基于纳米金/壳聚糖/石墨烯的癌胚抗原阻抗型免疫传感器

研究了在PBS缓冲介质中,一种检测癌胚抗原的新型免标记阻抗型免疫传感器的制备及应用,基于石墨烯、纳米金在玻碳电极表面组装制备传感器,通过循环伏安法、交流阻抗法对制备的传感器进行表征。在优化的实验条件下,该免疫传感器的阻抗值随着检测溶液中癌胚抗原(CEA)浓度的增大而增大,并在0.1～85 ng/mL CEA范围内呈线性关系,回归方程为△Ret=1605.55+39.26ρ;检测限为0.04 ng/mL(R=0.9992)。该免疫传感器可用于临床上对CEA的检测。     

亲和型生物传感器在生物医学上的应用进展

近年来,生物传感器与纳米技术、流动注射和微流控等新技术的结合,获得了蓬勃而迅速的发展。 亲和型生物传感器是基于生物分子之间的特异的亲和性,即生物活性物质对底物的亲和与键合而建立起来的一种新型传感装置。 它具有特异性好、灵敏度高、成本低、能在复杂的体系中进行在线连续监测等优点,进而在生物医学领域,对生物医学标记物、核酸、蛋白质、病毒、细菌及毒素的检测、药物作用机理的研究、临床用药筛选等方面有着广泛的应用。 本文从光学、电化学、石英晶体微天平传感、表面等离子体共振等几个方面对近年来亲和型生物传感器,特别是用于检测肿瘤标记物的免疫传感器和基于核酸适体的生物传感器在生物医学领域的测定原理和应用现状进行了评述,并对其发展趋势进行了展望。     

用于高灵敏检测人肠道病毒71型的纳米金电化学免疫传感器

在玻碳电极表面滴加纳米金,通过纳米金(AuNPs)的生物相容性以固定人肠道病毒71型(EV71)抗体从而制备EV71电化学免疫传感器,该电化学免疫传感器可灵敏检测EV71。在pH 7.0的含有0.1mol·L-1氯化钾和5mmol·L-1 K3Fe(CN)6/K4Fe(CN)6的磷酸盐缓冲溶液中,通过循环伏安法考察了该免疫传感器的分析性能。当EV71的质量浓度在0.1~80μg·L-1范围内时,氧化还原探针[Fe(CN6)]3-/4-的氧化峰电流随EV71质量浓度的增大呈线性降低,检出限(3S/N)为0.025μg·L-1。对20μg·L-1的EV71抗原标准溶液测定5次,测定值的相对标准偏差为3.0%。以空白样品为基体进行加标回收试验,所得回收率在98.3%~100%之间。     

亚甲基蓝为介体的甲胎蛋白免疫传感器的研制及应用

构建了快速测定血清中甲胎蛋白(AFP)含量的电流型免疫传感器,该免疫传感器是用壳聚糖固定电子媒介体亚甲基蓝和辣根过氧化物酶(HRP)标记的甲胎蛋白抗体于一次性丝网印刷碳电极(SPCE)表面制备而成。当该免疫传感器在含AFP样品的溶液中于30℃培育40 min后,抗原抗体的免疫结合会导致HRP标记对过氧化氢电催化氧化的效率降低。在优化的测定条件下,催化效率的降低与AFP浓度在5.0~110.0μg.L-1范围内呈线性关系,免疫分析的检出限为1.4μg.L-1(3σ)。对免疫传感器的精密度作了试验,同一支传感器测试结果的相对标准偏差为6.6%;当取3支用同一方法制备的传感器进行测试时,相对标准偏差为9.3%。放置7d后,传感器对AFP的响应值相当于初试值的88%,在pH 7.0的缓冲溶液中的还原电流为原值的96%。     

