Sequence Distribution of Poly(methyl acrylate) by Incremental Calculation

The carbonyl signal in the 100 MHz ¹³C NMR spectra of poly(methyl acrylate) (PMA) recorded in benzene-d₆ exhibits configurational sensitivity up to pentads, and the signal of backbone β-CH₂ carbons shows splitting up to configurational hexads with traces of octads. Assignment of the sequences to respective signals was confirmed by computer simulation of both carbonyl and methylene signals applying a method of incremental calculation of chemical shifts of individual sequences and second-order Markov statistics for sequence probabilities.     

Novel Synthesis,Characterization of N1,N1,N4,N4-tetrakis (2-hydroxyethyl) terephthalamide (THETA) and Terephthalic Acid (TPA) by Depolymerization of PET Bottle Waste Using Diethanolamine

Chemical depolymerization of poly(ethylene terephthalate) (PET) waste is a possible remedy to huge amount of solid waste generation as it results in degradation products that possess a potential of recyclability. PET bottle waste was depolymerized by aminolysis using diethanolamine. Novel synthesis of N¹, N¹,N⁴,N⁴-tetrakis (2-hydroxyethyl) terephthalamide (THETA) with 73-76% yield and terephthalic acid (TPA) with 78-82% yield was achieved. The purified products were analyzed by FTIR, melting point, DSC, DTG and ¹H-NMR. THETA has various applications in the synthesis of rigid polyurethane foam, unsaturated polyester resins and also as a cross linking agent/ hardener for epoxy resins.     

[2,2,2-TRIFLUOR-1-(2-HYDROXYPHENYL)ETHYL]-PHOSPHONSÄURE: MOLEKÜLSTRUKTUR VON [2,2,2-TRIFLUOR-1-(2-HYDROXYPHENYL)-ETHYL]DIMETHYLPHOSPHONAT

Abstract

The interaction of trimethylphosphite (1) and 2-trifluoroacetylphenol (2) yielded 4,5-benzo-2,2,2-trimethoxy-3-trifluoromethyl-1,2λ⁵[sgrave]⁵-oxaphosphol (3) and trimethylphosphate but not the expected 3-hydroxy derivative. Hydrolysis of compound 3 furnished the respective acyclic dimethylphosphonate 4 which was converted into the bis(trimethylsilyl)ester 5 and finally into the free phosphonic acid 6. O-trimethylsilylated compound 8 added to tris(trimethylsilyl)phospite (7) furnishing phosphonate 9 without abstracting the [sgrave]-oxygen. The molecular structure of 4 exhibited a somewhat distorted tetrahedral arrangement of substituents around phosphorus. An intermolecular hydrogen bridge O—H… O[dbnd]P was observed (O…O = 266.7 pm).     

3-(4-Phenyl-1,2,4-triazol-3-yl)chromones

The condensation of 4-phenyl-1,2,4-triazol-3-ylacetonitrile with 2-methyl-, 4-ethylresorcinol, and with pyrogallol gave α-(4-phenyl-1,2,4-triazol-3-yl)-2,4-dihydroxyacetophenones. Upon treatment with acid anhydrides and chlorides and subsequent hydrolysis these form 7-hydroxy-3-(4-phenyl)-1,2,4-triazol-3-yl)chromones with different substituents in both the benzene and the pyrone rings. __________ Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 11, pp. 1676–1684, November, 2005.     

Mono and Bisphosphonates from Perfluoro Olefins and Polyfunctional Fluoro Ketones. Syntheses,Molecular Structure and Derivatives

Perfluoroalkenyl phosphonates were formed along with Me₃SiF using CF₃CF=CF₂, CF₃CH=CF₂, F₅SCF=CF₂ or F₅SCH=CF₂ and silylated phosphites, (R¹O)₂POSiMe₃ (R¹=Et, SiMe₃). This straightforward method could be extended to perfluorobutadienes CF₂=C(R^F)C(R^F)=CF₂ (R^F F=F, CF₃). The formation of CF₃C(=O)P(=O)(OSiMe₃)₂ and further reactions to yield bisphosphonates will be described. Acetylphosphonates, R²C(=O)P(=O)(OSiMe₃)₂ (R²=CH₃, CF₃) reacted with the ketimine, CH₃C(=NiPr)Ph to give α-hydroxy-γ-imino phosphonates. Trifluoroacetylphenol and 2,6-bis(trifluoracetyl)-4-methyl-phenol have been proven to be versatile precursors for α-and γ-hydroxy phosphonates. Intermediates in these reactions were found to be cyclic λ⁵σ⁵P species.     

