Subcomponent Self‐Assembly of a 4 nm M4L6 Tetrahedron with ZnII Vertices and Perylene Bisimide Dye Edges

Formation of a tetrahedron with >4 nm perylene bisimide (PBI) dye edges and Zn^II vertices in a one‐pot 22 component self‐assembly reaction is reported. The luminescent polyhedron equilibrates to a Zn₂L₃ helicate and disassembles upon dilution. Insights into the subcomponent self‐assembly of extended PBI ligands help to refine design rules for constructing large photofunctional metallosupramolecular hosts.     

Unexpected Self‐Assembly of a Homochiral Metallosupramolecular M4L4 Catenane

Two enantiomerically pure 9,9′‐spirobifluorene‐based bis(pyridine) ligands 1 and 2 were prepared to study their self‐assembly behavior upon coordination to cis‐protected palladium(II) ions. Whereas the sterically more demanding ligand, 2 , gave rise to the expected dinuclear metallosupramolecular M₂L₂ rhombi, the sterically less demanding ligand, 1 , acts as a template to give rise to a homochiral metallosupramolecular M₄L₄ catenane.     

Solvent‐Free Ball‐Milling Subcomponent Synthesis of Metallosupramolecular Complexes

Subcomponent self‐assembly from components A , B , C , D , and Fe²⁺ under solvent‐free conditions by self‐sorting leads to the construction of three structurally different metallosupramolecular iron(II) complexes. Under carefully selected ball‐milling conditions, tetranuclear [Fe₄( AD ₂)₆]^4? 22‐component cage 1 , dinuclear [Fe₂( BD ₂)₃]^2? 11‐component helicate 2 , and 5‐component mononuclear [Fe( CD ₃)]²⁺ complex 3 were prepared simultaneously in a one‐pot reaction from 38 components. Through subcomponent substitution reaction by adding subcomponent B , the [Fe₄( AD ₂)₆]^4? cage converts quantitatively to the [Fe₂( BD ₂)₃]^2? helicate, which, in turn, upon addition of subcomponent C , transforms to [Fe( CD ₃)]²⁺, following the hierarchical preference based on the thermodynamic stability of the complexes.     

A Rotaxane‐like Cage‐in‐Ring Structural Motif for a Metallosupramolecular Pd6L12 Aggregate

A BODIPY‐based bis(3‐pyridyl) ligand undergoes self‐assembly upon coordination to tetravalent palladium(II) cations to form a Pd₆L₁₂ metallosupramolecular assembly with an unprecedented structural motif that resembles a rotaxane‐like cage‐in‐ring arrangement. In this assembly the ligand adopts two different conformations—a C‐shaped one to form a Pd₂L₄ cage which is located in the center of a Pd₄L₈ ring consisting of ligands in a W‐shaped conformation. This assembly is not mechanically interlocked in the sense of catenation but it is stabilized only by attractive π‐stacking between the peripheral BODIPY chromophores and the ligands’ skeleton as well as attractive van der Waals interactions between the long alkoxy chains. As a result, the co‐arrangement of the two components leads to a very efficient space filling. The overall structure can be described as a rotaxane‐like assembly with a metallosupramolecular cage forming the axle in a metallosupramolecular ring. This unique structural motif could be characterized via ESI mass spectrometry, NMR spectroscopy, and X‐ray crystallography.     

A Remarkable Solvent Effect on the Nuclearity of Neutral Titanium(IV)‐Based Helicate Assemblies

The spontaneous self‐assembly of a neutral circular trinuclear Ti^IV‐based helicate is described through the reaction of titanium(IV) isopropoxide with a rationally designed tetraphenolic ligand. The trimeric ring helicate was obtained after diffusion of n‐pentane into a solution with dichloromethane. The circular helicate has been characterized by using single‐crystal X‐ray diffraction study, ¹³C CP‐MAS NMR and ¹H NMR DOSY solution spectroscopic, and positive electrospray ionization mass‐spectrometric analysis. These analytical data were compared with those obtained from a previously reported double‐stranded helicate that crystallizes in toluene. The trimeric ring was unstable in a pure solution with dichloromethane and transformed into the double‐stranded helicate. Thermodynamic analysis by means of the PACHA software revealed that formation of the double‐stranded helicates was characterized by ΔH(toluene)=?30 kJ mol^?1 and ΔS(toluene)=+357 J K^?1 mol^?1, whereas these values were ΔH(CH₂Cl₂)=?75 kJ mol^?1 and ΔS(CH₂Cl₂)=?37 J K^?1 mol^?1 for the ring helicate. The transformation of the ring helicate into the double‐stranded helicate was a strongly endothermic process characterized by ΔH(CH₂Cl₂)=+127 kJ mol^?1 and ΔH(n‐pentane)=+644 kJ mol^?1 associated with a large positive entropy change ΔS=+1115 J K^?1?mol^?1. Consequently, the instability of the ring helicate in pure dichloromethane was attributed to the rather high dielectric constant and dipole moment of dichloromethane relative to n‐pentane. Suggestions for increasing the stability of the ring helicate are given.     

