Application of Polytyramine Nanoparticles to the Corrosion Protection of Copper

Electrochemical polymerization of tyramine was achieved on copper electrode surface from tyramine in 0.3 M oxalic acid (pH=1.2) solution by using cyclic voltammetry technique. The formation of polytyramine nanoparicles (PTN) were characterized by cyclic voltammetry (CV), fourier transform infrared‐attenuated total reflectance (FTIR‐ATR) spectroscopy and scanning electron microscopy (SEM). The corrosion behavior of PTN coated copper was investigated by means of the change of open circuit potential with exposure time (E_ocp t), electrochemical impedance spectroscopy (EIS) and anodic polarization curves in 3.5 % NaCl solutions at room temperature. The obtained results showed the shift of corrosion potential toward positive values for electropolymerized copper and a significant decrease in corrosion current and corrosion rate in comparison with bare copper, so that the PTNs coating could be used as an important protection against corrosion of copper.     

Electropolymerization,characterization and corrosion protection evolution of poly(4-aminomethyl-5-hydroxymethyl-2-methylpyridine-3-ol) on steel and copper

The electrochemical synthesis of poly(4-aminomethyl-5-hydroxymethyl-2-methyl pyridine-3-ol) on steel and copper electrodes was achieved in both sulfuric acid and oxalic acid by cyclic voltammetry technique. Characterization of the polymer films were achieved by Fourier transforms infrared spectroscopy technique (FTIR) and scanning electron microscope (SEM). Corrosion performance of coatings was investigated in 0.1 M H₂SO₄ by potentiodynamic polarization and electrochemical impedance (EIS) spectroscopy techniques.     

Synthesize,Characterization, and Corrosion Inhibition of Polypyrrole Thin Films on Copper

Polypyrrole (PPy) coatings were synthesized on copper by electrochemical polymerization of pyrrole monomer in aqueous acidic and basic solutions by cyclic voltammetry. The coatings were characterized with CV, UV-visible absorption spectroscopy, Fourier transform infrared (FT-IR) spectroscopy, and scanning electron microscopy (SEM) techniques. The corrosion protection aspects of PPy coatings have been investigated using the potentiodynamic polarization technique and electrochemical impedance spectroscopy (EIS). The potentiodynamic polarization measurements show that the PPy coating has ability to protect the copper against corrosion. It was concluded that a complete corrosion protective PPy film could not be obtained through direct electro-oxidation procedure. This may be due to copper dissolution in the monomer oxidation potential range.     

Properties of gold electrode modified with dimercaptosuccinic acid and electrochemical behavior of copper histidine complex

A self-assembled monolayer of meso-2,3-dimercaptosuccinic acid was prepared on the surface of gold disc electrode. The modified electrode was characterized using cyclic voltammetry in copper(II) solution and cyclic voltammetry and electrochemical impedance spectroscopy in the presence of potassium hexacyanoferrate( II)/(III) and hexaammineruthenium (II)/(III) chloride. Binding of copper(II) histidine complex (Cu–His) onto the electrode was successfully achieved for a wide range of tested concentrations, as shown with adsorption transfer stripping voltammetry. Electrode response (logΔI_p) was linearly proportional to logc(Cu–His) with correlation coefficient R³² = 0.9839.     

Direct Electrochemical Determination of Glyphosate at Copper Phthalocyanine/Multiwalled Carbon Nanotube Film Electrodes

A copper phthalocyanine/multiwalled carbon nanotube film‐modified glassy carbon electrode has been used for the determination of the herbicide glyphosate (Gly) at ?50 mV vs. SCE by electrochemical oxidation using differential pulse voltammetry (DPV). Cyclic voltammetry and electrochemical impedance spectroscopy showed that Gly is adsorbed on the metallic centre of the copper phthalocyanine molecule, with formation of Gly‐copper ion complexes. An analytical method was developed using DPV in pH 7.4 phosphate buffer solution, without any pretreatment steps: Gly was determined in the concentration range of 0.83–9.90 μmol L^?1, with detection limit 12.2 nmol L^?1 (2.02 μg L^?1).     

Characterization and anticorrosive properties of poly(2,3‐dimethylaniline)/nano‐Al2O3 composite synthesized by emulsion polymerization

Poly(2,3‐dimethylaniline)/nano‐Al₂O₃ composite (PAC) was synthesized by emulsion polymerization using dodecyl benzene sulfonic acid as emulsifier and dopant. The structure of PAC was characterized by Fourier fransformation infrared spectroscopy, UV–visible adsorption spectroscopy, and field emission scanning electron microscopy. The thermal stability was studied by thermogravimetric analysis, and the electrochemical performances were studied by cyclic voltammetry measurements. Epoxy coatings containing PAC and poly(2,3‐dimethylaniline) (P(2,3‐DMA)), respectively, were painted on steel, and accelerated immersion tests were performed to evaluate the anticorrosion property of the coatings in 3.5% NaCl solution. The results showed that the addition of PAC and P(2,3‐DMA) could improve the anticorrosion performance of epoxy coating significantly and the PAC coating had higher corrosion resistance than that of P(2,3‐DMA). Copyright © 2013 John Wiley & Sons, Ltd.     

