄ and NaOH furnished the corresponding methyl derivative 18. Fusion of compound 18 with aniline afforded compound 19. Compound 19 was allowed to react with ethyl acetoacetate, acetylacetone, α-oxoketene dithioacetal, ethoxymethylene malononitrile or LR to get the described compounds 2O_a.b-24 respectively.     

trans‐Bis(thioacetato‐S)bis(triphenylphosphine‐P)nickel(II)

In the title compound, [Ni(C₂H₃OS)₂(C₁₈H₁₅P)₂], the Ni atom lies on an inversion centre and the tri­phenyl phosphine and thio­acetate ligands are bonded to the central Ni^II atom in a trans fashion, with Ni—S = 2.2020 (8) and Ni—P = 2.2528 (8) Å, and angle S—Ni—P = 92.47 (3)°.     

Carbonylation of nitrobenzene in methanol with palladium bidentate phosphane complexes: an unexpectedly complex network of catalytic reactions, centred around a Pd-imido intermediate

The reactivity of palladium complexes of bidentate diaryl phosphane ligands (P₂) was studied in the reaction of nitrobenzene with CO in methanol. Careful analysis of the reaction mixtures revealed that, besides the frequently reported reduction products of nitrobenzene [methyl phenyl carbamate (MPC), N,N′‐diphenylurea (DPU), aniline, azobenzene (Azo) and azoxybenzene (Azoxy)], large quantities of oxidation products of methanol were co‐produced (dimethyl carbonate (DMC), dimethyl oxalate (DMO), methyl formate (MF), H₂O, and CO). From these observations, it is concluded that several catalytic processes operate simultaneously, and are coupled via common catalytic intermediates. Starting from a P₂Pd⁰ compound formed in situ, oxidation to a palladium imido compound P₂Pd^II?NPh, can be achieved by de‐oxygenation of nitrobenzene 1) with two molecules of CO, 2) with two molecules of CO and the acidic protons of two methanol molecules, or 3) with all four hydrogen atoms of one methanol molecule. Reduction of P₂Pd^II?NPh to P₂Pd⁰ makes the overall process catalytic, while at the same time forming Azo(xy), MPC, DPU and aniline. It is proposed that the Pd–imido species is the central key intermediate that can link together all reduction products of nitrobenzene and all oxidation products of methanol in one unified mechanistic scheme. The relative occurrence of the various catalytic processes is shown to be dependent on the characteristics of the catalysts, as imposed by the ligand structure.     

Four related diethyl [(arylamino)(4‐ethynylphenyl)methyl]phosphonates

Crystal structures are reported for four related diethyl [(arylamino)(4‐ethynylphenyl)lmethyl]phosphonate derivatives, namely diethyl [(4‐bromoanilino)(4‐ethynylphenyl)methyl]phosphonate, C₁₉H₂₁BrNO₃P, (I), diethyl ((4‐chloro‐2‐methylanilino){4‐[2‐(trimethylsilyl)ethynyl]phenyl}methyl)phosphonate, C₂₃H₃₁ClNO₃PSi, (II), diethyl ((4‐fluoroanilino){4‐[2‐(trimethylsilyl)ethynyl]phenyl}methyl)phosphonate, C₂₂H₂₉FNO₃PSi, (III), and diethyl [(4‐ethynylphenyl)(naphthalen‐2‐ylamino)methyl]phosphonate, C₂₃H₂₄NO₃P, (IV). The conformation of the anilinobenzyl group is very similar in all four compounds. The P—C bond has an approximately staggered conformation, with the aniline and ethynylphenyl groups in gauche positions with respect to the P=O double bond. The two six‐membered rings are almost perpendicular. The sums of the valence angles about the N atoms vary from 344 (2) to 351 (2)°. In the crystal structures, molecules of (I), (III) and (IV) are arranged as centrosymmetric or pseudocentrosymmetric dimers connected by two N—H...O=P hydrogen bonds. The molecules of (II) are arranged as centrosymmetric dimers connected by C_methyl—H...O=P hydrogen bonds. The N—H bond of (II) is not involved in hydrogen bonding.     

