In-situ Grown SnO2 Nanospheres on Reduced GO Nanosheets as Advanced Anodes for Lithium-ion Batteries

Nanostructured tin dioxide (SnO₂) has emerged as a promising anode material for lithium-ion batteries (LIBs) due to its high theoretical capacity (1494 mA h g⁻¹) and excellent stability. Unfortunately, the rapid capacity fading and poor electrical conductivity of bulk SnO₂ material restrict its practical application. Here, SnO₂ nanospheres/reduced graphene oxide nanosheets (SRG) are fabricated through in-situ growth of carbon-coated SnO₂ using template-based approach. The nanosheet structure with the external layer of about several nanometers thickness can not only accommodate the volume change of Sn lattice during cycling but also enhance the electrical conductivity effectively. Benefited from such design, the SRG composites could deliver an initial discharge capacity of 1212.3 mA h g⁻¹ at 0.1 A g⁻¹, outstanding cycling performance of 1335.6 mA h g⁻¹ after 500 cycles at 1 A g⁻¹, and superior rate capability of 502.1 mA h g⁻¹ at 5 A g⁻¹ after 10 cycles. Finally, it is believed that this method could provide a versatile and effective process to prepare other metal-oxide/reduced graphene oxide (rGO) 2D nanocomposites.     

Understanding the High-Performance Anode Material of CoC2O4⋅2 H2O Microrods Wrapped by Reduced Graphene Oxide for Lithium-Ion and Sodium-Ion Batteries

Metal oxalate has become a most promising candidate as an anode material for lithium-ion and sodium-ion batteries. However, capacity decrease owing to the volume expansion of the active material during cycling is a problem. Herein, a rod-like CoC₂O₄⋅2 H₂O/rGO hybrid is fabricated through a novel multistep solvo/hydrothermal strategy. The structural characteristics of the CoC₂O₄⋅2 H₂O microrod wrapped using rGO sheets not only inhibit the volume variation of the hybrid electrode during cycling, but also accelerate the transfer of electrons and ions in the 3 D graphene network, thereby improving the electrochemical properties of CoC₂O₄⋅2 H₂O. The CoC₂O₄⋅2 H₂O/rGO electrode delivers a specific capacity of 1011.5 mA h g⁻¹ at 0.2 A g⁻¹ after 200 cycles for lithium storage, and a high capacity of 221.1 mA h g⁻¹ at 0.2 A g⁻¹ after 100 cycles for sodium storage. Moreover, the full cell CoC₂O₄⋅2 H₂O/rGO//LiCoO₂ consisting of the CoC₂O₄⋅2 H₂O/rGO anode and LiCoO₂ cathode maintains 138.1 mA h g⁻¹ after 200 cycles at 0.2 A g⁻¹ and has superior long-cycle stability. In addition, in situ Raman spectroscopy and in situ and ex situ X-ray diffraction techniques provide a unique opportunity to understand fully the reaction mechanism of CoC₂O₄⋅2 H₂O/rGO. This work also gives a new perspective and solid research basis for the application of metal oxalate materials in high-performance lithium-ion and sodium-ion batteries.     

Ultrathin Titanate Nanosheets/Graphene Films Derived from Confined Transformation for Excellent Na/K Ion Storage

Confined transformation of assembled two‐dimensional MXene (titanium carbide) and reduced graphene oxide (rGO) nanosheets was employed to prepare the free‐standing films of the integrated ultrathin sodium titanate (NTO)/potassium titanate (KTO) nanosheets sandwiched between graphene layers. The ultrathin Ti‐based nanosheets reduce the diffusion distance while rGO layers enhance conductivity. Incorporation of graphene into the titanate films produced efficient binder‐free anodes for ion storage. The resulting flexible NTO/rGO and KTO/rGO electrodes exhibited excellent rate performances and long cycling stability characterized by reversible capacities of 72 mA h g^?1 at 5 A g^?1 after 10000 cycles and 75 mA h g^?1 after 700 cycles at 2 A g^?1 for sodium and potassium ion batteries, respectively. These results demonstrate the superiority of the unique sandwich‐type electrodes.     

