Polymerisation et copolymerisation de monophenyl et de diphenylethylenes amorcees par des graphitures de metaux alcalins

The bulk polymerization at -24° of α-methylstyrene initiated by the alkali metals and the graphitides LiC₁₂, KC₂₄ and KC₃₆ has been studied. The tacticities of polymers have been measured by [¹H] NMR. The alkali metals give polymers having the same tacticity and the propagation of the stereoconfiguration is bernouillian; LiC₁₂ yields more racemic diads while KC₂₄ and KC₃₆ yield more meso diads and show a penultimate effect. By measuring the growing of the thickness of KC₂₄ flakes, it appears that the more sterically hindered a monomer the more slowly it penetrates into the graphitide. The copolymerizations at 25° of styrene with 1-1 diphenylethylene or 1–2 diphenylethylene (trans stilbene) (comonomer ratio 1/1) initiated by KC₂₄ in tetrahydrofuran (THF), xylene (XL), decahydronaphthalene (decalin DL) and cyclohexane (CH) have been studied. The amount of styrene units in the copolymers depends on the nature of the solvent: it increases as the interaction solvent-graphitide decreases. All the results support the view that the polymerization proceeds between the graphite layers.     

Polymérisation anionique amorcée par les composés lamellaires du graphite et du lithium

In the present work, we use the binary insertion compound LiC₁₂ to polymerize styrene, methyl methacrylate, butadiene, isoprene, and to copolymerize isoprene and styrene in various hydrocarbon solvents (aromatics and aliphatic) and etheral solvents. We show that the styrene polymerization in aromatic solvents gives better yields than in the etheral solvents, the polymer being atactic. Methyl methacrylate does not polymerize in toluene but does so completely in DME. More generally, the yields of polymerization are better with KC₃₇ than with LiC₁₂ because of the different capacities of the monomer to get into the carbon layers. The polymerization of dienes with LiC₁₂ shows that the microstructures of the polymer obtained in π-or n-donor solvents are similar to the ones obtained by homogenous polymerization with Li cation in such solvents. However, for isoprene in cyclohexane, the results are different. The isoprene styrene copolymers are statistical ones and the mean length of styrene blocks is less than 5. The monomer interaction with the insertion compound and the growing chain geometry between the carbon layers are the facts which control either the stereospecificity of the polymerization or the selectivity of the copolymerization.     

Anionic polymerization of lactones initiated by alkali graphitides. III. Polymerization of δ-valerolactone initiated by KC24

The anionic polymerization of δ-valerolactone initiated by KC₂₄ in xylene or tetrahydrofuran was investigated. The influence of the polymerization conditions on the amount and composition of the oligomers fraction and high polymers formed was tested. Experiments were done with a potassium mirror and benzophenone-potassium as initiators of the polymerization to check the influence of the layered structure of the initiator. It was found that the amount of the oligomers formed under comparable conditions increases in the order KC₂₄ (9%), potassium mirror (22%), benzophenone-potassium (56%). The highest yields of poly(δ-valerolactone) (over 90%) and highest intrinsic viscosities (1.0 dL/g and more) were achieved by the KC₂₄-initiated polymerizations in xylene.     

Anionic polymerization of lactones initiated by alkali graphitides. I. Polymerization of ϵ-caprolactone initiated by KC24

The influence of the reaction conditions (time, temperature, concentrations of the monomer, and the initiator) on the amount and composition of the oligomers and high molecular products formed during the heterogeneous anionic polymerization of ?-caprolactone was investigated. The polymerization was initiated by KC₂₄ in xylene or tetrahydrofuran. Conditions were found under which intra- and intermolecular transesterification was strongly suppressed, thus providing the opportunity for the formation of polyesters with viscometric molecular masses of more than 300,000 and good yields (80% and higher). The total quantity of products with a viscometric molecular mass below 2500 did not exceed 15%; that of the cyclic dimer was not in excess of 5%. Peculiar features of the KC₂₄ initiated polymerization are the insignificant rise in the number of oligomers and the formation of high polymers even in strongly diluted solutions of ?-caprolactone (0.2 mol/L and lower). The quantity and molecular mass of the polymers obtained decreased as the temperature increased. It was also established that the polymerization of the cyclic dimer of ?-caprolactone is not initiated by KC₂₄.     

Anionic polymerization of lactones initiated by alkali graphitides. II. Changes in the KC24 structure during polymerization of lactones

The structural changes in the potassium graphitide KC₂₄ in its interaction with ?-caprolactone, γ-butyrolactone and pivalolactone are examined by profilometric measurement and electron scanning microscopy. The interaction of KC₂₄ with a nonpolymerizable lactone-γ-butyrolactone proceeds without delamination of the graphitide. The polymerization of ?-caprolactone and pivalactone in the interlayer spaces of KC₂₄ leads to destruction of the initiators structure. An increase in the temperature and monomer concentration enhances the delamination of the graphitide.     

