Highly luminescent, stable, and water-soluble CdSe/CdS core-shell dendron nanocrystals with carboxylate anchoring groups

A dendron ligand with two carboxylate anchoring groups at its focal point and eight hydroxyl groups as its terminal groups was found to efficiently convert as-synthesized CdSe/CdS core-shell nanocrystals in toluene to water-soluble dendron-ligand stabilized nanocrystals (dendron nanocrystals). The resulting dendron nanocrystals retained 60% of the photoluminescence value of the original CdSe/CdS core-shell nanocrystals in toluene and were significantly brighter than the similar dendron nanocrystals with thiolate (deprotonated thiol group) as the anchoring group which retained just 10% of the photoluminescence value of the original CdSe/CdS core-shell nanocrystals in toluene. The carboxylate-based dendron nanocrystals survived UV irradiation in air for at least 13 days, about 9 times better than the thiolate-based dendron nanocrystals (35 h) and similar to that of the thiolate-based dendron-box stabilized CdSe/CdS core-shell nanocrystals (box nanocrystals). Upon UV irradiation, the dendron nanocrystals became even 2 times brighter than the original CdSe/CdS core-shell nanocrystals in toluene, and the UV-brightened PL can retain the brightness for at least several months. These stable and bright dendron nanocrystals were soluble in various aqueous media, including all common biological buffer solutions tested, for at least 1.5 years. In addition to their superior performance, the synthetic chemistry of carboxylate dendron ligands and the corresponding dendron nanocrystals is relatively simple and with high yield.     

Controlled synthesis and magnetic properties of bimagnetic spinel ferrite CoFe2O4 and MnFe2O4 nanocrystals with core-shell architecture

A combination of hard phase CoFe(2)O(4) and soft phase MnFe(2)O(4) as the bimagnetic nanocrystals in a core-shell architecture has been synthesized, and their magnetic properties have been systematically studied. Both HRTEM and EDS results confirmed the formation of bimagnetic core-shell structured nanocrystals. On the basis of the systematic and comparative studies of the magnetic properties of a mechanical mixture of pure CoFe(2)O(4) and MnFe(2)O(4) nanocrystals, chemically mixed Co(1-x)Mn(x)Fe(2)O(4) nanocrystals, and bimagnetic core-shell CoFe(2)O(4)@MnFe(2)O(4) and MnFe(2)O(4)@CoFe(2)O(4) nanocrystals, the bimagnetic core-shell nanocrystals show very unique magnetic properties, such as the blocking temperature and coercivity. Our results show that the coercivity correlates with the volume fraction of the soft phase as the theoretical hard-soft phase model has suggested. Furthermore, switching the hard phase CoFe(2)O(4) from the core to the shell shows great changes in the coercivity of the nanocrystals. The bimagnetic core-shell nanocrystals evidently demonstrate the rational design capability to separately control the blocking temperature and the coercivity in magnetic nanocrystals by varying the materials, their combination, and the volume ratio between the core and the shell and by switching hard or soft phase materials between the core and shell. Such controls via a bimagnetic core-shell architecture are highly desirable for magnetic nanocrystals in various applications.     

利用离子型Cd源制备ZnSe/CdSe核-壳结构纳米晶

在有机相体系中利用ZnSe前驱体纳米晶制备过程中的富Se环境,以引入Cd2+的方式在相对温和的环境下通过控制Cd2+离子的加入量及调节反应时间,成功制备了ZnSe/CdSe核-壳复合结构纳米晶.利用X射线衍射(XRD)、透射电镜(TEM)、紫外-可见吸收光谱(UV-vis)和荧光光谱(FL)对其结构形貌以及光学性质进行表征和分析的结果表明,CdSe以外延生长的方式包覆在ZnSe纳米晶表面从而形成具有良好结晶性的核-壳复合结构,其荧光发射始终保持良好单色性,同时实现了在500～620nm可见光范围内的连续可调.     