电化学生物传感器测定甲胎蛋白的研究进展

人体血清中甲胎蛋白(AFP)含量已作为肝癌检测的重要指标,快速而准确地检测血清中的AFP含量对肝癌的早期诊断和预后都有极为重要的作用。传统的酶联免疫法存在分析时间长、前处理繁琐等不利因素。利用免疫技术与电化学检测技术结合起来的电化学免疫传感器,由于具有操作简单、灵敏度高、特异性强及成本低等特点,而得到广泛关注。本文将根据所采用的不同检测方式及修饰材料等方面对近年来电化学免疫传感器检测AFP的研究与应用进行评述,并对其发展趋势进行了展望。     

苝二酰亚胺衍生物-聚苯胺-氮化碳非标记型C-反应蛋白免疫传感器的研制

本文以苝二酰亚胺衍生物(PDI)-聚苯胺(PANI)-氮化碳(C_3N_4)复合材料为电化学活性物质和基底材料构建了一种非标记型免疫传感器用于C反应蛋白(CRP)的定量检测。首先,将带有氨基的PDI与PANI结合,然后,加入羧基化的C_3N_4形成复合材料PDI-PANI-C_3N_4,提高了材料的导电性。本文所构建的免疫传感器采用差分脉冲伏安法(DPV)于PBS(pH 7.4)中定量检测CRP,无需在溶液中加入其他电活性物质。当CRP抗体和抗原在电极表面特异性结合后,能够阻碍电流的传导,其响应电流会随着结合的CRP抗原的量增多而降低,由此实现CRP实时快速的检测。本实验对CRP抗体浓度、培育时间对免疫传感器的影响进行探究,在最优检测条件下,CRP抗原浓度与响应电流呈线性关系,线性范围为5～200 ng·mL~(-1),检测下限为1.66 ng·mL~(-1)。同时,该免疫传感器在面对多种干扰物时,具有良好的抗干扰能力。     

基于HGB/PTh/AuNCs无标记癌胚抗原免疫传感器的研究

本文研制了一种基于中空石墨烯球(HGB)/聚硫堇/金纳米笼的无标记型癌胚抗原传感器。将合成的中空石墨烯球修饰于玻碳电极(GCE)表面,在其上电聚合硫堇形成多孔聚硫堇(PTh)复合膜后吸附固定金纳米笼,然后将癌胚抗体(anti-CEA)固定到电极表面,制得无标记型癌胚抗原(CEA)免疫传感器。当抗体与抗原发生免疫反应时,形成的复合物阻碍了电子传递,从而降低聚硫堇的电催化活性。通过示差脉冲伏安法(DPV)检测聚硫堇的响应电流信号的降低,实现对CEA的无标记检测。在最优的实验条件下,检测癌胚抗原的线性范围为0.5~80 ng·mL-1,线性相关系数为0.9932,检测限为0.17 ng·mL-1。该免疫传感器可用于临床上CEA的检测。在血清样品中进行了CEA的检测,结果令人满意。     

基于石墨烯和金纳米笼修饰的无标记型微囊藻毒素免疫传感器的研制

利用石墨烯及中空结构的金纳米笼构建了无标记型电化学免疫传感器,并用于微囊藻毒素的检测。利用多元醇还原法合成制备了导电性好、催化性强、生物相容性好的金纳米笼;再利用高分散的石墨烯将其固定于玻碳电极表面,进一步吸附固定微囊藻毒素抗体。在无微囊藻毒素存在时,电化学探针[Fe(CN)6]3!/4!在传感器界面上能获得较高的电流响应信号。当培育了微囊藻毒素后,抗体与微囊藻毒素形成免疫结合物,增加了电极表面的电荷密度和传质阻力,阻碍[Fe(CN)6]3!/4!扩散到电极表面,导致[Fe(CN)6]3!/4!的电流响应信号明显降低,电流减小的程度间接地与微囊藻毒素的浓度成比例,可实现对微囊藻毒素的检测。实验考察了抗原培育时间,抗体浓度等条件对该传感器响应性能的影响。结果表明,此传感器对微囊藻毒素的线性响应范围为0.05~1000μg/L,检出限为0.017μg/L,优于文献报道。此传感器操作简单,并且具有良好的稳定性,将其用于实际水样中微囊藻毒素的检测,平均加标回收率为94.1%。     

