Water solubility and octanol/water-partitioning of hydrophobic chlorinated organic substances determined by using SPME/GC

The critical step in the determination of water solubilitiy (S _w) and octanol-water partition coefficient (K _ow) of hydrophobic organic chemicals by using the generator-column technique and the slow-stirring procedure, respectively, is the exact quantification of the low water-phase concentrations of the substances under investigation. We have tested the applicability of solid-phase microextraction (SPME) and gas chromatography with seven chlorinated organic compounds. The substances cover a S _w range from 500 mg/L to 7 ng/L and a log K _ow range from 3 to 8. The results show that SPME can be a valuable alternative to common preconcentration techniques in the quantification of hydrophobic organics in pure and octanol-saturated water. The apparent SPME distribution constants K _SPME (obtained with the 100 μm-PDMS fiber for analyte’s partitioning between fiber coating and aqueous sample) do not correlate directly with octanol/water partition coefficients and thus cannot be recommended as a surrogate parameter for K _ow. Received: 15 January 1997 / Revised: 2 May 1997 / Accepted: 8 May 1997     

Determination of distribution coefficients of polycyclic aromatic nitrogen heterocycles using solid-phase microextraction

The possibility and the efficiency of solid-phase microextraction (SPME) for determination of distribution coefficients of polycyclic aromatic nitrogen heterocycles (PANHs) in aqueous samples are presented in this study. Influence of sample extraction conditions, extraction time, stirring rate, pH, salinity and temperature were tested to optimize extraction efficiency. Three types of fibre sorbent layers, PDMS, PDMS/DVB and PA, were tested and fibre/water distribution coefficients, K_{f s} , were calculated. The extraction efficiency for PANHs increased in the order PDMS?<?PA?<?PDMS/DVB. Values of log?K_fs ranged from 0.2 to 2.7 for PDMS, from 0.4 to 3.6 for PA and from 1.4 to 4.4 for PDMS/DVB. The values of log?K_fs were correlated with octanol/water distribution coefficients log?K_ow . The relationship between log?K_fs and log?K_ow shows linear response with regression coefficient in the range of 0.985 and 0.997.     

Water solubility and octanol/water-partitioning of hydrophobic chlorinated organic substances determined by using SPME/GC

The critical step in the determination of water solubilitiy (S _w) and octanol-water partition coefficient (K _ow) of hydrophobic organic chemicals by using the generator-column technique and the slow-stirring procedure, respectively, is the exact quantification of the low water-phase concentrations of the substances under investigation. We have tested the applicability of solid-phase microextraction (SPME) and gas chromatography with seven chlorinated organic compounds. The substances cover a S _w range from 500 mg/L to 7 ng/L and a log K _ow range from 3 to 8. The results show that SPME can be a valuable alternative to common preconcentration techniques in the quantification of hydrophobic organics in pure and octanol-saturated water. The apparent SPME distribution constants K _SPME (obtained with the 100 μm-PDMS fiber for analyte’s partitioning between fiber coating and aqueous sample) do not correlate directly with octanol/water partition coefficients and thus cannot be recommended as a surrogate parameter for K _ow.     

Assessment of Centrifugal Partition Chromatography for Determination of Octanol-Water Partition Coefficients

Abstract

Centrifugal partition chromatography (CPC) has been assessed as a convenient automated method for the determination of octanol-water partition coefficients (K_OW) over the range of -0.5 to 2.5 log units. The stationary (V_s) and mobile phase (V_m) volumes, which are needed for the calculation of K_ow, are determined in situ by injecting four compounds with known K_ow. V3 and V_m were also determined by independent analytical means to demonstrate that this is a direct measurement of K_ow from fundamental chromatographic principles with no unexplained fitted parameters. Propagation of error shows that a single four-component calibration with duplicate injections of each unknown is sufficient to determine log K_ow with a precision of less than 0.1 log units.     

Structure-Toxicity Relationships for Aminoalkanols: A Comparison with Alkanols and Alkanamines

Abstract

The relative toxicity (logIGC^?1 ₅₀) of 49 selected aliphatic amines and aminoalkanols was evaluated in the static Tetrahymena pyriformis population growth impairment assay. Excess toxicity, indicated by potency greater than predicted for non-polar narcotic alkanols, was associated with both classes of test chemicals. Moreover, the aminoalkanols were found to be more toxic than the corresponding alkanamines. A high quality 1-octanol/water partition coefficient (log K _ow) dependent quantitative structure-activity relationship (QSAR), logIGC^?1 ₅₀ = 0.78 (log K _ow)-1.42; r ² = 0.934, was developed for alkanamines. This QSAR represented the amine narcosis mechanism of toxic action. No quality QSAR was developed for the aminoalkanols. However, several structure-toxicity features were observed for this class of chemicals. Two-amino-1-hydroxy derivatives being more toxic than the corresponding derivatives, where the amino and hydroxy moieties were separated by methylene groups. Hydrocarbon branching next to the amino moiety resulted in decreased toxicity. Aminoalkanol alters lipid metabolism in T. pyriformis.     