Enantioselective syntheses of no-carrier-added (n.c.a.) (s)-4-chloro-2-[f] fluorophenylalanine and (s)-(α-methyl) -4-chloro-2-[f]fluorophenylalanine

(S)-4-Chloro-2-fluorophenylalanine and (S)-(α-methy)-4-chloro-2-fluorophenylalanine were synthesized and labeled with no carrier added (n.c.a.) fluorine-18 through a radiochemical synthesis relying on the highly enantioselective reaction between 4-chloro-2-[¹⁸F]fluorobenzyl iodide and the lithium enolate of (2S)-1-(tert-butyloxycarbonyl)-2-(tert-butyl)-3-methyl-1,3-imidazolidine-4-one for (S)-4-chloro-2-[¹⁸F]fluorophenylalanine and (2S,5S)-1-(tert-butyloxycarbonyl)-2-(tert-butyl)-3,5-dimethyl-1,3-imidazolidine-4-one for (S)-(α-methyl) -4-chloro-2-[¹⁸F] fluorophenylalanine. Quantities of about 20–25 mCi were obtained at the end of sy nthesi s, ready for injection after hydrolysis and high performance liquid chromatography (HPLC) purification, with a radiochemical yield of 17%–20% corrected to the end of bombardment after a total synthesis time of 90–105 min from [¹⁸F] fluoride. The enantiomeric excesses were shown to be 97% or more for both molecules without chiral separation and the radiochemical and chemical purities were 98% or better.     

Poly(2-(dimethylamino)ethyl methacrylate) brushes fabricated by surface-mediated RAFT polymerization and their response to pH

In this study, well-defined, high density poly(2-(dimethylamino)ethyl methacrylate) [poly(DMAEMA)] brushes were fabricated by the combination of the self-assembly of a monolayer of RAFT agent and surface-mediated RAFT polymerization. The whole fabrication process of the poly(DMAEMA) was followed by water contact angles, grazing angle-Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, and atomic force microscopy. Kinetic studies revealed a linear increase in poly(DMAEMA) film thickness with polymerization time, indicating that the chain growth from the surface was a controlled process. Characterization of the poly(DMAEMA) brushes, such as molecular weight and thickness determination, were measured by gel permeation chromatography, and ellipsometry, and the grafting density was estimated. The pH response of the poly(DMAEMA) brushes was further investigated and the results verified the “brush-like” to “mushroom-like” transition of the poly(DMAEMA) chains due to the reversible protonation/deprotonation upon changing the solution pH.     

Dilute Solution Properties of Poly(Vinyl Chloride)

Light scattering and viscosity studies were made on dilute solutions of poly(vinyl chloride) (PVC) in three solvents: cyclo-hexanone, cyclopentanone, and tetrahydrofuran. Eight samples of PVC (M_w = 25,400 to 145,000) were used to determine the intrinsic viscosities, molecular weights, and the polymer-solvent interaction parameters over a range of temperatures. The solutions were found to behave normally and to exhibit no evidence of aggregate formation. The molecular weights obtained in all three solvents were independent of temperature and agreed well within the experimental errors. The interaction parameters observed were independent of concentration and molecular weight, and functions only of temperature. The intrinsic viscosities were related to molecular weight by the Mark-Houwink equation between 20 and 50°C. The temperature coefficient of the interaction parameter obtained by light scattering agrees well with that found by viscometry. Cyclohexanone, cyclopentanone, and tetrahydrofuran are all good solvents for PVC, and the order of solvent quality is cyclohexanone > cyclopentanone > tetrahydrofuran.     

4-AHBA为核的聚芳醚树枝状化合物的合成及其光学性能

合成了三个新的以2-(4-氨基-2-羟基苯基)苯并噻唑(4-AHBA)为核的聚芳醚树枝状化合物(1a～1c),其结构由1H NMR,13C NMR,IR,MS和元素分析表征.研究了1和4-AHBA在氯仿中的紫外吸收光谱和荧光发射光谱,结果表明,1与4-AHBA相比,紫外吸收强度大大提高,且最大吸收波长从349 nm红移...     