Polyaniline coated conducting fabrics. Chemical and electrochemical characterization

Polyaniline coated conducting fabrics have been obtained by chemical oxidation of aniline by potassium peroxydisulfate on polyester fabrics. Two different acids have been employed to carry out the synthesis (HCl and H₂SO₄), obtaining the best results of conductivity with the latter one. The conducting fabrics have been characterized chemically by means of Fourier transform infrared spectroscopy with attenuated total reflection (FTIR-ATR), energy dispersive X-Ray (EDX) and X-ray photoelectron spectroscopy (XPS). The morphology of the coatings has been observed by means of scanning electron microscopy (SEM). The conducting properties of the fabrics have been measured by means of electrochemical impedance spectroscopy (EIS). The electrochemical characterization has been carried out by means of cyclic voltammetry (CV) and scanning electrochemical microscopy (SECM). The conducting fabrics have also shown electrochromic properties, changing its color from green yellowish at −1 V to dark green at +2 V. The durability of the coating has been evaluated by means of washing and rubbing fastness tests.     

铜氮杂配合物修饰金电极对抗坏血酸的分析测定

本实验制备了一种新型的氮杂铜配合物修饰金电极,该电极可用于抗坏血酸的测定。采用循环伏安法和扫描电化学显微镜技术对电极进行了表征。该修饰电极可催化氧化抗坏血酸,相对于裸电极抗坏血酸在修饰电极上氧化电位移动了250mV,并且氧化电流在抗坏血酸的浓度为5.0×10−7 to 4.0×10−5 mol/L时呈线性关系,检测限为4.8×10-8 mol/L。用此方法测定抗坏血酸与文献报道的测定结果一致,这表明该电极可用作抗坏血酸测定的电化学传感器。     

Copper nanoclusters conjugated silica nanoparticles modified on carbon paste as an electrochemical sensor for the determination of dopamine

An electrochemical sensor based on modification of carbon paste electrode by glutathione‐capped copper nanoclusters silica nanoparticles (CuNCs/SiO₂NPs) composite for determination of dopamine in the presence of ascorbic acid was presented. Transmission electron microscopy, scanning electron microscopy, energy dispersive X‐Ray analysis, X‐ray photoelectron spectroscopy, Fourier‐transform infrared spectroscopy, X‐ray diffraction and electrochemical impedance spectroscopy were used for characterization of the developed electrode. The electrochemical behavior of dopamine on CuNCs/SiO₂NPs/carbon paste electrode was investigated by cyclic voltammetry and differential pulse voltammetry. Dopamine was determined in the range of 10.0 – 900.0 μM, and the limit of detection was obtained as 0.43 μM. The electrochemical behaviors of the coexisting electroactive species, which often cause interference with the determination of dopamine, were investigated. The results show that the developed electrode does not show any interference with respect to coexisting species, even in the presence of ascorbic acid. The developed electrochemical sensor was further employed for the determination of dopamine in human blood plasma, with a good recovery.     

Effect of TiO2–Ti and TiO2–TiN composite coatings on corrosion behavior of NiTi alloy

Two kinds of biocompatible coatings were produced in order to improve the corrosion resistance of nickel titanium (NiTi) alloy. A titanium oxide–titanium (TiO₂–Ti) composite was coated on NiTi alloy using electrophoretic method. After the coating process, the samples were heat‐treated at 1000 °C in two tube furnaces, the first one in argon atmosphere and the second one in nitrogen atmosphere at 1000 °C. The morphology and phase analysis of coatings were investigated using scanning electron microscopy and X‐ray diffraction analysis, respectively. The electrochemical behavior of the NiTi and coated samples was examined using polarization and electrochemical impedance spectroscopy tests. Electrochemical tests in simulated body fluid demonstrated a considerable increase in corrosion resistance of composite‐coated NiTi specimens compared to the non‐coated one. The heat‐treated composite coating sample in nitrogen atmosphere had a higher level of corrosion resistance compared to the heat‐treated sample in argon atmosphere, which is mainly due to having nitride phases. Copyright © 2014 John Wiley & Sons, Ltd.     

