Phase behavior and 3D structure of strongly attractive microsphere-nanoparticle mixtures

We investigate the phase behavior and 3D structure of strongly attractive mixtures of silica microspheres and polystyrene nanoparticles. These binary mixtures are electrostatically tuned to promote a repulsion between like-charged (microsphere-microsphere and nanoparticle-nanoparticle) species and a strong attraction between oppositely charged (microsphere-nanoparticle) species. Using confocal fluorescence scanning microscopy, we directly observe the 3D structure of colloidal phases assembled from these mixtures as a function of varying composition. In the absence of nanoparticle additions, the charged-stabilized microspheres assemble into a polycrystalline array upon sedimentation. With increasing nanoparticle volume fraction, nanoparticle bridges form between microspheres, inducing their flocculation. At even higher nanoparticle volume fractions, the microspheres become well coated with nanoparticles, leading to their charge reversal and subsequent restabilization. We demonstrate how this fluid-gel-fluid transition can be utilized to control the morphology of the colloidal phases formed under gravity-driven sedimentation.     

Interparticle interactions and direct imaging of colloidal phases assembled from microsphere-nanoparticle mixtures

We investigate the interparticle interactions, phase behavior, and structure of microsphere-nanoparticle mixtures that possess high size and charge asymmetry. We employ a novel Monte Carlo simulation scheme to calculate the effective microsphere interactions in suspension, yielding new insight into the origin of the experimentally observed behavior. The initial settling velocity, final sediment density, and three-dimensional structure of colloidal phases assembled from these binary mixtures via gravitational settling of silica microspheres in water and index-matched solutions exhibit a strong compositional dependence. Confocal laser scanning microscopy is used to directly image and quantify their structural evolution during assembly. Below a lower critical nanoparticle volume fraction (phi(nano) < phi(L,C)), the intrinsic van der Waals attraction between microspheres leads to the formation of colloidal gels. These gels exhibit enhanced consolidation as phi(nano) approaches phi(L,C). When phi(nano) exceeds phi(L,C), an effective repulsion arises between microspheres due to the formation of a dynamic nanoparticle halo around the colloids. From this stable fluid phase, the microspheres settle into a crystalline array. Finally, above an upper critical nanoparticle volume fraction (phi(nano) > phi(U,C)), colloidal gels form whose structure becomes more open with increasing nanoparticle concentration due to the emergence of an effective microsphere attraction, whose magnitude exhibits a superlinear dependence on phi(nano).     

Interaction forces between colloidal particles in a solution of like-charged, adsorbing nanoparticles

We have measured the force between a weakly charged micron-sized colloidal particle and flat substrate in the presence of highly charged nanoparticles of the same sign under solution conditions such that the nanoparticles physically adsorb to the colloidal particle and substrate. The objective was to investigate the net effect on the force profile between the microparticle and flat substrate arising from both nanoparticle adsorption and nanoparticles in solution. The experiments used colloidal probe atomic force microscopy (CP-AFM) to measure the force profile between a relatively large (5 μm) colloidal probe glass particle and a planar glass substrate in aqueous solutions at varying concentrations of spherical nanoparticles. At very low nanoparticle concentrations, the primary effect was an increase in the electrostatic repulsion between the surfaces due to adsorption of the more highly charged nanoparticles. As the nanoparticle concentration is increased, a depletion attraction formed, followed by longer-range structural forces at the highest nanoparticle concentrations studied. These results suggest that, depending on their concentration, such nanoparticles can either stabilize a dispersion of weakly-charged colloidal particles or induce flocculation. This behavior is qualitatively different from that in nonadsorbing systems, where the initial effect is the development of an attractive depletion force.     

Electrostatically tuned interactions in silica microsphere-polystyrene nanoparticle mixtures

We explore the generality of nanoparticle haloing as a novel colloidal stabilization mechanism in binary mixtures of silica microspheres and polystyrene nanoparticles. By selectively tuning their electrostatic interactions, both the initial microsphere stability and the role of nanoparticle additions are varied. Adsorption isotherm and zeta potential measurements indicate that highly charged nanoparticles exhibit a weak (haloing) association with negligibly charged microspheres, whereas they either strongly adsorb onto oppositely charged or are repelled by like-charged microsphere surfaces, respectively. Bulk sedimentation and confocal scanning fluorescence microscopy reveal that important differences in system stability emerge depending on whether the added nanoparticles serve as haloing, bridging, or depletant species.     