Amorphous Selenium and Crystalline Selenium Nanorods Graphene Composites as Cathode Materials for All-Solid-State Lithium Selenium Batteries

Selenium (Se) is an element in the same main group as sulfur and is characterized by high electrical conductivity and large capacity (675 mAh g⁻¹). Herein, a novel ultra-high dispersion amorphous selenium graphene composite (a-Se/rGO) was synthesized and a selenium nanorods graphene composite (b-Se/rGO) was prepared by hydrothermal method as the cathode material for all solid-state lithium−selenium (Li−Se) batteries, hoping to improve the efficiency and utilization rate of active substances in all solid-state batteries. The all-solid-state batteries were assembled using a heated thawing electrolyte (2LiIHPN−LiI; HPN=3-hydroxypropionitrile). The utilization rate of a-Se/rGO was 103 % and the capacity was 697 mAh g⁻¹, which remained at 281 mAh g⁻¹ (41.6 % of the 675 mAh g⁻¹) after 30 cycles under 0.5 C. Notably, a-Se/rGO showed excellent performance concerning its utilization rate, with a capacity of up to 610 mAh g⁻¹ at 2 C, due to the high availability of amorphous Se and the special properties of the electrolytes. However, in the charge and discharge cycles, the second discharge capacity of a-Se/rGO was more significantly attenuated than that of the first discharge due to the formation of larger crystals of selenium during the charging process. The battery assembled using b-Se/rGO maintained a capacity of 270.58 mAh g⁻¹ after 30 cycles (the retention rate of discharge capacity was 66.13 % compared with that in the first cycle). Through TEM and other relevant tests, it is speculated that amorphous selenium is conducive to capacity release, which, however, is affected by the formation of crystalline selenium after the first charge process.     

Biomimetic Straw-Like Bundle Cobalt-Doped Fe2O3 Electrodes towards Superior Lithium-Ion Storage

Biomimetic straw-like bundles of Co-doped Fe₂O₃ (SCF), with Co²⁺ incorporated into the lattice of α-Fe₂O₃, was fabricated through a cost-effective hydrothermal process and used as the anode material for lithium-ion batteries (LIBs). The SCF exhibited ultrahigh initial discharge specific capacity (1760.7 mA h⁻¹ g⁻¹ at 200 mA g⁻¹) and cycling stability (with the capacity retention of 1268.3 mA h⁻¹ g⁻¹ after 350 cycles at 200 mA g⁻¹). In addition, a superior rate capacity of 376.1 mA h⁻¹ g⁻¹ was obtained at a high current density of 4000 mA g⁻¹. The remarkable electrochemical lithium storage of SCF is attributed to the Co-doping, which increases the unit cell volume and affects the whole structure. It makes the Li⁺ insertion–extraction process more flexible. Meanwhile, the distinctive straw-like bundle structure can accelerate Li ion diffusion and alleviate the huge volume expansion upon cycling.     

Electrostatic Interactions Leading to Hierarchical Interpenetrating Electroconductive Networks in Silicon Anodes for Fast Lithium Storage

Recently, the frequency of combining MXene, which has unique properties such as metal-level conductivity and large specific surface area, with silicon to achieve excellent electrochemical performance has increased considerably. There is no doubt that the introduction of MXene can improve the conductivity of silicon and the cycling stability of electrodes after elaborate structure design. However, most exhaustive contacts can only improve the electrode conductivity on the plane. Herein, a MXene@Si/CNTs (HIEN-MSC) composite with hierarchical interpenetrating electroconductive networks has been synthesized by electrostatic self-assembly. In this process, the CNTs are first combined with silicon nanoparticles and then assembled with MXene nanosheets. Inserting CNTs into silicon nanoparticles can not only reduce the latter‘s agglomeration, but also immobilizes them on the three-dimensional conductive framework composed of CNTs and MXene nanosheets. Therefore, the HIEN-MSC electrode shows superior rate performance (high reversible capacity of 280 mA h⁻¹ even tested at 10 A g⁻¹), cycling stability (stable reversible capacity of 547 mA h g⁻¹ after 200 cycles at 1 A g⁻¹) and applicability (a high reversible capacity of 101 mA h g⁻¹ after 50 cycles when assembled with NCM622 into a full cell). These results may provide new insights for other electrodes with excellent rate performance and long-cycle stability.     