Reduction of substituted 1,10-phenanthrolines as a route to rigid chiral benzimidazolylidenes

Variously substituted 1,10-phenanthrolines are reduced to octahydrophenanthrolines in moderate to good yields with NaBH₃CN in acetic acid/methanol. The exact solvent composition is important to avoid the formation of tetrahydrophenanthrolines and N-alkylated byproducts, and to optimize the formation of octahydrophenanthrolines. Resolution of a racemic reduction product gives an enantiomerically pure C₂-symmetric diamine from which the corresponding rigid benzimidazolylidene is prepared, whereas reduction of chiral phenanthrolines derived from bicyclic ketones affords diastereomerically pure diamines, which may also be converted to benzimidazolylidenes.     

Diastereoselective Control of Tetraphenylethene Reactivity by Metal Template Self-Assembly

The reaction of 4,4′,4′′,4′′′-(ethene-1,1,2,2-tetrayl)tetraaniline with 2-pyridinecarboxaldehyde and iron(II) chloride resulted, after aqueous workup, in the diastereoselective formation of an [Fe₂L₃]⁴⁺ triple-stranded helicate structure, irrespective of the stoichiometry employed. The helicate structure was characterized in solution by multinuclear NMR spectroscopy, and in the solid state by single-crystal X-ray crystallography. The reaction of iron(II) tetrafluoroborate or iron(II) bistriflimide with the tetraaniline and 2-pyridinecarboxaldehyde allowed the formation of an [Fe₈L₆]¹⁶⁺ cube when the appropriate stoichiometry was used, but these structures were unstable with respect to hydrolysis. The pendant amine groups on the helicate can be functionalized by reaction with acid chlorides or anhydrides, and the resulting functionalized tetraphenylethene (TPE) units were isolated by the reaction of the helicate with tris(2-aminoethyl)amine. The emission properties of the TPE units were studied in THF/water mixtures, and they were found by dynamic light scattering to self-assemble into large (av. diameter 250 nm) structures.     

Stabilizing and Organizing Bi3Cu4 and Bi7Cu12 Nanoclusters in Two‐Dimensional Metal–Organic Networks

Multinuclear heterometallic nanoclusters with controllable stoichiometry and structure are anticipated to possess promising catalytic, magnetic, and optical properties. Heterometallic nanoclusters with precise stoichiometry of Bi₃Cu₄ and Bi₇Cu₁₂ can be stabilized in the scaffold of two‐dimensional metal–organic networks on a Cu(111) surface through on‐surface metallosupramolecular self‐assembly processes. The atomic structures of the nanoclusters were resolved using scanning tunneling microscopy and density functional theory calculations. The nanoclusters feature highly symmetric planar hexagonal shapes and core–shell charge modulation. The clusters are arranged as triangular lattices with a periodicity that can be tuned by choosing molecules of different size. This work shows that on‐surface metallosupramolecular self‐assembly creates unique possibilities for the design and synthesis of multinuclear heterometallic nanoclusters.     

Pentameric circular iron(II) double helicates and a molecular pentafoil knot

We report on the synthesis of 11 pentameric cyclic helicates formed by imine condensation of alkyl monoamines with a common bis(formylpyridine)bipyridyl-derived building block and iron(II) and chloride ions. The cyclic double-stranded helicates were characterized by NMR spectroscopy, mass spectrometry, and in the case of a 2,4-dimethoxybenzylamine-derived pentameric cyclic helicate, X-ray crystallography. The factors influencing the assembly process (reactant stoichiometry, concentration, solvent, nature and amount of anion) were studied in detail: the role of chloride in the assembly process appears not to be limited to that of a simple template, and larger circular helicates observed with related tris(bipyridine) ligands with different iron salts are not produced with the imine ligands. Using certain chiral amines, pentameric cyclic helices of single handedness could be isolated and the stereochemistry of the helix determined by circular dichroism. By employing a particular diamine, a closed-loop molecular pentafoil knot was prepared. The pentafoil knot was characterized by NMR spectroscopy, mass spectrometry, and X-ray crystallography, confirming the topology and providing insights into the reasons for its formation.     