Microwave-assisted growth and characterization of water-dispersed CdTe/CdS core-shell nanocrystals with high photoluminescence

A novel microwave-assisted method of growth of high-quality CdTe/CdS core-shell nanocrystals in the aqueous phase is presented in this paper. The photoluminescence quantum yield (PLQY) is greatly enhanced by epitaxial growth of the CdS shell. Under optimum conditions, the PLQY of as-prepared nanocrystals reaches as high as 75% without any post-treatment. Furthermore, these investigations demonstrate that microwave irradiation is tremendously useful for fast epitaxial growth of nanocrystals due to its special characteristics. As a result, the microwave synthesis is sufficiently time-economizing (only five minutes are required) to obtain optimum amounts of CdTe/CdS core-shell nanocrystals in comparison to the conventional illumination method (several days are required). Therefore, this current research not only provides a rapid microwave synthesis for producing highly fluorescent CdTe/CdS core-shell nanocrystals, but also it presents some advantages of the microwave synthesis in comparison to the illumination method.     

Preparation of CdSe/ZnSe Core-shell Nanocrystal in One-step Reaction

IntroductionSemiconductor nanocrystals show strong size-de-pendent properties when their size is similar to or smal-ler than the excition Bohr radius of the bulk materialsand quantum confinement occurs for the space-con-fined motion of the electrons and holes in the nano-re-gion of materials[1—5].Because of the excellent opticaland electronic properties,semiconductor nanocrystalsare currently being investigated as emitting materials forthin-film light-emitting devices(LED)[6,7],low-thresh-ol…     

MnO octahedral nanocrystals and MnO@C core-shell composites: synthesis, characterization, and electrocatalytic properties

We present a simple and facile synthesis of MnO octahedral nanocrystals and MnO@C core-shell composite nanoparticles. The synthesis is accomplished by a single-step direct pyrolysis of cetyltrimethylammonium permanganate in specially made Let-lock union cells. The products are characterized by HRSEM, HRTEM, Raman spectroscopy, and cyclic voltammetry (CV). The product consists mainly of octahedral MnO nanocrystals and MnO coated with carbon (MnO@C). The core-shell particles are observed only when the core size is smaller than 150 nm. The shape of the nanocrystals can be controlled by varying parameters such as reaction temperature and duration. As the temperature increases from 600 to 800 degrees C, the octahedral MnO crystals observed are without any carbon shell. The effect of time and temperature on the octahedral MnO nanocrystal formation is described. The electrocatalytic activities of the products are studied for oxygen reduction reaction in aqueous basic medium and are compared with bulk MnO. The MnO nanocrystals and core-shell composites exhibit higher activity than that of bulk MnO.     

Multilayer core-shell nanostructures for enhanced 808 nm responsive upconversion

The construction of core-shell structure is an effective strategy for promoting the emission efficiency of upconversion nanocrystals(UCNCs). In this work, the UCNCs based on Nd-doping with a multilayer coreshell nanostructure are fabricated toward achieving efficient upconversion for 808 nm excitation, which have great potential for optical applications, especially photobiological applications.     

An EQCN assessment of electrocatalytic oxidation of methanol at nanostructured Au–Pt alloy nanoparticles

Alloy nanocrystals encapsulated with alkyl dithiolates (“core-shell” nanoparticles) serve as an intriguing class of nanostructured catalysts. This paper reports the preliminary results of an electrochemical quartz-crystal nanobalance (EQCN) investigation of mass transport associated with the catalytic activation and methanol oxidation at nanostructured Au–Pt nanocrystals. It is demonstrated that the catalytic activation and oxidation of methanol are accompanied by mass fluxes across the nanostructured film. The mass transport involves oxidation–reduction of surface oxygenated species, methanol adsorption and oxidation, solvent breath and product release. The implication of the EQCN results to the understanding of the core-shell nanostructured catalytic mechanism is discussed.     

