In situ carbon nanotube synthesis by the reduction of NiO/γ-Al_2O_3 catalyst in methane

The synthesis of carbon nanotubes (CNTs) via chemical vapour deposition of methane on NiO/γ-Al2O3 catalyst has been investigated.The reduction behavior of NiO/γ-Al2O3 by methane was studied using thermogravimetric (TG) and X-ray diffraction (XRD) techniques.It was found that the NiO supported on γ-Al2O3,was reduced to Ni0 in methane atmosphere in the temperature range of 710-770℃.The catalytic activity of NiO/γ-Al2O3 for CNTs synthesis by in situ chemical vapour deposition of methane during the reduction was also investigated.Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) were used to observe the CNTs produced at various reduction temperatures.The results indicated that the reduction temperature exhibits obvious influence on the morphology and the yield of CNTs.CNTs with the diameter of about 20 nm were obtained at reduction temperature of 750℃,and higher reduction temperature (such as 800 and 850℃) led to an increase in CNTs diameter and a decrease in CNTs yield.     

In situ carbon nanotube synthesis by the reduction of NiO/γ-Al2O3 catalyst in methane

The synthesis of carbon nanotubes (CNTs) via chemical vapour deposition of methane on NiO/γ-Al2O3 catalyst has been investigated. The reduction behavior of NiO/γ-Al2O3 by methane was studied using thermogravimetric (TG) and X-ray diffraction (XRD) techniques. It was found that the NiO supported on γ-Al2O3, was reduced to Ni⁰ in methane atmosphere in the temperature range of 710--770 ℃. The catalytic activity of NiO/γ-Al2O3 for CNTs synthesis by in situ chemical vapour deposition of methane during the reduction was also investigated. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) were used to observe the CNTs produced at various reduction temperatures. The results indicated that the reduction temperature exhibits obvious influence on the morphology and the yield of CNTs. CNTs with the diameter of about 20 nm were obtained at reduction temperature of 750 ℃, and higher reduction temperature (such as 800 and 850 ℃) led to an increase in CNTs diameter and a decrease in CNTs yield.     

Study on Diameter Controlled Growth of Carbon Nanotubes by LaAl1-xFexO3 Catalysts

A series of LaAl1-xFexO3 catalysts prepared with lanthanum nitrate, aluminium nitrate and iron nitrate was investigated in catalytical syntheses of carbon nanotubes with high yields and purity. The properties of carbon nanotubes prepared by the method of CVD(chemical vapor deposition) with n-hexane as the carbon resource were studied and it was shown that the diameter of carbon nanotubes can be controlled by the molar ratio of iron to aluminum in the catalysts and that the diameter of carbon nanotubes changes a little with the decrease of the iron content in the catalysts. From the TEM pictures of carbon nanotubes, it can be found that the LaAl1-xFexO3 catalysts have a significant influence on the wall thickness of the carbon nanotubes, whereas they have little influence on the inner diameter of the carbon nanotubes.     

A parametric study of methane decomposition into carbon nanotubes over 8Co-2Mo/Al2O3 catalyst

The effects of reaction temperature, partial pressure of methane, catalyst weight and gas hourly space velocity (GHSV) on methane decomposition were reported. The decomposition reaction was performed in a vertical fixed-bed reactor over 8Co-2Mo/Al 2 O 3 catalyst. The experimental results show that these four process parameters studied had vital effects on carbon yield. As revealed by the electron microscopy and Raman spectroscopy analyses, the reaction temperature and GHSV governed the average diameter, the diameter distribution and the degree of graphitization of the synthesized carbon nanotubes (CNTs). Also, an evidence is presented to show that higher temperatures and higher GHSV favored the formation of better-graphitized CNTs with larger diameters.     

Preparation and Characterization of Carbon Nanotubes-Coated Cordierite for Catalyst Supports

The carbon nanotubes-coated cordierite (CNTs-cordierite) was fabricated by pyrolysis of ethine on cordierite with iron catalyst, which was penetrated into the cordierite substrate by vacuum impregnation. The cordierite substrate, carbon naontubes, and CNTs-cordierite were characterized by SEM. TEM/HREM. BET, and TGA. The results show that the carbon nanotubes were distributed uniformly on the surface of cordierite. A significant increase in BET surface area and pore volume was observed, and a suitable pore-size distribution was obtained. On the CNTs-cordierite, carbon nanotubes penetrated into the cordierite substrate, which led to a remarkable stability of the CNTs against ultrasound maltreatment. Growth time is an important factor for thermostability and texture of the sample. The mass increased but the purity decreased with the growth time, which caused the exothermic peak shift to low temperature, and the corresponding full width half maximum (FWHM) of the peak in DTG increased.     

化学气相沉积合成碳包裹镍纳米晶的初步研究

Nickel nanocrystals encapsulated in carbon shells were prepared by the large body knowledge developed for the growth of carbon nanotubes (CNTs), i.e. chemical vapor deposition. The products were characterized by transmission electron microscopy, XRD and FTIR. The results showed that the oxidization of CNT surface made it possible to interreact with nickel ions in solution. Ni-impregnated CNTs transformed into monocrystalline nickel nanoparticles supported on CNTs at 600 ℃ in nitrogen atmosphere. Subsequently, they would be covered with graphene layers during reaction with acetylene at 600 ℃. The formation mechanism has been preliminarily discussed on experimental results.     

