The First Heterobimetallic Metallasilsesquioxane Derivatives of Manganese

The reaction of (c‐C₆H₁₁)₇Si₇O₉(ONa)₃, prepared in situ from (c‐C₆H₁₁)₇Si₇O₉(OH)₃ ( 1 ), and MnCl₂(THF)₂ in THF solution resulted in formation of the novel heterobimetallic Mn/Na metallasilsesquioxane complex [(c‐C₆H₁₁)₇Si₇O₉(O₃Mn)Na(Et₂O)]₂·Et₂O ( 2 ) which was isolated in the form of colorless crystals in 64 % yield. Similar treatment of MnCl₂(THF)₂ with in situ prepared (c‐C₆H₁₁)₇Si₇O₉(OLi)₃ afforded the unusual tetramanganese silsesquioxane complex [(c‐C₆H₁₁)₇Si₇O₉(O₃Mn₂Br)LiBr(THF)(Et₂O)]₂ ( 3 ) in high yield (81 %). Both 2 and 3 were structurally characterized by single‐crystal X‐ray diffraction.     

High-resoluttin 29Si NMR in solid silicates: Correlations between shielding tensor and Si-O bond length

²⁹Si NMR spectra of polycrystalline Ca₆[Si₂O₇¦(OH)₆] and [(CH₃)₄N] ₈Si₈O₂₀·69H₂O were measured using the cross polarization double-resonance technique. Observed shielding tensors are related to the known Si-O bond systems. The arrangement of the four Si-O bonds in the SiO₄ tetrahedra is reflected by the ²⁹Si shielding tensor. The most shielded direction corresponds to the shortest Si-O bond.     

Silyl‐functionalized Silsesquioxanes: New Building Blocks for Larger Si‐O‐Assemblies,including the First Si‐Si‐Bonded Silsesquioxanes

Novel silyl‐functionalized silsesquioxane building blocks have been prepared by treatment of Cy₇Si₇O₉(OH)₃ ( 1 , Cy = c‐C₆H₁₁) with hexachlorodisilane or hexachlorodisiloxane, respectively, in the presence of triethylamine. Reactions in a 1:1 molar ratio afforded the trichlorosilyl‐functionalized silsesquioxane derivatives Cy₇Si₈O₁₂SiCl₃ ( 2 ) and Cy₇Si₈O₁₂OSiCl₃ ( 3 ). Related bis(silsesquioxanes), (Cy₇Si₈O₁₂)₂ ( 4 ) and (Cy₇Si₈O₁₂)₂O ( 5 ) are accessible in a similar manner by employing a 2:1 molar ratio of the reactands. Compound 1 also served as a starting material in the preparation of the partially closed silsesquioxane cages Cy₇Si₇O₁₁(OH)SiMe₂ ( 6 ) and Cy₇Si₇O₁₁(OH)Si(OEt)₂ ( 7 ), while the related condensation product Cy₇Si₇O₁₀(OSiMe₃) ( 9 ) was made by AlCl₃‐catalyzed elimination of water from Cy₇Si₇O₉(OH)₂OSiMe₃ ( 8 ). The molecular structure of 9 was determined by X‐ray diffraction.     

Dimeric copper(II) trimethylsilyl­acetate adducts with pyridine, 2‐­methylpyridine, 3‐methylpyridine and quinoline,and a polymeric copper(II) trimethylsilylacetate

In the crystals of bis(pyridine‐N)tetrakis(μ‐trimethylsilylacetato‐O:O′)dicopper(II), [Cu₂(C₅H₁₁O₂Si)₄(C₅H₅N)₂], (I), the dinuclear Cu^II complexes have cage structures with Cu?Cu distances of 2.632 (1) and 2.635 (1) Å. In the crystals of bis(2‐­methylpyridine‐N)tetrakis(μ‐trimethylsilylacetato‐O:O′)dicopper(II), [Cu₂(C₅H₁₁O₂Si)₄(C₆H₇N)₂], (II), bis­(3‐methylpyridine‐N)tetrakis(μ‐trimethylsilylacetato‐O:O′)dicopper(II), [Cu₂(C₅H₁₁O₂Si)₄(C₆H₇N)₂], (III), and bis(quinoline‐N)­tetrakis(μ‐­trimethylsilylacetato‐O:O′)dicopper(II), [Cu₂(C₅H₁₁O₂Si)₄(C₉H₇N)₂], (IV), the centrosymmetric dinuclear Cu^II complexes have a cage structure with Cu?Cu distances of 2.664 (1), 2.638 (3) and 2.665 (1) Å, respectively. In the crystals of catena‐poly­[tetrakis(μ‐trimethylsilylacetato‐O:O′)dicopper(II)], [Cu₂(C₅H₁₁O₂Si)₄]_n, (V), the dinuclear Cu^II units of a cage structure are linked by the cyclic Cu—O bonds at the apical positions to form a linear chain by use of a glide translation.     