An enantioselective total synthesis of pinnaic acid

An enantioselective and convergent total synthesis of marine natural product pinnaic acid has been achieved. Our general synthetic approach is featured with an asymmetric hydrogenation of racemic γ-keto ester 3, a diastereoselective methylation on the α-methylene of the (1R,5R)-lactone 4, and a diastereoselective Michael addition of the tertiary nitro cyclopentane. The central azaspiro[4.5]decane was constructed utilizing reductive cyclization of the δ-nitroketone followed by highly stereoselective reduction of the cyclic imine with NaBH₄. Ultimately, successive use of triethyl-2-phosphonopropionate and Heathcock's phosphorane 18 to elaborate C5 and C13 side chains completed the total synthesis of pinnaic acid.     

In Situ Photoisomerization of an Azobenzene-Based Triple Helicate with a Prolonged Thermal Relaxation Time

The phosphate-coordination triple helicates A₂L₃ (A=anion) with azobenzene-spaced bis-bis(urea) ligands (L) have proven to undergo a rare in situ photoisomerization (without disassembly of the structure) rather than the typically known, stepwise “disassembly-isomerization-reassembly” process. This is enabled by the structural self-adaptability of the “aniono” assembly arising from multiple relatively weak and flexible hydrogen bonds between the phosphate anion and bis(urea) units. Notably, the Z→E thermal relaxation rate of the isomerized azobenzene unit is significantly decreased (up to 20-fold) for the triple helicates compared to the free ligands. Moreover, the binding of chiral guest cations inside the cavity of the Z-isomerized triple helicate can induce optically pure diastereomers, thus demonstrating a new strategy for making light-activated chiroptical materials.     

Cation‐Controlled Formation and Interconversion of the fac/fac and mer/mer Stereoisomers of a Triple‐Stranded Helicate

Two biscatecholester ligands with oligoether spacers were used to prepare dinuclear titanium(IV) triscatecholate based helicates. In the case of Li₄[( 1 / 2 )₃Ti₂], “classical” helicates with three internally bound Li⁺ ions and syn‐oriented ligands in the complex units (fac/fac isomer) were obtained. In the case of the sodium salt Na₄[( 2 )₃Ti₂], a different homochiral dinuclear triple‐stranded helicate with two internally bound Na⁺ ions was formed. The complex units are anti‐configured, and two of the ligand spacers are connecting internal with external positions of the helicate (mer/mer isomer). Removal of the sodium ions and addition of lithium ions leads to the switching from one topology to the other with an expanded helicate [( 2 )₃Ti₂]^4? as an intermediate. Switching back to the “non‐classical” helicate cannot be observed because severe structural rearrangements would be required.     

An Efficient Total Synthesis of Carbocyclic 2′-Deoxyribonucleosides

The present work describes a new and efficient method for the preparation of either racemic or enantiomerically pure carbocyclic 2′-deoxyribonucleosides 1 . Key steps are the efficient assembly of the racemic carbocyclic 2′-deoxyribose core (±)- 12 , its enzymatic resolution, and a new approach to covalently link the purine and pyrimidine bases with the cyclopentane moiety via the cyclic sulfate (+)- 19 . This total synthesis of enantiomerically pure and racemic carbocyclic 2′-deoxyribonucleosides 1 represents one of the most efficient approaches reported to date. Starting from cyclopentadiene, the four carbocycles corresponding to the naturally occurring 2′-deoxyribonucleosides could be prepared in 12 steps and 9–12% overall yield. For the corresponding racemic compounds, 10 steps were used with overall yields between 22 and 30%.     

8,14,30,36‐Tetramethoxy[2.0.2.0](1,6)naphthalenophane‐1,19‐diyne: A Double‐Helically Twisted Cyclophane by Diastereoselective Dimerization

The title compound and its corresponding etheno‐ and ethano‐bridged compounds were successfully synthesized in enantiomerically pure form by McMurry coupling of 2,2′‐dimethoxy‐(R)‐ or ‐(S)‐1,1′‐binaphthyl‐6,6′‐dicarbaldehydes as the key reaction. The reaction proceeded in a highly diastereoselective manner; the reaction of the racemic dialdehyde did not afford the meso coupling product but gave only the racemic one in poor yield. The diyne crystallized in the chiral monoclinic space group P2₁ from toluene/hexane. Structural analysis reveals that it has a considerably twisted double‐helical structure in crystal form. The spectral properties (NMR, UV/Vis, and CD) clearly indicate the highly strained nature of the molecule. In particular, its UV/Vis and CD spectra exhibit a bathochromic shift of about 20 nm for the naphthyl π–π* transitions.     

