Purification of waste waters containing 60Co2+, 115mCd2+ and 203Hg2+ radioactive ions by ETS-4 titanosilicate

Summary The sorption of ⁶⁰Co²⁺, ^115mCd²⁺ and ²⁰³Hg²⁺ from diluted solutions (as analogues for radioactive waste waters) on ETS-4 microporous titanosilicate was studied at 277, 293, 313 and 333 K by measuring the sorption kinetics using a batch-method. The sorption of these radiocations was compared by means of the distribution coefficient and of the sorption capacity. The maximum sorption capacities follow the order: ²⁰³Hg²⁺>^115mCd²⁺3⁶⁰Co²⁺. The thermodynamic functions of the sorption processes have been estimated. The increase of the absolute value of DG° with increasing temperatures shows that higher temperatures favor ionic exchange.     

On the crystallization mechanism of ETS-10 titanosilicate synthesized in gels containing TAABr

Thermal analysis of the products resulted during crystallization of ETS-10 by using starting co gels with molar composition 5.0 Na₂O-3.0 KF-TiO₂-6.4 HCl-TAABr-7.45 SiO₂-197.5 H₂O, where tetralkylammonium (TAA) are tetramethyl (TMA), tetraethyl (TEA), tetrapropyl (TPA) and tetrabutylammonium (TBA), was performed. The effect of TAA⁺ cations (ionic radius in hydrated forms, shapes and hydrophilic/hydrophobic character) on the crystallization of ETS-10 is evident from the induction time, t_i (TMA⁺ ? TEA⁺ < TPA⁺ < TBA⁺), the rate of crystallization, R (TMA⁺ < TEA⁺ < TPA⁺ < TBA⁺), morphology and size of crystallites. Organic cations play a “pore filling” role rather than as a “structure-directing” agent. The relatively flexible molecules of the symmetric tetraalkylammonium cations mixed with alkali cations (Na⁺, K⁺) participate directly at prenucleation and nucleation steps by their interaction with the silicate and titanate in aqueous colloidal dispersion.     

Sorption of Cations of the Zn2+-Hg2+-NO3--H2O System by Biomass of Ostreatus Agaricaceae Basidiomycete and KB-4(H+) Cation Exchanger

Sorption of cations of the Zn²⁺-Hg²⁺-NO₃ ^--H₂O system by the biomass of basidiomycete (line 21 Pl. ostreatus f. florida) and by KB-4(H⁺) cation exchanger at pH 1.00 was studied. The results are discussed with regard to the state of cations in the solution before contact with the sorbent, sorbent properties, and sorption behavior of cations.     

Nickel(II) sorption on hydrous silica: A kinetic and thermodynamic study

Summary Sorption of nickel, Ni²⁺, on SiO₂ ^. xH₂O (silica gel) has been studied as a function of time conditions: amount of silica gel: 0.10-1.00 g, nickel concentration: 5.00 ^. 10^-5-1.20 ^. 10^-3M, ionic strength: 0.20-1.40M NaClO₄, pH 6.50 to 8.50, and temperature 273-318 K. From the kinetic data, the diffusion coefficient of Ni²⁺ ion was calculated to be 1.28(±0.07) ^. 10^-11 m^{2 .} s^-1 under particle diffusion-controlled conditions. The sorption rate was determined as 3.79(±0.35) ^. 10^-3 s^-1 at 298 K, pH 8.40 in 0.20M (NaClO₄). The sorption data were fitted to Freundlich, Langmuir and Dubinin-Radushkevich (D-R) isotherms. Nickel sorption on 0.20 g silica gel decreased with ionic strength from 77.70±0.70% (0.20M NaClO₄) to 16.12±0.37% (1.40M NaClO₄) at intial pH of 8.50±0.05. A gradual decrease in pH with increasing ionic strength suggests an ion exchange mechanism and the sorption of Ni²⁺ on silica gel increasing with temperature indicates an endothermic enthalpy. The effect of different ligands such as fluoride, carbonate, phosphate and oxalate on Ni²⁺ sorption on silica gel was studied.     

