Preparation and applications of novel fluoroalkyl end‐capped oligomers/polyimide/silica nanocomposites

Fluoroalkyl end‐capped acrylic acid, N,N‐dimethylacrylamide, N‐(1,1‐dimethyl‐3‐oxobutyl)acrylamide and vinyltrimethoxysilane oligomers reacted with polyamic acid possessing trimethoxysilyl groups under alkaline conditions to yield the corresponding fluoroalkyl end‐capped oligomers/polyamic acid/silica nanocomposites. These isolated fluorinated composite powders were found to afford nanometer size‐controlled fine particles with a good dispersibility and stability in water and traditional organic solvents. We succeeded in preparing new fluoroalkyl end‐capped oligomers/polyimide/silica nanocomposites by the imidization of fluorinated polyamic acid silica nanocomposites through the stepwise heating at 110 and 270°C under air atmosphere conditions. These fluorinated polyimide/silica nanocomposites thus obtained were applied to the surface modification of glass and poly(methyl methacrylate) (PMMA) to exhibit good hydro‐ and oleo‐phobic characteristics imparted by fluoroalkyl groups in the composites on their surface. In addition, the surface morphology of the modified glass treated with these fluorinated nanocomposites were analyzed by using FE‐SEM and DFM. Copyright © 2011 John Wiley & Sons, Ltd.     

Thermal stability and UV-shielding properties of polymethyl methacrylate and polystyrene modified with calcium carbonate nanoparticles

The influences of nanosized CaCO₃ on the thermal and optical properties embedded in poly(methyl methacrylate) (PMMA) and polystyrene (PS) were investigated. Calcium carbonate nanoparticles were synthesized by in situ deposition technique, and its nano size (32–35 nm) was confirmed by scanning electron microscope (SEM) and X-ray studies. Nanocomposites samples of PMMA/CaCO₃ and PS/CaCO₃ were prepared with different filler loading (0–4 wt%) of CaCO₃ nanoparticles by solution mixing technique. The Fourier transform infrared analysis confirmed that CaCO₃ nanoparticles were present in the polymers matrices. The morphology and elemental composition of nanocomposites were evaluated by SEM and energy dispersive X-ray spectroscopy. The thermal properties of nanocomposites were characterized by differential scanning calorimetric, thermogravimetric, and differential thermogravimetry analysis, and the results indicate that the incorporation of CaCO₃ nanoparticles could significantly improve the thermal properties of PMMA/CaCO₃ and PS/CaCO₃ nanocomposites. The glass transition temperature (T _g ) and decomposition temperature (T _d ) of nanocomposites with 4 wt% of CaCO₃ nanoparticles were increased by 30 and 24 K in case of PMMA/CaCO₃ and 32  and 15 K in the case of PS/CaCO₃ nanocomposites, respectively. The obtained transparent nanocomposites films were characterized using UV–Vis spectrophotometer which shows the transparencies of nanocomposites are almost maintained in visible region while the intensity of absorption band in ultraviolet (UV) region is increased with CaCO₃ nanoparticles contents and these composites particles could enhance the UV-shielding properties of polymers.     

Preparation of Al(OH)3/PMMA nanocomposites by emulsion polymerization

Al(OH)₃/PMMA nanocomposites were prepared by the emulsion polymerization of methyl methacrylate (MMA) in the presence of surface‐functionalized Al(OH)₃ particles. Nanosized Al(OH)₃ particles were previously functionalized with a silane coupling agent, 3‐(trimethoxysilyl) propyl methacrylate (γ‐MPS), which was confirmed by FT‐IR and XRF analysis. The average size of seed particles was around 70 nm, and the density of the coupling agent on the particles was calculated to be 8.9 µmol m^?2. The emulsion polymerization was attempted at relatively high solid content of 40–46 wt%. The ratio of the seed particles to MMA had a strong influence on the stability of latex as well as the morphology of composites. Nanocomposites where several PMMA nodules were attached on the surface of Al(OH)₃ core were produced with stable latex emulsion when the weight percents of Al(OH)₃ to MMA were below 20. In the case of higher ratio of 30%, however, the latexes became unstable with an aggregation, and the product morphology was in the shape of large composite. Thermogravimetric analysis showed an improved thermal stability of PMMA composites with the incorporation of Al(OH)₃ nanoparticles. Copyright © 2008 John Wiley & Sons, Ltd.     

