Dynamic covalent hydrogels are facilely prepared from biocompatible polysaccharides in physiological conditions by the formation of phenylboronate ester cross‐links. This is based on the simple mixing of carboxylate‐containing polysaccharides (i.e., hyaluronic acid or carboxymethylcellulose) modified with phenylboronic acid and maltose moieties according to mild coupling reactions performed in aqueous solution. The formation of dynamic networks based on reversible boronic‐ester cross‐links is demonstrated by analyzing their rheological behavior. This study shows that these gels can adapt their structure in response to chemical stimuli such as variations in pH or addition of glucose and self‐heal.
Serial novel chiral polydiacetylenes (PDAs) are efficiently prepared at room temperature by the controllable electrophoretic deposition of diacetylenes with tunable structure as designed from easily available starting materials. The colorimetrically reversible properties of PDAs in the range between 25 and 85 °C are influenced by the different amino acid moiety in the PDAs as anticipated. The PDA containing aromatic ring is much better for the colorimetrically reversible properties, while irreversible thermochromism is displayed for the PDA with the structure of the longer methylene units in the main chain of amino acid moiety.
This article summarizes recent progress in the post‐functionalization of conjugated polymers by electrochemical methods. These electrochemical polymer reactions typically proceed via electrochemical doping of a conjugated polymer film, followed by chemical transformation. Examples include the quantitative oxidative fluorination of polyfluorenes and oxidative halogenation of polythiophenes, as well as the reductive hydrogenation of polyfluorenones. The degree of functionalization, otherwise known as the reaction ratio, can be controlled by varying the charge passed through the polymer, allowing the optoelectronic properties of the conjugated polymers to be tailored. Wireless bipolar electrodes with an in‐plane potential distribution are also useful with regard to the electrochemical doping and reaction of conjugated polymers and allow the synthesis of films exhibiting composition gradients. Such bipolar electrochemistry can induce multiple reaction sites during electrochemical polymer reactions.
The chemical synthesis of a novel polyfuran, poly(2,3‐bis(hexylthio)‐[1,4]dithiino[2,3‐c]furan) ( PBDF ), substituted at the 2,3‐positions with an S‐alkylated dithiin unit, is reported. The new polymer has been characterized in terms of its electronic absorption, electrochemical, and thermal properties. Employment of the dithiin moiety provides intrinsic additional electroactivity, as well as a functional handle for substitution with alkyl groups, enhancing the processability of the polymer. The new polymer is compared with the closely related and well‐established literature compounds PEDOT and PEDTT as well‐studied, highly chalcogenated polythiophenes.
A facile and versatile method for the synthesis of Janus graphene oxide (GO) nanosheets with different structures is reported. Based on electrostatic assembly, Janus GO nanosheets can be easily functionalized with a template polymer or be defunctionalized by altering the ionic strength. By using this approach, Janus GO nanosheets are prepared successfully with hydrophobic polystyrene chains on one side and hydrophilic poly(2‐(dimethylamino)ethyl methacrylate) chains on the other side.
Fluorescent photolabile groups undergoing convenient synthesis and fast cleavage are being explored because of their increasing utility in both synthetic and biological chemistry. Herein, a model photosensitive poly(ethylene glycol)‐lipid of NP‐B‐PEG with a 2‐nitrobenzyl 2‐pyridinylmethyl borate hydrophobic tail is synthesized. The 1H‐NMR and absorption spectra analysis of NP‐B‐PEG upon 365 nm irradiation in water supports a rapid photocleavage of nitrobenzyl borate with the concomitant hydrolysis of 2‐pyridinylmethyl borate. It is also shown that the borate tail hydrolyzes slowly in water. Fortunately, when the polymer aqueous solution is loaded with the hydrophobic doxorubicin (DOX), the borate hydrolysis can be much retarded. The phototriggered experiment shows a two‐stage DOX release: first, the slow leakage as a result of the photocleavage of 2‐nitrobenzyl borate before the vesicle disintegration; second, the quick DOX precipitation from the disintegrated vesicles induced by the speeding up hydrolysis of 2‐pyridinylmethyl borate.