DNA-mediated phase behavior of microsphere suspensions

We have constructed a phase diagram for DNA-modified microsphere suspensions based on experimental and theoretical studies. The system is comprised of 1 microm red fluorescent colloids functionalized with strands of an identical oligonucleotide sequence and 1 microm green fluorescent colloids functionalized with the complementary sequence. Keeping the suspension composition and temperature fixed, the phase behavior of colloidal mixtures was studied as a function of salt and oligonucleotide concentration. We observed a colloidal fluid phase of dispersed, single particles at low salt concentrations and low DNA densities. We attribute this colloidal fluid phase to unfavorable hybridization conditions. With increasing salt or hybridizing oligonucleotide concentrations, we observed phase transitions of fluid --> fluid + aggregates --> aggregates due to an increase in duplex affinity, duplex number, or both. Computational analysis assigns a 4 kBT attraction between pairs of complementary microspheres at the destabilizing fluid --> fluid + aggregates transition.     

Simulation of interaction forces between nanoparticles in the presence of Lennard-Jones polymers: freely adsorbing homopolymer modifiers

The force between two nanoscale colloidal particles dispersed in a solution of freely adsorbing Lennard-Jones homopolymer modifiers is calculated using the expanded grand canonical Monte Carlo simulation method. We investigate the effect of polymer chain length (N), nanoparticle diameter (sigma(c)), and colloid-polymer interaction energy (epsilon(cp)) on polymer adsorption (Gamma) and polymer-induced forces (F(P)(r)) between nanoparticles in the full thermodynamic equilibrium condition. There is a strong correlation between polymer adsorption and the polymer-mediated nanoparticle forces. When the polymer adsorption is weak, as in the case of smaller diameters and short polymer chain lengths (sigma(c) = 5, N = 10), the polymers do not have any significant effect on the bare nanoparticle interactions. The adsorbed amount increases with increasing particle diameter, polymer chain length, and colloid-polymer interaction energy. In general, for strong polymer-particle adsorption the polymer-governed force profiles between nanoparticles show short-range repulsion and long-ranged attraction, suggesting that homopolymers would not be ideal for achieving stabilization in nanoparticle dispersions. The attraction is likely due to bridging, as well as polymer segment-segment interactions. The location and magnitude of attractive minimum in the force profile can be controlled by varying N and epsilon(cp). The results show partial agreement and some marked differences with previous theoretical and experimental studies of forces in the limit of flat walls in an adsorbing polymer solution. The difference could be attributed to incorporation of long-ranged colloid-polymer potential in our simulations and the influence of the curvature of the nanoparticles.     

Purification and stabilization of colloidal ZnO nanoparticles in methanol

Purification and stabilization of colloidal ZnO nanoparticles synthesized from zinc acetate dihydrate and potassium hydroxide in methanol have been performed. Isopropanol and hexane were utilized to achieve the precipitation-redispersion washing procedure in methanol. The results from atomic absorption spectroscopy show that the concentration of K⁺ cation can be dramatically reduced by washing. X-ray diffraction and transmission electron microscopy results show that zinc layered double hydroxide formed in the ZnO precipitate can be effectively removed through concentrating the unpurified ZnO colloids by solvent evaporation. The purified ZnO nanoparticles can be fully redispersed in methanol, but become unstable with time due to the low concentration of acetate in the colloids. Fortunately, the unstable ZnO methanol colloids are found to become stable after addition of a small amount of hexane. The present study is of particular significance for the preparation of purified colloidal ZnO nanoparticles for device fabrication, functional ZnO coatings and polymer nanocomposite applications.     

Size ratio effects on interparticle interactions and phase behavior of microsphere-nanoparticle mixtures

We investigate the interparticle interactions and phase behavior of microsphere-nanoparticle mixtures of high charge asymmetry and varying size ratio. In the absence of nanoparticles, negligibly charged microspheres flocculate as a result of van der Waals interactions. Upon addition of a lower critical nanoparticle volume fraction, the microspheres are stabilized by the formation of nanoparticle halos around each microsphere. , A weak attraction between the two species leads to a pronounced enhancement of the effective nanoparticle concentration near the microsphere surface relative to the bulk solution. Above an upper critical nanoparticle volume fraction, the microspheres undergo reentrant gelation. Binary mixtures, in which the effective nanoparticle size is reduced at a fixed microsphere diameter, exhibit a narrow window of stability that ultimately disappears with increasing ionic strength. By contrast, binary mixtures of varying microsphere diameter are stabilized at similar nanoparticle volume fractions and exhibit a broader window of stability with decreasing size ratio. This unexpected observation may arise from the reduced attraction between smaller microspheres because negligible differences in nanoparticle halo formation are observed in these mixtures.     

