EPR analysis of the interacting properties and the degradation over time and irradiation of mastic resin used for painting protection

Mastic resin used as a covering film for painting protection was analyzed by electron paramagnetic resonance (EPR) spectroscopy, both as received and upon aging in sun-light. The effect of prolonged exposure to sun-light was mimicked by UV and, more so, by xenon lamp irradiation. Solid mastic presented EPR signals due to radicals trapped by PBN in solution. Data in the literature indicated the formation of acyl radicals (RCO·). These radicals preferentially dissolved in medium polarity solvents. The radical concentration in the solid mastic increased over time more than 50 times upon UV irradiation for 96 h and, even more, by xenon irradiation for 800 h. Also the PBN-trapped radicals in solution increased in concentration by irradiation. Small nitroxide radicals (TEMPO) interacted with a polar fraction of mastic dissolved in methanol, but mainly interacted with low polar mastic molecules in hydrophobic solvents. It was suggested, on the basis of both the PBN-spin trapping data and the TEMPO mobility variation in the solvents at different polarities, that terpenoid molecules partially polymerize by a radical mechanism to form low molecular weight products. A polyaromatic-radical (pyrene-TEMPO) and a biomolecule-radical (doxylcholestane) both interact weakly with mastic molecules in cyclohexane solutions. A positively charged surfactant radical (dimethylammonium-TEMPO bromide) was easily adsorbed onto the solid mastic surface suggesting that detergents are responsible for mastic degradation. In conclusion, this study provided information on the degradation mechanism of mastic resin and on its interacting ability towards external molecules and pollutants.     

Photophysical properties of tyrosine and its simple derivatives in organic solvents studied by time-resolved fluorescence spectroscopy and global analysis

Photophysical properties of tyrosine and its derivatives with free and blocked functional groups were studied by steady state and time-resolved fluorescence spectroscopy and global analysis in organic solvents, such as methanol, 2-propanol, tetrahydrofuran (THF), and dimethylsulfoxide (DMSO). The mono-exponential fluorescence intensity decays were observed for all tyrosine derivatives in THF and DMSO solutions, whereas in alcohols some derivatives have bi-exponential decays. The rotamer population calculated from 1H nuclear magnetic resonance spectroscopy in DMSO does not correspond to the pre-exponential factors obtained from fluorescence spectroscopy. Moreover in the case of DMSO, the strong interaction of this solvent with the hydroxyl group of the fluorophore's phenol ring causes substantial changes in the fluorescence and nonradiative rate constants of tyrosine derivatives compared with those of tyrosine with a blocked hydroxyl group, Tyr(Me). The steady state and time-resolved fluorescence measurements in pure organic solvents and water-organic solvent mixtures indicate that the fluorescence quenching of the phenol chromophore of tyrosine by an acetyl or amide group or both depends on the polarity of the solvent used as well as the ability of the solvent to form hydrogen bonds with functional groups of tyrosine.     

Photostability of bacteriochlorophyll a and derivatives: potential sensitizers for photodynamic tumor therapy

The photostabilities of bacteriochlorophyll a and several of its derivatives, which are of interest as potential sensitizers in photodynamic tumor therapy, were investigated. The pigments were irradiated with light >630 nm in organic solvents (acetone, tetrahydrofuran, pyridine, methanol, ethanol, n-propanol, 2-propanol and toluene) and in aqueous detergent solutions (cetyl-trimethyl-ammonium bromide [CTAB], lauryldimethyl-aminoxide [LDAO] or sodium dodecyl-sulfate [SDS] and Triton X-100 [TX100]). Their stabilities in these different solvents were determined in the presence and absence of an external sensitizer (pyromethyl-pheophorbide a), oxygen, sodium ascorbate and inert gas (Ar) or vacuum. The photodegradation products of bacteriochlorophyll a in acetone solution were isolated, purified by HPLC and analyzed by their absorption spectra and mass spectroscopy. Besides the well-known dehydrogenation products, such as [3-acetyl]-chlorophyll a, which were obtained as by-products, the major products had low absorption in the visible-near infrared spectral range. The spectral signature of the major component of these products was characteristic of linear open-chain tetrapyrroles, but they lacked the characteristic protonation-deprotonation behavior and reactivity of bilins with Zn(++).     