Anionic polymerization of lactones initiated by alkali graphitides. IV. Copolymerization of ε-caprolactone initiated by KC24

The copolymerization of ε-caprolactone (ε-CL) with octamethylcyclotetrasiloxane (D₄) and styrene (St) under the action of the second-stage potassium graphitide KC₂₄ was investigated. The copolymerizations were carried out in bulk or in xylene at 20°C. The content of the block copolymer ε-CL/D₄ in the polymerization mixture was 60–95%, the molecular weight ranging between 150,000 and 300,000. The data for the copolymers' composition obtained by ¹H-NMR and GPC showed 14–20% of D₄-units in the copolymer. The amount of the block copolymer ε-CL/St in the polymerization products was 0–87%, and the molecular weights in the case of copolymer formation were between 100,000 and 500,000. The content of St-units in the copolymers was from 10 to 75% as shown by GPC and ¹H-NMR. The mechanism of action of the initiator is discussed.     

NaHSO_3-O_2-MnSO_4体系引发丙烯酰胺水溶液聚合反应的研究

本文研究了NaHSO_3-O_2-MnSO_4体系引发丙烯酰胺(AM)水溶液聚合的动力学,并探讨了其引发机理。用该体系可在室温下迅速引发AM聚合,且所得的聚丙烯酰胺(PAM)分子量可达1000万。为了比较,对NaHSO_3-O_2等几个引发体系也作了一定研究。     

Passivating Lithiated Graphite via Targeted Repair of SEI to Inhibit Exothermic Reactions in Early-Stage of Thermal Runaway for Safer Lithium-Ion Batteries

The self-exothermic in early stage of thermal runaway (TR) is blasting-fuse for Li-ion battery safety issues. The exothermic reaction between lithiated graphite (LiC_x) and electrolyte accounts for onset of this behavior. However, preventing the deleterious reaction still encounters hurdles. Here, we manage to inhibit this reaction by passivating LiC_x in real time via targeted repair of SEI. It is shown that 1,3,5-trimethyl-1,3,5-tris(3,3,3-trifluoropropyl)cyclotrisiloxane (D₃F) can be triggered by LiC_x to undergo ring-opening polymerization at elevated temperature, so as to targeted repair of fractured SEI. Due to the high thermal stability of polymerized D₃F, exothermic reaction between LiC_x and electrolyte is inhibited. As a result, the self-exothermic and TR trigger temperatures of pouch cell are increased from 159.6 and 194.2 °C to 300.5 and 329.7 °C. This work opens up a new avenue for designing functional additives to block initial exothermal reaction and inhibit TR in early stage.     

On the thermal stability of alkali metal alkanoates II

Lithiumn-alkanoats from pentanoate (LiC₅) to dodecanoate (LiC₁₂) have been investigated with regard to their thermal stabilities. None of these salts are stable in the molten state when oxygen is present, but in an inert atmosphere the melt appears to be stable over a quite large temperature interval, on the average from the melting point (T _F to about 1.3T _F).     

Crown Ether As The Phase-Transfer Catalyst for Free Radical Polymerization of Hydrophobic Vinyl Monomers

Various crown ethers were used as phase-transfer catalysts for free radical polymerizations of some water-insoluble vinyl monomers such as acrylonitrile, methylmethacrylate and styrene with persulfate as initiator. The catalytic abilities of these crown ethers for free radical polymerization of acrylonitrile with S₂O₈^2?ion as an initiator were in the order: 18-crown-6 > 15-crown-4 > 12-crown-4 > benzo-15-crown-5 > dibenzo-18-crown-6. Among various persulfates such as Na₂S₂O₈ K₂S₂O₈ and (NH₄)₂S₂O₈, ammonium persulfate was the optimum initiator for the polymerization of acrylonitrile catalyzed by 18-crown-6 or 15-crown-5. Among the organic solvents used, chloroform seems to be the best solvent for the catalytic polymerization of acrylonitrile. An apparent activation energy of 72.9 kJ mol^?1 was observed for the polymerization of acrylonitrile. The catalytic reaction rates of free radical polymerization for these hydrophobic vinyl monomers were in the order: acrylonitrile > methylmethacrylate > styrene > isoprene. Effects of concentrations of crown ether, initiator, and nitrogen on the polymerization of these vinyl monomers were investigated.     