Reentrant phase behavior of nanoparticle solutions probed by small-angle scattering

The nanoparticles in solution represent a model system, where the well-established colloidal theories such as the Debye–Hückel theory and/or Derjaguin–Landau–Verwey–Overbeek theory can be implemented to predict the nanoparticle phase behavior. Recently, reentrant phase transitions in a wide range of colloids (e.g., inorganic and organic nanoparticles, polymers, and biomolecules) have been observed, which are not consistent with these theories. The colloids in the reentrant phase behavior undergo a phase change and return back to the original phase with respect to a specific physiochemical parameter (e.g., ionic strength, concentration of different additives, temperature, and so on). The nanoparticle–polymer/multivalent ion systems, demonstrating such phase transition and the corresponding phase behavior in terms of interparticle interactions, have been probed by small-angle scattering. It has been shown how the tuning in interparticle interactions using external parameters can lead to reentrant phase behavior and use the nanoparticle aggregation for building nanohybrids. The deviations of the present observations from those of the standard colloidal theories and the anticipated challenges are also discussed.     

Haloing, flocculation, and bridging in colloid-nanoparticle suspensions

Integral equation theory with a hybrid closure approximation is employed to study the equilibrium structure of highly size asymmetric mixtures of spherical colloids and nanoparticles. Nonequilibrium contact aggregation and bridging gel formation is also qualitatively discussed. The effect of size asymmetry, nanoparticle volume fraction and charge, and the spatial range, strength, and functional form of colloid-nanoparticle and colloid-colloid attractions in determining the potential-of-mean force (PMF) between the large spheres is systematically explored. For hard, neutral particles with weak colloid-nanoparticle attraction qualitatively distinct forms of the PMF are predicted: (i) a contact depletion attraction, (ii) a repulsive form associated with thermodynamically stable "nanoparticle haloing," and (iii) repulsive at contact but with a strong and tight bridging minimum. As the interfacial cohesion strengthens and becomes shorter range the PMF acquires a deep and tight bridging minimum. At sufficiently high nanoparticle volume fractions, a repulsive barrier then emerges which can provide kinetic stabilization. The charging of nanoparticles can greatly reduce the volume fractions where significant changes of the PMF occur. For direct and interfacial van der Waals attractions, the large qualitative consequences of changing the absolute magnitude of nanoparticle and colloid diameters at fixed size asymmetry ratio are also studied. The theoretical results are compared with recent experimental and simulation studies. Calculations of the real and Fourier space mixture structure at nonzero colloid volume fractions reveal complex spatial reorganization of the nanoparticles due to many body correlations.     

Preparation of nanoparticle colloids of methoxy poly(ethylene glycol)-<Emphasis Type="Italic">b</Emphasis>-poly(<Emphasis Type="SmallCaps">D</Emphasis>,<Emphasis Type="SmallCaps">L</Emphasis>-lactide): effects of surfactant and organic solvent

Nanoparticle colloids of methoxy poly(ethylene glycol)-b-poly(D,L-lactide) (MPEG-b-PDLL) diblock copolymer were prepared by a modified spontaneous emulsification solvent diffusion method using acetone/ethanol as the mixture organic solvents. The MPEG-b-PDLL was synthesized by ring-opening polymerization of D,L-lactide using stannous octoate and MPEG with molecular weight of 5,000 g/mol as the initiating system. The MPEG-b-PDLL obtained was an amorphous polymer with molecular weight of 73,600 g/mol. Influences of acetone/ethanol (v/v) ratios and Tween 80 surfactant concentrations on characteristics of the colloidal nanoparticles were investigated and discussed. Light-scattering analysis showed that average diameters of the surfactant-free colloidal nanoparticles were in the range of 86–124 nm. The nanoparticle sizes decreased as the ethanol ratio increased. The Tween 80 did not show the significant effect on the nanoparticle sizes. Scanning electron micrographs of dried nanoparticles that demonstrated the aggregation of most particles suggested they were the soft nanoparticles. However, the dried nanoparticle morphology can be observed from scanning electron microscopy as having a spherical shape and smooth surfaces.     