Nitrogen-Linked Hexaazatrinaphthylene Polymer as Cathode Material in Lithium-Ion Battery

Nitrogen-linked hexaazatrinaphthylene polymer ( N²-HATN ) as organic cathode material with low HOMO–LOMO gap was synthesized and was observed to possess reversible high capacity and unexpected long-term cycling stability. The pre-treated N²-HATN and pRGO combination demonstrated good structure compatibility and the resultant cathode exhibited a constant increment of capacity during the redox cycles. The initial capacity at 0.05 A g⁻¹ was 406 mA h⁻¹ g⁻¹, and increased to 630 mA h⁻¹ g⁻¹ after 70 cycles. At 0.5 A g⁻¹ discharging rate, the capacity increased from an initial value of 186 mA h⁻¹ g⁻¹ to 588 mA h⁻¹ g⁻¹ after 1600 cycles. The pseudocapacitance-type behavior is postulated to be attributed to the structure compatibility between the active material and pRGO.     

Flower-like Spherical α-Ni(OH)2 Derived NiP2 as Superior Anode Material of Sodium-Ion Batteries

Transition metal phosphides (TMPs) are promising anode candidates for sodium-ion batteries, due to their high theoretical specific capacity and working potential. However, the low conductivity and excessive volume variation of TMPs during insertion/extraction of sodium ions result in a poor rate performance and long-term cycling stability, largely limiting their practical application. In this paper, NiP₂ nanoparticles encapsulated in three-dimensional graphene (NiP₂@rGO) were obtained from the flower-like spherical α-Ni(OH)₂ by phosphating and carbon encapsulation processes. When used as a sodium-ion batteries anode material, the NiP₂@rGO composite shows an excellent cycling performance (117 mA h g⁻¹ at 10 A g⁻¹ after 8000 cycles). The outstanding electrochemical performance of NiP₂@rGO is ascribed to the synergistic effect of the rGO and NiP₂. The rGO wrapped on the NiP₂ nanoparticles build a conductive way, improving ionic and electronic conductivity. The effective combination of NiP₂ nanoparticles with graphene greatly reduces the aggregation and pulverization of NiP₂ nanoparticles during the discharge/charge process. This study may shed light on the construction of high-performance anode materials for sodium-ion batteries and to other electrode materials.     

Superior Lithium‐Ion Storage Properties of Mesoporous CuO–Reduced Graphene Oxide Composite Powder Prepared by a Two‐Step Spray‐Drying Process

Mesoporous CuO–reduced graphene oxide (rGO) composite powders were prepared by using a two‐step spray‐drying process. In the first step, hollow CuO powders were prepared from a spray solution of copper nitrate trihydrate with citric acid and were wet milled to obtain a colloidal spray solution. In the second step, spray drying of the colloidal solution that contained dispersed GO nanosheets produced mesoporous CuO–rGO composite powders with particle sizes of several microns. Thermal reduction of GO nanosheets to rGO nanosheets occurred during post‐treatment at 300 °C. Initial discharge capacities of the hollow CuO, bare CuO aggregate, and CuO–rGO composite powders at a current density of 2 A g^?1 were 838, 1145, and 1238 mA h g^?1, respectively. Their discharge capacities after 200 cycles were 259, 380, and 676 mA h g^?1, respectively, and their corresponding capacity retentions measured from the second cycle were 67, 48, and 76 %, respectively. The mesoporous CuO–rGO composite powders have high structural stability and high conductivity because of the rGO nanosheets, and display good cycling and rate performances.     

Constructing 2D Sandwich-like MOF/MXene Heterostructures for Durable and Fast Aqueous Zinc-Ion Batteries

Two-dimensional metal–organic frameworks (2D MOFs) can be used as the cathodes for high-performance zinc-ion battery due to their large one-dimensional channels. However, the conventionally poor electrical conductivity and low structural stability hinder their advances. Herein, we report an alternately stacked MOF/MX heterostructure, exhibiting the 2D sandwich-like structure with abundant active sites, improved electrical conductivity and exceptional structural stability. Ex situ characterizations and theoretical calculations reveal a reversible intercalation mechanism of zinc ions and high electrical conductivity in the 2D heterostructure. Electrochemical tests confirm excellent Zn²⁺ migration kinetics and ideal pseudocapacitive behaviors. As a consequence, Cu-HHTP/MX shows a superior rate performance (260.1 mAh g⁻¹ at 0.1 A g⁻¹ and 173.1 mAh g⁻¹ at 4 A g⁻¹) and long-term cycling stability of 92.5 % capacity retention over 1000 cycles at 4 A g⁻¹.     

