Formal Co(0), Fe(0), and Mn(0) complexes with NHC and styrene ligation

The limited knowledge on low-coordinate zero-valent transition-metal species has intrigued great synthetic efforts in developing ligand sets for their stabilization. While the combined ligand set of N-heterocyclic carbene (NHC) with vinylsilanes was the only known ligand system amenable to the stabilization of three-coordinate formal zero-valent cobalt, iron, and manganese complexes, the exploration on other ligands has proved that the ligand set of NHCs with styrene is equally effective in stabilizing three-coordinate formal zero-valent metal complexes in the form of (NHC)M(η²-CH₂CHPh)₂ (NHC = IPr, IMes; M = Co, Fe, Mn). These styrene complexes can be prepared by the one-pot reactions of MCl₂ with styrene, NHC and KC₈, and have been characterized by various spectroscopic methods. Preliminary reactivity study indicated that the interaction of [(IMes)Fe(η²-CH₂CHPh)₂] with DippN₃ produces the iron(IV) bisimido complex [(IMes)Fe(NDipp)₂] and styrene, which hints at the utility of these zero-valent metal styene complexes as synthons of the mono-coordinate species (NHC)M(0).     

N‐Heterocyclic Carbene–Ytterbium Amide as a Recyclable Homogeneous Precatalyst for Hydrophosphination of Alkenes and Alkynes

The N‐heterocyclic carbene–ytterbium(II) amides (NHC)₂Yb[N(SiMe₃)₂]₂ ( 1 : NHC: 1,3,4,5‐tetramethylimidazo‐2‐ylidene (IMe₄); 2 : NHC: 1,3‐diisopropyl‐4,5‐dimethylimidazol‐2‐ylidene (IiPr)) and the NHC‐stabilized rare‐earth phosphide (IMe₄)₃Yb(PPh₂)₂ ( 3 ) have been synthesized and fully characterized. Complexes 1 – 3 are active precatalysts for the hydrophosphination of alkenes, alkynes, and dienes and exhibited much superior catalytic activity to that of the NHC‐free amide (THF)₂Yb[N(SiMe)₂]₂. Complex 1 is the most active precursor among the three complexes. In particular, complex 1 can be recycled and recovered from the reaction media after the catalytic reactions. Furthermore, it was found that complex 3 could catalyze the polymerization of styrene to yield atactic polystyrenes with low molecular weights. To the best of our knowledge, complex 1 represents the first rare‐earth complex that can be recovered after catalytic reactions.     

Highly Active,Chemo‐ and Regioselective YbII and SmII Catalysts for the Hydrophosphination of Styrene with Phenylphosphine

Stable heteroleptic amido Yb^II and Sm^II complexes bearing aminoether–phenolate ligands and devoid of coordinated solvent have been structurally characterized. They afford highly active, chemoselective and, in the case of monoadditions, 100 % anti‐Markovnikov regiospecific catalysts (down to 0.04 mol % loading) for the hydrophosphination of styrene with PhPH₂ under mild conditions.     

Heteroleptic Alkyl and Amide Iminoanilide Alkaline Earth and Divalent Rare Earth Complexes for the Catalysis of Hydrophosphination and (Cyclo)Hydroamination Reactions

[{N^N}M(X)(thf)_n] alkyl (X=CH(SiMe₃)₂) and amide (X=N(SiMe₃)₂) complexes of alkaline earths (M=Ca, Sr, Ba) and divalent rare earths (Yb^II and Eu^II) bearing an iminoanilide ligand ({N^N}^?) are presented. Remarkably, these complexes proved to be kinetically stable in solution. X‐ray diffraction studies allowed us to establish size–structure trends. Except for one case of oxidation with [{N^N}Yb^II{N(SiMe₃)₂}(thf)], all these complexes are stable under the catalytic conditions and constitute effective precatalysts for the cyclohydroamination of terminal aminoalkenes and the intermolecular hydroamination and intermolecular hydrophosphination of activated alkenes. Metals with equal sizes across alkaline earth and rare earth families display almost identical apparent catalytic activity and selectivity. Hydrocarbyl complexes are much better catalyst precursors than their amido analogues. In the case of cyclohydroamination, the apparent activity decreases with metal size: Ca>Sr>Ba, and the kinetic rate law agrees with R_CHA=k[precatalyst]¹[aminoalkene]¹. The intermolecular hydroamination and hydrophosphination of styrene are anti‐Markovnikov regiospecific. In both cases, the apparent activity increases with the ionic radius (Ca<Sr<Ba) but the rate laws are different, and obey R_HA=k[styrene]¹[amine]¹[precatalyst]¹ and R_HP=k[styrene]¹[HPPh₂]⁰[precatalyst]¹, respectively. Mechanisms compatible with the rate laws and kinetic isotopic effects are proposed. [{N^N}Ba{N(SiMe₃)₂}(thf)₂] ( 3 ) and [{N^N}Ba{CH(SiMe₃)₂}(thf)₂] ( 10 ) are the first efficient Ba‐based precatalysts for intermolecular hydroamination and hydrophosphination, and display activity values that are above those reported so far. The potential of the precatalysts for C? N and C? P bond formation is detailed and a rare cyclohydroamination–intermolecular hydroamination “domino” sequence is presented.     