Microstructure and depletion forces in polymer-colloid mixtures from an interfacial statistical associating fluid theory

By using a classical density functional theory (interfacial statistical associating fluid theory), we investigate the structure and effective forces in nonadsorbing polymer-colloid mixtures. The theory is tested under a wide range of conditions and performs very well in comparison to simulation data. A comprehensive study is conducted characterizing the role of polymer concentration, particle/polymer-segment size ratio, and polymer chain length on the structure, polymer induced depletion forces, and the colloid-colloid osmotic second virial coefficient. The theory correctly captures a depletion layer on two different length scales, one on the order of the segment diameter (semidilute regime) and the other on the order of the polymer radius of gyration (dilute regime). The particle/polymer-segment size ratio is demonstrated to play a significant role on the polymer structure near the particle surface at low polymer concentrations, but this effect diminishes at higher polymer concentrations. Results for the polymer-mediated mean force between colloidal particles show that increasing the concentration of the polymer solution encourages particle-particle attraction, while decreasing the range of depletion attraction. At intermediate to high concentrations, depletion attraction can be coupled to a midrange repulsion, especially for colloids in solutions of short chains. Colloid-colloid second virial coefficient calculations indicate that the net repulsion between colloids at low polymer densities gives way to net attraction at higher densities, in agreement with available simulation data. Furthermore, the results indicate a higher tendency toward colloidal aggregation for larger colloids in solutions of longer chains.     

Nanoparticle Halos Mechanism in Stabilizing of Colloidal Suspensions: Polymeric Binder and Dispersant Effects

Dispersion behavior of colloidal Al₂O₃ aqueous suspensions was investigated in the presence of highly charged CeO₂ nanoparticles and polymeric additives. It was found that among the investigated parameters, ceria nanoparticles concentration had the highest significant effect on the stability of Al₂O₃-CeO₂ suspensions. However, the low influence of dispersant concentration may be due to significant role of ceria nanoparticles stabilizing alumina microspheres by “nanoparticle halo” formation. The stabilization of the bidispersed suspensions was also evidenced by scanning electron microscopy and elemental analysis of the sediment layers after three weeks.     

巯基聚乙二醇5000修饰的金溶胶的稳定性: 从DLVO稳定到空间稳定

研究了α-甲氧基-ω-巯基聚乙二醇(mPEG-SH, 5000 MW)修饰的金溶胶的稳定性, 初步探讨了其稳定机制. 将线性mPEG-SH通过巯基化学吸附于金溶胶表面, 可形成高分子层包被的金溶胶. 研究结果表明, PEG修饰的金溶胶可以在pH＝1～13.5或盐浓度高达1.20 mol/L的较苛性条件下保持稳定. 这是由于金溶胶表面吸附的高分子保护层为溶胶提供了新的空间稳定, 取代了溶胶原来的DLVO稳定(实质是电荷稳定). 因而, PEG保护的金溶胶在很大程度上克服了DLVO稳定的溶胶对环境敏感、易聚沉的缺点, 能在复杂的条件(如生理条件)下应用. 鉴于PEG的水溶性、无毒性和生物亲和性, 这种具有较高稳定能力的金纳米粒子/PEG复合体结合了金纳米粒子和PEG的优异性能, 可作为生物纳米探针用于复杂条件下的生物分析.     

Quantitative measurement of nanoparticle halo formation around colloidal microspheres in binary mixtures

A new colloidal stabilization mechanism, known as nanoparticle "haloing" (Tohver, V.; Smay, J. E.; Braem, A.; Braun, P. V.; Lewis, J. A. Proc. Natl. Acad. Sci. U.S.A. 2001, 98, (16), 8950-8954), has been predicted theoretically and inferred experimentally in microsphere-nanoparticle mixtures that possess high charge and size asymmetry. The term "halo" implies the existence of a nonzero separation distance between the highly charged nanoparticles and the negligibly charged microspheres that they surround. By means of ultrasmall-angle X-ray scattering, we have quantified the microsphere-nanoparticle separation distance as well as the number of nanoparticles and their lateral separation distance within the self-organized halos that form in these binary mixtures.     

Production of Gold nanoparticles in aqueous solutions of cellulose derivatives

It is shown that gold nanoparticles can be produced using cellulose ethers, methylhydroxyethyl cellulose, and carboxymethyl cellulose as reducing agents that also play the role of nanoparticle stabilizers. Depending on the synthesis conditions, nanoparticle sizes vary in the range of 20–100 nm. The application of carboxymethyl cellulose as a stabilizer may give rise to the formation of a bimodal ensemble of nanoparticles with sizes of 4–5 and 30–40 nm. The differences in the mechanisms for the reduction and stabilization of gold nanoparticles in the presence of these cellulose derivatives are established by IR spectroscopy. The obtained colloidal dispersions of gold nanoparticles remain stable for a long time.     