A Nanostructured Si/SiOC Composite Anode with Volume-Change-Buffering Microstructure for Lithium-Ion Batteries

Si/SiOC composites are promising high-capacity anode materials for lithium-ion batteries since the SiOC matrix can effectively buffer the volumetric change of Si during cycling. However, a structure of Si nanoparticles (NPs) enwrapped by a continuous SiOC phase typically shows poor cyclic stability and low charge/discharge rate due to structure failure of bulk SiOC shells derived from carbon-rich organosilicon. To address this issue, in this work, an Si/SiOC nanocomposite with volume-change-buffering microstructure, in which Si NPs are uniformly dispersed in a matrix of SiOC nanospheres, has been synthesized. Our results show that the space between Si and SiOC NPs can accommodate the large volume change of Si during cycling and facilitate infiltration of the electrolyte. The nanostructured SiOC skeleton serves as both a mechanically robust buffer to alleviate the intrinsic expansion of Si and an effective electron conductor. The Si/SiOC NP composite displays significantly increased capacity and cyclic stability compared with pure SiOC, and delivers reversible capacities of around 800 mA h⁻¹ g⁻¹ at a current density of 100 mA g⁻¹ (approximately 100 % capacity retention after 100 cycles) and around 600 mA h⁻¹ g⁻¹ at 500 mA g⁻¹ (capacity retention about 80 % after 500 cycles).     

中空分级结构Fe3O4@C/rGO复合材料的合成及其储锂性能

以氧化石墨烯(GO)为基底,Fe(NO_3)_3·9H_2O、异丙醇、甘油为原料,通过溶剂热法和后续热处理过程2步合成了Fe_3O_4@C/rGO复合材料,实现了碳包覆的Fe_3O_4纳米粒子自组装形成的分级结构空心球在氧化石墨烯片上的原位生长。采用X射线衍射(XRD)、扫描电镜(SEM)、透射电镜(TEM)和恒流充放电等手段分析了材料的物理化学性能与储锂性能。结果表明,该复合材料在5.0 A·g~(-1)的电流密度下,仍有437.7 mAh·g~(-1)的可逆容量,在1.0 A·g~(-1)下循环200圈后还有587.3 mAh·g~(-1)的放电比容量。这主要归因于还原态氧化石墨烯(rGO)对碳包覆Fe_3O_4分级空心球整体结构稳定性和导电性的提高。     

Facile Preparation and Lithium Storage Properties of TiO2@Graphene Composite Electrodes with Low Carbon Content

Over the past decade, TiO₂/graphene composites as electrodes for lithium ion batteries have attracted a great deal of attention for reasons of safety and environmental friendliness. However, most of the TiO₂/graphene electrodes have large graphene content (9–40 %), which is bound to increase the cost of the battery. Logically, reducing the amount of graphene is a necessary part to achieve a green battery. The synthesis of TiO₂ nanosheets under solvothermal conditions without additives is now demonstrated. Through mechanical mixing TiO₂ nanosheets with different amount of reduced graphene (rGO), a series of TiO₂@graphene composites was prepared with low graphene content (rGO content 1, 2, 3, and 5 wt %). When these composites were evaluated as anodes for lithium ion batteries, it was found that TiO₂+3 wt % rGO manifested excellent cycling stability and a high specific capacity (243.7 mAh g^?1 at 1 C; 1 C=167.5 mA g^?1), and demonstrated superior high‐rate discharge/charge capability at 20 C.     