Acidic Peroxo Salts: A New Class of Initiators for Vinyl Polymerization. IV. Kinetics of Polymerization of Methyl Methacrylate Initiated by Potassium Monopersulfate Catalyzed by Ag(l)

Abstract

Kinetics of vinyl polymerization of methyl methacrylate (MMA) initiated by an acidic peroxo salt, such as potassium monopersulfate coupled with silver nitrate, have been investigated in aqueous medium over the temperature range from 35 to 50°C. The rates of polymerization (R_p) have been computed for various concentrations of the monomer and initiator. The effectiveness of various metal salts in catalyzing the polymerization reaction has been determined from the observed R_p values. The effects of the catalyst (AgNO₃), initiator, monomer, and various secondary aliphatic and aromatic amines on R_p and percentage conversion have been studied. The endgroups of the resultant polymers have been studied using standard methods. From the observed endgroups and kinetic results, a reaction scheme has been proposed involving initiation by ′OH or SO₄ ^? radicals, generated by the interaction of the initiator with silver nitrate and termination by mutual combination.     

Acidic peroxo salts: A new class of initiators for vinyl polymerization—II: Kinetics of polymerization of acrylonitrile initiated by potassium monopersulphate catalysed by Mn(II)

Kinetics of the polymerization of acrylonitrile initiated by an acidic peroxo salt (potassium monopersulphate) catalysed by Mn(II) have been investigated in aqueous systems over the range 30–50°. The rates of polymerization (R_p) have been studied for various concentrations of monomer and initiator. The efficiencies of various metal salts in catalysing the polymerization have been determined from the values of R_p. The effects of catalyst (MnSO₄), initiator, monomer and various aromatic and heterocyclic amines on R_p and conversion have been studied. The end-groups of the recovered polymers have been studied using standard methods. From the observed end-groups and kinetic results, a reaction scheme has been proposed, involving initiation by OH^. or S$\text{O}$₄^. radicals, generated by the interaction of the initiator with manganous sulphate, and termination by mutual combination.     

Acidic peroxo salts: A new class of initiators for vinyl polymerization. III. Kinetics of polymerization of methyl methacrylate initiated by potassium monopersulfate catalyzed by Co(II)

Kinetics of the polymerization of methyl methacrylate by an acidic peroxo salt like potassium monopersulfate catalyzed by Co(II) have been investigated in aqueous medium, over the range of 35–50°C. The rates of polymerization (R_p) have been studied at various concentrations of monomer and initiator. The efficiencies of various metal salts in catalyzing the polymerization have been evaluated from the observed value of R_p. The effects of catalyst (CoSO₄), initiator, monomer, and various concentrations of FeCl₃ on R_p and percentage conversion have been studied. The end groups of the recovered polymers have been studied using standard methods. From the observed end groups and kinetic results, a reaction scheme has been proposed involving initiation by S O₄· or OH· radicals, generated by the interaction of the initiator with cobalt sulfate and termination of the polymer chains by mutual combination.     

The use of ylide (4-picolinium 4-chloro phenacyl methylide) as an initiator for the polymerization of methyl methacrylate

The thermal polymerization of methyl methacrylate [MMA] was carried out using ylide (4-picolinium 4-chloro phenacyl methylide) as an initiator. The rate of polymerization (R_p) increases with increasing monomer and initiator concentrations; The exponent value has been computed to be 1 ± 0.02 and 0.5, respectively. The reaction was carried out at four different temperatures and the overall activation energy has been computed to be 16.01 kcal/mol. The polymerization was inhibited in the presence of hydroquinone as a radical scavanger. Kinetic studies indicates that the overall polymerization takes place by a radical mechanism.     

Solution polymerization of methyl methacrylate using trioctylmethylammonium persulfate initiator: Kinetics of polymerization and activation parameters for the primary decomposition of the initiator

The kinetics of solution polymerization of methyl methacrylate using trioctylmethylammonium persulfate (aliquat persulfate) at 60°C has been studied in t-butyl alcohol, N,N-dimethyl formamide, acetonitrile, dioxane, acetone, and methyl ethyl ketone. The rate of polymerization depends markedly on the solvent used. The initiator exponent is close to 0.5 in the first three solvents but larger than this value in the other three solvents. The overall activation energy of the polymerization has been determined in all the solvents. The rate constants and activation parameters for the primary decomposition of the initiator have been determined in the first three solvents where ideal polymerization conditions prevail. The activation parameters for the decomposition of AQ₂S₂O₈ in the organic solvents depend on the type of solvent. They are very different from those of the free S₂O^2?₈ ion in water. These differences have been explained taking into consideration the various ionic forms in which the initiator exists in the studied solvents using a previously postulated model of the activated state.     