Preparation of activated carbon from polyaniline by zinc chloride activation as supercapacitor electrodes

Activated carbon for supercapacitor electrode was prepared from polyaniline using chemical activation with ZnCl₂. The morphology, surface chemical composition, and surface area of the as-prepared carbon materials were investigated by scanning electron microscope, atomic force microscopy, X-ray photoelectron spectroscopy, and Brunauer–Emmett–Teller measurement, respectively. Electrochemical characteristics were evaluated by cyclic voltammograms, galvanostatic charge/discharge, and electrochemical impedance spectroscopy tests in 6.0?mol?L^?? KOH aqueous solution. The electrochemical measurements showed that ZnCl₂ activation led to better capacitive performances. The activated carbon presented a high-specific gravimetric capacitance of 174?F?g^??, with rectangular cyclic voltammetry curves at a scan rate of 2?mV?s^??, and it remained 93% even at a high scan rate of 50?mV?s^??. These demonstrated that activated carbon would be a promising electrode material for supercapacitors.     

Electrochemical Characterization of Self‐Assembled Monolayer of a Novel Manganese Tetrabenzylthio‐Substituted Phthalocyanine and Its Use in Nitrite Oxidation

Manganese phthalocyanine MnPc(SPh)₄ has been synthesized and used to form self assembled monolayers on gold electrodes. The well packed SAM monolayer was characterized by analyzing the blocking of a number of Faradic processes by cyclic voltammetry, evaluating the electrical characteristics of the modified electrode by electrochemical impedance and imaging the modified surface by electrochemical scanning microscopy. Finally, MnPc(SPh)₄‐SAM modified electrode displayed an electrocatalytic behavior toward the oxidation of nitrite.     

Determination of Paracetamol Based on 3-Amino-4H-1,2,4-triazole Coated Glassy Carbon Surface in Pharmaceutical Sample

In this present study, to determine paracetamol, an electroanalytical method is presented using differential pulse voltammetry (DPV) at 3-amino-4H-1,2,4-triazole (3AT) coated glassy carbon (GC) electrode. The electrochemical characterization and electron transfer behavior of this prepared electrode in the mixture of K₄[Fe(CN)₆]/K₃[Fe(CN)₆] contains 0.1 M KCl was confirmed by using cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) methods. Furthermore, scanning electron microscopy (SEM) was used to observe morphological structures of the bare and modified surfaces. The effect of pH was studied on the redox reaction of paracetamol in phosphate buffer in the range of pH 3.0–9.0. The limit of detection was 0.043 μM (3 s/m) for 3AT-GC electrode. The developed electrode was successfully utilized in pharmaceutical samples.     

碱性介质中 (氢) 氧化铜修饰电极电催化氧化蔗糖

 A stable copper (hydr)oxide-modified electrode was prepared in 0.5 mol/L NaOH solution by cyclic voltammetry in the range of -250 to 1 000 mV. It can be used for electrochemical studies in the range of -250 to 1 000 mV without interfering peaks because there is no oxidation of copper. During an anodic potential sweep, the electro-oxidation of saccharose on Cu occurred by the formation of Cu^III and this reaction also occurred in the early stages of the reversed cycle until it is stopped by the negative potentials. A mechanism based on the electro-chemical generation of Cu^III active sites and their subsequent consumption by saccharose was proposed, and the rate law and kinetic parameters were obtained. The charge transfer resistance from theoretical and impedance studies was used to verify the mechanism. Under chronoamperometry regimes, the reaction followed Cottrellian behavior. The transfer of up to 21 electrons was observed in further investigations of the electro-oxidation of saccharose on a (hydr)oxide Cu rotating disk electrode.     

Single step modification of copper electrode for the highly sensitive and selective non-enzymatic determination of glucose

A non-enzymatic sensor was developed for the determination of glucose in alkaline medium by anodisation of copper in sodium potassium tartrate solution. The morphology of the modified copper electrode was studied by scanning electron microscopy, and its electrochemical behavior by cyclic voltammetry and electrochemical impedance spectroscopy. The electrode enables direct electrocatalytic oxidation of glucose on a CuO/Cu electrode at 0.7 V in 0.1 M sodium hydroxide. At this potential, the sensor is highly selective to glucose even in the presence of ascorbic acid, uric acid, or dopamine which are common interfering species. The sensor displays a sensitivity of 761.9 μA mM^?1 cm^?2, a linear detection range from 2 μM to 20 mM, a response time of <1 s, and a detection limit of 1 μM (S/N = 3). It was tested for determination of glucose level in blood serum.     