Beiträge zur Chemie N-organylsubstituierter Metallamide. XIX. Umsetzung von [Co(NPh2)2]2 mit CO – ein neuer Weg zur Synthese eines Innerkomplexes des Cobalt(II) mit einem Anthranilsäurederivat; Molekularstruktur von [Co(NPh(o?C6CONPh2))2]

Contributions to the Chemistry of N-substituted Metal Amides. XIX. Reaction of [Co(NPh₂)₂]₂ with CO – a New Way for the Synthesis of an Chelate Complex of Cobalt (II) with an Derivative of Anthranilic Acid; Molecular Structure of [Co(NPh(o? C₆H₄CONPh₂))₂] Reaction of CO (1 atm, room temperature) with [Co(NPh₂)₂]₂ ( I ) in benzene (mole ratio 3 : 1) gives Co(CO)₃(NPh₂)₄(benzene)_1·6 ( II ). By adding more CO to the reaction mixture (mole ratio 6 : 1) Co₄(CO)₁₂ ( III ) and a dark red compound of the analytical composition C₅₀H₃₈CoN₄O₂ ( IV ) could be isolated. The structure of the red compound was determined by X-ray diffraction. This investigation show IV to be a cobalt(II) complex of an derivative of the anthranilic acid, [Co(NPh(o? C₆H₄CONPh₂))₂] ( IV ). The cobalt coordination in this compound is a distorted tetrahedron. Crystal data of IV : space group P1 with a = 12.449(1) Å, b = 12.431(1) Å, c = 13.223(1) Å, α = 95.47(1)°, β = 95.37(1)°, γ = 94.10(1)°, and Z = 2.     

Multinuclear (Sn/Pd) complexes with disodium 2,2′-(dithiocarboxyazanediyl)diacetate hydrate; Synthesis,characterization and biological activities

Bimetallic chlorodi-/triorganotin(IV) derivatives of general formulas R₂(H₂O)SnLCSSSn(Cl)R₂ (R=Me: 1; Ph: 2) and R₃Sn(Na)LCSSSnR₃·H₂O (R=Bu: 3; Ph: 4) were prepared by reaction of iminodiacetic acid disodium salt hydrate (Na₂LH) with CS₂ and R₂SnCl₂/R₃SnCl in methanol. The reaction between Na₂LH, CS₂, and PdCl₂ produced [Na₂LCSS]₂Pd·2H₂O (5) which was treated with R₃SnCl to synthesize the heterobimetallic derivatives [R₃Sn(Na)LCSS]₂Pd·2H₂O (R=Me: 6; Ph: 7). The complexes were characterized by microanalysis, spectroscopic, and thermogravimetric analyses. Elemental analysis data, mass fragmentation, and thermal degradation patterns supported the molecular composition of the complexes. FT-IR data indicated monodentate binding of carboxylate while a chelating coordination mode of the dithiocarboxylate was verified in the solid state. A five-coordinate tin(IV) was demonstrated in the solid state. In solution, a tetrahedral/trigonal bipyramidal configuration around Sn(IV) and a square planar geometry of Pd(II) was indicated by multinuclear NMR (¹H and ¹³C) and UV-visible studies. The Pd(II) derivatives showed interaction with salmon sperm-DNA and caused an inhibition of alkaline phosphatase (ALPs). The antibacterial/antifungal potential of the coordination products varied with the nature of incorporated metal and a substitution pattern at tin(IV); the palladium metallation decreased the antimicrobial activities. The triorganotin(IV) products exhibited more powerful action against bacteria/fungi as compared to their diorganotin(IV) counterparts. The complexes displayed sufficiently lower hemolytic effects in vitro as compared to triton X-100 and slightly higher than PBS.     

