含氟聚芳醚酮的合成与性能研究

研究了含氟基团的引入对聚醚醚酮(PEEK)的介电常数、溶解性、结晶性和力学性能等的影响. 结果表明, 这种含氟聚芳醚酮在保持PEEK良好机械性能的条件下, 介电常数达到2.7, 且频率依赖性小, 成膜性能好, 成本比相应的含氟PI低5～10倍, 有望成为一种极有实用价值的电子封装材料. 同时利用合成的含氟单体合成了一系列不同-CF3取代基含量的聚芳醚酮共聚物, 研究了聚芳醚酮共聚物的介电常数与聚合物结构单元中-CF3取代基含量的关系. 结果表明, 聚芳醚酮共聚物的介电常数随聚合物结构单元中-CF3取代基含量的增加而线性降低.     

侧链含卤素基团聚芳醚酮的合成及性能

通过分子设计, 合成了新型含碘基苯基的双酚单体4-碘苯基对苯二酚(I-Ph-HQ), 利用上述单体与含氟双酚单体(3-三氟甲基)苯基对苯二酚和氟酮通过亲核取代缩聚反应合成了一系列侧链含卤素基团的聚芳醚酮共聚物(PEEK-CF₃-I). 通过FTIR和 ¹H NMR等测试手段, 表征了共聚物的化学结构. 研究了所合成的PEEK-CF₃-I共聚物的介电性能、热性能和机械性能, 探讨了共聚物中含碘侧基和含氟侧基含量的变化及对材料各项性能的影响. 研究表明, 共聚物中含碘侧基含量的增加能够显著提升共聚物的玻璃化转变温度, 其中共聚物材料PEEK-CF₃-I-10%的玻璃化转变温度为153 ℃, 同时材料依然能够保持优异的机械性能和较低的介电常数.     

含氰基侧基聚芳醚砜的合成与表征

汉２，６－二卤苯甲腈、４，４′－二氯二苯砜、４，４′－二羟基二苯砜、间苯二酚、对苯二酚、酚酞及双酚Ａ为主要原料，合成了含不同结构单元和不同氰基含量的含氰基侧基的聚芳醚砜，并采用ＩＲ、＾１３ＣＮＭＲ等分析手段对其结构进行了表征，同时研究了结构单元和氰基含量对聚芳醚砜性能的影响。     

聚醚酮醚酮酮/含萘环聚醚酮醚酮酮无规共聚物的合成与性能

在无水AlCl3及N－甲基吡咯烷酮（NMP）存在下，以4,4′-二（α－萘氧基）二苯酮（DNBP）作为第三单体，将其与4，4′－二苯氧基二苯酮（DPBP）和对苯二甲酰氯（TPC）在1，2－二氯乙烷（DCE）中进行低温溶液共缩聚反应，合成了一系列聚醚酮醚酮酮／含萘环聚醚酮酮醚酮酮无规共聚物，用IR、DSC、TG及WAXD等方法对其结构和性能进行了表征与测试。研究结果表明共聚物的玻璃化转变温度（Tg)要比纯PEKEKK的高，而其熔融温度（Tm)和结晶度（Xc)则随共聚物中含萘环PEKEKK结构单元含量的增加而逐渐降低。共聚物具有优异的耐热性能及抗腐蚀性能。     

新型可溶性含氟聚芳醚酮的合成、表征及性能

制备了新型可溶性含氟聚芳醚酮高性能材料, 使该材料结合了含氟聚合物与聚芳醚酮两种材料的优点, 既具有很好的热稳定性、溶解性和阻燃性, 又有较低的介电常数和吸湿性[5,9,10]. 对于提高聚芳醚酮类材料的性能, 拓展其使用范围和加工方法具有很大的开发前景和实用价值.     

聚芳醚酮类高聚物的合成与热性能研究

利用合成的新型单体,采用亲核取代法制备了5类聚芳醚酮.用DSC和WAXD对聚合物的研究表明:新型聚芳醚酮与聚醚醚酮的结晶结构相同,其熔点及玻璃化转变温度均随聚合物结构单元中酮基含量的增加而升高.     