Synthesis of mixed silver halide nanocrystals in reversed micelles

The specifics of the synthesis of silver halide nanocrystals of mixed composition and the core-shell structures in reversed micelles were experimentally studied. It was shown that homogeneous AgBr _x I_{1 ? x} nanocrystals of ～5 nm in size with the iodide concentration up to 70%, as well as the core-shell structures AgI/AgBr and AgBr/AgI, can be synthesized by the micellar synthesis. It was found that the relation of the crystalline structures of the core and shell materials plays an important role in the shell formation. The shell of γ-AgI alone is formed on the AgBr nanocrystals with a close lattice type, whereas β-AgI with the hexagonal lattice forms an individual phase of nanoparticles, rather than the shell.     

Mn:ZnSe/ZnS核-壳结构纳米晶的无膦法制备和光学性质

以溶于十八烯的Se作为Se前驱体,在无膦条件下制备得到了具有较高量子产率的Mn:ZnSe纳米晶.为了进一步提高纳米晶的稳定性和发光强度,运用外延生长的方法进行ZnS壳层包覆并得到了具有核-壳结构的Mn:ZnSe/ZnS纳米晶.X射线衍射、透射电子显微镜及吸收和荧光光谱测试结果表明,该方法合成的Mn:ZnSe纳米晶以及核-壳结构Mn:ZnSe/ZnS纳米晶均为闪锌矿结构,具有良好的单分散性,包覆ZnS外壳层后量子产率可达到60%以上.此外,对ZnS壳层厚度和Mn2+的掺杂量对Mn:ZnSe/ZnS纳米晶发光强度的影响及发光机制也进行了初步讨论.     

Facet-dependent and au nanocrystal-enhanced electrical and photocatalytic properties of Au-Cu2O core-shell heterostructures

We report highly facet-dependent electrical properties of Cu(2)O nanocubes and octahedra and significant enhancement of gold nanocrystal cores to the electrical conductivity of Au-Cu(2)O core-shell octahedra. Cu(2)O nanocubes and octahedra and Au-Cu(2)O core-shell cubes and octahedra were synthesized by following our reported facile procedures at room temperature. Two oxide-free tungsten probes attached to a nanomanipulator installed inside a scanning electron microscope made contacts to a single Cu(2)O nanocrystal for the I-V measurements. Pristine Cu(2)O octahedra bounded by {111} facets are 1100 times more conductive than pristine Cu(2)O cubes enclosed by {100} faces, which are barely conductive. Core-shell cubes are only slightly more conductive than pristine cubes. A 10,000-fold increase in conductivity over a cube has been recorded for an octahedron. Remarkably, core-shell octahedra are far more conductive than pristine octahedra. The same facet-dependent electrical behavior can still be observed on a single nanocrystal exposing both {111} and {100} facets. This new fundamental property may be observable in other semiconductor nanocrystals. We also have shown that both core-shell cubes and octahedra outperform pristine cubes and octahedra in the photodegradation of methyl orange. Efficient photoinduced charge separation is attributed to this enhanced photocatalytic activity. Interestingly, facet-selective etching occurred over the {100} corners of some octahedra and core-shell octahedra during photocatalysis. The successful preparation of Au-Cu(2)O core-shell heterostructures with precise shape control has offered opportunities to discover new and exciting physical and chemical properties of nanocrystals.     

P3HT/CdS/TiO2/ZnO一维有序核壳式纳米棒阵列的构制及其在杂化太阳电池中的应用研究

采用恒电位法在铟锡氧化物导电玻璃(ITO)上制备了高度有序一维ZnO纳米棒阵列,将ZnO纳米棒阵列在TiO2溶胶中采用提拉法制备出了一维TiO2/ZnO核壳式纳米棒阵列.在一维TiO2/ZnO核壳式纳米棒阵列上电沉积CdS纳米晶得到一维CdS/TiO2/ZnO核壳式纳米棒阵列,然后在一维CdS/TiO2/ZnO核壳式纳米棒阵列上电沉积聚3-己基噻吩(P3HT)薄膜得到P3HT/CdS/TiO2/ZnO核壳式纳米结构薄膜.以该纳米结构薄膜电极为光阳极制备出新型纳米结构杂化太阳电池,研究了该类电池的光电转换性能,初步探讨了该类电池的工作机理.     