Synthesis,Structure and Reactivity of PH‐Phosphoraneiminato‐ and Iminophosphoraneiminato Group 4 Transition‐Metal Complexes

The versatile coordination chemistry of the well‐investigated phosphoraneiminato‐ligand R₃PN^— ( I ) was extended by the successive introduction of protons to the phosphorus atom. The position of the resulting equilibrium between the NH‐phosphanylamido‐ [R₂P‐NH^—] and the PH‐phosphoraneiminato‐form [R₂HP=N^—] is affected by the Lewis acidity of the coordinated metal fragment. Experimental studies on complexes with various substitution patterns at the group 4 metal center R₂HP=N[M] ( II ) were unambiguously confirmed by DFT‐calculations. The isolation of group 4 PH‐dihydrido‐phosphoraneiminato‐complexes RH₂P‐N[M] ( III ) is prevented by the low thermodynamic stability of the target molecules, also supported by the results of ab initio calculations. However, an access to the by then unknown transition‐metal substituted iminophosphanes RP=N[M] ( IV ) was verified for the first time. Within extensive studies on the coordination chemistry of bis(imino)phosphoranes RP(=NR′)(=NR″), several species of group 4 complexes R(R′N=)P=N[M] ( V ) were isolated and structurally characterized. In this case, investigations on the NH/PH‐tautomerism were performed exclusively on theoretical level, because the required educts are experimentally non‐accessible due to their kinetic instability.     

Alkyl scandium complexes coordinated by dianionic O,N,N- and O,N,O-ligands derived from Schiff bases

The reactions of imino phenols 3,5-Bu^t₂-2-HOC₆H₂CH=NX (X = 8-C₉H₆N, 2-MeO-5-MeC₆H₃ and 2-PhOC₆H₄) with Sc(CH₂SiMe₃)₃(THF)₂ in toluene proceed with silane elimination and reductive alkylation of the CN group affording dimeric base-free monoalkyl scandium complexes. X-ray analysis of the two complexes revealed their dimeric structures due to μ-bridging amidophenolato dianions. The complexes catalyze hydrophosphination of styrene, phenylacetylene and tolane with Ph₂PH as well as dehydrogenative coupling of anisole with hydrosilanes.     

Synthesis and Coordination Ability of a Donor-Stabilised Bis-Phosphinidene

Chelating phosphines have long been a mainstay as efficient directing ligands in transition-metal catalysis. Low-valent derivatives, namely chelating phosphinidenes, are to date unknown, and could lead to chelating complexes containing more than one metal centre due to the intrisic capacity of phosphinidenes to bind two metal fragments at one P-centre. Here we describe the synthesis of the first such chelating bis-phosphinidene ligand, XantP₂ ( 2 ), generated by the reduction of a diphosphino xanthene derivative, Xant(PH₂)₂ ( 1 ) with ^iPrNHC (^iPrNHC=[:C{N(iPr)C(H)}₂]). Initial studies have shown that this novel chelating ligand can act as a bidentate ligand towards element dihalides (i.e. FeCl₂, ZnI₂, GeCl₂, SnBr₂), forming cationic complexes with the tetryl elements. In contrast, XantP₂ demonstrates an ability to bind multiple metal centres in the reaction with CuCl, leading to a cationic Cu₃P₃ ring complex, with Cu centres bridged by phosphinidene arms. Density Functional Theory calculations show that 2 indeed holds 4 lone pairs of electrons, shedding further light on the coordination capacity for this novel ligand class through observation of directionality and hybridisation of these electron pairs.     