Phosphonium and Ammonium Polyborates

Abstract

Polyborates were prepared by slow hydrolysis of boric acid esters B(OR)₃ (R=CH₃, i-C₃H₇, n-C₄H₉, c-C₆H₁₁, n-C₈H₁₇) in organic solvents such as acetone in the presence of solutions of quaternary tetraphenylphosphonium or triphenylmethylphosphonium hydroxides. Some amines, some ammonium hydroxides or, for comparison, tetraphenylarsonium hydroxide with a small quantity of water. The basic component must be basic enough and should be bulky; the less bulky bases build pentaborates, the more bulky ones heptaborates, independent of molar ratios, if only the boron concentration is sufficient. The acetone containing pentaborates [(C₆H₅)₄P] [B₅O₆(OH)₄] 0,5 acetone and [(C₆H₅)₃PCH₃] [B₅O₆(OH)₄] 0,5 acetone were isolated, in contrary to the solvent free [(C₆H₅)₄As] [B₅O₆(OH)₄]. Heptaborates with the anion [B₇O₆(OH)₁₀] are formed with tetra-n-butyl-ammonium and tri-n-butylbenzylammonium cations.     

Crystallographic characterisation of novel Zn(II) silsesquioxane complexes and their application as initiators for the production of polylactide

Herein, the solid state structures of the products from the reaction of the silsesquioxane triol (iso-C₄H₉)₇Si₇O₁₂(OH)₃ (1) with two equivalents of ZnMe₂ in both THF and toluene are reported. In both cases tetrametallic Zn(II) complexes were isolated, with toluene [(iso-C₄H₉)₇Si₇O₁₂]₂Zn₄Me₂ (2) was prepared while performing the reaction in THF the analogous complex [(iso-C₄H₉)₇Si₇O₁₂]₂Zn₄Me₂(THF)₂ (3) was formed. Both species have also been characterised via¹H, ¹³C{¹H} and ²⁹Si{¹H} NMR spectroscopy, which confirm the solid state structures are maintained in solution. Both 2 and 3 show modest activities for the polymerisation of rac-lactide and a heterogeneous catalyst has also been prepared.     

Determination of the changes of the basic structures of silica species in dependence on the concentration of sodium chloride by FAB-MS

The chemical species of silica in NaCl solutions of different concentrations were identified by FAB-MS (fast atom bombardment mass spectrometry). The basic structures of silica species, such as cyclic pentamer (Si₅¶(OH)₉O₆ ^–), linear pentamer (Si₅(OH)₁₁O₅ ^–), cyclic hexamer (Si₆(OH)₉O₈ ^–, Si₆(OH)₁₁O₇ ^–) and linear hexamer (Si₆(OH)₁₄O₆ ^–), were identified, in addition to dimer (Si₂(OH)₅O₂ ^–), trimer (Si₃(OH)₇O₃ ^–) and cyclic tetramer (Si₄(OH)₇O₅ ^–). The patterns of changes of the peak intensities of the silicate complexes relative to the dimer with increasing NaCl concentration were classified into two types: that represented by linear silicate complexes and the other by cyclic silicate complexes. The differences in the type of chemical species and their changes according to the NaCl concentration reflect the number of bonds necessary for polymerization and hydrolysis of the silica complexes. The differences between the linear and the cyclic silicate type have some implications on the dissolution mechanism of silicate complexes, the hydration of the molecules and the equilibrium between solubility, hydrolysis, polymerization and the salting-out effect in NaCl solution.     