Effects of incorporation of modified silica nanoparticles on the mechanical and thermal properties of PMMA

Silica nanoparticles of various sizes have been incorporated by melt compounding in a poly(methyl methacrylate) (PMMA) matrix to enhance its thermal and mechanical properties. In order to improve nanoparticles dispersion, PMMA grafted particles have been prepared by atom transfer radical polymerization (ATRP) from well-defined silica nanoparticles. This strategy was expected to ensure compatibility between both components of the PMMA nanocomposites. TEM analysis have been performed to evaluate the nanosilica dispersion whereas modified and non-modified silica/PMMA nanocomposites thermal stability and mechanical properties have been investigated by both thermogravimetric and dynamical mechanical analysis.     

Preparation of raspberry-like PMMA/SiO2 nanocomposite particles

Water-borne raspberry-like PMMA/SiO₂ nanocom-posite particles were prepared via free radical copolymerization of methyl methacrylate (MMA) with 1-vinylimidazole (1-VID) in the presence of ultrafine aqueous silica sols. The acid-base interaction between hydroxyl groups (acidic) of silica surfaces and amino groups (basic) of 1-VID was strong enough for promoting the formation of long-standing stable PMMA/SiO₂ nanocomposite particles when 10 mol% or more 1-VID as auxiliary monomer was used. The average particle sizes and the silica contents of the nanocomposite particles were in the ranges from 120–330 nm and 15%–20%, respectively. TEM and SEM observations indicated a raspberry-like morphology of the obtained nanocomposite particles. __________ Translated from Chemical Journal of Chinese Universities, 2005, 26(7) (in Chinese)     

Surface modification of silica nanoparticles by UV-induced graft polymerization of methyl methacrylate

In this study we modified the surface of silica nanoparticles with methyl methacrylate by UV-induced graft polymerization. It is a surface-initiated polymerization reaction induced by ultraviolet irradiation. The resulting organic-inorganic nanocomposites were near-monodisperse and fabricated without homopolymerization of the monomer. Substantial increase in mean particle size was observed by SEM image analysis after UV-induced grafting of methyl methacrylate onto pure silica particles. FT-Raman spectroscopy and X-ray photoelectron spectroscopy studies of these materials revealed the successful grafting of methyl methacrylate onto the silica surface. The formation of a covalent bond between the grafted PMMA chains and silica surface was indicated by FT-Raman spectra. Thermogravimetric analysis of the PMMA-grafted silica particles indicated the polymer contents in good agreement with SEM photographs.     

ENHANCED MECHANICAL PROPERTIES OF POLYPROPYLENE/SILICA NANOCOMPOSITES WITH SURFACE MODIFICATION OF NANO-SILICA VIA IN SITU COPOLYMERIZATION OF METHYL METHACRYLATE AND BUTYL ACRYLATE

Nano-sized silica particles were modified with methacryloxy-propyltrimethoxysilane(MPS) followed by in situ copolymerization of methyl methacrylate(MMA) and butyl acrylate(BA).These modified nanoparticles were compounded with polypropylene(PP) to prepare PP/silica nanocomposites.PMMA grafted on nano-silica enhances the dispersion of the nanoparticles and interfacial adhesion,decreases the size of PP spherulites in nanocomposites and leads to increasing the Young's modulus and toughness of PP/silica nanoc...     

The catalytic role of oxide in the thermooxidative degradation of poly(methyl methacrylate)-TiO2 nanocomposites

The influence of TiO₂ nanoparticles on the thermal degradation of poly(methyl methacrylate) (PMMA) was investigated by TGA. The studied materials were characterized by Py-GC-MS, TEM, SEM, TGA, DSC and TGA-MS. The PMMA-TiO₂ nanocomposites were prepared by melt blending with different (5, 10, 15 and 20 wt% TiO₂) loadings. According to TGA results and to the activation energy (determined by the model-free isoconversional method of Vyazovkin), the incorporation of 5 wt% of TiO₂ nanoparticles into PMMA stabilizes it by more than 40 °C. However, for higher loading contents, a catalytic effect on the thermal decomposition was observed which increased with the oxide content. The results obtained by Py-GC-MS showed clearly that TiO₂ increases the formation of methanol, methacrylic acid and propanoic acid methyl ester during the degradation of PMMA. This catalytic effect could be explained through the interaction of the methoxy group of the methacrylate function with the hydroxyl groups present at the surface of the oxide particles.     