Predicting 1-octanol-water partition coefficient by high-performance liquid chromatography gradient elution

The method to predict 1-octanol-water partition coefficients (K _ow) from capacity factors (k) obtained by Reversed-Phase High-Performance Liquid Chromatography (RP-HPLC) has been extended to use gradient elution rather than isocratic elution. The mobile phase has been changed either linearly or exponentially with time. The initial composition of the mobile phase and its rate of change affected the log K _ow versus log k relation. This relation was exponential in linear gradient experiments. For non-linear gradient elution in which the water fraction of the mobile phase decreased exponentially from 100% to approach 0% asymptotically, a physically-based equation describing the dependence of log K _ow on log k has been derived. Without any preliminary estimation, RP-HPLC gradient elution allows a precise prediction of log K _ow over a range of nearly six orders of magnitude.     

Reversed phase liquid chromatography of PCBs as a basis for the calculation of water solubility and log Kow for polychlorobiphenyls

Summary Water solubility (S _w) and log K _ow values have been determined for 154 possible polychlorobiphenyls using the retention indices obtained by RP-HPLC and structurally selected PCB congeners with known log K _ow values for the regression lines. The water solubility data are melting point corrected.

---

Umkehrphasen-Flüssig-Chromatographie von PCBs als Grundlage zur Berechnung der Wasserlöslichkeit und des log K _ow für Polychlorbiphenyle

---

Dedicated to Prof. Dr. W. Fresenius on the occasion of his 75th birthday     

A Novel QSAR Approach for Estimating Toxicity of Phenols

Abstract

Toxicity values (log IGC^?1 ₅₀) for 60 phenols tested in the 2-d static population growth inhibition assay with the ciliate Tetrahymena pyriformis were tabulated. Each chemical was selected so the series formed uniform coverage of the hydrophobicity/ionization surface. A high quality hydrophobicity-dependent (log K _ow) structure-toxicity relationship (log IGC^?1 ₅₀ = 0.741 (log K_ow) ?1.433; n = 17; r² = 0.970; s = 0.134; F = 486.55; Pr > F = 0.0001) was developed for phenols with pK_a values > 9.8. Similarly, separate hydrophobicity-dependent relationships were developed for phenols with pK_a values of 4.0, 5.1, 6.3, 7.5, and 8.7. Comparisons of intercepts and slopes, respectively, revealed phenols with pK_a values of 6.3 to be the most toxic and the least influenced by hydrophobicity. These relationships were reversed for the more acidic and basic phenols. Plots of toxicity versus pK_a for nitro-substituted phenols and phenols with log K_ow values of either 1.75 or 2.50 further demonstrated bilinearity between toxicity and ionization. In an effort to more accurately model the relationship between toxicity and ionization, the absolute value function |6.3-pK_a| was used to model ionization affects for derivatives with pK_a values between 0 and 9.8. For derivatives with pK_a value > 9.8, a value of 3.50 was used to quantitate ionization effects. The use of log K_ow in conjunction with this modified pK_a (ΔpK_a) resulted in the structure-toxicity relationship (log IGC^?1 ₅₀ = 0.567 (log K_ow)-0.226 (ΔpK_a-0.079; n = 54; r² = 0.926; s = 0.215; F = 321.06; Pr > F = 0.0001). Derivatives with a nitro group in the 4-position typically did not model well with the above equation.     

Quantitative Relationships of Structure-Activity and Volume Fraction For Selected Nonpolar and Polar Narcotic Chemicals

Abstract

The relative toxicity of selected industrial organic chemicals was secured from the literature for the static 48-h Tetrahymena pyriformis 50% population growth impairment and the flow-through 96-h Pimephales promelas 50% mortality endpoints. Chemicals were selected to represent the nonpolar narcosis (aliphatic alcohols and aliphatic ketones) and polar narcosis (anilines and phenols) mechanisms of toxic action. molar volume (MV) and 1-octanol/water partition coefficient (log K _ow) data were generated for each chemical. High-quality, log K _ow dependent quantitative structure-activity relationships were observed for each chemical class and mechanism of action for both endpoints. The volume fraction (V _t) for each chemical in the target phase was determined from the toxicant concentration in the water (toxicity data), the MV, and the target/water partition coefficient (K _tw) with K _tw considered equal to K _ow ^(1-a). Analyses of target sites, by way of “a” revealed that “a” was constant for a mechanism of action regardless of chemical class, but distinct for a given test system. Mean V _t was constant for each mechanism of action regardless of chemical class or test system. These results suggest, at least for reversible physical mechanisms, that volume fraction analyses are significant in determining the mechanism of toxic action of a chemical.     