Darstellung und Struktur der Zweikernigen tert-Butyliminovanadium(IV)-Komplexe [(μ?NtC4H9)2V2(CH2CMe3)2X2] (X = OtC4H9, CH2CMe3)

Synthesis and Molecular Structure of the Binuclear tert-Butyliminovanadium(IV) Complexes [(μ-N^tC₄H₉)₂V₂(CH₂CMe₃)₂X₂] (X = O^tC₄H₉, CH₂CMe₃) Syntheses of the neopentylvanadium(V) compounds ^tC₄H₉N?V(CH₂CMe₃)_3?n(O^tC₄H₉)_n (n = 0 ( 7 ), 1 ( 6 ), 2) are described. 6 and 7 decompose by irradiation splitting off neopentane and yielding the binuclear diamagnetic neopentylvanadium(IV) complexes [(μ-N^tC₄H₉)₂V₂(CH₂CMe₃)₂X₂] [X = O^tC₄H₉ ( 8 ), CH₂CMe₃ ( 11 )]. All compounds obtained are characterized by ¹H and ⁵¹V NMR spectroscopy. 8 has been found by X-ray diffraction analysis to be a binuclear complex with bridging tert-butylimino ligands and a vanadium—vanadium single bond. The complexes ^tC₄H₉N?V(CH₂C₆H₅)(O^tC₄H₉)₂ and [(μ-N^tC₄H₉)₂V₂(CH₂SiMe₃)₂(O^tC₄H₉)₂] ( 10 ) have been also prepared; the crystal structure of 8 and 10 are nearly identical.     

Über die Reaktion des käfigartigen Kieselsäurederivats [(CH3)2HSi]8Si8O20 mit ungesättigten organischen Verbindungen

Reaction of the Cage-like Silicic Acid Derivative [(CH₃)₂HSi]₈Si₈O₂₀ with Unsaturated Organic Compounds By ²⁹Si, ¹H, and ¹³C NMR investigations were shown that the eight HSi?groups of the double four-ring silicic acid derivative [(CH₃)₂HSi]₈Si₈O₂₀ react with the following unsaturated compounds: vinylcyclohexene, allyl glycidyl ether, methyl methacrylate, octadecene-1, and styrene. The resulting oily products are soluble in organic solvents. The compounds were characterized by the chemical shifts of the ²⁹Si, ¹H, and ¹³C NMR signals. Their formulae are [C₆H₉(CH₂)₂Si(CH₃)₂]₈Si₈O₂₀, [CH₃OOCCH(CH₃)CH₂Si(CH₃)₂]₈Si₈O₂₀, [CH₃(CH₂)₁₇Si(CH₃)₂]₈Si₈O₂₀ and [C₆H₅(CH₂)₂Si(CH₃)₂]₈Si₈O₂₀, and [C₆H₅CH(CH₃)Si(CH₃)₂]₈ Si₈O₂₀, respectively. Mainly the addition reactions do not follow the Markovnikov rule.     

A fluoro­phenylboron‐functionalized zirconium silsesquioxane complex

Bis(η⁵‐cyclo­penta­dienyl)[rel‐(1R,5S,7R,14S)‐(1,3,5,7,9,11,14‐hepta­cyclo­pentyl‐7,14‐dioxidotri­cyclo­[7.3.3^1,9.1^5,11]­hepta­siloxan‐3‐yloxy)­bis­(penta­fluoro­phenyl)­borane(2−)]­zirconium, [Zr(C₅H₅)₂(C₄₇H₆₃BF₁₀O₁₂Si₇)], consists of [ZrCp₂] (Cp is cyclopentadienyl) and [(C₆F₅)₂B] moieties bound to a silsesquioxane core. The silsesquioxane binds to the Zr atom through two of its O atoms to form a distorted tetrahedron. The [(C₆F₅)₂B] moiety is bound to the silsesquioxane through an O atom, forming an Si—O—B bond angle of 168.4 (4)°. The steric and electronic effects of the Zr atom and the borate moieties force the silsesquioxane core to distort. These distortions can be seen by examination of the Si—O—Si bond angles.     