量子点偶联抗体型夹心免疫传感法检测心肌肌钙蛋白I

将纳米量子点(QD)的放大作用与夹心免疫传感技术相结合, 首次应用量子点标记抗体和表面等离子体共振生物传感器(SPR)对心肌肌钙蛋白I(cTn I)进行特异性定量检测. 利用N-羟基琥珀酰(NHS)和1-乙基-3-(3-二甲氨基丙基)碳二亚胺盐酸盐(EDC)将量子点偶联到cTn I的单克隆抗体2F11上, 再利用SDS-聚丙烯酰胺凝胶电泳(SDS-PAGE)验证偶联是否成功, 膜印迹法证明标记后的2F11具有良好的生物学和免疫学活性, 最后以蛋白A为基底膜、特异性抗心肌肌钙蛋白I多克隆抗体为第一抗体(捕捉抗体)、QD标记的抗心肌肌钙蛋白I单克隆抗体2F11为第二抗体(检测抗体), 用表面等离子体共振生物传感器构建了对心肌肌钙蛋白I具有特异性的夹心免疫传感法, 并成功用于检测心肌肌钙蛋白I. 本法的检测范围为0.4~15 μg/L, 检出限为0.4 μg/L, 较未标记夹心法和直接法分别提高了约2倍和10倍.     

金属有机框架材料在电化学/电化学发光免疫分析中的应用（英文）

设计和研制具有超灵敏、高精度、选择性好的免疫传感器对于疾病的早期诊断和筛查以及疾病治疗过程的监测具有十分重要的意义。其中,电化学免疫分析法和电化学发光(ECL)免疫分析法,由于具有稳定性好、灵敏度高、线性范围宽、可控性好等优点而备受关注,已成为当前的研究热点之一。金属有机框架(MOFs)作为一类新型的多孔晶体材料,由于其具有比表面积大、化学稳定性好、孔径和纳米级骨架结构可调节等优点,在电化学和ECL免疫传感器的制备中得到了广泛的应用。MOFs不仅可以作为固定生物识别分子的敏感平台,还可以用于富集痕量分析物和信号分子来放大分析信号,提高电化学或ECL免疫分析的灵敏度。目前,科研人员已合成各种各样具有不同性能和形貌的MOFs纳米材料,并用于开发高性能的电化学免疫传感器和ECL免疫传感器。本文综述了不同类型的基于MOFs纳米材料的电化学/ECL免疫传感器的制备及其在免疫分析中的检测应用。研究表明,MOFs不仅可以作为电极表面修饰的基底、信号探针(包括电活性标记分子和电化学发光发光标记探针)、催化活性标记物,还可以作为负载各种生物分子、纳米材料的载体,最终可用于灵敏的电化学和ECL检测。此外,...     

Amperometric Immunosensor for the Determination of 2′,3′-dideoxyinosine

Abstract

An amperometric immunosensor, based on carbon paste impregnated with solubilized antidideoxyinosine (from rabbit lyophilized powder, whole antiserum) has been constructed for the assay of anti-HIV agent dideoxyinosine (didanosine, DDI). The amperometric immunosensor was reliably used for dideoxyinosine assay in the 900 pmol/L to 9 nmol/L concentration range, with a detection limit of 180 pmol/L, at E = +1.04 V vs. Ag/AgCl. The construction of the immunosensor is reproducible. Its surface can be easily renewed by simple polishing on an aluminium paper. The new amperometric immunosensor is reliable for the assay of 2′,3′-dideoxyinosine in raw material as well as in its pharmaceutical formulation (Videx tablets).     

Immunosensor for the determination of azidothymidine: its utilization as detector in a sequential injection analysis system

An amperometric immunosensor based on graphite paste (graphite powder and paraffin oil) has been constructed for the assay of azidothymidine (AZT). The graphite paste is impregnated with anti-AZT. The immunosensor can be reliably used for the assay of AZT in its pharmaceutical formulation. The potential used for AZT assay was 435 mV vs Ag/AgCl electrode. The surface of the immunosensor can be regenerated by simply polishing, obtaining fresh immunocomposite ready to be used in a new assay. Due to its reliability, the immunosensor was successfully used as a detector in a sequential injection analysis system, and gave reliable results for on-line assay of AZT purity in raw material and AZT contents in pharmaceutical formulations.     