Cation-exchange behaviour of several elements in hydrofluoric acid-organic solvent media

The cation-exchange characteristics of 15 elements with the strongly acidic cation-exchange resin Dowex 50 x 8 were investigated in media containing varying concentrations of organic solvents and aqueous hydrofluoric acid. The determination of the distribution coefficients was carried out in 0.15-1.2 M hydrofluoric acid solutions containing 0-90% of the organic solvents methanol, ethanol, n-propanol, isopropanol, methyl glycol, acetone, tetrahydrofuran, and acetic acid. Based on these distribution data the possibilities of separations of the various elements are indicated and discussed.     

Highly luminescent lead sulfide nanocrystals in organic solvents and water through ligand exchange with poly(acrylic acid)

Hydrophobic lead sulfide quantum dots (PbS/OA) synthesized in the presence of oleic acid were transferred from nonpolar organic solvents to polar solvents such as alcohols and water by a simple ligand exchange with poly(acrylic acid) (PAA). Ligand exchange took place rapidly at room temperature When a colloidal solution of PbS/OA in tetrahydrofuran (THF) was treated with excess PAA, the PbS/PAA nanocrystals that formed were insoluble in hexane and toluene but could be dissolved in methanol or water, where they formed colloidal solutions that were stable for months. Ligand exchange was accompanied by a small blue shift in the band-edge absorption, consistent with a small reduction in particle size. While there was a decrease in quantum yield associated with ligand exchange and transfer to polar solvents, as is commonly found for colloidal quantum dots, the quantum yields determined were impressively high: PbS/OA in toluene (82%) and in THF (58%); PbS/PAA in THF (42%) and in water (24%). The quantum yields for the PbS/PAA solutions decreased over time as the solutions were allowed to age in the presence of air.     

Morphology and transport properties of protons and methanol through partially sulfonated block copolymers

The morphological changes with different compositions of casting solvents in the membranes of sulfonated polystyrene-block-poly(ethylene-ran-butylene)-block-polystyrene (SEBS) were investigated with small-angle X-ray scattering (SAXS) and transmission electron microscope (TEM). Using the single solvent of tetrahydrofuran (THF) and the solvent mixtures of methanol/THF with different compositions, the casting polymer solutions were prepared for the membrane fabrication. The proton conductivity and the methanol permeability of membranes were measured, and the effect of morphological changes on the casting solvents was discussed through Flory–Huggins theory. It was found that the sulfonated SEBS membranes were transformed from well ordered lamellar to disordered co-continuous structure and the morphological difference caused abrupt enhancement in the proton conductivity and the methanol permeability as the concentration of methanol in the mixed solvents (MeOH/THF) increased.     

Photodegradation Kinetics of Fexofenadine Hydrochloride Using a LC Method

The kinetics of photodegradation of the antihistamine fexofenadine hydrochloride using a stability-indicating high performance liquid chromatography (HPLC) method is demonstrated. The degradation was carried out in methanol and in water solutions, prepared from coated tablets, in quartz cells under UV light at 254 nm. The kinetics parameters of order of reaction and the rate constants of the degradation were determined for both solvents. The degradation process of fexofenadine hydrochloride in solutions can be described by second-order kinetics under the experimental conditions used in this study. The obtained results show that the HPLC method is satisfactory in the determination of the kinetics of degradation of fexofenadine hydrochloride in the presence of its photolytic degradation products.     

Oligomerization of ethylene to branched alkenes using neutral phosphinosulfonamide nickel(II) complexes

A series of neutral phosphinosulfonamide complexes of nickel(II) were synthesized that catalyzed the oligomerization of ethylene to branched oligomers with average degrees of polymerization between 10 and 35. Branching numbers varied from 17 to 80 branches per 1000 carbons, depending on the catalyst structure and reaction conditions. The catalysts were active in a variety of solvents, including toluene, CH₂Cl₂, tetrahydrofuran, ethyl acetate, and methanol, but showed decreasing activity at temperatures higher than 40 °C. Electron‐rich phosphinosulfonamides produced the highest catalyst activities in a series of structure–reactivity studies. The mechanism of oligomer formation was investigated with ¹H NMR spectroscopy, which indicated that branching arose from the isomerization of the nickel alkyl species during propagation rather than the reincorporation of α‐olefin products. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4627–4640, 2000     

Statistical Mixture Design Applied to RP-HPTLC Chromatographic Separations of Amino Acid Hydroxamates

Abstract

Mixture Design and a Chromatographic Response Function were used to study the effect of different organic solvents as modifiers on the Reversed Phase (C-18) High Performance Thin Layer Chromatographic separation of three amino acid hydroxamates (Arginine hydroxamate, Threonine hydroxamate, and Histidine hydroxamate). Both 3 solvent (methanol, acetonitrile and tetrahydrofuran) and 4 solvent (methanol, acetonitrite, tetrahydrofuran and acetone) systems were studied.     