用于可充锂电池的高倍率磷酸铁(II)锂正极材料

本文以聚氧化乙烯为碳源,用柠檬酸辅助湿化学法合成了高倍率的碳包覆的LiFePO₄。使用热重、粉末X射线衍射、扫描电子显微镜、透射电子显微镜、循环伏安、电化学阻抗和恒流充放电表征材料的结构和电化学性质。结果表明,该材料组成为5 wt%疏松多孔的碳包覆相纯度很高的小的LiFePO₄颗粒。该材料适用于高倍率充放电,在5 C、10 C和20C的放电倍率下可以分别得到120、90和60 mAh·g^-1的稳定容量。     

Copper hexacyanoferrate multilayer films on glassy carbon electrode modified with 4-aminobenzoic acid in aqueous solution

4-Aminobenzoic acid (4-ABA) was covalently grafted on a glassy carbon electrode (GCE) by amine cation radical formation during the electrooxidation process in 0.1 M KCl aqueous solution. X-ray photoelectron spectroscopy (XPS) measurement proves the presence of 4-carboxylphenylamine on the GCE. Electron transfer processes of Fe(CN)₆³⁻ in solutions of various pHs at the modified electrode are studied by both cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). Changing the solution pH would result in the variation of the terminal group's charge state, based on which the surface pK_a values were estimated. The copper hexacyanoferrate (CuHCF) multilayer films were formed on 4-ABA/GCE prepared in aqueous solution, and which exhibit good electrochemical behavior with high stability.     

L‐Cysteine Voltammetry at a Carbon Paste Electrode Bulk‐Modified with Ferrocenedicarboxylic Acid

The electrochemical behavior of L ‐cysteine studied at the surface of ferrocenedicarboxylic acid modified carbon paste electrode (FDCMCPE) in aqueous media using cyclic voltammetry, differential pulse voltammetry and double potential step chronoamperometry. It has been found that under optimum condition (pH 8.00) in cyclic voltammetry, the oxidation of L ‐cysteine occurs at a potential about 200 mV less positive than that of an unmodified carbon paste electrode. The kinetic parameters such as electron transfer coefficient, α, and catalytic reaction rate constant, k_h were also determined using electrochemical approaches. The electrocatalytic oxidation peak current of L ‐cysteine showed a linear dependent on the L ‐cysteine concentration and linear analytical curves were obtained in the ranges of 3.0×10^?5 M–2.2×10^?3 M and 1.5×10^?5 M–3.2×10^?3 M of L ‐cysteine concentration with cyclic voltammetry (CV) and differential pulse voltammetry (DPV) methods respectively. The detection limits (3σ) were determined as 2.6×10^?5 M and 1.4×10^?6 M by CV and DPV methods.     

MWCNTs/metal (Ni, Co, Fe) oxide nanocomposite as potential material for supercapacitors application in acidic and neutral media

Supercapacitive properties of synthesised metal oxides nanoparticles (MO where M = Ni, Co, Fe) integrated with multi-wall carbon nanotubes (MWCNT) on basal plane pyrolytic graphite electrode (BPPGE) were investigated. Successful modification of the electrode with the MWCNT-MO nanocomposite was confirmed with spectroscopic and microscopic techniques. Supercapacitive properties of the modified electrodes in sulphuric acid (H₂SO₄) and sodium sulphate (Na₂SO₄) electrolytes were investigated using cyclic voltammetry, electrochemical impedance spectroscopy and galvanostatic constant current charge–discharge (CD) techniques. The specific capacitance values followed similar trend with that of the cyclic voltammetry and the electrochemical impedance experiments and are slightly lower than values obtained using the galvanostatic charge–discharge cycling. MWCNT-NiO-based electrode gave best specific capacitance of 433.8 mF?cm^?2 (ca 2,119 F?g^?1) in H₂SO₄. The electrode exhibited high electrochemical reproducibility with no significant changes over 1,000 cyclic voltammetry cycles.     

Electrocatalytic Behavior of Glassy Carbon Electrodes Modified with Multiwalled Carbon Nanotubes and Cobalt Phthalocyanine for Selective Analysis of Dopamine in Presence of Ascorbic Acid

This work describes the development, electrochemical characterization and utilization of a cobalt phthalocyanine modified carbon nanotube electrode for the quantitative determination of dopamine in 0.2 mol L^?1 phosphate buffer contaminated with high concentration of ascorbic acid. The electrode surface was analyzed by cyclic voltammetry and electrochemical impedance spectroscopy which showed a modified surface presenting a charge transfer resistance of 500 Ω, against the 16.46 kΩ value found for the bare glassy carbon surface. A pseudo rate constant value of 5.4×10^?4 cm s^?1 for dopamine oxidation was calculated. Voltammetric experiments showed a shift of the peak potential of DA oxidation to less positive value at 390 mV as compared with that of a bare GC electrode at 570 mV. The electrochemical determination of dopamine, in presence of ascorbic acid in concentrations up to 0.1 mol L^?1 by differential pulse voltammetry, yielded a detection limit as low as 2.56×10^?7 mol L^?1.