Six closely related 4,6‐disubstituted 2‐amino‐5‐formylpyrimidines: different ring conformations,polarized electronic structures,and hydrogen‐bonded assembly in zero,one, two and three dimensions

In each of ethyl N‐{2‐amino‐5‐formyl‐6‐[methyl(phenyl)amino]pyrimidin‐4‐yl}glycinate, C₁₆H₁₉N₅O₃, (I), N‐{2‐amino‐5‐formyl‐6‐[methyl(phenyl)amino]pyrimidin‐4‐yl}glycinamide, C₁₄H₁₆N₆O₂, (II), and ethyl 3‐amino‐N‐{2‐amino‐5‐formyl‐6‐[methyl(phenyl)amino]pyrimidin‐4‐yl}propionate, C₁₇H₂₁N₅O₃, (III), the pyrimidine ring is effectively planar, but in each of methyl N‐{2‐amino‐6‐[benzyl(methyl)amino]‐5‐formylpyrimidin‐4‐yl}glycinate, C₁₆H₁₉N₅O₃, (IV), ethyl 3‐amino‐N‐{2‐amino‐6‐[benzyl(methyl)amino]‐5‐formylpyrimidin‐4‐yl}propionate, C₁₈H₂₃N₅O₃, (V), and ethyl 3‐amino‐N‐[2‐amino‐5‐formyl‐6‐(piperidin‐4‐yl)pyrimidin‐4‐yl]propionate, C₁₅H₂₃N₅O₃, (VI), the pyrimidine ring is folded into a boat conformation. The bond lengths in each of (I)–(VI) provide evidence for significant polarization of the electronic structure. The molecules of (I) are linked by paired N—H...N hydrogen bonds to form isolated dimeric aggregates, and those of (III) are linked by a combination of N—H...N and N—H...O hydrogen bonds into a chain of edge‐fused rings. In the structure of (IV), molecules are linked into sheets by means of two hydrogen bonds, both of N—H...O type, in the structure of (V) by three hydrogen bonds, two of N—H...N type and one of C—H...O type, and in the structure of (VI) by four hydrogen bonds, all of N—H...O type. Molecules of (II) are linked into a three‐dimensional framework structure by a combination of three N—H...O hydrogen bonds and one C—H...O hydrogen bond.     

Triterpene glycosides of alfalfa. III. Medicoside I

On the basis of chemical transformations and with the aid of physicochemical results, the structure of glycoside I isolated from the roots of the plantMedicago sativa has been established as hederagin 3-O-[O-α-L-arabinopyranosyl-(1 → 2)-β-D-glucopyranosyl-(1 → 2)-α-L-arabinopyranoside] 28-O-β-D-glucopyranoside. Compound (I), C₅₂H₈₄O₂₂, mp 210–212°C, [α] _D ²¹ +38.4° (c 1.48; methanol). Acid hydrolysis of (I) led to hederogenin (II) — C₃₀H₄₈O₄, mp 326–330°C, [α] _D ²³ +84.2° (c 0.19; pyridine. The Hakomorimethylation of glycoside (I) yielded the permethylate (IV) — C₆₅H₁₁O₂₂ [α] _D ²³ +41.6° (c 1.79; methanol). The GLC analysis of the products of the methanolysis of compound (IV) showed the presence of 3,4,6-tri-O-methyl-D-glucopyranose, 2,3,4,6-tetra-O-methyl-D-glucopyranose, 3,4-di-O-methyl-L-O-arabinopyranose, and 2,3,4-tri-o-methyl-L-arabinopyranose. The alkaline hydrolysis of glycoside I gave compound (III) with mp 230–233°C, [α] _D ²¹ +35.2° (c 0.21; methanol), which was identified as medicoside C. Details of the PMR spectrum are given for compound (IV) and of the IR spectrum for compound (I).     

