Combined adsorption of ammonia and oxygen on the surface of solid solutions of CdxHg1 ? xTe

The adsorption of ammonia, oxygen, and the NH₃ + O₂ mixture on solid solutions Cd _x Hg_{1 − x} Te is studied. The low adsorbability of the mixture, as compared to that of the individual components, is established. Conclusions are drawn as to the nature of its active centers. Schemes for the combined adsorption of ammonia and oxygen are proposed. The temperature areas of tentatively highest catalytic activity of CdTe and CdHgTe in the reaction of ammonia oxidation are established. The formation of gaseous nitrogen in the final products is demonstrated. The degree of ammonia’s transformation into nitrogen is 97–99%. It increased with a rise in temperature and did not depend on the initial ammonia concentration.     

Acid-base properties of the surfaces of CdxHg1–xTe solid solutions

The acid-base properties of actual CdTe and CdHgTe surfaces were investigated by means of non-aqueous conductometric titration for pHpzc determination, mechanochemistry, and UV spectroscopy. It was shown that the alkaline nature of their surface was due to the dissociative adsorption of atmospheric water flowing on the coordination-saturated surface atoms of cadmium with vacancy defects. The adsorbed water was involved in the formation of tellurium oxide TeO₂ and H₂TeO₃ tellurous acid in the dispersion of CdTe and CdHgTe.     

Formation of active phases of Fe/C,Cr/C and Fe–Cr/C catalysts in oxidative dehydrogenation of ethane

The oxidative dehydrogenation of ethane into ethylene using CO₂ as an oxidant at temperatures of 650–750 °C was carried out over Fe/C, Cr/C and Fe–Cr/C catalysts deposited on a carbon support. Before and after the reaction the catalysts were investigated by X-ray powder diffraction (XRD), in situ magnetometry and transmission electron microscopy methods. The correlation between activity of Fe/C, Cr/C and Fe–Cr/C catalytic systems and their phase composition was established.     

An unexpected one-pot synthesis of multi-substituted quinolines via a cascade reaction of Michael/Staudinger/aza-Wittig/aromatization of ortho-azido-β-nitro-styrenes with various carbonyl compounds

Multi-substituted quinolines 3 were unexpectedly prepared from a cascade reaction of ortho-azido-β-nitro-styrenes with various carbonyl compounds. This method takes advantages of mild condition, simple work-up, high yield as well as wide substrate scope, which makes this method powerful for one-pot synthesis of multi-substituted quinolines.     

Quantum-chemical study of chlorophosphoranes: II. Structure of molecules of (Cl2)aP(ClnX3?n)e series, and mutual influence of axial and equatorial substituents

The quantum-chemical calculations of the (C₆H₅)₂PCl₃ molecule were performed by the methods RHF/6-31G(d) and MP2/6-31G(d) with complete and partial optimization of its geometry. The results of calculations were used for evaluating the NQR frequencies of ³⁵Cl and the parameters of asymmetry of the of electric field gradient on the ³⁵Cl nuclei of this molecule. According to the results of calculations with the partial optimization of geometry and to the experimental data of ³⁵Cl NQR the bond lengths were found of central atom P in the solid state of this compound. The mutual influence of its axial and equatorial bonds was studied. It is shown that in chlorophosphoranes the ³⁵Cl NQR frequencies of the axial and equatorial chlorine atoms decrease with the decrease in the bond lengths of phosphorus atom.     

Effect of electron radiation on electrical parameters of Zn/n-Si/Au–Sb and Zn/ZnO/n-Si/Au–Sb diodes

In this study, RF-magnetron sputtered ZnO thin film as an interlayer was used to improve radiation tolerance of the Schottky diodes. The structural and optical measurements showed that the ZnO thin films have hexagonal crystal structure with preferential c-axis orientation, 20.39 nm grain sizes and 3.15 eV bandgap. The electrical parameters such as ideality factor, barrier height and series resistance of Zn/n-Si/Au–Sb and Zn/ZnO/n-Si/Au–Sb diodes were calculated before and after electron radiation at 25, 50 and 75 gray doses. Deviation values of the parameters showed that the ZnO as an interlayer caused to improved radiation tolerance of the diodes.