Layered hydrous manganese dioxide saturated with alkaline-earth cations: Synthesis and sorption properties

Layered compounds based on hydrous manganese dioxides (hereafter, Mn-phases) saturated with alkaline-earth cations were synthesized at 3–6°C. These phases are analogues of manganese minerals from oceanic iron-manganese sediments (vernadite, birnessite, buserite-I, an asbolan-like phase, and a hybrid phase). All the Mn-phases, as a rule, had poorly ordered structures. The sorption properties of these phases were studied with respect to alkali-metal cations (Na⁺, K⁺), an s-metal cation (Ba²⁺), a p-metal cation (Pb²⁺), and d-metal cations (Mn²⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺ and Cd²⁺). The exchange capacities of the Mn-phases were 0.45–1.06 mg-equiv/g for the alkali cations and 0.94–5.78 mg-equiv/g for the other cations. The phase composition of the Mn-phase did not affect the alkali cation sorption but affected the divalent cation sorption. The divalent cation exchange capacity increased from well-ordered birnessite to poorly ordered vernadite.     

Hydroxo Complex Formation in the Fe3+-Hg2+-NO3 --H2O System

Hydrolysis of the Fe³⁺-Hg²⁺-NO₃ ^--H₂O system was studied by spectrophotometry, pH-metric titration, and sorption methods. The mutual influence of the cations on the hydrolytic and sorption behavior was discussed in terms of heteronuclear complex formation.     

Sorption of uranyl ion on hydrous silica: Effects of ionic strength and ethylenediaminetetraacetic acid (EDTA)

The effects of ionic strength and of ethylenediamin et etraacetic acid (EDTA) on the sorption of uranyl ion, UO₂ ²⁺, to SiO₂·xH₂O (silica gel) were investigated. It was observed that pH and the ions present in the supporting electrolytes influence the ionic strength effects. The presence of different sodium salts in the concentration range (0.20 to 1.40M) suppressed the sorption of UO₂ ²⁺ in the order: NaNO₃ < NaClO₄ < NaCl < NaOCOCH₃ < Na₂SO₄ [pH 2.75(±0.05)], while the presence of perchlorate salts of Li⁺, Na⁺ and Ca²⁺ (0.20 to 1.40M) promoted the sorption of UO₂ ²⁺ on silica gel in the order: LiClO₄∼NaClO₄<Ca(ClO₄)₂ at pH 2.80(±0.05). The ionic strength effect on UO₂ ²⁺ sorption was studied in presence of EDTA (0–1.00·10⁻³M) in the pH range 2.90 to 5.57. The sorption data and speciation calculation suggest negligible complexation of UO₂ ²⁺ with EDTA at I≥1.00M NaClO₄. On leave from Radiochemistry Division, Bhabha Atomic Research Centre, Trombay, Mumbai, 400 085, India.     

The Enthalpy and Kinetics of Sorption on VION Fibrous Chemisorbents

The enthalpy and kinetics of interaction of acids and alkalis with VION KN-1 and VION AN-1 weakly ionized fibrous chemisorbents were determined by the calorimetric and sorption techniques. The interaction of the chemisorbents, no matter what their initial form, with acids and alkalis was exothermic, and the maximum thermal effect was attained within the initial period of 10–20 min. The sorption of Cu²⁺, Co²⁺, Ni²⁺, Zn²⁺, and Cd²⁺ by the salt (Na) form of the cation exchanger was endothermic, and the enthalpy of the process depended on the nature of metal cations and their concentration in solution. Original Russian Text ? V.D. Kopylova, O.M. Zverev, A.V. Astapov, Yu.S. Peregudov, 2008, published in Zhurnal Fizicheskoi Khimii, 2008, Vol. 82, No. 4, pp. 739–744.     

Adsorption de CO2 par des zeolithes X echangees par des cations bivalents

Adsorption of carbon dioxide by X zeolites exchanged with bivalent cations. The adsorption of carbon dioxide by X zeolites exchanged by Mg²⁺, Sr²⁺, Zn²⁺ and Cu²⁺ cations was studied by thermogravimetry. The corresponding isosteric heats of adsorption decrease with the filling of pore volume, except for Cu(63)X. This evolution of the heat indicates a specific interaction between cations present within supercages and CO₂ molecules. Several models have been used in order to describe the experimental isotherms. The best fit of sorption isotherm data was obtained with the Sips model.     

Sorption studies of europium(III) on hydrous silica

Summary Sorption behavior of europium, Eu³⁺, on SiO₂ ^. xH₂O (silica gel) has been investigated as a function of time, the amount of silica gel, Eu³⁺ concentration, the ionic strength, and pH (in absence and in presence of carbonate). The sorption data were fitted to Freundlich, Langmuir and Dubinin-Radushkevich (D-R) isotherms. The sorption capacity of silica gel was determined to be in the range of (2.62-8.00) ^. 10^-7 mol/g at pH 5.30±0.05 and 0.20M NaClO₄. The mean energy of sorption was calculated to be 13.50±0.05 kJ/mol from the D-R isotherm, suggesting the involvement of ion-exchange reactions in the sorption process. Sorption of Eu³⁺ decreased with increased ionic strength. A gradual decrease in pH with increased ionic strength supports the involvement of an ion-exchange mechanism in the sorption process. The diffusion coefficient of Eu³⁺ ion on silica gel was calculated as (3.98±0.12) ^. 10^-13 m^{2 .} s^-1 under the particle diffusion-controlled conditions.     