Ge2H2 a π-ligand in organometallic chemistry

η² π-Complexes of Ge₂H₂ with the organometallic fragments V(PH₃)₂(I)(CO)₂, Cr(CO)₄, Co(PH₃)₂(Cl) and M(PH₃)₂ (M = Ni, Pd, Pt) have been studied at the B3LYP level using the SBKJC relativistic effective core potentials and their associated basis sets on metals and iodine, and the 6-31G(d) basis set on all other elements. The transition metal fragments of V, Cr, Co, Ni, Pd and Pt were chosen based on known alkyne compounds. All the complexes are local minima for both the HGeGeH and GeGeH₂ isomers of the Ge₂H₂ ligand. The complexes containing GeGeH₂ isomer as a ligand are lower in energy than those with the HGeGeH ligand (except in the V complex in which the difference is only 1.0 kcal/mol). There is a net charge transfer from ligand to metal in complexes V-Co and from metal to ligand in late transition metal complexes (Ni-Pt).     

Triptycene‐Based Chiral and meso‐N‐Heterocyclic Carbene Ligands and Metal Complexes

Based on 1‐amino‐4‐hydroxy‐triptycene, new saturated and unsaturated triptycene‐NHC (N‐heterocyclic carbene) ligands were synthesized from glyoxal‐derived diimines. The respective carbenes were converted into metal complexes [(NHC)MX] (M=Cu, Ag, Au; X=Cl, Br) and [(NHC)MCl(cod)] (M=Rh, Ir; cod=1,5‐cyclooctadiene) in good yields. The new azolium salts and metal complexes suffer from limited solubility in common organic solvents. Consequently, the introduction of solubilizing groups (such as 2‐ethylhexyl or 1‐hexyl by O‐alkylation) is essential to render the complexes soluble. The triptycene unit infers special steric properties onto the metal complexes that enable the steric shielding of selected areas close to the metal center. Next, chiral and meso‐triptycene based N‐heterocyclic carbene ligands were prepared. The key step in the synthesis of the chiral ligand is the Buchwald–Hartwig amination of 1‐bromo‐4‐butoxy‐triptycene with (1S,2S)‐1,2‐diphenyl‐1,2‐diaminoethane, followed by cyclization to the azolinium salt with HC(OEt)₃. The analogous reaction with meso‐1,2‐diphenyl‐1,2‐diaminoethane provides the respective meso‐azolinium salt. Both the chiral and meso‐azolinium salts were converted into metal complexes including [(NHC)AuCl], [(NHC)RhCl(cod)], [(NHC)IrCl(cod)], and [(NHC)PdCl(allyl)]. An in situ prepared chiral copper complex was tested in the enantioselective borylation of α,β‐unsaturated esters and found to give an excellent enantiomeric ratio (er close to 90:10).     

An Air‐Stable Heterobimetallic Si2M2 Tetrahedral Cluster

Air‐ and moisture‐stable heterobimetallic tetrahedral clusters [Cp(CO)₂MSiR]₂ (M=Mo or W; R=SitBu₃) were isolated from the reaction of N‐heterocyclic carbene (NHC) stabilized silyl(silylidene) metal complexes Cp(CO)₂M=Si(SitBu₃)NHC with a mild Lewis acid (BPh₃). Alternatively, treatment of the NHC‐stabilized silylidene complex Cp(CO)₂W=Si(SitBu₃)NHC with stronger Lewis acids such as AlCl₃ or B(C₆F₅)₃ resulted in the reversible coordination of the Lewis acid to one of the carbonyl ligands. Computational investigations revealed that the dimerization of the intermediate metal silylidyne (M≡Si) complex to a tetrahedral cluster instead of a planar four‐membered ring is due to steric bulk.     