Seven 5‐benzylamino‐3‐tert‐butyl‐1‐phenyl‐1H‐pyrazoles: unexpected isomorphisms,and hydrogen‐bonded supramolecular structures in zero,one and two dimensions

5‐Benzylamino‐3‐tert‐butyl‐1‐phenyl‐1H‐pyrazole, C₂₀H₂₃N₃, (I), and its 5‐[4‐(trifluoromethyl)benzyl]‐, C₂₁H₂₂F₃N₃, (III), and 5‐(4‐bromobenzyl)‐, C₂₀H₂₂BrN₃, (V), analogues, are isomorphous in the space group C2/c, but not strictly isostructural; molecules of (I) form hydrogen‐bonded chains, while those of (III) and (V) form hydrogen‐bonded sheets, albeit with slightly different architectures. Molecules of 3‐tert‐butyl‐5‐(4‐methylbenzylamino)‐1‐phenyl‐1H‐pyrazole, C₂₁H₂₅N₃, (II), are linked into hydrogen‐bonded dimers by a combination of N—H...π(arene) and C—H...π(arene) hydrogen bonds, while those of 3‐tert‐butyl‐5‐(4‐chlorobenzylamino)‐1‐phenyl‐1H‐pyrazole, C₂₀H₂₂ClN₃, (IV), form hydrogen‐bonded chains of rings which are themselves linked into sheets by an aromatic π–π stacking interaction. Simple hydrogen‐bonded chains built from a single N—H...O hydrogen bond are formed in 3‐tert‐butyl‐5‐(4‐nitrobenzylamino)‐1‐phenyl‐1H‐pyrazole, C₂₀H₂₂N₄O₂, (VI), while in 3‐tert‐butyl‐5‐(3,4,5‐trimethoxybenzylamino)‐1‐phenyl‐1H‐pyrazole, C₂₃H₂₉N₃O₃, (VII), which crystallizes with Z′ = 2 in the space group P, pairs of molecules are linked into two independent centrosymmetric dimers, one generated by a three‐centre N—H...(O)₂ hydrogen bond and the other by a two‐centre N—H...O hydrogen bond.     

REACTIONS OF CARBONYLSULPHIDE WITH [Rh(PPh3)3CI] AND [Pt(PPh3)3]

Abstract

Activation of small inorganic molecules (H₂, N₂, O₂, CO, NO, CO₂, SO₂, CS₂) by the complexes of transition metal ions like Rh(I), Ir(I), Pt(O) and Ru(II) have gained considerable interest during the last decade.^1–8 Because of the similarity of CO₂ and CS₂ molecules with COS, one would expect COS to form complexes with the transition metal ions analogous to those of CO₂ and CS₂. In addition, COS being susceptible to decomposition into CO and S, could also form carbonyl complexes. Until now, the only reaction of COS that has been successfully carried out is with [Pt(PPh₃)₃] which resulted in the formation of [Pt(COS)(PPh₃)₂] and [Pt₂S(CO) (PPh₃)₃]. ^8,9 It will, therefore, be interesting to study further the reactions of COS with the complexes of transition metal ions. The results of a preliminary study of such reactions with [Rh(PPh₃)₃Cl] and [Pt(PPh₃)₃] are reported in this communication.     

Three (E)‐2‐[(bromo­phen­yl)imino­meth­yl]‐4‐methoxy­phenols

The title compounds, (E)‐2‐[(2‐bromo­phenyl)imino­methyl]‐4‐methoxy­phenol, C₁₄H₁₂BrNO₂, (I), (E)‐2‐[(3‐bromo­phenyl)­imino­methyl]‐4‐methoxy­phenol, C₁₄H₁₂BrNO₂, (II), and (E)‐2‐[(4‐bromo­phenyl)imino­methyl]‐4‐methoxy­phenol, C₁₄H₁₂BrNO₂, (III), adopt the phenol–imine tautomeric form. In all three structures, there are strong intra­molecular O—H⋯N hydrogen bonds. Compound (I) has strong inter­molecular hydrogen bonds, while compound (III) has weak inter­molecular hydrogen bonds. In addition to these inter­molecular inter­actions, C—H⋯π inter­actions in (I) and (III), and π–π inter­actions in (I), play roles in the crystal packing. The dihedral angles between the aromatic rings are 15.34 (12), 6.1 (3) and 39.2 (14)° for (I), (II) and (III), respectively.     