Effect of nanoparticles on the thermal stability of PMMA nanocomposites prepared by in situ bulk polymerization

Al₂O₃ and ZnO filled poly(methyl methacrylate) nanocomposites were synthesized by free radical (bulk) polymerization. Efficient dispersion was achieved by predispersing the nanoparticles in propylene glycol methyl ether acetate (PGMEA) followed by ultrasonication of nanoparticles into the PMMA syrup. Thermal analysis confirms chemisorption between PGMEA and metal oxide particles. The addition of nanoparticle affects degradation mechanism and consequently improves thermal stability of PMMA. The reduction of polymer chain mobility and the tendency of nanoparticles to eliminate free radicals are the principal effects responsible for these enhancements.     

Synthesis and characterization of poly(methylmethacrylate)/silica nanocomposites: Study of the interphase by solid‐state NMR and structure/properties relationships

Organic/inorganic nanocomposites were synthesized from poly(methylmethacrylate) (PMMA) and properly modified silica nanoparticles by in situ polymerization. Methacryloylpropyltrimethoxysilane was selected as nanoparticle surface modifier because it is characterized by unsaturated end groups available to radical reactions, making possible to suppose their participation in the acrylic monomer polymerization. As a result of the above hypothesized reactions, a phase constituted by polyacrylic chains grafted onto modified silica surface was isolated. ²⁹Si and ¹³C solid‐state nuclear magnetic resonance experiments permitted to analyze this phase in terms of composition and chain mobility as well as to highlight interaction mechanisms occurring between growing PMMA oligoradicals and functional groups onto silica surface. It was demonstrated that this PMMA grafted onto silica surface acts as an effective coupling agent and assures a good dispersion of nanoparticles as well as a strong nanoparticle/matrix interfacial adhesion. As a result of strong interactions occurring between phases, a significant increase of the glass transition temperature was recorded. Finally, the abrasion resistance of PMMA in the hybrids was significantly improved as a result of a different abrasion propagation mechanism induced by silica particles thus overcoming one of the most serious PMMA drawback. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

In situ radical polymerization of methyl methacrylate in a solution of surface modified TiO2 and nanoparticles

Surface modified TiO₂ nanoparticles dissolved in toluene were encapsulated in PMMA by in situ radical polymerization of methyl methacrylate initiated by 2,2′-azobisisobutyronitrile. The surface modification of the TiO₂ nanoparticles (average diameter of 4.5 nm) was achieved by the formation of a charge transfer complex between TiO₂ nanoparticles and 6-palmitate ascorbic acid. The surface modified TiO₂/nanoparticles were characterized using UV−Vis and FTIR spectroscopy, while the obtained polymer nanocomposites were characterized using reflection and ¹H NMR spectroscopy, as well as gel permeation chromatography. The influence of the TiO₂ nanoparticles on the thermal properties of the PMMA matrix was investigated using thermo-gravimetric analysis and differential scanning calorimetry. The glass transition temperature of the polymer was not influenced by the presence of the nanoparticles while the thermal stability was significantly improved.     

One‐Pot Fabrication of Supramolecular Polymer Particles via Situ Polymerization Stringed Assembly of a Two‐Monomer Microemulsion

Summary: A novel method, situ polymerization stringed assembly (SPSA), is proposed to prepare stable solid or hollow supramolecular polymer particles, which are assembled by numerous nanoparticles. By this method, the fabrication of primary nanoparticles (poly(methyl methacrylate), PMMA), the linkers (polyvinylpyrrolidone, PVP, chains) between the nanoparticles, and the final assembled solid or hollow particles could be achieved in just one‐pot by methyl methacrylate (MMA)/N‐vinylpyrrolidone (NVP) microemulsion polymerization under UV irradiation. The structures of the supramolecular particles can be changed from solid to hollow by tuning the mass ratio of MMA/NVP in the microemulsion. AFM, TEM, and SEM experiments are performed to identify the results.

AFM image of the PMMA/PVP solid particles obtained from the photopolymerization of the microemulsion containing 20 wt.‐% MMA, 10 wt.‐% NVP, and 5 × 10⁻² wt.‐% BP.     

PMMA/graphite nanosheets composite and its conducting properties

Graphite nanosheets (NanoG) were prepared by treating the expanded graphite with sonication in aqueous alcohol solution. Nanocomposites of poly(methyl methacrylate) (PMMA) with NanoG were prepared via an in situ polymerization of MMA in the presence of NanoG with the aid of sonication. The nanocomposites were then dispersed with chloroform (CHCl₃) and casted on glass slides to form conducting films. The percolation threshold of PMMA/NanoG conducting films at room temperature was as low as 0.31 vol%, much lower than that of the composites filled with conventional graphite particles. Scanning electron microscopy (SEM), transmission electron microscopy (TEM), selected area diffraction (SAD) and etc. were used to characterize the structure of the graphite nanosheets and the nanocomposites. Results showed that the high-aspect-ratio structure of graphite nanosheets played an important role in forming conducting network in PMMA matrix. The conducting behavior of the composite was interpreted by percolation theory.     