Chronoamperometry Measurement for Rapid Cucumber Mosaic Virus Detection in Plants

Cucumber mosaic virus (CMV) causes major losses to agricultural and horticultural crops around the world. Hence, a rapid assay for the detection of CMV which can be employed in both laboratory and field is essential. A portable electrochemical immunosensor system for the detection of CMV, based on immobilized CMV specific antibodies conjugated with gold nanoparticle was developed for this purpose. The conjugated antibodies were added with polymer and deposited onto carbon screen printed working electrodes. Optimization of the modified surface immunosensor was performed using sandwich immunoassay format (ELISA). The initial ELISA result for the standard curve development showed a limit of detection down to 0.1mg/mL. Subsequently, the immunosensor was tested for cross reactivity with other plant pathogens. The performance of the electrochemical immunosensor revealed that it has a high selectivity in sample matrix with other organism. This immunosensor provides a promising technology for simple and sensitive detection system that is essential in rapid detection of plant pathogens.     

Heparin‐gold Nanoparticles and Liquid Crystal Applied in Label‐free Electrochemical Immunosensor for Prostate‐specific Antigen

A label‐free electrochemical immunosensor based on the liquid crystal (E)‐1‐decyl‐4‐[(4‐decyloxyphenyl)diazenyl]pyridinium bromide (Br−Py), together with heparin‐stabilized gold nanoparticles (AuNP‐Hep) and Nafion is proposed for the determination of prostate‐specific antigen (PSA). The Br−Py liquid crystal presented redox properties and good film‐forming abilities on the electrode surface, and thus it is a suitable alternative as a redox probe for a label‐free electrochemical immunosensor, which could simplify the analysis methodology. The stepwise construction of the immunosensor and the incubation process (immunocomplex formation) were characterized by voltammetry and electrochemical impedance spectroscopy. The proposed immunosensor could directly detect PSA concentrations in the incubation samples, based on the suppression of the Br−Py redox peak (‘base peak’) current. After optimization, the immunosensor exhibited a linear response to PSA concentrations in the range of 0.1 to 50 ng mL⁻¹, with a calculated detection limit of 0.08 ng mL⁻¹. The reproducibility (coefficient of variance less than 3.0 %), selectivity and accuracy of the methodology were adequate. The immunosensor was satisfactorily applied in the quantification of PSA in human blood plasma samples.     

双重信号放大的竞争型免疫传感器的制备及其应用于瘦肉精检测的研究

制备了葡萄糖氧化酶(GOD)-克伦特罗(Clenbuterol, CB)功能纳米复合物, 并采用共价键合和温育组装等方法构建了双重信号放大的竞争型免疫传感器. 研究了GOD 催化氧化葡萄糖和普鲁士蓝(PB)催化还原H2O2 双重信号放大的反应机理和传感器检测CB 的作用机制. 用扫描电子显微镜(SEM)等方法表征了纳米复合材料的形貌和复合物中GOD的活性, 复合物中的GOD 保持了良好的电催化性能和酶动力学响应, 并且符合米氏动力学方程. 最佳实验条件下, 该免疫传感器对盐酸克伦特罗的检测线性范围为0.01～100 ng/mL, 检测限达4.50 pg/mL. 实验结果表明, 该传感器对瘦肉精克伦特罗的检测具有灵敏度高, 特异性强, 重现性好, 线性范围宽和检测限低等优点. 将该方法用于猪肝样品的分析, 加标样品回收率在97.5%～102%之间. 该研究为瘦肉精及β-受体兴奋剂的分析提供了一种新方法.     