Diastereoselective addition of organozinc reagents to 2-alkyl-3-(arylsulfanyl)propanals

The preparation of compounds incorporating the 3-hydroxy-2-methyl-1-alkyl moiety of high diastereomeric purity is described. Such compounds can serve as potential building blocks for the preparation of several kinds of natural products. Diastereoselective synthesis of two potential pine sawfly pheromone components, one the pure racemic threo-isomer of 3-methylpentadecan-2-ol and the other the racemic erythro-isomer of 3-methyltridecan-2-ol are described. The diastereoselective addition of R₂Zn (R=Me, Et and n-Bu) to several 2-alkyl-3-(arylsulfanyl)propanals in the presence of a Lewis acid and CH₂Cl₂ as solvent was studied. An excellent diastereomeric ratio (95/5 anti-Cram/Cram) was obtained with 2-[(phenylsulfanyl)methyl]pentanal, 2-[(phenylsulfanyl)methyl]decanal and 2-[(phenylsulfanyl)methyl]dodecanal and Me₂Zn in the presence of TiCl₄.     

Triphenylethanediol-Derived 2-Chloro-1,3,2- dioxaphospholane: Synthesis,Structure, and Reaction with Chiral Alcohols

The reaction of (S)-1,1,2-triphenylethanediol (3) with phosphorus trichloride leads to the diastereoselective formation of (S _C,R _P)-2-chloro-1,3,2-dioxaphospholane (2). Its configuration has been determined by single crystal X-ray diffraction. When reacted with racemic secondary alcohols, diastereomeric phosphites are obtained, which display substantial shift differences in the ³¹P NMR spectra. Thus, chlorodioxaphospholane 2 can serve as derivatizing reagent for chiral secondary alcohols permitting to determine their enantiomeric excess.     

Aza[6]helicene Platinum Complexes: Chirality Control of cis–trans Isomerism

It was serendipitously observed that cis‐[PtCl₂(NCEt)PPh₃] reacted differently with either racemic or enantiopure 4‐aza[6]helicene, giving respectively cis (racemic) and trans (enantiopure) [Pt^IICl₂(4‐aza[6]helicene)PPh₃] complexes. This unexpected reactivity is explained through a dynamic process (crystallization‐induced diastereoselective transformation) and enables a new aspect of reactivity in chiral transition‐metal complexes to be addressed.     

Conformationally rigid chiral ferrocene derivative: Synthesis,resolution and stereochemical assignment

A conformationally rigid chiral molecule LB-I with Lewis basic site has been designed and synthesized in racemic form from ferrocene via Lewis acid mediated diastereoselective cyclization of hydroxy lactam. Both isomers were successfully obtained in enantiomerically pure form through classical resolution using dibenzoyl-d-tartaric acid as the chiral resolving agent in acetone. The nature of the diastereomeric salt formed in the resolution process was investigated by single crystal X-ray crystallographic studies. The absolute configuration of (+)-LB-I was unambiguously assigned as (S,R_p) by single crystal analysis of the salt I obtained from precipitate fraction containing (+)-LB-I and dibenzoyl-d-tartaric acid.     

Modulation of a Supramolecular Figure-of-Eight Strip Based on a Photoswitchable Stiff-Stilbene

The preparation, assembly and dynamic properties of photoswitchable bisphosphine ligands based on the stiff-stilbene scaffold are reported. Directional bonding and coordination-induced assembly allow complexation of these ligands with palladium(II), resulting in the formation of discrete metallo-supramolecular entities. While the Z isomer forms a simple bidentate metallo-macrocycle, an intricate double helicate figure-of-eight dimer is observed with the E ligand. Topologically 3D complexes can thus be obtained from 2D ligands. Upon irradiation with UV light, isomerization of the ligands allows control of the architecture of the formed complexes, resulting in a light-triggered modulation of the supramolecular topology. Furthermore, a mechanistic investigation unveiled the dynamic nature of the helicate chirality, where a transmission of motion from the palladium centers yields an „eight-to-eight“ inversion.     

Self-assembly of a nucleotide-calixarene hybrid in a triangular supramolecule

The self-assembly of a thymine nucleotide-calixarene hybrid (1) in CDCl₃ as a solvent was investigated. FT-IR, ESI-MS, ¹H and DOSY-NMR spectra evidenced that compound 1 (ammonium or sodium salt) self-assembles in a triangular trimeric supramolecule by thymine-thymine hydrogen bonding. The saline form is crucial for the arrangement in the cyclic trimer as the protonation of the nucleotide phosphate groups leads the assembly toward a dimeric species.