     

The enthalpies of formation of Sm1 + xBa2 ? xCu3Oy substitution solid solutions

The enthalpies of reactions of Sm_{1 + x} Ba_{2 − x} Cu₃O _y substitution solid solutions (x = 0, 0.1, 0.2, 0.3, 0.7, and 0.8) with 1.07 N HCl were measured at 298.15 K in a hermetic isothermic-shell swinging calorimeter. The results and the literature data were used to calculate the standard enthalpies of their formation from simple substances and binary oxides (Δ_f H _298.15^o and Δ_ox H _298.15^o). The dependence of the enthalpy of formation on the degree of samarium substitution for barium was obtained.     

The enthalpies of formation of substitution solid solutions Pr1 + xBa2 ?xCu3Oy

The enthalpies of reactions of substitution solid solutions Pr_{1 + x} Ba_{2 − x}Cu₃O _y , where x = 0, 0.2, 0.4, 0.6, and 0.9, with 1.07 N HCl were measured at 298.15 K in a hermetic swinging isothermic-shell calorimeter. The results and the literature data were used to calculate the standard enthalpies of formation of solid solutions from the elements and oxides. The dependence of the enthalpy of solid solution formation on the degree of praseodymium substitution for barium (x) was revealed.     

The conditions of formation and physicochemical properties of Nd1 ? xBaxMn1 ? yFeyO3 phases

The homogeneity regions of Nd_{1 − x} Ba _x MnO₃ (0.0 ≤ x ≤ 0.25) and NdMn_{1 − y} Fe _y O₃ (0.0 ≤ y ≤ 1.0) orthorhombic solid solutions in air at 1373 K were determined. The region of the existence of Nd_{1 − x} Ba _x Mn_{1 − y} Fe _y O₃ orthorhombic solid solutions in air at 1373 K was studied. A fragment of the phase diagram of the NdMnO₃-BaMnO₃-BaFeO_2.5-NdFeO₃ quasi-quaternary complex oxide system in air at 1373 K was suggested. The mechanothermal properties of Nd_0.75Ba_0.25MnO₃, Nd_0.8Ba_0.2Mn_0.9Fe_0.1O₃, Nd_0.8Ba_0.2Mn_0.7Fe_0.3O₃, and Nd_0.8Ba_0.2Mn_0.5Fe_0.5O₃ doped neodymium manganates were studied.     

Study of the mechanism of base induced dehydrobromination of trans-β-bromostyrene

Observation that rates of dehydrobromination of trans-β-bromostyrene (1) and the Hofmann degradation of tetrabutyl ammonium cation depend on strength of base in different ways and that treatment of 1 with base results in fast abstraction of the β-proton imply the possibility that the dehydrobromination of 1 could proceed via α-elimination and Ph migration. In order to clarify this question, β-¹³C-labeled 1 was obtained and subjected to PTC dehydrobromination which proceeds without migration of Ph. The obtained results are consistent with an irreversible E1cB mechanism.     

Metathesis transformations of unsaturated derivatives of β-diketones

Selected β-diketones bearing unsaturated derivatives have been demonstrated to undergo homo-metathesis and cross-metathesis with selected olefins in the presence of Grubbs catalysts. The reactions led to respective homo- and cross-metathesis products mainly with good yields and selectivities.      

Synthesis of 2-(N-arylimino-κN-methyl)pyrrolide-κN complexes of nickel

2-(N-aryliminomethyl)pyrrole precursors (2,6-R₂-C₆H₃-NCH-2-C₄H₃NH) (R = Me, IH; R = ⁱPr, IIH) were prepared and transformed into their corresponding sodium salts (Na⁺I⁻ and Na⁺II⁻) by treatment with NaH. Both salts readily react with [NiBr₂(DME)] (DME = 1,2-dimethoxyethane) to give the respective bis{2-(N-arylimino-κN-methyl)pyrrolide-κN}nickel(II) complexes (1, 2) in almost quantitative yields. The oxidative addition of IH to [Ni(COD)₂] (COD = 1,5-cyclooctadiene) results in the formation of 3, which is a mono(iminomethylpyrrolide)-η³-(cyclic-allyl)-type organonickel(II) complex. The crystal structure of compound 1 has been established by X-ray diffraction studies.     

Synthesis of Exfoliated MEH-PPV/Clay Nanocomposites

The synthesis of poly（2-methoxy-5-（2＇-ethyl-hexyloxy）-l,4-phenylenevinylene） （MEH-PPV） in the presence of organophilic montmorillonite （OMMT） was reported and the exfoliated MEH-PPV/OMMT nanocomposites was obtained by controlling the ratio of the monomer to the OMMT.     