用于甲烷水蒸气重整的镍基催化剂的失活和再生

The deactivation of nickel catalysts used in Arak and Razi petrochemical complexes followed by catalyst regeneration was evalu-ated. The characterization of the different structures was made by powder X-ray diffraction(XRD),scanning electron microscopy(SEM),energy dispersive X-ray spectroscopy(EDS),transmission electron microscopy(TEM),and carbon & sulfur analyzer. The Ni particle size was estimated from XRD patterns and TEM graphs. The agglomeration of nickel particle and the poison by sulfur components were recognized as the main reasons in deactivation of Arak and Razi catalysts,respectively. The activity of the used catalysts before and after regeneration was measured on methane steam reforming at a CH4:H2O ratio of 1:3 at 850 oC. The regeneration processes for Arak and Razi samples were performed with CO2 as an oxidative atmosphere and steam as a regenerating agent,respectively. The results show that,(1) no residual sulfur components were on the regenerated Razi catalyst surface without changing the structure of the catalyst and the regenerated catalyst has gained 80% of its catalytic activity,and that(2) the nickel particle size of regenerated Arak specimen decreased remarkably as measured by Debye-Scherrer equation from XRD patterns. TEM images were in agreement with the XRD results and indicated a decrease in nickel particle size of regenerated catalyst. Additionally,in both regenerated catalysts all the coke on the surface of the support was eliminated after regeneration.     

铈掺杂纳米ZnO结构与室温脱硫性能的相关性研究

Nano-ZnO desulfurizer doped with cerium was prepared by homogeneous precipitation. The bulk and surface structures were characterized by TG-DTA, XRD, XPS and TEM. The desulfurizing performance at ambient temperature was studied. The results show that at ambient temperature the desulfurizing activities of nano-Ce-ZnO desulfurizer are closely related to the particle size, the electron density on desulfurizer surface and the quantity of active sites. Compared with nano-ZnO, nano-Ce-ZnO desulfurizer calcined at 270 ℃ showed smaller particle size and higher surface electron density, which favored the adsorption and reaction of H₂S, resulting in improved desulfurizing activity at ambient temperature since the quantity of Zn^(2-δ)+ became greater by electron gain of zinc ion from cerium ion. The tendency for zinc and cerium to be separated out as individual oxide from Ce-ZnO desulfurizer would increase as the calcination temperature was raised. The enrichment of cerium on the surface of ZnO made decrease the active sites for H₂S adsorption, which led to the decrease in desulfurization activity at ambient temperature.     

Effect of functionalized multi-walled carbon nanotubes with poly(N-vinyl pyrrolidone-co-2-acrylamido-2-methyl-1-propanesulfonic acid) on the release of tramadol hydrochloride

Multi-walled carbon nanotubes(MWCNTs) were grafted with poly(N-vinyl-2-pyrrolidone) and with poly(2-acrylamido-2-methyl-1-propanesulfonic acid) at different compositions by using γ-rays technique as initiator. The MWCNTs, MWCNT-graft-PNVP, MWCNT-graft-PAMPS and MWCNTs-graft-P(NVP-co-AMPS) were characterized by Fourier transform infra red(FTIR) spectroscopy, X-ray diffraction(XRD), thermal gravimetric analysis(TGA), elemental analysis and high-resolution transmission electron microscopy(HR-TEM). The results indicated that the grafting processes of PNVP, PAMPS and P(NVP-co-AMPS) occurred on to the surfaces of MWCNTs without destroying the framework of MWCNTs. Tramadol hydrochloride(TH) was loaded as model drug and its release behavior was analyzed via various kinetic models. Release of the loaded TH was studied in simulated gastric fluid(SGF, p H = 1.2) and simulated intestinal fluid(SIF, p H = 7.4) at 37 °C. Controlled release of TH from grafted MWCNTs was investigated. The outcome results suggest that the grafted MWCNTs could be used as a promising matrix candidate for oral drug delivery system by harmonization between the composition and p H level of the simulated biological fluids.     

Effect of catalyst confinement and pore size on Fischer-Tropsch synthesis over cobalt supported on carbon nanotubes

This paper studies the impact of structure of cobalt catalysts supported on carbon nanotubes(CNT) on the activity and product selectivity of Fischer-Tropsch synthesis(FTS) reaction.Three types of CNT with average pore sizes of 5,11,and 17 nm were used as the supports.The catalysts were prepared by selectively impregnating cobalt nanoparticles either inside or outside CNT.The TPR results indicated that the catalyst with Co particles inside CNT was easier to be reduced than those outside CNT,and the reducibility of cobalt oxide particles inside the CNT decreased with the cobalt oxide particle size increasing.The activity of the catalyst with Co inside CNT was higher than that of catalysts with Co particles outside CNT.Smaller CNT pore size also appears to enhance the catalyst reduction and FTS activity due to the little interaction between cobalt oxide with carbon and the enhanced electron shift on the non-planar carbon tube surface.