溶剂对脂肪酶降解高分子量PBS及改性共聚物的影响

采用固定化脂肪酶分别在四氢呋喃(THF)、甲苯及THF和甲苯的混合溶剂体系中, 对高分子量的PBS及PBS/CHDM共聚物进行了催化降解, 用GPC测定了降解产物的分子量, 用质谱(MS)对降解产物进行了分析, 用FTIR表征了产物化学结构. 研究结果表明, 在脂肪酶的作用下, 对M_n在10⁵以上的PBS, 在THF体系中可降解到1.4×10⁴, 而在甲苯体系中可降解到4×10⁴; 但在THF和甲苯的混合体系中, 可将M_n 10⁵以上的PBS和PBS/CHDM共聚物都可降解为0.1×10⁴以下的原料单体、一至四环状低聚物及少量线型低聚物. 分析了水含量对酶解反应的影响.     

AGGREGATION OF MONOVINYL- and DIVINYL-PROTOCHLOROPHYLLIDE IN ORGANICSOLVENTS*

Abstract— Two different protochlorophyllides (PChlide), PChlide 629/433 (absorption data in methanol) and PChlide 630/441 (the monovinyl (MV) and divinyl (DV) forms) were isolated from the pigment mutant C-2A'of Scenedesmus obliquus. Their spectroscopic behaviour in several organic solvents and their aggregation in toluene was investigated. In polar solvents such as ether, acetonitril or acetone, absorption maxima similar to those in methanol were observed, while in solvents such as tetrahydrofuran and pyridine a bathochromic shift of the blue absorption band compared to the spectra in methanol occurred. The absorption maxima of MV-PChlide shifted from 629 nm and 433 nm in methanol (monomeric form), to 631 nm and 443 nm in toluene (aggregated form). The absorption maxima of DV-PChlide shifted from 630 nm and 441 nm in methanol to 655 nm and 483 nm in toluene (aggregated form). The fluorescence excitation and emission spectra of the two protochlorophyllides yielded the according results. The aggregation process was faster for DV-PChlide than for MV-PChlide and was reversible upon addition of small amounts of polar solvents. The similarity of the spectral characteristics of the aggregated forms of the different protochlorophyllides after toluene treatment with those reported for “active”-PChlide in vivo are discussed.     

Sulfated mesoporous alumina: a highly effective solid strong base catalyst for the Tishchenko reaction in supercritical carbon dioxide

Heterogeneous strong base catalysis for the intramolecular Tishchenko reaction of aromatic 1,2-dicarbaldehydes to the corresponding phthalides in supercritical CO2CscCO2 has been realized with mesoporous alumina containing SO4(2-) ions in the alumina framework (mesoAl2O3/SO4(2-)). Infrared spectroscopy of pyrrole adsorbed on the alumina and strong poisoning by a weak Br?nsted acid of methanol revealed that the SO4(2-) ions in the framework slightly suppressed the average strength of base sites (O2-) on mesoAl2O3/SO4(2-), but there exists a small number of strong base sites that promote the Tishchenko reaction in scCO2. Although the intramolecular Tishchenko reaction of phthalaldehyde to phthalide in scCO2 was somewhat slower than those in organic solvents such as tetrahydrofuran (THF) and benzene, the addition of a small amount of THF as a cosolvent remarkably increased the reaction rate; the reaction in the scCO2-THF system proceeded 1.5-fold faster than those in pure benzene and THF solvents.     