Studies on the ion-exchange behaviour of chromium ferrocyanide

The sorption of univalent, bivalent and trivalent ions has been studied on chromium ferrocyanide gel. The studies reveal a high sorption capacity for Cs⁺, Tl⁺, Ag⁺, Cu²⁺, Zn²⁺, Cd²⁺, Fe³⁺ and Th⁴⁺. The sorption of monovalent cations show purely ion-exchange mechanism while the uptake of bivalent and trivalent cations is non-equivalent in nature. Single elution of Rb⁺, Cs⁺ and Tl⁺ has been performed from the columns of this exchanger and the recovery is almost complete in all the cases. Cu²⁺ and Ag⁺ get completely adsorbed on the gel column and their elution is not possible probably due to the formation of some new solid phases. Depending on the K_d values of the metal ions, a large number of separations of radiochemical as well as analytical importance can be performed on the columns of this exchanger material.     

Sorption of cesium from water solutions on potassium nickel hexacyanoferrate-modified <Emphasis Type="Italic">Agaricus bisporus</Emphasis> mushroom biomass

In order to gain biosorbent that would have the ability to bind cesium ions from water solution effectively, potassium nickel hexacyanoferrate(II) (KNiFC) was incorporated into the mushroom biomass of Agaricus bisporus. Cesium sorption by KNIFC-modified A. bisporus biosorbent was observed in batch system, using radiotracer technique using ¹³⁷Cs radioisotope. Kinetic study showed that the cesium sorption was quite rapid and sorption equilibrium was attained within 1 h. Sorption kinetics of cesium was well described by pseudo-second order kinetics. Sorption equilibrium was the best described by Freundlich isotherm and the distribution coefficient was at interval 7,662–159 cm³ g⁻¹. Cesium sorption depended on initial pH of solution. Cesium sorption was very low at pH₀ 1.0–3.0. At initial pH 11.0, maximum sorption of cesium was found. Negative effect of monovalent (K⁺, Na⁺, NH₄ ⁺) and divalent (Ca²⁺, Mg²⁺) cations on cesium sorption was observed. Desorption experiments showed that 0.1 M potassium chloride is the most suitable desorption agent but the complete desorption of cesium ions from KNiFC-modifed biosorbent was not achieved.     

Impact of photogenerated charge behaviors on luminescence of Eu3+-incorporated microporous titanosilicate ETS-10

A series of Eu³⁺-incorporated ETS-10 samples were successfully prepared based on the traditional ion exchange method. The relationship between photogenerated charge behaviors and luminescent properties has been investigated in detail. It has been demonstrated that as a result of the charge transfer from the titanate quantum wires to Eu³⁺ crystal field states, the host matrix ETS-10 functions as the sensitizer of Eu³⁺ to enhance the red luminescence, while Eu³⁺ cations contribute to the recombination of photogenerated charges. The behavior of photogenerated charges has significant impact on the luminescent properties of Eu³⁺-incorporated ETS-10 materials.     

Study of Complex Formation Between 18-Crown-6 and Pb2+, Tl+ and Cd2+ Cations in Binary Aqueous/Non-aqueous Solvents Using Polarographic Techniques (DPP and SWP)

The complexation of Pb²⁺, Tl⁺ and Cd²⁺ cationsby 18-crown-6 was studied in water/propanol (H₂O/PrOH),water/acetonitrile (H₂O/AN) and water/dimethylformamide(H₂O/DMF) binary systems at 20 °C using squarewave polarography (SWP) and differential pulse polarography (DPP).It was confirmed that the stoichiometry of each of the complexes formed between 18C6 and the respective cations is 1 : 1. The formation constants of the complexes were found to increase with increasing concentration of the non-aqueous solvent. In all cases, a stability order of Pb²⁺ > Tl⁺ > Cd²⁺ was observed. In general,the stabilities of individual complexes were found to decrease as the binary solvent mixture varied from H₂O/AN to H₂O/PrOH to H₂O/DMF.     