Mechanism and kinetics of the production of hydroxymethyl hydroperoxide in ethene/ozone/water gas-phase system

The mechanism and kinetics of the production of hydroxymethyl hydroperoxide (HMHP) in ethene/ ozone/water gas-phase system were investigated at room temperature (298±2 K) and atmospheric pressure (1×105 Pa). The reactants were monitored in situ by long path FTIR spectroscopy. Peroxides were measured by an HPLC post-column fluorescence technique after sampling with a cold trap. The rate constants (k3) of reaction CH2O2 H2O→HMHP (R3) determined by fitting model calculations to ex-perimental data range from (1.6―6.0)×10?17 cm3·molecule?1·s?1. Moreover, a theoretical study of reac-tion (R3) was performed using density functional theory at QCISD(T)/6-311 (2d,2p)//B3LYP/6-311 G(2d, 2p) level of theory. Based on the calculation of the reaction potential energy surface and intrinsic reac-tion coordinates, the classic transitional state theory (TST) derived k3 (kTST), canonical variational tran-sition state theory (CVT) derived k3 (kCVT), and the corrected kCVT with small-curvature tunneling (kCVT/SCT) were calculated using Polyrate Version 8.02 program to be 2.47×10-17, 2.47×10-17 and 5.22×10-17 cm3·molecule-1·s-1, respectively, generally in agreement with those fitted by the model.     

CuI/Proline-catalyzed N-Arylation of Nitrogen Heterocycles

Qing Xiang GUON-Arylated heterocycles such as pyrroles, indoles, and imidazoles are important building blocks for the synthesis of natural products, pharmaceuticals, and function materials1. Usually these compounds were synthesized by Cu-catalyzed Ullmann…     

Determination of diffusion coefficient of lithium in LiMyMn2 ? yO4 spinels using potentiostatic intermittent titration technique

The potentiostatic intermittent titration technique is used to study lithium transport in the LiM _yMn_{2 − y} O₄ compounds with a spinel structure intended for application as cathodic materials in lithiumion and lithium-polymer batteries. The materials are synthesized using the sol-gel method and the melt-impregnation method. Kinetic and diffusion characteristics of the Li _x Mn₂O₄ and Li _x Mn_1.95Cr_0.05O₄ compounds are determined at 25°C as dependent on lithium content 0 < x < 1. The diffusion coefficient of lithium varies significantly in the range of 10⁻¹⁰ to 10⁻¹³ cm²/s under variation of the electrode composition; the surface resistance depends weakly on the concentration of lithium and is 200–500 Ohm cm².     

Conversion of alkylmercaptans in the presence of γ-Al2O3

In the presence of -Al₂O₃ at 200–500°C methylmercaptans quantitatively transform into dimethyl sulfides with almost equilibrium degrees of conversion. 100% selectivity towards diethyl sulfide is observed when ethylmercaptan conversion amounts to about 50% of its equilibrium value. In more severe conditions, dimethyl- and diethyl sulfides convert with eliminating hydrocarbons and H₂S. Selectivity towards diisopropylsulfide is as high as 30% with isopropylmercaptane conversion up to 25%; the reaction follows a parallel-consecutive scheme.

---

-Al₂O₃ 200–500°C . 100% 50% . - H₂S. 30% 25%, - .

     

Determination of diffusion coefficient of lithium in LiMyMn2 ? yO4 spinels using galvanostatic intermittent titration technique

The galvanostatic intermittent titration technique is used to study lithium transport in the LiM _y Mn_{2 − y} O₄ compounds with a spinel structure intended for application as cathodic materials in lithium-ion and lithium-polymer batteries. Equilibrium intercalation isotherms of the Li _x Mn₂O₄ and Li _x Mn_1.95Cr_0.05O₄ compounds and also their diffusion characteristics are determined at 25°C as dependent on lithium content x, 0 < x < 1. The diffusion coefficient of lithium varies in a complex way in the range of 10⁻¹⁰ to 10⁻¹² cm²/s under variation of the electrode composition.     

Enthalpies of solution and standard enthalpy of formation of crystalline NaVO3 · 2H2O

The enthalpies of solution of sodium metavanadate dihydrate in aqueous solutions of sodium perchlorate at ionic strength I = 0.3, 0.5, and 1.0 mol/L were calorimetrically measured at 298.15 K. The resulting experimental data were used to calculate the standard enthalpy of formation of crystalline NaVO₃ · 2H₂O.