Preparation and characterization of copper(II) tetrasulfonated phthalocyanine nanoparticles formed by laser ablation in poor solvents

Laser irradiation of copper(II) tetrasulfonated phthalocyanine (CuTsPc) microcrystals in poor organic solvents such as methanol, 2-methyl-2-propanol, ethanol, tetrahydrofuran, and acetone has produced CuTsPc nanoparticles with 15–112 nm in diameter. Field emission scanning electron microscopy (FESEM) images have shown the formation of CuTsPc nanoparticles in poor organic solvents used in this work. The mean diameters of CuTsPc nanoparticles obtained from transmission electron microscopy (TEM) images in methanol, 2-methyl-2-propanol, ethanol, tetrahydrofuran, and acetone were determined to be 26, 36, 35, 86, and 78 nm, respectively. A correlation between the size of CuTsPc nanoparticles and a solvent polarity could be found in this work.     

Covalent surface functionalization of multiwalled carbon nanotubes through bergman cyclization of enediyne‐containing dendrimers

A method for covalent functionalization of multiwalled carbon nanotubes (MWCNTs) was developed using the free radicals generated through Bergman cyclization of enediyne‐containing compounds. Four enediyne‐bearing Frechet type dendrimers were synthesized in good quantities and characterized. Then, the enediyne‐containing molecules were reacted with MWCNTs in N‐methyl‐2‐pyrrolidinone at 206 °C under nitrogen. The structure and morphology of the resulting products were characterized by thermogravimetric analysis, ultraviolet–visible spectroscopy, Fourier transform infrared spectroscopy, Raman spectroscopy, and transmission electron microscopy. The dendrimer‐functionalized MWCNTs showed good solubility/dispersibility in common organic solvents and polymer solutions. They were used in the formation of polymer composites through electrospinning with polycaprolactone. The results confirmed the surface functionalization of MWCNTs. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Coloring-decoloring behavior of amphiphilic fluoroalkyl end-capped N-(1,1-dimethyl-3-oxobutyl)acrylamide--acryloylmorpholine cooligomer/fluorescein nanocomposites in protic and aprotic solvents

Amphiphilic fluoroalkyl end-capped N-(1,1-dimethyl-3-oxobutyl)acrylamide-acryloylmorpholine cooligomer/fluorescein nanocomposites afforded brilliant yellow-colored solutions in not only protic solvents such as methanol and ethanol but also protic-like solvents such as dichloromethane and 1,2-dichloroethane, respectively. However, the corresponding non-fluorinated cooligomer/fluorescein composites and parent fluorescein gave the colorless solutions under similar conditions. On the other hand, unexpectedly, such brilliant yellow-colored solutions provided by these fluorinated nanocomposites completely disappeared in aprotic solvents such as N,N-dimethylformamide, dimethyl sulfoxide, and tetrahydrofuran. Thus, these fluorinated fluorescein nanocomposites can exhibit a coloring-decoloring behavior through solvatochromic response.     

Ionization mechanism of negative ion-direct analysis in real time: A comparative study with negative ion-atmospheric pressure photoionization

The ionization mechanism of negative ion-direct analysis in real time (NI-DART) has been investigated using over 42 compounds, including fullerenes, perfluorocarbons (PFC), organic explosives, phenols, pentafluorobenzyl (PFB) derivatized phenols, anilines, and carboxylic acids, which were previously studied by negative ion-atmospheric pressure photoionization (NI-APPI). NI-DART generated ionization products similar to NI-APPI, which led to four ionization mechanisms, including electron capture (EC), dissociative EC, proton transfer, and anion attachment. These four ionization mechanisms make both NI-DART and NI-APPI capable of ionizing a wider range of compounds than negative ion-atmospheric pressure chemical ionization (APCI) or negative ion-electrospray ionization (ESI). As the operation of NI-DART is much easier than that of NI-APPI and the gas-phase ion chemistry of NI-DART is more easily manipulated than that of NI-APPI, NI-DART can be therefore used to study in detail the ionization mechanism of LC/NI-APPI-MS, which would be a powerful methodology for the quantification of low-polarity compounds. Herein, one such application has been further demonstrated in the detection and identification of background ions from LC solvents and APPI dopants, including water, acetonitrile, chloroform, methylene chloride, methanol, 2-propanol, hexanes, heptane, cyclohexane, acetone, tetrahydrofuran (THF), 1,4-dioxane, toluene, and anisole. Possible reaction pathways leading to the formation of these background ions were further inferred. One of the conclusions from these experiments is that THF and 1,4-dioxane are inappropriate to be used as solvents and/or dopants for LC/NI-APPI-MS due to their high reactivity with source basic ions, leading to many reactant ions in the background.     