New tripodal N-heterocyclic carbene chelators for small molecule activation

In an effort to develop new tripodal N-heterocyclic carbene (NHC) ligands for small molecule activation, two new classes of tripodal NHC ligands TIME^R and TIMEN^R have been synthesized. The carbon-anchored tris(carbene) ligand system TIME^R (R = Me, t-Bu) forms bi- or polynuclear metal complexes. While the methyl derivative exclusively forms trinuclear 3:2 complexes [(TIME^Me)₂M₃]³⁺ with group 11 metal ions, the tert-butyl derivative yields a dinuclear 2:2 complex [(TIME^t-Bu)₂Cu₂]²⁺ with copper(I). The latter complex shows both “normal” and “abnormal” carbene binding modes and accordingly, is best formulated as a bis(carbene)alkenyl complex. The nitrogen-anchored tris(carbene) ligands TIMEN^R (R = alkyl, aryl) bind to a variety of first-row transition metal ions in 1:1 stoichiometry, affording monomeric complexes with a protected reactivity cavity at the coordinated metal center. Complexes of TIMEN^R with Cu(I)/(II), Ni(0)/(I), and Co(I)/(II)/(III) have been synthesized. The cobalt(I) complexes with the aryl-substituted TIMEN^R (R = mesityl, xylyl) ligands show great potential for small molecule activation. These complexes activate for instance dioxygen to form cobalt(III) peroxo complexes that, upon reaction with electrophilic organic substrates, transfer an oxygen atom. The cobalt(I) complexes are also precursors for terminal cobalt(III) imido complexes. These imido complexes were found to undergo unprecedented intra-molecular imido insertion reactions to form cobalt(II) imine species. The molecular and electronic structures of some representative metal NHC complexes as well as the nature of the metal–carbene bond of these metal NHC complexes was elucidated by X-ray and DFT computational methods and are discussed briefly. In contrast to the common assumption that NHCs are pure σ-donors, our studies revealed non-negligible and even significant π-backbonding in electron-rich metal NHC complexes.     

An Air-Stable Heterobimetallic Si2M2 Tetrahedral Cluster

Air- and moisture-stable heterobimetallic tetrahedral clusters [Cp(CO)₂MSiR]₂ (M=Mo or W; R=SitBu₃) were isolated from the reaction of N-heterocyclic carbene (NHC) stabilized silyl(silylidene) metal complexes Cp(CO)₂M=Si(SitBu₃)NHC with a mild Lewis acid (BPh₃). Alternatively, treatment of the NHC-stabilized silylidene complex Cp(CO)₂W=Si(SitBu₃)NHC with stronger Lewis acids such as AlCl₃ or B(C₆F₅)₃ resulted in the reversible coordination of the Lewis acid to one of the carbonyl ligands. Computational investigations revealed that the dimerization of the intermediate metal silylidyne (M≡Si) complex to a tetrahedral cluster instead of a planar four-membered ring is due to steric bulk.     

Quinobis(imidazolylidene): Synthesis and Study of an Electron‐Configurable Bis(N‐Heterocyclic Carbene) and Its Bimetallic Complexes

Reaction of bromanil with N,N′‐dimesitylformamidine followed by deprotonation with NaN(SiMe₃)₂ afforded 1,1′,3,3′‐tetramesitylquinobis(imidazolylidene) ( 1 ), a bis(N‐heterocyclic carbene) (NHC) with two NHC moieties connected by a redox active p‐quinone residue, in 72 % yield of isolated compound. Bimetallic complexes of 1 were prepared by coupling to FcN₃ ( 2 ) or FcNCS ( 3 ; Fc=ferrocenyl) or coordination to [M(cod)Cl] ( 4 a or 4 b , where M=Rh or Ir, respectively; cod=1,5‐cyclooctadiene). Treatment of 4 a and 4 b with excess CO(g) afforded the corresponding [M(CO)₂Cl] complexes 5 a and 5 b , respectively. Analysis of 2 – 5 by NMR spectroscopy and X‐ray diffraction indicated that the electron‐deficient quinone did not significantly affect the inherent spectral properties or coordination chemistry of the flanking imidazolylidene units, as compared to analogous NHCs. Infrared spectroscopy and cyclic voltammetry revealed that decreasing the electron density at ML_n afforded an increase in the stretching energy and a decrease in the reduction potential of the quinone, indicative of metal–quinone electronic interaction. Differential pulse voltammetry and chronoamperometry of the metal‐centered oxidations in 2 – 4 revealed two single, one‐electron peaks. Thus, the metal atoms bound to 1 are oxidized at indistinguishable potentials and do not appear electronically coupled. However, the metal–quinone interaction was used to increase the electron density at coordinated metal atoms. Infrared spectroelectrochemistry revealed that the average ν_CO values for 5 a and 5 b decreased by 14 and 15 cm^?1, respectively, upon reduction of the quinone embedded within 1 . These shifts correspond to 10 and 12 cm^?1 decreases in the Tolman electronic parameter of this ditopic ligand.     