(E)‐1‐(2′‐Deoxy‐β‐d‐ribo­furan­osyl)‐2,4‐di­fluoro‐5‐(2‐iodo­vinyl)­benzene

This analysis of the title compound, C₁₃H₁₃F₂IO₃, establishes the orientation of (E)‐5‐(CH=CH—I) as antiperiplanar (ap) to the C—C bond (5–6 position) of the 2,4‐di­fluoro­phenyl ring system, with the (E)‐5‐(CH=CH—I) H atom located in close proximity (2.17 Å) to the F4 atom of the 2,4‐di­fluoro­phenyl moiety.     

Tricarbonyl complexes of rhenium(I) and technetium(I) with thiourea derivatives

fac-[M(CO)₃X₃]²⁻ complexes (M=Re, X=Br; M=Tc, X=Cl) react with thiourea derivatives under formation of stable rhenium(I) and technetium(I) complexes. The composition of the products can be controlled by the steric requirements of the ligands and their ability to form chelates.The products of reactions with tetramethylthiourea, Me₄tu (I), N,N-diethylthiocarbamoylbenzamidine, H₂Et₂tcb (II), and morpholinylthiocarbamoylbenzamidine, H₂morphtcb (III), have been studied by X-ray crystallography showing that the products belong to three different structural types. A mononuclear complex of the composition fac-[Re(CO)₃Br(Me₄tu)₂] has been isolated with tetramethylthiourea, whereas the thiocarbamoylbenzamidines deprotonate and act as N,S-chelating ligands. This results in the formation of a dimeric [Tc(CO)₃(HEt₂tcb-N,S)]₂ complex with a central, almost square Tc₂S₂ unit and a monomeric compound of the composition [Tc(CO)₃(Hmorphtcb-N,S)(H₂morphtcb-S)]. The latter compound contains a neutral, S-bonded morpholinylthiocarbamoylbenzamidine in the unusual imine form in addition to a chelate-bonded Hmorphtcb⁻ ligand.     

4‐(2‐Hydroxyphenyl)‐2‐phenyl‐2,3‐dihydro‐1H‐1,5‐benzodiazepine and the 2‐(2,3‐dimethoxyphenyl)‐, 2‐(3,4‐dimethoxyphenyl)‐ and 2‐(2,5‐dimethoxyphenyl)‐substituted derivatives

The 1,5‐benzodiazepine ring system exhibits a puckered boat‐like conformation for all four title compounds [4‐(2‐hydroxyphenyl)‐2‐phenyl‐2,3‐dihydro‐1H‐1,5‐benzodiazepine, C₂₁H₁₈N₂O, (I), 2‐(2,3‐dimethoxyphenyl)‐4‐(2‐hydroxyphenyl)‐2,3‐dihydro‐1H‐1,5‐benzodiazepine, C₂₃H₂₂N₂O₃, (II), 2‐(3,4‐dimethoxyphenyl)‐4‐(2‐hydroxyphenyl)‐2,3‐dihydro‐1H‐1,5‐benzodiazepine, C₂₃H₂₂N₂O₃, (III), and 2‐(2,5‐dimethoxyphenyl)‐4‐(2‐hydroxyphenyl)‐2,3‐dihydro‐1H‐1,5‐benzodiazepine, C₂₃H₂₂N₂O₃, (IV)]. The stereochemical correlation of the two C₆ aromatic groups with respect to the benzodiazepine ring system is pseudo‐equatorial–equatorial for compounds (I) (the phenyl group), (II) (the 2,3‐dimethoxyphenyl group) and (III) (the 3,4‐dimethoxyphenyl group), while for (IV) (the 2,5‐dimethoxyphenyl group) the system is pseudo‐axial–equatorial. An intramolecular hydrogen bond between the hydroxyl OH group and a benzodiazepine N atom is present for all four compounds and defines a six‐membered ring, whose geometry is constant across the series. Although the molecular structures are similar, the supramolecular packing is different; compounds (I) and (IV) form chains, while (II) forms dimeric units and (III) displays a layered structure. The packing seems to depend on at least two factors: (i) the nature of the atoms defining the hydrogen bond and (ii) the number of intermolecular interactions of the types O—H...O, N—H...O, N—H...π(arene) or C—H...π(arene).     