Synthesis of macrocyclic tris-cis-tris-trans- dodeca[(phenyl)(hydroxy)]cyclododecasiloxane in carbonic acid solution

The possibility to synthesize stereoregular tris-cis-tris-trans- dodeca[(phenyl)(hydroxy)]cyclododecasiloxane (tris-cis-tris-trans-[PhSi(O)OH]12) in an inorganic liquid medium – aqueous carbonic acid solution – was shown. The interaction of polyhedral phenylcoppersodiumsiloxane, {[(C₆H₅Si(O)O^?]₁₂(Cu₂⁺)₄(Na⁺)₄}*(L)_m (L?=?Buⁿ OH, H₂O), with carbonic acid can be considered as a new ‘green’ method to obtain functional organosiloxane macrocycles. In contrast to the known methods, no organic solvents were used during the reaction. The identification of the structure of the end compound was performed by means of NMR and Infrared spectroscopy as well as X-ray crystallography.     

Syntheses,structures, and magnetism of {V15M6O42(OH)6(Cl)} (M = Si,Ge)

Two [V₁₅M₆(OH)₆O₄₂(Cl)]^7? (M = Si for 1, Ge for 2) cluster anions with protonated amines as counterions have been synthesized under hydrothermal conditions and characterized by FT-IR, energy dispersive spectroscopy, XPS, powder X-ray diffraction, thermogravimetric analysis (TGA), elemental analysis, and single-crystal X-ray analyses. Both compounds consist of {V₁₅M₆O₄₂(OH)₆(Cl)} (M = Si for 1, Ge for 2), which are derived from {V₁₈O₄₂} by substitution of three {VO₅} square pyramids with three {Si₂O₅(OH)₂/Ge₂O₅(OH)₂} units. It represents the first example of cage-like polyoxovanadates (POVs) containing three (Si/Ge)₂O₅(OH)₂ units. There are extensive hydrogen bonding interactions between POVs and organoamines in 1 and 2. Compound 1 presents a close-packed layer aggregate, while 2 exhibits the packing of six-membered rings with a 1-D channel. Magnetism measurements demonstrate the presence of strong antiferromagnetic interaction between V^IV centers in 1.     

Compounds of WVI with 1(+)-sorbitol: Study of formation and interconversion equilibria

Summary The polarimetric study of the W^VI-sorbitol system shows the formation of three stable complexes. The species stable at higher pH is monomeric ([WO(OH)(C₆H₁₂O₆)₂]^–), while the other two are dinuclear complexes of different stoichiometries ([W₂O₃(OH)₄(C₆H₁₀O₆)]^–2 and [W₃O₃(OH)(C₆H₁₁O₆)₂]^–). The interconversion equilibria have been established and the formation constants determined. The behaviour of sorbitol is like that displayed by other polyhydroxylic ligands having one or two carboxylic groups. The substitution of a carboxylic group for an alcoholic one seems only to result in lower stability constants for the complexes formed.     

A DFT study of uranyl hydroxyl complexes: structure and stability of trimers and tetramers

A DFT study of U(VI) hydroxy complexes was performed with special attention paid to the [(UO₂)₃(OH)₅(H₂O)_4–7]⁺ and [(UO₂)₄(OH)₇(H₂O)_5–8]⁺ species. It was established that the ionicity of the U=O bond increased when moving from [(UO₂)(H₂O)₅]²⁺, [(UO₂)₂(OH)(H₂O)₈]³⁺, [(UO₂)₂(OH)₂(H₂O)₆]²⁺, [(UO₂)₃(OH)₅(H₂O)_4–6]⁺ to [(UO₂)₄(OH)₇(H₂O)_5–8]⁺ species. In both [(UO₂)₃(OH)₅(H₂O)_4–6]⁺ and [(UO₂)₄(OH)₇(H₂O)_5–8]⁺ complexes, the U=O bond was observed to have a range of different lengths which depended on the composition of the first coordination sphere of UO₂ ²⁺. The cyclic structures of trimeric complexes were somewhat more stable than their linear structures, which was probably due to the steric effect.