Regulating Lithium Plating and Stripping by Using Vertically Aligned Graphene/CNT Channels Decorated with ZnO Particles

Lithium (Li) metal is regarded as the ultimate anode material for use in Li batteries due to its high theoretical capacity (3860 mA h g⁻¹). However, the Li dendrites that are generated during iterative Li plating/stripping cycles cause poor cycling stability and even present safety risks, and thus severely handicap the commercial utility of Li metal anodes. Herein, we describe a graphene and carbon nanotube (CNT)-based Li host material that features vertically aligned channels with attached ZnO particles (designated ZnO@G-CNT-C) and show that the material effectively regulates Li plating and stripping. ZnO@G-CNT-C is prepared from an aqueous suspension of Zn(OAc)₂, CNTs, and graphene oxide by using ice to template channel growth. ZnO@G-CNT-C was found to be mechanically robust and capable of guiding Li deposition on the inner walls of the channels without the formation of Li dendrites. When used as an electrode, the material exhibits relatively low polarization for Li plating, fast Li-ion diffusion, and high Coulombic efficiency, even over hundreds of Li plating/stripping cycles. Moreover, full cells prepared with ZnO@G-CNT-C as Li host and LiFePO₄ as cathode exhibit outstanding performance in terms of specific capacity (155.9 mA h g⁻¹ at 0.5 C), rate performance (91.8 mA h g⁻¹ at 4 C), cycling stability (109.4 mA h g⁻¹ at 0.5 C after 800 cycles). The methodology described can be readily adapted to enable the use of carbon-based electrodes with well-defined channels in a wide range of contemporary applications that pertain to energy storage and delivery.     

Transformation of Rusty Stainless-Steel Meshes into Stable,Low-Cost,and Binder-Free Cathodes for High-Performance Potassium-Ion Batteries

To recycle rusty stainless-steel meshes (RSSM) and meet the urgent requirement of developing high-performance cathodes for potassium-ion batteries (KIB), we demonstrate a new strategy to fabricate flexible binder-free KIB electrodes via transformation of the corrosion layer of RSSM into compact stack-layers of Prussian blue (PB) nanocubes (PB@SSM). When further coated with reduced graphite oxide (RGO) to enhance electric conductivity and structural stability, the low-cost, stable, and binder-free RGO@PB@SSM cathode exhibits excellent electrochemical performances for KIB, including high capacity (96.8 mAh g⁻¹), high discharge voltage (3.3 V), high rate capability (1000 mA g⁻¹; 42 % capacity retention), and outstanding cycle stability (305 cycles; 75.1 % capacity retention).     

Construction of Rich Conductive Pathways from Bottom to Top: A Highly Efficient Charge-Transfer System Used in Durable Li/Na-Ion Batteries at −20 °C

The construction of potential electrode materials with wide temperature property for high-energy-density secondary batteries has attracted great interest in recent years. Herein, a hybrid electrode, consisting of a nitrogen-doped carbon/α-MnS/flake graphite composite (α-MnS@N-C/FG), is prepared through a post-sulfurization route. In the α-MnS@N-C/FG composite, α-MnS nanoparticles wrapped by the N−C layer are uniformly embedded onto FG, forming a novel nanofoam structure. The as-obtained α-MnS@N-C/FG shows excellent lithium/sodium storage performance, with a specific capacity of 712 mA h g⁻¹ in the 700th cycle at 1.0 A g⁻¹ or 186.4 mA h g⁻¹ in the 100th cycle at 100 mA g⁻¹ using lithium or sodium foil as the counter electrode, respectively. Moreover, even operated at −20 °C, the α-MnS@N-C/FG can still attain a high specific capacity of 350 mA h g⁻¹ after 50 cycles at 100mA g⁻¹ for LIBs. This exceptional electrochemical response is attributed to the synergetic effect of the smart design of a hybrid nanofoam structure, in which the FG skeleton and N-C coating layer can significantly enhance the conductivity of the whole electrode from bottom to top. Accordingly, the enhanced redox kinetics endow the electrode with pseudocapacitive-dominated electrochemical behavior, leading to fast electrode reactions and robust structural stability in the whole electrode.     