A recent response on a publication from our team investigating solvent effects on propagation rate coefficients is commented. Among other issues, we point to the fact that the response interprets only a subset of the data provided in our original contribution.
A unique method of fabricating PS/AuNPs composite particles in ex situ mode is proposed on the basis of thermodynamically driving mechanism. It is facile and versatile as it eliminates the need for surface functionalizations and modifications of both PS microspheres and AuNPs. The PS/AuNPs composite particles take on a raspberry‐like morphology with controllable coverage according to some thermodynamic factors, which have been extensively characterized by scanning electron microscopy, transmission electron microscopy, and thermogravimetric analysis. More importantly, the PS/AuNPs composite particles hold higher catalytic efficiency and better repeatability than the previously reported results, which are confirmed in two oxidation–reduction reactions of 2‐nitroaniline/NaBH4 and rhodamine B/NaBH4.
Multivalent binding is a key for many critical biological processes and unique recognition and specificity in binding enables many of different glycans and proteins to work in a great harmony within the human body. In this study, the binding kinetics of synthetic glycopolypeptides to the dendritic cell lectin DC‐SIGN and their inhibition potential for DC‐SIGN interactions with the gp120 envelope glycoprotein of HIV‐1 (gp120) are investigated.
Electrospun core–shell fibers have great potentials in many areas, such as tissue engineering, drug delivery, and organic solar cells. Although many core–shell fibers have been prepared and studied, the morphology transformation of core–shell fibers have been rarely studied. In this work, the morphology evolution of electrospun core–shell polymer fibers driven by the Plateau–Rayleigh instability is investigated. Polystyrene/poly(methyl methacrylate) (PS/PMMA) core–shell fibers are first prepared by using blend solutions and a single axial electrospinning setup. After PS/PMMA core–shell fibers are annealed on a PS film, the fibers undulate and sink into the polymer film, forming core–shell hemispheres. The evolution process, which can be observed in situ by optical microscopy, is mainly driven by achieving lower surface and interfacial energies. The morphologies of the transformed structures can be confirmed by a selective removal technique, and polymer microbowls can be obtained.
Polymeric nanosheets organized by molecular building blocks bearing specifically oriented reactive groups provide abundant and versatile strategies for tailoring structure and chemical functionality periodically over extended length scales that complement graphene. Here we report the bulk synthesis of free‐standing polymeric nanosheets via spatially confined polymerization from an elaborate 2D supramolecular system composed of two liquid‐crystalline lamellar bilayer membranes of a self‐assembled nonionic surfactant—dodecylglyceryl itaconate (DGI)—sandwiched by a water layer. By employing a covalent polymerization on the lamellar bilayer membranes, single‐bilayer‐thick (4.2 nm), and large area (greater than 100 μm2) polymeric nanosheets of bilayer membranes are achieved. The polymeric nanosheets could serve as a well‐defined 2D platform for post‐functionalization for producing advanced hybrid materials by introducing the reactions on the hydroxyl groups at the head of DGI on the outer surfaces.
Optically active nano‐ and microparticles have constituted a significant category of advanced functional materials. However, constructing optically active particles derived from synthetic helical polymers still remains as a big challenge. In the present study, it is attempted to induce a racemic helical polymer (containing right‐ and left‐handed helices in equal amount) to prefer one predominant helicity in aqueous media by using emulsifier in the presence of chiral additive (emulsification process). Excitingly, the emulsification process promotes the racemic helical polymer to unify the helicity and directly provides optically active nanoparticles constructed by chirally helical polymer. A possible mechanism is proposed to explain the emulsification‐induced homohelicity effect. The present study establishes a novel strategy for preparing chirally helical polymer‐derived optically active nanoparticles based on racemic helical polymers.