Synthesis of core/shell structure of glycidyl–functionalized poly(methyl methacrylate) latex nanoparticles via differential microemulsion polymerization

The differential microemulsion polymerization technique was used to synthesize the nanoparticles of glycidyl-functionalized poly(methyl methacrylate) or PMMA via a two-step process, by which the amount of sodium dodecyl sulfate (SDS) surfactant required was 1/217 of the monomer amount by weight and the surfactant/water ratio could be as low as 1/600. These surfactant levels are extremely low in comparison with those used in a conventional microemulsion polymerization system. The glycidyl-functionalized PMMA nanoparticles are composed of nanosized cores of high molecular weight PMMA and nano-thin shells of the random copolymer poly[(methyl methacrylate)-ran-(glycidyl methacrylate)]. The particle sizes were about 50 nm. The ratios of the glycidyl methacrylate in the glycidyl-functionalized PMMA were achieved at about 5–26 wt.%, depending on the reaction conditions. The molecular weight of glycidyl-functionalized PMMA was in the range of about 1 × 10⁶ to 3 × 10⁶ g mol⁻¹. The solid content of glycidyl-functionalized PMMA increased when the amount of added glycidyl methacrylate was increased. The glycidyl-functionalized polymer on the surface of nano-seed PMMA nanoparticles was a random copolymer which was confirmed by ¹H-NMR spectroscopy. The amounts of functionalization were investigated by the titration of the glycidyl functional group. The structure of the glycidyl-functionalized PMMA nanoparticles was investigated by means of TEM. The glycidyl-functionalized PMMA has two regions of T_g which are at around 90 °C and 125 °C, respectively, of which the first one was attributed to the poly[(methyl methacrylate)-ran-(glycidyl methacrylate)] and the second one was due to the PMMA. A core/shell structure of the glycidyl-functionalized PMMA latex nanoparticles was observed.     

Organic–inorganic polypyrrole‐surface modified SiO2 hybrid nanocomposites: a facile and green synthetic approach

Organic–inorganic hybrid nanocomposites composed of conductive polypyrrole (PPy) and surface modified silica (SiO₂) were successfully prepared through an in situ chemical oxidative polymerization in supercritical carbon dioxide (scCO₂). SiO₂ nanoparticles were surface modified using 3‐methacryloxypropyltrimethoxysilane (MPTMS) in order to disperse well in the medium. Transmission electron microscopy (TEM) and scanning electron microscopy (SEM) showed that the SiO₂ nanoparticles were encapsulated into the polymer. UV‐visible spectra of the diluted colloidal dispersions of PPy/SiO₂ hybrid nanocomposites were similar to those of PPy system. Fourier transform infrared spectroscopy (FT‐IR) suggested the strong interaction between PPy and SiO₂. Surface characterizations of nanocomposites were described by X‐ray photoelectron spectroscopy (XPS). The nanocomposites synthesized in scCO₂ have been shown to possess higher electrical conductivity and thermal stability. Copyright © 2009 John Wiley & Sons, Ltd.     

Silica aerogel-filled PMMA by in situ reverse atom transfer radical polymerization: kinetics and thermal studies

Hydrophobically modified silica aerogel nanoparticles (H-SiANp) were used for in situ polymerization of methyl methacrylate by reverse atom transfer radical polymerization to synthesize well-defined PMMA nanocomposites. Inherent characteristics of the prepared H-SiANp were evaluated by nitrogen adsorption/desorption isotherms, SEM, and TEM. Conversion and molecular weight determinations were carried out using GC and SEC, respectively. Addition of 3 mass% of the H-SiANp leads to decrement of conversion from 92 to 74%. Molecular weight of poly (methyl methacrylate) chains also decreases from 19,737 to 15,662 g mol^?1 by addition of only 3 mass% H-SiANp; however, PDI values increase from 1.36 to 1.82. Linear increase of ln(M₀/M) with time for all the samples shows that polymerization proceeds in a living manner. In addition, suitable agreement between theoretical and experimental molecular weight in combination with low PDI values can appropriately demonstrate the living nature of the polymerization. TG results indicate that by increasing H-SiANp content, improvements in thermal stability of the nanocomposites were obtained. DSC results show a decrease in glass transition temperature from 87.4 to 80.9 °C by addition of 3 mass% H-SiANp.