Graphene/Amorphous Carbon Restriction Structure for Stable and Long-Lifespan Antimony Anode in Potassium-Ion Batteries

Sb-based materials have attracted much attention owing to their ability to undergo a multi-electron alloy reaction with K⁺. However, there are still the serious problems of volume change and aggregation of particles, which lead to rapid capacity fading and a limited lifespan. In this work, a graphene/amorphous carbon restriction structure is proposed, in which the amorphous carbon layer on the surface of Sb nanoparticles can protect the particles from pulverization, and the graphene can buffer the volume change of the material. In addition, the conductive network formed by the dual carbon structure effectively improves the rate performance of the material. Thus, the material delivers a high capacity of 550 mA h g⁻¹ at 100 mA g⁻¹, a rate capability of 370 mA h g⁻¹ at 2000 mA g⁻¹, and a long lifespan of 350 cycles without significant capacity fading. The dual carbon strategy proposed offers a reference for the design of high-performance anode materials.     

Transformation of Rusty Stainless‐Steel Meshes into Stable,Low‐Cost,and Binder‐Free Cathodes for High‐Performance Potassium‐Ion Batteries

To recycle rusty stainless‐steel meshes (RSSM) and meet the urgent requirement of developing high‐performance cathodes for potassium‐ion batteries (KIB), we demonstrate a new strategy to fabricate flexible binder‐free KIB electrodes via transformation of the corrosion layer of RSSM into compact stack‐layers of Prussian blue (PB) nanocubes (PB@SSM). When further coated with reduced graphite oxide (RGO) to enhance electric conductivity and structural stability, the low‐cost, stable, and binder‐free RGO@PB@SSM cathode exhibits excellent electrochemical performances for KIB, including high capacity (96.8 mAh g⁻¹), high discharge voltage (3.3 V), high rate capability (1000 mA g⁻¹; 42 % capacity retention), and outstanding cycle stability (305 cycles; 75.1 % capacity retention).     

Engineering Na−Mo−O/Graphene Oxide Composites with Enhanced Electrochemical Performance for Lithium Ion Batteries

Sodium molybdate (Na−Mo−O) wrapped by graphene oxide (GO) composites have been prepared via a simple in-situ precipitation method at room temperature. The composites are mainly constructed with one dimension (1D) ultra-long sodium molybdate nanorods, which are wrapped by the flexible GO. The introduction of GO is expected to not merely provide more active sites for lithium-ions storage, but also improve the charge transfer rate of the electrode. The testing electrochemical performances corroborated the standpoint: The Na−Mo−O/GO composites delivers specific capacities of 718 mAh g⁻¹ after 100 cycles at 100 mA g⁻¹, and 570 mAh g⁻¹ after 500 cycles at a high rate of 500 mA g⁻¹; for comparison, the bare Na−Mo−O nanorod shows a severe capacity decay, which deliver only 332 mAh g⁻¹ after 100 cycles at 100 mA g⁻¹. In view of the cost-efficient and less time-consuming in synthesis, and one-step preparation without further treatment, these Na−Mo−O nanorods/GO composites present potential and prospective anodes for LIBs.     

A New Anode for Lithium‐Ion Batteries Based on Single‐Walled Carbon Nanotubes and Graphene: Improved Performance through a Binary Network Design

Carbon nanomaterials, especially graphene and carbon nanotubes, are considered to be favorable alternatives to graphite‐based anodes in lithium‐ion batteries, owing to their high specific surface area, electrical conductivity, and excellent mechanical flexibility. However, the limited number of storage sites for lithium ions within the sp²‐carbon hexahedrons leads to the low storage capacity. Thus, rational structure design is essential for the preparation of high‐performance carbon‐based anode materials. Herein, we employed flexible single‐walled carbon nanotubes (SWCNTs) with ultrahigh electrical conductivity as a wrapper for 3D graphene foam (GF) by using a facile dip‐coating process to form a binary network structure. This structure, which offered high electrical conductivity, enlarged the electrode/electrolyte contact area, shortened the electron‐/ion‐transport pathways, and allowed for efficient utilization of the active material, which led to improved electrochemical performance. When used as an anode in lithium‐ion batteries, the SWCNT‐GF electrode delivered a specific capacity of 953 mA h g^?1 at a current density of 0.1 A g^?1 and a high reversible capacity of 606 mA h g^?1 after 1000 cycles, with a capacity retention of 90 % over 1000 cycles at 1 A g^?1 and 189 mA h g^?1 after 2200 cycles at 5 A g^?1.