A thiofunctional thiazolidine is introduced as a new low‐molar‐mass building block for the introduction of cysteine residues via a thiol‐ene reaction. Allyl‐functional polyglycidol (PG) is used as a model polymer to demonstrate polymer‐analogue functionalization through reaction with the unsaturated side‐chains. A modified trinitrobenzenesulfonic acid (TNBSA) assay is used for the redox‐insensitive quantification and a precise final cysteine content can be predetermined at the polymerization stage. Native chemical ligation at cysteine‐functional PG is performed as a model reaction for a chemoselective peptide modification of this polymer. The three‐step synthesis of the thiofunctional thiazolidine reactant, together with the standard thiol‐ene coupling and the robust quantification assay, broadens the toolbox for thiol‐ene chemistry and offers a generic and straightforward approach to cysteine‐functional materials.
Porous hollow silica particles (HSPs) are presented as new templates to control the product morphology in metallocene‐catalyzed olefin polymerization. By selectively immobilizing catalysts inside the micrometer‐sized porous hollow silica particles, the high hydraulic forces resulting from polymer growth within the confined geometries of the HSPs cause its supporting shell to break up from the inside. As the shape of the support is replicated during olefin polymerization, perfectly spherical product particles with very narrow size distribution can be achieved by using HSPs exhibiting a monomodal size distribution. Furthermore, the size of the obtained product particles can be controlled not only by the polymerization time but also by the size of the support material.
The present review focuses on the recent progress made in thin film orientation of semi‐conducting polymers with particular emphasis on methods using epitaxy and shear forces. The main results reported in this review deal with regioregular poly(3‐alkylthiophene)s and poly(dialkylfluorenes). Correlations existing between processing conditions, macromolecular parameters and the resulting structures formed in thin films are underlined. It is shown that epitaxial orientation of semi‐conducting polymers can generate a large palette of semi‐crystalline and nanostructured morphologies by a subtle choice of the orienting substrates and growth conditions.
Cross‐linked azobenzene liquid‐crystalline polymer films with a poly(oxyethylene) backbone are synthesized by photoinitiated cationic copolymerization. Azobenzene moieties in the film surface toward the light source are simultaneously photoaligned during photopolymerization with unpolarized 436 nm light and thus form a splayed alignment in the whole film. The prepared films show reversible photoinduced bending behavior with opposite bending directions when different surfaces of one film face to ultraviolet light irradiation.
Two‐dimensional (2D) palladium nanocube array is achieved on plasma‐etched block copolymer templates, while the well‐aligned nanocubes remain active. Anisotropic nanocubes are site‐selectively assembled on various nanopatterns by capillary force. The nanocube array is proved to be easily tunable, and the dimensional commensurability plays a key role in the configurations of the nanocube assemblies. Not only catalytic nanocube array under confinement but also template for the growth of nanoscale zinc oxide (ZnO) nanorods is exemplified as the potential application of the nanoarray.
The surface of polyacrylonitrile (PAN) film is treated with ethyleneamines (EDA) in a simple chemical vapor phase reaction. Successful introduction of amine functional groups on the cyano group of PAN backbone is verified by FT‐IR and NMR measurements. Further UV‐vis and photoluminescence analyses show a red shift of the emission peak after repeated EDA treatment, which might be attributed to the formation of imine conjugation from newly formed carbon‐nitrogen bonds on the PAN backbone. Further confocal laser scanning microscopy reveals that selective patterning of EDA on PAN films is possible via local polydimethylsiloxane masking. The results indicate that both chemical and optical patterning on PAN film can be realized via a single reaction and show the potential of this novel methodology in selective patterning.
Hierarchical self‐assembly of transient composite hydrogels is demonstrated through a two‐step, orthogonal strategy using nanoparticle tectons interconnected through metal–ligand coordination complexes. The resulting materials are highly tunable with moduli and viscosities spanning many orders of magnitude, and show promising self‐healing properties, while maintaining complete optical transparency.