基于双层纳米金修饰的高灵敏电位型乙肝表面抗原免疫传感器研究

基于电沉积和层层自组装技术，提出了一种新的生物分子固定化方法，研制成一种高灵敏电位型乙肝表面抗原免疫传感器。利用L-半胱胺酸（LCys）的双官能团结合双层纳米金，从而通过比表面积大，生物相容性好的纳米金胶吸附大量抗体，同时用聚乙烯醇缩丁醛（PVB）薄膜的笼效应把乙肝表面抗体（HBsAb）和纳米金固定在玻碳电极上，从而制得了高灵敏度、高稳定性的电位型免疫传感器。采用循环伏安法（CV）对电极的层层自组装过程进行了考察，并对该免疫传感器的性能进行了详细的研究。该免疫传感器线性范围是8．5～256．0ng／mL，线性相关系数为0．9978，灵敏度为89．0，检出限为3．1ng／mL。已用于病人的血清样品分析。     

石墨烯复合材料电化学免疫传感器在肿瘤标志物检测中的应用

监测肿瘤标志物水平变化是评估肿瘤治疗效果的重要方法.基于石墨烯复合材料构建的电化学免疫传感器可实现对肿瘤标志物的检测,检测灵敏度高、特异性好,是快速、准确分析肿瘤标志物含量的理想检测工具.本文重点阐述了石墨烯复合材料的电化学免疫传感器在肿瘤标志物检测中的应用进展.总结了其在肿瘤标志物检测中应用的优势和不足,最后对基于石...     

A novel electrochemical immunosensor based on colabeled silica nanoparticles for determination of total prostate specific antigen in human serum

A novel electrochemical immunosensor using functionalized silica nanoparticles (Si NPs) as protein tracer has been developed for the detection of prostate specific antigen (PSA) in human serum. The immunosensor was carried out based on a heterogeneous sandwich procedure. The PSA capture antibody was immobilized on the gold electrode via glutaraldehyde crosslink. After reaction with the antigen in human serum, Si NPs colabeled with detection antibody and alkaline phosphatase (ALP) was sandwiched to form the immunocomplex on the gold electrode. ALP carried by Si NPs convert nonelectroactive substrate into the reducing agent and the latter, in turn, reduce metal ions to form electroactive metallic product on the electrode. Linear sweep voltammetry (LSV) was used to quantify the amount of the deposited silver and give the analytical signal for PSA. The parameters including the concentration of the ALP used to functionalize the Si NPs and the enzyme catalytic reaction time have been studied in detail and optimized. Under the optimum conditions of immunoreaction and electrochemical detection, the electrochemical immunosensor was able to realize a reliable determination of PSA in the range of 1–35 ng/mL with a detection limit of 0.76 ng/mL. For six human serum samples, the results performed with the electrochemical immunosensor were in good agreement with those obtained by chemiluminescent microparticle immunoassay (CMIA), indicating that the electrochemical immunosensor could satisfy the need of practical sample detection.     

压电胰岛素-C肽微阵列免疫传感器研究

以AT切型、基频10MHz的镀金膜石英晶体作为换能器,将抗人胰岛素和C肽单克隆抗体固定在石英晶体电极表面,用2×5检测池固定夹具构建一种新型压电胰岛素-C肽微阵列免疫传感器.研究了抗体固定方法、抗体工作浓度、固定量、一致性以及传感器的响应参数如检测温度、时间和特异性等的影响.该微阵列传感器在胰岛素浓度为2.5～160.0mIU/L、C肽浓度为0.375～12.0ng/mL范围内响应特性良好,压电晶体频率偏移值与胰岛素和C肽浓度呈良好的线性关系.将此微阵列传感器用于人血清标本的测定,结果与放射免疫法符合(r为0.92和0.94).此微阵列传感器具有灵敏度高、特异性好,低密度阵列结构,检测通量较高,不需标记,操作简单、能实时在线检测和重复使用等优点,能用于临床实验诊断,具有临床推广应用价值.     

基于纳米材料的免疫传感器研究进展

本文根据纳米材料的分类,分别对近三年来零维、一维、二维纳米材料,以及多种纳米材料共修饰的免疫传感器研究进展进行了系统介绍,并展望了其研究和应用前景.