Characterization of degradation products of poly[(3,3,3-trifluoropropyl)methylsiloxane] by nuclear magnetic resonance spectroscopy, mass spectrometry and gas chromatography

Poly[(3,3,3-trifluoropropyl)methylsiloxane] (PTFPMS) was treated with the solvents acetone, ethyl acetate and methanol and its degradation products were analyzed with multiple techniques. ¹H, ²⁹Si and ¹⁹F nuclear magnetic resonance (NMR) spectroscopy were useful for the characterization of the intact polymers and for the determination of cyclosiloxanes. Cyclosiloxanes with a ring size of up to 23 were quantified by gas chromatography. The only degradation products found were TFPmethyl-cyclosiloxanes. 1,3,5,7-Tetrakis(TFPmethyl)-cyclotetrasiloxane was predominant, and (TFPmethyl)cyclotri-, penta- and hexasiloxane could be detected at lower concentrations. The identity of cyclic degradation products with a ring size of up to 6 was unambiguously confirmed by direct infusion mass spectrometry. The TFPmethyl-cyclosiloxanes were successfully ionized by electrospray ionization in the negative mode. None of the techniques applied gave hints to other degradation products such as short linear oligomers. Almost complete degradation of PTFPMS occurred in acetone and methanol, while degradation is distinctly reduced in ethyl acetate.     

Solvent effects on Pt-Ru/C catalyst for methanol electro-oxidation

Alloying degree, particle size and the level of dispersion are the key structural parameters of Pt-Ru/C catalyst in fuel cells. Solvent(s) used in the preparation process can affect the particle size and alloying degree of the object substance, which lead to a great positive impact on its properties. In this work, three types of solvents and their mixtures were used in preparation of the Pt-Ru/C catalysts by chemical reduction of metal precursors with sodium borohydride at room temperature. The structure of the catalysts was characterized by X-ray diffraction (XRD) and Transmission electron microscopy (TEM). The catalytic activity and stability for methanol electro-oxidation were studied by Cyclic Voltammetry (CV) and Chronoamperometry (CA). Pt-Ru/C catalyst prepared in H₂O or binary solvents of H₂O and isopropanol had large particle size and low alloying degree leading to low catalytic activity and less stability in methanol electro-oxidation. When tetrahydrofuran was added to the above solvent systems, Pt-Ru/C catalyst prepared had smaller particle size and higher alloying degree which resulted in better catalytic activity, lower onset and peak potentials, compared with the above catalysts. Moreover, the catalyst prepared in ternary solvents of isopropanol, water and tetrahydrofuran had the smallest particle size, and the high alloying degree and the dispersion kept unchanged. Therefore, this kind of catalyst showed the highest catalytic activity and good stability for methanol electro-oxidation.     

The mechanism of perylene photo-oxidation in a water-soluble polymeric photocatalyst

The photo-oxidation of perylene in aqueous solutions of a polymeric photocatalyst was investigated to probe the mechanism of polycyclic aromatic hydrocarbon degradation. Perylene and other hydrophobic molecules are efficiently solubilized in aqueous polymer solutions with distribution coefficients as high as 4 x 10⁶. The rate of perylene photo-oxidation was much more rapid in aqueous polymer solutions than in organic solvents. In organic solvents, ¹0₂ sensitizers (rose bengal) had little effect on the reaction, but electron acceptors, such as dicyanobenzene, caused an acceleration in rate. Naphthoquinone was suggested as a potential electron acceptor in the naphthalene-containing polymer, and it was shown to be formed in small concentrations by polymer oxidation. It was concluded that the polymer plays several key functions in perylene photo-oxidation: (1) solubilization of the hydrophobic molecule; (2) energy migration through the polymer coil and energy transfer, providing additional photochemical energy to the reactants; (3) the enhancement of oxidation by photoinduced electron transfer via provision of an electron acceptor and facilitation of charge separation.     

Cation-exchange behaviour of several elements in hydrochloric acid-organic solvent media

In the present paper the cation-exchange characteristics of 20 elements towards the strongly acidic cation-exchange resin Dowex 50 X 8 in media containing varying concentrations of organic solvents and aqueous hydrochloric acid were investigated. Based on the determination of the distribution coefficients of these elements in the organic solvents methanol, ethanol, n-propanol, isopropanol, methyl glycol, acetone, tetrahydrofuran, and acetic acid, the conditions most suitable for their quantitative separation are indicated and discussed.