聚芳醚醚酮和磺化聚芳醚醚酮的热分解动力学

 用热重法(TG)研究了聚芳醚醚酮(PEEK)和磺化改性的聚芳醚醚酮(S-PEEK)的热分解动力学,计算了热分解动力学参数,结果表明PEEK及S-PEEK的热分解符合无规引发裂解模型。进一步考察了磺化对PEEK热分解的影响,结合温度程序裂解色谱-质谱结果,探讨了S-PEEK的TG曲线上呈现二个失重台阶的意义。     

聚芳醚醚酮和磺化聚芳醚醚酮的热分解动力学

用热重法(TG)研究了聚芳醚醚酮(PEEK)和磺化改性的聚芳醚醚酮(S-PEEK)的热分解动力学,计算了热分解动力学参数,结果表明PEEK及S-PEEK的热分解符合无规引发裂解模型。进一步考察了磺化对PEEK热分解的影响,结合温度程序裂解色谱-质谱结果,探讨了S-PEEK的TG曲线上呈现二个失重台阶的意义。     

聚醚砜醚酮的合成与性能

以4,4′-二羟基二苯砜和4,4′-二氟二苯酮为单体, 通过溶液缩聚合成了聚醚砜醚酮(PESEK), 其分子结构相当于聚醚砜(PES)与聚醚醚酮(PEEK)的交替共聚物. 在共聚物分子中, 存在砜基、醚基和酮基, 整个结构单元形成了大共轭体系, 聚合物属无定形聚合物, 玻璃化转变温度(Tg)为198 ℃, 介于PEEK和PES的Tg之间, 其热稳定性和加工性能优于PES, 而力学性能与PES接近.     

新型多氯取代聚芳醚酮砜的合成与表征

新型多氯取代聚芳醚酮砜的合成与表征;聚芳醚酮砜;四氯对苯二甲酰氯;低温溶液缩聚;无规共聚物     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

A carbanion induced synthesis of highly congested pyrazole and imidazole containing heterocycles

An efficient approach to the synthesis of highly congested di, penta and hexacyclic pyrazoles as well as imidazole fragment containing novel heterocyclic molecule has been developed through a carbanion induced transformation of suitably functionalized 2H-pyran-2-ones, benzo[h]chromene and thiochromeno[4,3-b]pyrans. Due to the presence of fluorescence, we report their prime application metal sensor as off/on switching in ferric ions.     

Synthesis of pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles by Curtius reaction in Morita-Baylis-Hillman derivatives

Synthesis of substituted pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles from the Morita-Baylis-Hillman derivatives of acrylates via saponification followed by Curtius reaction is described.     

Selective synthesis of 4,5-dihydroimidazo- and imidazo[1,5-a]quinoxalines via modified Pictet–Spengler reaction

An efficient tandem approach for the selective synthesis of 4,5-dihydroimidazo[1,5-a]quinoxalines 6a–g and imidazo[1,5-a]quinoxalines 7a–h by the reaction of 2-imidazolyl anilines 4a–c with aryl aldehydes 5a–k under mild reaction conditions is described. Introduction of electron releasing alkyl groups in substrates 4a–b was found to be instrumental for the success of the reaction.     

Understanding the Diels-Alder reactivity of 1,2-azaborine analogues

The Diels-Alder reactivity of 1,2-heteroborines (H₄C₄B(H)X, X?=?NH, PH, AsH; O, S, Se) has been computationally explored by means of Density Functional Theory (DFT) calculations. The influence of the HB?=?X fragment on the reactivity of the system has been quantitatively analyzed in detail by means of the so-called Activation Strain Model (ASM) of reactivity. It is found that the interaction between these species and the dienophile is significantly stronger than that computed for their all-carbon isoelectronic counterpart, benzene. In addition, the strain energy plays a key role in the observed reactivity trends. The role of the aromaticity strength of these heteroarenes on the reactivity is also assessed.