Synthesis and Reactivity of Molybdenum and Tungsten Alkyne Complexes Containing 6-Methylpyridine-2-thiolate Ligands

A series of M(II) and M(IV) (M=Mo, W) alkyne adducts employing two 6-methylpyridine-2-thiolate (6-MePyS) ligands was synthesized and investigated towards the nucleophilic attack of PMe₃ on the coordinated alkynes. For this approach, 2-butyne (C₂Me₂), phenylacetylene (HC₂Ph), and diphenylacetylene (C₂Ph₂) were used. For the exploration of an intramolecular attack, but-3-yn-1-ol (HCCCH₂CH₂OH) was coordinated to the metal centers. A nucleophilic attack of PMe₃ was observed in [W(CO)(HC₂Ph)(6-MePyS)₂] yielding an η²-vinyl compound. Reaction of [W(CO)(C₂Ph₂)(6-MePyS)₂] with excess PMe₃ resulted in the selective coordination of one molecule of PMe₃ concomitant with decoordination of the nitrogen atom of one 6-MePyS ligand. In contrast, the W(IV) complexes did not react with PMe₃. While no selectivity was observed in the reaction of the Mo(II) compounds with PMe₃, alkynes in the Mo(IV) compounds were replaced by PMe₃. Addition of Et₃N to the but-3-yn-1-ol complexes did not lead to the anticipated formation of 2,3-dihydrofuran.     

Contrasting electronic requirements for CH binding and CH activation in d6 half‐sandwich complexes of rhenium and tungsten

A computational study of the interaction half‐sandwich metal fragments (metal = Re/W, electron count = d⁶), containing linear nitrosyl (NO⁺), carbon monoxide (CO), trifluorophosphine (PF₃), N‐heterocyclic carbene (NHC) ligands with alkanes are conducted using density functional theory employing the hybrid meta‐GGA functional (M06). Electron deficiency on the metal increases with the ligand in the order NHC < CO < PF₃ < NO⁺. Electron‐withdrawing ligands like NO⁺ lead to more stable alkane complexes than NHC, a strong electron donor. Energy decomposition analysis shows that stabilization is due to orbital interaction involving charge transfer from the alkane to the metal. Reactivity and dynamics of the alkane fragment are facilitated by electron donors on the metal. These results match most of the experimental results known for CO and PF₃ complexes. The study suggests activation of alkane in metal complexes to be facile with strong donor ligands like NHC. © 2015 Wiley Periodicals, Inc.     

Nickel‐Triad Complexes of a Side‐on Coordinating Distannene

NHC adducts of the stannylene Trip₂Sn (Trip=2,4,6‐triisopropylphenyl) were reacted with zero‐valent Ni, Pd, and Pt precursor complexes to cleanly yield the respective metal complexes featuring a three‐membered ring moiety Sn‐Sn‐M along with carbene transfer onto the metal and complete substitution of the starting ligands. Thus the easily accessible NHC adducts to stannylenes are shown to be valuable precursors for transition‐metal complexes with an unexpected Sn? Sn bond. The complexes have been studied by X‐ray diffraction and NMR spectroscopy as well as DFT calculations. The compounds featuring the structural motif of a distannametallacycle comprised of a [(NHC)₂M⁰] fragment and Sn₂Trip₄ represent rare higher congeners of the well‐known olefin complexes. DFT calculations indicate the presence of a π‐type Sn–Sn interaction in these first examples for acyclic distannenes symmetrically coordinating to a zero‐valent transition metal.     