Self-organization of bidisperse colloids in water droplets

Most of the colloidal clusters have been produced from oil-in-water emulsions with identical microspheres dispersed in oil droplets. Here, we present new types of binary colloidal clusters from phase-inverted water-in-oil emulsions using various combinations of two different colloids with several size ratios: monodisperse silica or polystyrene microspheres for larger particles and silica or titania nanoparticles for smaller particles. Obviously, a better understanding of how finite groups of different colloids self-organize in a confined geometry may help us control the structure of matter at multiple length scales. In addition, since aqueous dispersions have much better phase stability, we could produce much more diverse colloidal materials from water-in-oil emulsions rather than from oil-in-water emulsions. Interestingly, the configurations of the large microspheres were not changed by the presence of the small particles. However, the arrangement of the smaller particles was strongly dependent on the nature of the interparticle interactions. The experimentally observed structural evolutions were consistent with the numerical simulations calculated using Surface Evolver. These clusters with nonisotropic structures can be used as building blocks for novel colloidal structures with unusual properties or by themselves as light scatterers, diffusers, and complex adaptive matter exhibiting emergent behavior.     

Antibacterial properties of Ag nanoparticle loaded multilayers and formation of magnetically directed antibacterial microparticles

Antibacterial coatings based on hydrogen-bonded multilayers containing in situ synthesized Ag nanoparticles were created on planar surfaces and on magnetic colloidal particles. We report the antibacterial properties of these coatings, determined using a disk-diffusion (Kirby-Bauer) test, as a function of the film thickness and the concentration of Ag nanoparticles in the hydrogen-bonded multilayers. The zone of inhibition (ZoI) determined by the disk-diffusion test increases as the thickness of the multilayer film is increased. Results obtained for the values of the ZoI as a function of film thickness can be described adequately with a simple diffusion model (i.e., the square of the zone of inhibition (ZoI) depended linearly on the logarithm of the thickness of the silver-loaded films). This observation suggests that, in order to incrementally increase the ZoI, an exponentially increasing amount of Ag is required within the multilayers. In general, there was no statistically significant correlation between the zone of inhibition and the number of Ag loading and reduction cycles. The duration of sustained release of antibacterial Ag ions from these coatings, however, could be prolonged by increasing the total supply of zerovalent silver in the films via multiple loading and reduction cycles. These results indicate that the release of silver is controlled by an oxidation mechanism at the surface of the nanoparticles and that repeated loading and reduction of silver leads preferentially to growth of the existing silver nanoparticles in the film as opposed to nucleation of new Ag nanoparticles. We also show that magnetic microspheres coated with silver nanoparticle loaded hydrogen-bonded multilayer thin films can be used to deliver antibacterial agents to specific locations. The minimum inhibitory concentration (MIC) of nanocomposite coated microspheres was determined by the agar dilution technique: antibacterial magnetic microspheres with higher concentrations of Ag nanoparticles exhibited lower MIC values.     

Studies about the influence of self-organization of colloidal magnetic nanoparticles on the magnetic Néel relaxation time

The monodomain magnetic nanoparticle-based colloids are mainly used in biomedical applications. In this type of colloids, there is a tendency of agglomeration even in the absence of external magnetic field. So, the Néel magnetic relaxation time of the system is affected by that tendency. In this paper, we propose a model to study how the nanoparticle tendency to agglomerate in the nanofluid affects the Néel relaxation time of the system. For simulating the self-organization of colloidal nanoparticles, we apply a Monte Carlo method, and the Néel magnetic relaxation time is assessed through the adaptation and solution of Coffey equations in oblique magnetic field, adapted to the local magnetic field on a nanoparticle.     

Polymer-coated ferromagnetic colloids from well-defined macromolecular surfactants and assembly into nanoparticle chains

A novel synthetic route to polymer-coated ferromagnetic colloids of metallic cobalt has been developed. Well-defined end-functional polystyrenes were synthesized using controlled radical polymerization and used as surfactants in the thermolysis of dicobaltoctacarbonyl to afford uniform ferromagnetic nanoparticles. The presence of the polymer shell enabled prolonged colloidal stability of dispersions in a wide range of organic solvents and formed glassy encapsulating coatings around ferromagnetic cores in the solid state. These polymer-coated colloids assembled into robust, micron-sized nanoparticle chains when cast onto supporting surfaces due to dipolar associations of magnetic cores. Hierarchical assemblies were also prepared by blending polystyrene-coated cobalt colloids with larger silica beads.