Cobalt(II), nickel(II) and zinc(II) coordination compounds derived from aromatic amines

The structural and spectroscopic characterization of coordination compounds of four aromatic amines derived from benzimidazole, 2-aminobenzimidazole (L1), 1-(S-methylcarbodithioate)-2-aminobenzimidazole (L2), 2-(2-aminophenyl)-1H-benzimidazole (L3) and 6,6-dimethyl-5H-benzimidazolyl[1,2-c]quinazoline (L4) are reported. Cobalt(II) [Co(L1)₂(CH₃COO)₂] (1) and nickel(II) [Ni(L1)₂(CH₃COO)₂] (2) acetate coordination compounds of L1 are discussed. The synthesis and the X-ray crystal structure of the new 1-(S-methylcarbodithioate)-2-aminobenzimidazole (L2) is informed, together with its cobalt(II) [Co(L2)₂Cl₂] (3), [Co(L2)₂Br₂] (4) and zinc(II) [Co(L2)₂Cl₂] (5), [Zn(L2)₂Br₂] (6) coordination compounds. In these compounds the imidazolic nitrogen is coordinated to the metal center, while the ArNH₂ and the S-methylcarbodithioate groups do not participate as coordination sites. A co-crystal of L1 and L2 is analyzed. Structural analyses of the coordination compounds of L3 showed that this ligand behaves as a bidentate ligand through the aniline and the imidazole groups forming six membered rings in the cobalt(II) [Co(L3)Cl₂] (7) and zinc(II) [Zn(L3)Cl₂] (8) compounds, as well as the nickel(II) nitrate [Ni(L3)₂(H₂O)₂](NO₃)₂ (9). The quinazoline L4 was produced by insertion of one acetone molecule and water elimination in L3, its X-ray crystal diffraction analysis, as well as that of its zinc(II) coordination compound [Zn(L4)₂Cl₂] (10), are discussed.     

STUDY ON THE SYNTHESIS AND PROPERTIES OF POLY(ESTER-IMIDEETHER)MULTIBLOCK COPOLYMERS

A new class of poly(ester-imide-ether) multiblock copolymers was synthesized by transes-terification and meltcopolymerization of dimethyl terephthalate (DMT) and N-(4-carbomethoxyphenyl)-4-(carbomethoxy)-phthalimide withethylene glycol (EG) and polytetramethylene glycol (PTMG). The structure of the above copolymers was characterized by~1H-NMR and IR spectroscopy. Some properties of the coplymers were also examined. It was found that their mechanicalproperties and heat stability, compared with poly(ether-ester) copolymers, were obviously improved.     

Poly(ethylene-glycol)-based fluorinated esters: a readily available entry for novel F-MRI agents

Readily available, low cost, hydrosoluble poly(ethylene-glycol) derivatives of 2-(trifluoromethyl)-3,3,3-trifluoro-propanoic acid were easily synthesized and their properties as MRI agents are preliminarily investigated. Two novel polymers, of 2356 Da and 756 Da, respectively, both showing a single ¹⁹F signal at NMR in deuterated chloroform and D₂O were fully characterized; both compounds were shown to be soluble in water. However when experiments of in vitro MR imaging were conducted a clear imaging was obtained only with the sample of 756 MW, pointing at the importance of the fluorine content of the carrier.     

Poly(ε‐caprolactone)‐Based Organogels and Hydrogels with Poly(ethylene glycol) Cross‐Linkings

Summary: The reaction of triphosgene with poly(ethylene glycol) yielded poly(ethylene glycol) dichloroformate. This difunctional cross‐linker was allowed to react with poly(ε‐caprolactone) bearing carbanionic sites obtained by activation with lithium diisopropylamide. The reaction resulted in the cross‐linking of poly(ε‐caprolactone) chains by poly(ethylene glycol) segments, giving copolymer networks that gel in both organic and aqueous media.

Schematic of the PCL‐g‐PEG copolymers synthesized here.     

Photo-grafting Poly(acrylic acid) onto Poly(lactic acid) Chains in Solution

Poly(lactic acid)(PLA)is one of the most important bio-plastics,and chemical modification of the already-polymerized poly(lactic acid)chains may enable optimization of its material properties and expand its application areas.In this study,we demonstrated that poly(lactic acid)can be readily dissolved in acrylic acid at room temperature,and acrylic acid can be graft-polymerized onto poly(lactic acid)chains in solution with the help of photoinitiator benzophenone under 254 nm ultraviolet(UV)irradiation.Similar photo-grafting polymerization of acrylic acid(PAA)has only been studied before in the surface modification of polymer films.The graft ratio could be controlled by various reaction parameters,including irradiation time,benzophenone content,and monomer/polymer ratios.This photo-grafting reaction resulted in high graft ratio(graft ratio PAA/PLA up to 180%)without formation of homopolymers of acrylic acid.When the PAA/PLA graft ratio was higher than 100%,the resulting PLA-g-PAA polymer was found dispersible in water.The pros and cons of the photo-grafting reaction were also discussed.     