     

Dispersion Polymerization of Methyl Methacrylate in Supercritical Carbon Dioxide in the Presence of Random Copolymers

Summary: Statistical random copolymers of 1H,1H‐perfluorooctyl methacrylate and 2‐dimethylaminoethyl methacrylate, poly(FOMA‐co‐DMAEMA), effectively stabilized the dispersion polymerization of methyl methacrylate in supercritical carbon dioxide. Free‐flowing, micron‐sized spherical PMMA particles could be produced with poly(FOMA‐co‐DMAEMA) containing 34 w/w% FOMA.

SEM image of PMMA particles prepared with poly(FOMA‐co‐DMAEMA) (34:66).     

Influence of surface modified TiO2 nanoparticles by gallates on the properties of PMMA/TiO2 nanocomposites

Nanocomposites based on poly(methyl methacrylate) (PMMA) and TiO₂ nanoparticles were synthesized by in situ radical polymerization of MMA in solution. The surface of TiO₂ nanoparticles was modified with four gallic acid esters (octyl, decyl, lauryl and cetyl gallate). The content of gallates present on the surface of TiO₂ was calculated from the TGA results. The influence of length of hydrophobic tail of amphiphilic alkyl gallates on dispersability of surface modified TiO₂ nanoparticles in PMMA matrix, the molecular weight and glass transition temperature of PMMA, as well as the thermal stability of the prepared PMMA/TiO₂ nanocomposites in nitrogen and air was investigated. The influence of content of TiO₂ nanoparticles on the properties of these nanocomposites was also examined. The formation of a charge transfer complex between the surface Ti atoms and the gallates was confirmed by FTIR and UV spectroscopy. TEM micrographs of the PMMA/TiO₂ nanocomposites revealed that degree of TiO₂ aggregation can be significantly lowered by increasing the length of aliphatic part of the used gallates. The molecular weight of PMMA slightly decreases with the increase of TiO₂ content, indicating that used TiO₂ nanoparticles act as radical scavengers during the polymerization of MMA. The presence of surface modified TiO₂ nanoparticles do not have an influence on the mobility of PMMA chain segments leading to the same values of glass transition temperature for all investigated samples. Thermal and thermo-oxidative stability of the PMMA matrix are improved by introducing TiO₂ nanoparticles modified with gallates.     

Transparent poly(methyl methacrylate)/TiO<Subscript>2</Subscript> nanocomposites for UV-shielding applications

Transparent poly(methyl methacrylate) (PMMA)/TiO₂ nanocomposites have been prepared by solution mixing PMMA with organically soluble titania xerogel. The organically soluble titania xerogel in the form of amorphous phase has been synthesized via a simple sol-gel method, involving hydrolysis of tetrabutyl titanate (TBT) in trifluoroacetic acid (TFA) and gelation. The obtained PMMA/TiO₂ nanocomposites were characterized by Fourier transform infrared spectroscopy (FTIR), transmission electron microscope (TEM), thermogravimetry (TG) and ultraviolet-visible (UV-vis) absorption spectroscopy. The results showed that the interaction between titania nanoparticles and PMMA macromolecular chains led to a homogeneous dispersion of TiO₂ in PMMA matrix. The resulting PMMA/TiO₂ nanocomposites showed improved thermal stability, high transparency and high UV-shielding efficiency with a small amount of titania xerogel (≤3.0 wt %). The present work is of interest for developing a series of transparent UV-shielding nanocomposites.     

Poly(methyl methacrylate)/silica/titania ternary nanocomposites with greatly improved thermal and ultraviolet-shielding properties

Poly(methyl methacrylate) (PMMA)/silica/titania ternary nanocomposites with covalent bonding interaction between polymer and inorganic phases have been prepared using a novel non-hydrolytic sol-gel method. Transmission electron microscope (TEM) image of silica/titania binary inorganic component indicates a core-shell-like structure. Scanning electron microscope (SEM) images suggest that the well dispersed silica/titania particles in the hybrid are on the nanometer-scale. The transparencies of nanocomposites are maintained in visible region while the absorption band in ultraviolet (UV) region is red shifted with increasing inorganic content. The thermogravimetric analysis (TGA) results show that the thermal stability of PMMA copolymer increases dramatically with the addition of silica/titania moieties both in nitrogen and in air.