     

Solid-state Al and Si NMR characterization of hydrates formed in calcium aluminate-silica fume mixtures

Partially deuterated Ca₃Al₂(SiO₄)_y(OH)_12−4y-Al(OH)₃ mixtures, prepared by hydration of Ca₃Al₂O₆ (C₃A), Ca₁₂Al₁₄O₃₃ (C₁₂A₇) and CaAl₂O₄ (CA) phases in the presence of silica fume, have been characterized by ²⁹Si and ²⁷Al magic-angle spinning-nuclear magnetic resonance (MAS-NMR) spectroscopies. NMR spectroscopy was used to characterize anhydrous and fully hydrated samples. In hydrated compounds, Ca₃Al₂(OH)₁₂ and Al(OH)₃ phases were detected. From the quantitative analysis of ²⁷Al NMR signals, the Al(OH)₃/Ca₃Al₂(OH)₁₂ ratio was deduced. The incorporation of Si into the katoite structure, Ca₃Al₂(SiO₄)_3−x(OH)_4x, was followed by ²⁷Al and ²⁹Si NMR spectroscopies. Si/OH ratios were determined from the quantitative analysis of ²⁷Al MAS-NMR components associated with Al(OH)₆ and Al(OSi)(OH)₅ environments. The ²⁹Si NMR spectroscopy was also used to quantify the unreacted silica and amorphous calcium aluminosilicate hydrates formed, C-S-H and C-A-S-H for short. From ²⁹Si NMR spectra, the amount of Si incorporated into different phases was estimated. Si and Al concentrations, deduced by NMR, transmission electron microscopy, energy dispersive spectrometry, and Rietveld analysis of both X-ray and neutron data, indicate that only a part of available Si is incorporated in katoite structures.     

Di­methyl(2‐methyl­phenyl)­ammonium hydroxo­tris­(penta­fluoro­phenyl)­borate

In the title compound, [(CH₃)₂(C₇H₇)NH][(C₆F₅)₃B(OH)] or C₉H₁₄N⁺·C₁₈HBF₁₅O^?, the distorted tetrahedral borate anions are strongly hydrogen bonded to the substituted ammonium cations. The N?O separation in the N—H?O hydrogen bond is 2.728 (3) Å.     

Synthesis and crystal structure of Ir(C2H4)2(C5H7O2)

We report a new synthesis and characterization of Ir(C₂H₄)₂(C₅H₇O₂) [(acetylacetonato)-bis(η²-ethene)iridium(I)], prepared from (NH₄)₃IrCl₆ · H₂O in a yield of about 45%. The compound has been characterized by X-ray diffraction crystallography, infrared, Raman, and NMR spectroscopies and calculations at the level of density functional theory. Ir(C₂H₄)₂(C₅H₇O₂) is isostructural with Rh(C₂H₄)₂(C₅H₇O₂), but there is a substantial difference in the ethylene binding energies, with Ir-ethylene having a stronger interaction than Rh-ethylene; two ethylenes are bound to Ir with a binding energy of 94 kcal/mol and to Rh with a binding energy of 70 kcal/mol.     

Macrocyclic organotin(IV) carboxylates based on benzenedicarboxylic acid derivatives: Syntheses, crystal structures and antitumor activities