Cellulose functionalized with 8-hydroxyquinoline: new method of synthesis and applications as a solid phase extractant in the determination of metal ions by flame atomic absorption spectrometry

8-Hydroxyquinoline has been immobilized on cellulose via a moderate size NHCH₂CH₂NHSO₂C₆H₄NN linker and the resulting macromolecular chelator (and intermediates) characterized by infrared spectrometry, cross-polarization magic angle spinning (CPMAS) NMR spectrometry and thermogravimetric analysis (TGA). It has been used for enrichment of Cu(II), Zn(II), Fe(III), Ni(II), Co(II), Cd(II) and Pb(II) prior to their determination by flame atomic absorption spectrometry (FAAS), which are quantitatively sorbed (recoveries>97%) at pH 4.2-6.7, 4.2-7.5, 2.0-3.0, 5.3-6.7, 5.3-6.2, 6.2-9.0 and 4.2-5.3, respectively. The sorption capacity for the seven cations varies from 93.8 to 629.9 μmol g⁻¹. HCl or HNO₃ (1 mol dm⁻³) may be used to desorb all the cations. The optimum flow rate for sorption and desorption has been found to be 2-4 cm³ min⁻¹. The tolerance limits of electrolytes NaCl, NaBr, NaNO₃, Na₂SO₄, Na₃PO₄ and cations Ca²⁺ and Mg²⁺ (added as chloride and sulphate, respectively) in the sorption of all these metal ions are reported. The preconcentration factor is between 90 and 300. Simultaneous sorption of the cations other than iron(III) is possible if their total concentration does not exceed sorption capacity. The present matrix coupled with FAAS has been used to enrich and determine the seven metal ions in river water samples (R.S.D.<7.4%) and water samples having a composition similar to certified water sample SLRS-4 (NRC, Canada) with R.S.D. ∼2.3%.     

Study of Complex Formation Between Dicyclohexano-18-Crown-6 (DCH18C6) with Mg 2+, Ca2+, Sr 2+, and Ba2+ Cations in Methanol–Water Binary Mixtures Using Conductometric Method

The complexation reactions between Mg²⁺,Ca²⁺,Sr²⁺ and Ba²⁺ metal cations with macrocyclic ligand, dicyclohexano-18-crown-6 (DCH18C6) were studied in methanol (MeOH)–water (H₂O) binary mixtures at different temperatures using conductometric method . In all cases, DCH18C6 forms 1:1 complexes with these metal cations. The values of stability constants of complexes which were obtained from conductometric data show that the stability of complexes is affected by the nature and composition of the mixed solvents. While the variation of stability constants of DCH18C6-Sr ²⁺ and DCH18C6-Ba²⁺versus the composition of MeOH–H₂O mixed solvents is monotonic, an anomalous behavior was observed for variations of stability constants of DCH18C6-Mg²⁺ and DCH18C6-Ca²⁺ versus the composition of the mixed solvents. The values of thermodynamic parameters (ΔH_c°, ΔS_c°) for complexation reactions were obtained from temperature dependence of formation constants of complexes using the van’t Hoff plots. The results show that in most cases, the complexation reactions are enthalpy stabilized but entropy destabilized and the values of thermodynamic parameters are influenced by the nature and composition of the mixed solvents. The obtained results show that the order of selectivity of DCH18C6 ligand for metal cations in different concentrations of methanol in MeOH–H₂O binary system is: Ba²⁺>Sr²⁺>Ca²⁺> Mg²⁺.     

Specific Sorption Sites for Nitrogen in Zeolites NaLSX and LiLSX

Specific sorption sites for nitrogen, N₂, in NaLSX and LiLSX zeolites were investigated using a DRIFT spectroscopic method. Sorption of molecular hydrogen, H₂, by NaLSX or LiLSX zeolite at 77 K with DRIFT control of perturbation of sorbed molecules allowed to discriminate two or three different types of specific sorption sites in the respective zeolites. Their H–H stretching frequencies are 4077 and 4081 cm^–1 for NaLSX, and 4061, 4084 and 4129 cm^–1 for LiLSX. With reference to an independent investigation by methods of both sorption thermodynamics and molecular modeling for N₂ sorption on LiLSX, the first two of the corresponding bands were ascribed to H₂ sorption on lithium cations, Li⁺, localized in supercages of the faujasite, FAU, zeolite framework at sites SIII and SIII, while the latter band most likely belongs to H₂ sorption on Li⁺ cations at sites SII, and on hydroxyl groups, OH. Sorption of N₂ by Li⁺ cations at sites SIII and SIII is the strongest, resulting in a decrease of intensity of the corresponding DRIFT bands that stem from subsequent H₂ sorption. Nitrogen sorption by Li⁺ cations at sites SII is much weaker. Sorption of N₂ on Na⁺ cations at sites SIII in NaLSX zeolite is also stronger than by Na⁺ cations at sites SII.     