Synthesis of Au@Ag core-shell nanocubes containing varying shaped cores and their localized surface plasmon resonances

We have synthesized Au@Ag core-shell nanocubes containing Au cores with varying shapes and sizes through modified seed-mediated methods. Bromide ions are found to be crucial in the epitaxial growth of Ag atoms onto Au cores and in the formation of the shell's cubic shape. The Au@Ag core-shell nanocubes exhibit very abundant and distinct localized surface plasmon resonance (LSPR) properties, which are core-shape and size-dependent. With the help of theoretical calculation, the physical origin and the resonance mode profile of each LSPR peak are identified and studied. The core-shell nanocrystals with varying shaped cores offer a new rich category for LSPR control through the plasmonic coupling effect between core and shell materials.     

Correlation analysis of TEM images of nanocrystal molecules

Quantitative characterization of images of nanocrystals and nanostructures is a challenging but important task. The development and optimization of methods for the construction of complex nanostructures rely on imaging techniques. Computer programs were developed to quantify TEM images of nanocrystal/DNA nanostructures, and results are presented for heterodimers and trimers of gold nanocrystals. The programs presented here have also been used to analyze more complex trimers and tetramers linked by branched DNA, as well as for structures made from attaching gold nanocrystals to CdSe/ZnS core-shell quantum dots. This work has the additional goal of enabling others to quickly and easily adapt the methods for their own use.     

A facile one-pot synthesis of uniform core-shell silver nanoparticle@mesoporous silica nanospheres

The uniform core-shell silver nanoparticle@mesoporous silica nanospheres have been prepared by a simple one-pot synchronous method, which combines several steps into one, including the generation of silver nanocrystals and mesoporous silica, transfer and aggregation of silver nanoparticles in an incompact silica framework.     

Pt-Ru supported on double-walled carbon nanotubes as high-performance anode catalysts for direct methanol fuel cells

Pt-Ru supported on carbon nanotubes (CNTs) (single-walled nanotubes, double-walled nanotubes (DWNTs), and multi-walled nanotubes) catalysts are prepared by an ethylene glycol reduction method. Pt-Ru nanoparticles with a diameter of 2-3 nm and narrow particle size distributions are uniformly deposited onto the CNTs. A simple and fast filtration method followed by a hot-press film transfer is employed to prepare the anode catalyst layer on a Nafion membrane. The Pt-Ru/DWNTs catalyst shows the highest specific activity for methanol oxidation reaction in rotating disk electrode experiments and the highest performance as an anode catalyst in direct methanol fuel cell (DMFC) single cell tests. The DMFC single cell with Pt-Ru/DWNTs (50 wt %, 0.34 mg Pt-Ru/cm(2)) produces a 68% enhancement of power density, and at the same time, an 83% reduction of Pt-Ru electrode loading when compared to Pt-Ru/C (40 wt %, 2.0 mg Pt-Ru/cm(2)).     

Simple cubic super crystals containing PbTe nanocubes and their core-shell building blocks

We report a preparation of high-quality cubic PbTe nanocrystals and their assembly into both square-array, two-dimensional patterns and three-dimensional simple cubic super crystals. The influence of oleylamine in the nanocrystal synthesis and core-shell formation through an anion-exchange mechanism was also studied. The simple cubic super crystals together with two-dimensional assembly patterns containing PbTe nanocubes and their core-shell building blocks were examined using TEM, SEM, AFM, XRD, SAXS, and FTIR. Such super crystals consisting of cubic structural building blocks may allow engineering of more complex materials from which novel properties may emerge.     