Six new organotin carboxylates based on 1,3-benzenedicarboxylic acid and 1,4-benzenedicarboxylic acid derivatives, namely (Ph₃Sn)₂(2,5-L¹)(C₂H₅OH)₂ (1) (2,5-H₂L¹ = 2,5-dibenzoylterephthalic acid), (Ph₃Sn)₂(2,5-L²)(C₂H₅OH)₂ (2) (2,5-H₂L² = 2,5-bis(4-methylbenzoyl)terephthalic acid), (Ph₃Sn)₂(2,5-L³)(C₂H₅OH)₂ (3) (2,5-H₂L³ = 2,5-bis(4-ethylbenzoyl)terephthalic acid), [(n-Bu₂Sn)₄(4,6-L¹)O₂(OH)(OC₂H₅)]₂·2(C₂H₅OH) (4) (4,6- H₂L¹ = 4,6-dibenzoylisophthalic acid), [(n-Bu₂Sn)₄(4,6-L¹)O₂(OH)(OC₄H₉)]₂·2(C₄H₉OH) (5) and [(n-Bu₂Sn)₄(4,6-L²)O₂(OH)(OC₂H₅)]₂·2(C₂H₅OH) (6) (4,6-H₂L² = 4,6-bis(4-methylbenzoyl)isophthalic acid), have been synthesized. All the organotin carboxylates have been characterized by elemental analysis, IR, ¹H and ¹³C NMR spectroscopy and X-ray crystallography diffraction analyses. The structural analysis reveals that complexes 1-3 show similar structures, containing binuclear triorganotin skeletons. The significant intermolecular O-H?O hydrogen bonds linked the complexes 1-3 to form a novel 2D network polymer with 38-member macrocycles. In complexes 4-6, two Sn₄O₄ ladders are connected by two 1,3-benzenedicarboxylic acid derivatives to yield ladder-like octanuclear architectures and form macrocycle with 24 atoms. In addition, the antitumor activities of complexes 1-6 have been studied.     

CO2 Fixation and Transformation by a Dinuclear Copper Cryptate under Acidic Conditions

CO₂ fixation and transformation by metal complexes continuously receive attention from the viewpoint of carbon resources and environmental concerns. We found that the dinuclear copper(II) cryptate [Cu₂L¹](ClO₄)₄ ( 1 ; L¹=N[(CH₂)₂NHCH₂(m‐C₆H₄)CH₂NH‐(CH₂)₂]₃N) can easily take up atmospheric CO₂ even under weakly acidic conditions at room temperature and convert it from bicarbonate into carbonate monoesters in alcohol solution. The compounds [Cu₂L¹(μ‐O₂COH)](ClO₄)₃ ( 2 ), [Cu₂L¹(μ‐O₂COR)](ClO₄)₃ ( 3 : R=CH₃; 4 : R=C₂H₅; 5 : R=C₃H₇; 6 : R=C₄H₉; 7 : R=C₅H₁₁; 8 : R=CH₂CH₂OH), [Cu₂L¹(μ‐O₂CCH₃)](ClO₄)₃ ( 9 ), and [Cu₂L¹(OH₂)(NO₃)](NO₃)₃ ( 10 ) were characterized by IR spectroscopy and ESI‐MS. The crystal structures of 2 – 6 and 10 were studied by single‐crystal X‐ray diffraction analysis. On the basis of the crystal structures, solution studies, and DFT calculations, a possible mechanism for CO₂ fixation and transformation is given.     

Cage‐like Copper(II) Silsesquioxanes: Transmetalation Reactions and Structural,Quantum Chemical,and Catalytic Studies

The transmetalation of bimetallic copper–sodium silsesquioxane cages, namely, [(PhSiO_1.5)₁₀(CuO)₂(NaO_0.5)₂] (“Cooling Tower”; 1 ), [(PhSiO_1.5)₁₂(CuO)₄(NaO_0.5)₄] (“Globule”; 2 ), and [(PhSiO_1.5)₆(CuO)₄(NaO_0.5)₄(PhSiO_1.5)₆] (“Sandwich”; 3 ), resulted in the generation of three types of hexanuclear cylinder‐like copper silsesqui‐ oxanes, [(PhSiO_1.5)₁₂(CuO)₆(C₄H₉OH)₂(C₂H₅OH)₆] ( 4 ), [(PhSiO_1.5)₁₂(CuO)₆(C₄H₈O₂)₄(PhCN)₂(MeOH)₄] ( 5 ), and [(PhSiO_1.5)₁₂(CuO)₆(NaCl)(C₄H₈O₂)₁₂(H₂O)₂] ( 6 ). The products show a prominent “solvating system–structure” dependency, as determined by X‐ray diffraction. Topological analysis of cages 1 – 6 was also performed. In addition, DFT theory was used to examine the structures of the Cooling Tower and Cylinder compounds, as well as the spin density distributions. Compounds 1 , 2 , and 5 were applied as catalysts for the direct oxidation of alcohols and amines into the corresponding amides. Compound 6 is an excellent catalyst in the oxidation reactions of benzene and alcohols.