Thermolysis of Noble Metal Nanoparticles into Electron‐Rich Phosphorus‐Coordinated Noble Metal Single Atoms at Low Temperature

Noble metal single atoms coordinated with highly electronegative atoms, especially N and O, often suffer from an electron‐deficient state or poor stability, greatly limiting their wide application in the field of catalysis. Herein we demonstrate a new PH₃‐promoted strategy for the effective transformation of noble metal nanoparticles (MNPs, M=Ru, Rh, Pd) at a low temperature (400 °C) into a class of thermally stabilized phosphorus‐coordinated metal single atoms (MPSAs) on g‐C₃N₄ nanosheets via the strong Lewis acid–base interaction between PH₃ and the noble metal. Experimental work along with theoretical simulations confirm that the obtained Pd single atoms supported on g‐C₃N₄ nanosheets exist in the form of PdP₂ with a novel electron‐rich feature, conceptionally different from the well‐known single atoms with an electron‐deficient state. As a result of this new electronic property, PdP₂‐loaded g‐C₃N₄ nanosheets exhibit 4 times higher photocatalytic H₂ production activity than the state‐of‐art N‐coordinated PdSAs supported on g‐C₃N₄ nanosheets. This enhanced photocatalytic activity of phosphorus‐coordinated metal single atoms with an electron‐rich state was quite general, and also observed for other active noble metal single atom catalysts, such as Ru and Rh.     

Porphyrins Fused to N‐Heterocyclic Carbenes (NHCs): Modulation of the Electronic and Catalytic Properties of NHCs by the Central Metal of the Porphyrin

We report herein a detailed study of the use of porphyrins fused to imidazolium salts as precursors of N‐heterocyclic carbene ligands 1 M . Rhodium(I) complexes 6 M – 9 M were prepared by using 1 M ligands with different metal cations in the inner core of the porphyrin (M=Ni^II, Zn^II, Mn^III, Al^III, 2H). The electronic properties of the corresponding N‐heterocyclic carbene ligands were investigated by monitoring the spectroscopic changes occurring in the cod and CO ancillary ligands of [( 1 M )Rh(cod)Cl] and [( 1 M )Rh(CO)₂Cl] complexes (cod=1,5‐cyclooctadiene). Porphyrin–NHC ligands 1 M with a trivalent metal cation such as Mn^III and Al^III are overall poorer electron donors than porphyrin–NHC ligands with no metal cation or incorporating a divalent metal cation such as Ni^II and Zn^II. Imidazolium salts 3 M (M=Ni, Zn, Mn, 2H) have also been used as NHC precursors to catalyze the ring‐opening polymerization of L ‐lactide. The results clearly show that the inner metal of the porphyrin has an important effect on the reactivity of the outer carbene.     

Synthetic and structural studies of NHC–Pt(dvtms) complexes and their application as alkene hydrosilylation catalysts (NHC = N-heterocyclic carbene,dvtms = divinyltetramethylsiloxane)

The synthesis and structural characterization of a series of platinum complexes, bearing N-heterocyclic carbenes (NHC) and divinyltetramethylsiloxane (dvtms) as supporting ligands, are described. The reaction of commercially available Karstedt’s catalyst (Pt₂{(η²-ViSiMe₂)₂O}₃) with in situ generated NHC leads to monomeric platinum(0) complexes in which one NHC is bound to the metal center, as indicated by spectroscopic analysis and single-crystal X-ray diffraction studies. The relative reactivity trend for these complexes as catalysts for the hydrosilylation of alkenes is discussed in terms of NHC ligand steric properties.     

d6 metal systems for white phosphorus activation

This short review describes a breakthrough provided by the synthesis of d⁶ metal complexes containing the intact molecules P₄ and P₄S₃. The coordinated cage molecules acquire unexpected reactivity and undergo dismutation reactions in mild conditions in the presence of water. The outcomings are obtained either in form of free or coordinated molecules; the former are hypophosphorous and phosphorous acids, the latter comprise, besides phosphine, PH₃, such species as thiophosphinous acid, PH₂SH, diphosphane, P₂H₄, 1-hydroxytriphosphane, PH(OH)PHPH₂ and 1,1,4-tris-hydroxytetraphosphane, P(OH)₂PHPHPH(OH), which are either unknown or extremely reactive as free molecules. The formation of the above molecules provides a clue to the hydrolytic activation of the P₄ and P₄S₃ cage molecules.