Study of Complex Formation between N-Phenylaza-15-Crown-5 with Mg2+, Ca2+, Ag+ and Cd2+ Metal Cations in Some Binary Mixed Aqueous and Non-aqueous Solvents using the Conductometric Method

The complexation reactions between Mg²⁺, Ca²⁺, Ag⁺ and Cd²⁺ metal cations with N-phenylaza-15-crown-5 (Ph-N15C5) were studied in acetonitrile (AN)–methanol (MeOH), methanol (MeOH)–water (H₂O) and propanol (PrOH)–water (H₂O) binary mixtures at different temperatures using the conductometric method. The conductance data show that the stochiometry of all of the complexes with Mg²⁺, Ca²⁺, Ag⁺ and Cd²⁺ cations is 1:1 (L:M). The stability of the complexes is sensitive to the solvent composition and a non-linear behaviour was observed for variation of log K _f of the complexes versus the composition of the binary mixed solvents. The selectivity order of Ph-N15C5 for the metal cations in neat MeOH is Ag⁺>Cd²⁺>Ca²⁺>Mg²⁺, but in the case of neat AN is Ca²⁺>Cd²⁺>Mg²⁺>Ag⁺. The values of thermodynamic parameters (ΔH _c ^o , ΔS _c ^o ) for formation of Ph-N15C5–Mg²⁺, Ph-N15C5–Ca²⁺, Ph-N15C5–Ag⁺ and Ph-N15C5–Cd²⁺ complexes were obtained from temperature dependence of stability constants and the results show that the thermodynamics of complexation reactions is affected by the nature and composition of the mixed solvents.     

The Arrangement of First- and Second-shell Water Molecules Around Metal Ions: Effects of Charge and Size

Structural features of clusters involving a metal ion (Li⁺, Na⁺, Be²⁺, Mg²⁺, Zn²⁺, Al³⁺, or Ti⁴⁺) surrounded by a total of 18 water molecules arranged in two or more shells have been studied using density functional theory. Effects of the size and charge of each metal ion on the organization of the surrounding water molecules are compared to those found for a Mg[H₂O]₆²⁺• [H₂O]₁₂ cluster that has the lowest known energy on the Mg²⁺• [H₂O]₁₈ potential energy surface (Markham et al. in J Phys Chem B 106:5118–5134, 2002). The corresponding clusters with Zn²⁺ or Al³⁺ have similar structures. In contrast to this, clusters with a monovalent Li⁺ or Na⁺ ion, or with a very small Be²⁺ ion, differ in their hydrogen-bonding patterns and the coordination number can decrease to four. The tetravalent Ti⁴⁺ ionizes one inner-shell water molecule to a hydroxyl group leaving a Ti⁴⁺(H₂O)₅ (OH⁻) core, and an H₃O⁺• • • H₂O moiety dissociates from the second shell of water molecules. These observations highlight the influence of cation size and charge on the local structure of hydrated ions, the high-charge cations causing chemical changes and the low-charge cations being less efficient in maintaining the local order of water molecules. Electronic Supplementary Material: Supplementary material is available for this article at http://dx.doi.org/10.1007/S00214-005-0056-2.     

Modulation of the Sorption Characteristics for an H-bonded porous Architecture by Varying the Chemical Functionalization of the Channel Walls

Five isostructural microporous supramolecular architectures prepared by H-bonded assembly between the hexa-anionic complex [Zr₂(Ox)₇]⁶⁻ (Ox=oxalate, (C₂O₄)²⁻) and tripodal cations (H₃-TripCH₂-R)³⁺ with R=H, CH₃, OH and OBn (Bn=CH₂Ph) are reported. The possibility to obtain the same structure using a mixture of tripodal cations with different R group (R=OH and R=CH₃) has also been successfully explored, providing a unique example of three-component H-bonded porous framework. The resulting SPA-1(R) materials feature 1D pores decorated by R groups, with apparent pore diameters ranging from 3.0 to 8.5 Å. Influence of R groups on the sorption properties of these materials is evidenced through CO₂ and H₂O vapor sorption/desorption experiments, as well as with I₂ capture/release experiments in liquid media. This study is one of the first to demonstrate the possibility of tuning the porosity and exerting precise control over the chemical functionalization of the pores in a given H-bonded structure, without modifying the topology of the reference structure, and thus finely adjusting the sorption characteristics of the material.