Substituent position effect on the crystal structures of N‐phenyl‐2‐phthalimidoethanesulfonamide derivatives

In order to determine the impact of different substituents and their positions on intermolecular interactions and ultimately on the crystal packing, unsubstituted N‐phenyl‐2‐phthalimidoethanesulfonamide, C₁₆H₁₄N₂O₄S, (I), and the N‐(4‐nitrophenyl)‐, C₁₆H₁₃N₃O₆S, (II), N‐(4‐methoxyphenyl)‐, C₁₆H₁₆N₃O₆S, (III), and N‐(2‐ethylphenyl)‐, as the monohydrate, C₁₈H₁₈N₂O₄S·H₂O, (IV), derivatives have been characterized by single‐crystal X‐ray crystallography. Sulfonamides (I) and (II) have triclinic crystal systems, while (III) and (IV) are monoclinic. Although the molecules differ from each other only with respect to small substituents and their positions, they crystallized in different space groups as a result of differing intra‐ and intermolecular hydrogen‐bond interactions. The structures of (I), (II) and (III) are stabilized by intermolecular N—H…O and C—H…O hydrogen bonds, while that of (IV) is stabilized by intermolecular O—H…O and C—H…O hydrogen bonds. All four structures are of interest with respect to their biological activities and have been studied as part of a program to develop anticonvulsant drugs for the treatment of epilepsy.     

Über Chalkogenolate. 136 [1]. Alkylester der Cyanoameisensäure und der Cyanomonothioameisensäure

On Chalcogenolates. 136. Alkyl Esters of Cyanoformic Acid and of Cyanomonothioformic Acid By use of the phase transfer catalyst 18-crown-6 the esters CH₃O—CO—CN, C₂H₅O—CO—CN, C₂H₅S—CO—CN, and ⁿC₃H₇S—CO—CN have been prepared by reaction of the corresponding chloro compound with potassium cyanide. The prepared compounds have been characterized by means of electron absorption, infrared, nuclear magnetic resonance (¹H and ¹³C), and mass spectra.     

Antiferromagnetic complexes involving metal---metal bonds III. Synthesis, structure and magnetic properties of heterotrinuclear complexes of the type M(CO)5L (M = Cr, Mo and w) containing [(C5H5CrSCMe3)2S] as unusual antiferromagnetic ligand L

Isostructural heterotrinuclear complexes (C₅H₅CrSCMe₃)₂S · M(CO)₅ (II–IV) were isolated from photochemical reactions between the antiferromagnetic complex (C₅H₅CrSCMe₃)₂S (I) (with the Cr---Cr bond 2.689 Å long and with the exchange parameter −2J = 430 cm⁻¹) and metal hexacarbonyls, M(CO)₆, where M is Cr, Mo, or W. According to the X-ray structural data on III and IV, complex I plays the role of an unusual antiferromagnetic ligand L bound to M through the sulphide bridge (M–S 2.58(2) Å). Its geometry remains practically unaffected by the complex formation (the Cr---Cr bond length in III and IV is 2.73(1) Å). The exchange parameter, −2J (410, 440 and 440 cm⁻¹ in II to IV, respectively), also shifts only insignificantly from that of I, which probably means that indirect exchange via the sulphide bridge in I is of minor importance compared with the direct Cr---Cr exchange. The Cr---Cr bond length may thus be correlated with the observed overall exchange coupling.