Macrocyclic Polyether Phase Transfer Catalysts for Free Radical Polymerization of Acrolein

Macrocyclic polyethers, e.g., crown ethers and cryptands, were prepared and employed as phase transfer catalysts for free radical polymerization of acrolein, a vinyl monomer, with persulfates (S₂O₈^2–) as initiators. The catalytic abilities of various macrocyclic polyethers as catalysts for the free radical polymerization of acrolein were found to be in the order: benzo‐15‐crown‐5 > dibenzo‐18‐crown‐6 > 12‐crown‐4 > 15‐crown‐5 > 18‐crown‐6 > cryptand‐22 with sodium persulfate (Na₂S₂O₈) as initiator. Sodium persulfate proved to be a better initiator than ammonium persulfate or potassium persulfate with benzo‐15‐crown‐5 as a catalyst. Effects of solvents and temperature on the catalytic polymerization were also investigated. The polymerization rates in various solvents were in the order: dioxane > benzene > acetonitrile > acetone > dichloromethane > hexane > water. Comparison between bulk polymerization and solution polymerization was also made. Higher polymerization rate was observed at higher temperature. The molecular weights of polyacrolein and the conversion of monomer in reaction period were determined with gel permeation chromatography and ultra‐violet spectrophotometry, respectively. Concentration effects of crown ether and initiator were also investigated and discussed.     

Effect of reaction medium on copolymerization of acrylonitrile and methyl acrylate

The copolymerization of acrylonitrile (AN) with methyl acrylate (MEA) has been investigated in three types of polymerization, i.e., emulsion polymerization in water with a water-soluble initiator, suspension polymerization in water with an oil-soluble and water-insoluble initiator, and solution polymerization in dimethyl sulfoxide (DMSO). Monomer reactivity ratios at 50°C. for AN and MEA are found to be r₁ = 0.78 ± 0.02, r₂ = 1.04 ± 0.02 in emulsion polymerization; r₁ = 1.02 ± 0.02, r₂ = 0.70 ± 0.02 in DMSO solution polymerization; r₁ = 0.75 ± 0.05, r₂ = 1.54 ± 0.05 in suspension polymerization. The large differences found in the reactivity ratios may be attributed to the different ratio of concentration of two monomers in the loci of polymerization. Chemically, AN is somewhat more reactive than MEA as shown by the reactivity ratios in DMSO. In the case of the suspension polymerization, the MEA/AN ratio in the polymer particles in which polymerization occurs may be higher than that in the total phase. Experimental results of the emulsion polymerization show that the emulsion polymerization of AN occurs both in the particles and in water. In addition, rates of the copolymerization of AN with MEA have also been investigated.     

Cinetique de polymerisation du styrene en presence de peroxyde de benzoyle p,p′ bis-bromomethyle synthese de polymeres peroxydes

The free radical polymerization of styrene has been studied by using p,p′-bisbromomethyl benzoyl peroxide as initiator containing a chain transfer group. The rate constant of decomposition (k_d) of this peroxide has been determined at various temperatures, as well as the efficiency factor f and the transfer constant to initiator C₁. At 60°, f = 0·70 ± 0·05 and C₁ = 0·5. Polystyrene containing peroxide groups has been prepared by using this initiator. The highest yield in polymeric peroxide has been obtained for polymerization in emulsion at 40°.     

Alkylidenic polymerization of alkynes from w-based initiators: Kinetics and mechanism of activation by lewis acids

The polymerization of alkynes initiated by metathesis catalysts proceeds via a mechanism similar to that of the ring-opening metathesis polymerization of cycloalkenes. Various polymerizing systems have been claimed by several authors as bringing about living character; they point out the strong influence of the substituents carried by the monomer which have been shown to hinder transfer and termination processes. Whatever the initiator used, the activity of the polymerizing system is low; this paper deals with the activation of Rudler type initiator by Lewis acids. The effect of AlR₃, AlR₂Cl, AlRCl₂, BR₃ and B(OR)₃ is presented and discussed.     

Acidic peroxo salts. A new class of initiators for vinyl polymerization. I. Kinetics of polymerization of acrylonitrile initiated by potassium monopersulfate catalyzed by Ag(I)

The kinetics of polymerization of acrylonitrile initiated by KHSO₅ and catalyzed by Ag(I) have been investigated in an aqueous medium over the temperature range of 35–50°C. The rates of polymerization R_p have been calculated and studied with respect to monomer and initiator. The catalytic activity of various metal ions on the initiator has been determined from a comparison of R_p values. The effects of monomer, catalyst, neutral salts, various amines, and inhibitor (hydroquinone) on the initial rate as well as maximum conversion have been studied. From the kinetics results a suitable reaction scheme has been proposed.