Poly{ [4-（hydroxyl）（tosyloxyl）iodo]styrene} Promoted Halotosyloxylation Reaction of Alkynes

Halotosyloxylation reaction of alkynes with iodine or NBS or NCS was efficiently promoted by the poly { [4-(hydroxyl)(tosoyloxyl)iodo]styrene }.     

A New Poly Brominated Dibenzylphenol from Rhodomela confervoides

A new poly brominated dibenzylphenol named as rhodomevoidin was isolated from Rhodomela confervoides. Its structrue was elucidated as 3-bromo-4, 5-bis (2, 3-dibromo-4, 5-NMR techniqueshol by spectroscopic methods including IR, HRFABMS, ID and 2D NMR techniques.     

New poly(amide-lmide)s syntheses. XV. Preparation and properties of poly(amide-imide)s derived from 9, 9-bis[4-(4-aminophenoxy) phenyl]fluorene and various bis(trimellitimide)s

Fifteen bis(phenoxy) fluorene-containing poly(amide-imide)s III were synthesized by the direct polycondensation of 9,9-bis[4-(4-aminophenoxy)phenyl]fluorene (BAPPF) with var-ious aromatic bis(trimellitimide)s II in N-methyl-2-pyrrolidone (NMP) using triphenyl phosphite and pyridine as condensing agents. Poly(amide-imide)s III having inherent vis-cosities up to 1.45 dL/g were obtained in quantitative yields. Most of the resulting polymers showed an amorphous nature and were readily soluble in polar solvents such as NMP and N,N-dimethylacetamide. All the soluble poly(amide-imide)s afforded transparent, flexible, and tough films. The glass transition temperatures of these polymers were in the range of 263–315°C and the 10% weight loss temperatures were above 510°C in nitrogen. Some properties of poly(amide-imide)s III were compared with those of the corresponding isomeric poly(amide-imide)s III ′ prepared from 9,9-[4-(4-trimellitimidophenoxy)phenyl]fluorene and various aromatic diamines. © 1995 John Wiley & Sons, Inc.     

Poly(methyl methacrylate) composites prepared by in situ polymerization using organophillic nano-to-submicrometer zinc oxide particles

Nano- and submicrometer zinc(II) oxide particles were synthesized by the polyol method and were used for the preparation of ZnO/poly(methyl methacrylate) (ZnO/PMMA) composite materials by the chain polymerization of methyl methacrylate (MMA) in bulk. ZnO particles with an organophilic surface layer were homogeneously dispersed in the PMMA matrix. Very low concentrations (0.1 wt.%) of nano zinc oxide absorbed over 98% of UV light as determined by UV-vis spectroscopy. Nano zinc oxide (75 nm) increased the initial decomposition temperature of the PMMA matrix by 30-40 °C at concentrations of 0.1% and above. This was explained by the changes in the termination mechanism of MMA polymerization resulting in a reduced concentration of vinylidene chain ends. Nano ZnO also increased the MMA polymerization reaction rate and reduced the activation energy. Submicrometer ZnO showed lower UV absorption, thermal stabilization and no influence on the reaction kinetics indicating that average particle size is of vital importance for the properties of PMMA nanocomposites and for MMA polymerization.     

聚乙二醇中1-辛炔的环三聚反应

在绿色反应介质聚乙二醇中,PdCl2／CuCl2催化体系可以顺利地催化1-辛炔发生环三聚反应,区域选择性地生成1,3,5-三己基苯,该反应产率较高,对环境友好,且催化体系可以适当地重复使用．     

聚乙二醇-聚乳酸共聚物药物载体*

本文综述了聚乙二醇与聚乳酸共聚亲水改性的最新进展, 包括嵌段和星型结构聚乙二醇-聚乳酸共聚物(PEG-PLA)及其端基化衍生物的合成。同时概述了该共聚物以胶束、微粒、水凝胶和囊泡形式担载亲水、疏水及蛋白质类药物的应用,特别介绍了静电纺丝制备的PEG-PLA超细纤维载体及其释药特性。