Hollow and cage-bell structured nanomaterials of noble metals

Mastery of the structure of nanomaterials enables control of their properties to enhance their performance for a given application. Herein we demonstrate the synthesis of metal nanomaterials with hollow interiors or cage-bell structures based on the inside-out diffusion of Ag in core-shell structured nanoparticles. It begins with the synthesis of core-shell Ag-M or core-shell-shell M(A)-Ag-M(B) nanoparticles in an organic solvent. Ag is then extracted from the core or the inner shell by bis(p-sulfonatophenyl)phenylphosphane, which binds strongly with Ag(I)/Ag(0) to allow the complete removal of Ag in 24-48 h, leaving behind an organosol of hollow or cage-bell structured metal nanomaterials. Because of their relatively lower densities, which usually translate to a higher surface area than their solid counterparts, the hollow and cage-bell structured metal nanomaterials are especially relevant to catalysis. For example, cage-bell structured Pt-Ru nanoparticles were found to display outstanding methanol tolerance for the cathode reaction of direct methanol fuel cells (DMFCs) as a result of the differential diffusion of methanol and oxygen in the cage-bell structure.     

One-Pot Synthesis of Pd@PtnL Core-Shell Icosahedral Nanocrystals in High Throughput through a Quantitative Analysis of the Reduction Kinetics

The rational design and implementation of a one-pot method is reported for the facile synthesis of Pd@Pt_nL (nL denotes the number of Pt atomic layers) core-shell icosahedral nanocrystals in a single step. The success of this method relies on the use of Na₂PdCl₄ and Pt(acac)₂ as the precursors to Pd and Pt atoms, respectively. Our quantitative analysis of the reduction kinetics indicates that the Pd^II and Pt^II precursors are sequentially reduced with a major gap between the two events. Specifically, the Pd^II precursor is reduced first, leading to the formation of Pd-based icosahedral seeds with a multiply-twinned structure. In contrast, the Pt^II precursor prefers to take a surface reduction pathway on the just-formed icosahedral seeds. As such, the otherwise extremely slow reduction of the Pt^II precursor can be dramatically accelerated through an autocatalytic process for the deposition of Pt atoms as a conformal shell on each Pd icosahedral core. Compared to the conventional approach of seed-mediated growth, the throughput for the one-pot synthesis of Pd@Pt_nL core-shell nanocrystals can be increased by more than 30-fold. When used as catalysts, the Pd@Pt_4.5L core-shell icosahedral nanocrystals show specific and mass activities of 0.83 mA cm⁻² and 0.39 A mg_Pt⁻¹, respectively, at 0.9 V toward oxygen reduction. The Pt-based nanocages derived from the core-shell nanocrystals also show enhanced specific (1.45 mA cm⁻²) and mass activities (0.75 A mg_Pt⁻¹) at 0.9 V, which are 3.8 and 3.3 times greater than those of the commercial Pt/C, respectively.     

Water-soluble CdSe and CdSe/CdS nanocrystals: a greener synthetic route

We report a new green synthetic route of CdSe and core-shell CdSe/CdS nanoparticles (NPs) in aqueous solutions. This route is performed under water-bath temperature, using Se powder as a selenium source to prepare CdSe NPs, and H(2)S generated by the reaction of Na(2)SH(2)SO(4) as a sulfur source to synthesize core-shell CdSe/CdS NPs at 25-35 degrees C. The synthesis time of every step is only 20 min. After illumination with ambient natural light, photoluminescence (PL) intensities of CdSe NPs enhanced up to 100 times. The core-shell CdSe/CdS NPs have stronger photoactive luminescence with quantum yields over 20%. The obtained CdSe NPs exhibit a favorable narrow PL band (FWHM: 50-37 nm) with increasing molar ratio of Cd/Se from 4:1 to 10:1 at pH 9.1 in the crude solution, whereas PL band of corresponding CdSe/CdS NPs is slightly narrower. The emission maxima of nanocrystals can be tuned in a wider range from 492 to 592 nm in water by changing synthesis temperature of CdSe core than those reported previously. The resulting new route is of particular interest as it uses readily-available reagents and simple equipment to synthesize high-quality water-soluble CdSe and CdSe/CdS nanocrystals.