Structural Properties Governing Retention Mechanisms on Immobilized Artificial Membrane (IAM) HPLC Columns

The aims of this study were to investigate whether three commercially available immobilized artificial membrane (IAM) HPLC columns yield collinear data for neutral compounds, and whether IAM scales are distinct from the log P_oct (partition coefficient in the octanol/H₂O system) scale. With these objectives, the retention mechanisms on the IAM HPLC columns were analysed by linear solvation free‐energy relationships (LSERs). A set of 68 neutral model compounds with known solvatochromic parameters and log P_oct values was investigated, allowing a regular and broad exploration of property space. The resulting solvatochromic equations clearly indicate that the three IAM stationary phases retain small neutral solutes by a balance of intermolecular forces closely resembling those underlying partitioning in octanol/H₂O and retention on a reversed‐phase LC‐ABZ HPLC column. For all systems, the solute's size and hydrogen‐bond‐acceptor basicity are the two predominant factors, whereas dipolarity/polarisability and hydrogen‐bond‐donor acidity play only minor roles.     

Dependence of the distribution constant in liquid–liquid partition equilibria on the van der Waals molecular surface area

The direct calculation of free energy of interactions between a solute j and two immiscible liquids shows a linear dependence between the (logarithm of) the distribution constant in liquid–liquid partition equilibrium log K_j and the van der Waals surface area of the solute. The study provides a thermodynamic proof for the formula log K_BA,j = c₁ log K_BC,j + c₂ that describes the linear dependence between (the logarithm of) the distribution constant for a solute j in a solvent system (B/A) and (the logarithm of) the distribution constant for the same solute in a different solvent system (B/C). This relation has been well proven by various experimental studies and it is frequently used in liquid chromatographic separations as well as in liquid–liquid extractions, but was not explained previously based on thermodynamic results. The theory was verified using the prediction of octanol/water distribution constants log K_ow for a wide range of molecules, including hydrocarbons and compounds with a variety of functional groups. The results have also been verified for the distribution constants in other solvent systems. The expression for the distribution constant obtained in this study also gives a theoretical base for the additive fragment methodology used for the prediction of log K_ow.     

Sorption and partitioning parameters of benzotriazole compounds

Benzotriazole compounds have major commercial applications as anticorrosive agents in automotive antifreeze and airplane deicer fluids. This study assesses the sorption of benzotriazole (BT), 5-methylbenzotriazole (MBT), and 5-chlorobenzotriazole (CBT) from aqueous solutions to four top soils. The concentration range of 10-500 mg l⁻¹ was used with soils differing in total organic carbon content from 0.27 to 1.72%. Batch systems facilitated the equilibrium sorption with analysis by HPLC. The sorption of these compounds was as much as 60% by mass to a soil with 0.33% Org. C. The log octanol-water partition coefficients (log K_ow) were determined to be 1.23 for BT, 1.89 for MBT, and 2.17 for CBT. The relationship between the log of the sorption partition coefficient, log K_oc and log K_ow differed from previous correlations because hydrophobicity was not the only factor affecting sorption. These compounds have substantial permanent dipole moments as well as being hydrophobic. At high pH where CBT molecules approach their pK_a, sorption was approximately 50% less (by mass) than that of relatively non-ionized CBT molecules.     

Nonlinear Dependence of Bioconcentration Factors on n-Octanol-Water Partition Coefficients of Chlorinated Dibenzofurans and Dibenzo-p-Dioxins

Abstract

A nonlinear thermodynamic model is applied to the prediction of both the bioconcentration factor (K_bw) in the guppy (Poecilia reticulata) and the n-octanol-water partition coefficient (K_ow) of chlorinated dibenzofurans and dibenzo-p-dioxins. To this end molar liquid volumes, heats of vaporization and empirically fitted parameters of the pertinent solute and solvents are used. Calculated log K_bw and log K_ow values are obtained with correlation coefficients (r = 0.85 and 0.992) and mean deviations (< dev > = 0.19 and 0.17), which compare favourably with experimental data.

In addition the model enables an explanation of the well-known nonlinear log-log relationship between the two properties for compounds with high K_ow values on the basis of differences between the properties of biotic lipid and n-octanol. It is suggested that the breakdown of the linear relationship is caused by entropic effects related to the number of chlorine atoms in the solute molecules and to the structures of the lipid and n-octanol.     

Determination of the n‐octanol/water partition coefficients of weakly ionizable basic compounds by reversed‐phase high‐performance liquid chromatography with neutral model compounds

A strategy to utilize neutral model compounds for lipophilicity measurement of ionizable basic compounds by reversed‐phase high‐performance liquid chromatography is proposed in this paper. The applicability of the novel protocol was justified by theoretical derivation. Meanwhile, the linear relationships between logarithm of apparent n‐octanol/water partition coefficients (logK_ow′′) and logarithm of retention factors corresponding to the 100% aqueous fraction of mobile phase (logk_w) were established for a basic training set, a neutral training set and a mixed training set of these two. As proved in theory, the good linearity and external validation results indicated that the logK_ow′′–logk_w relationships obtained from a neutral model training set were always reliable regardless of mobile phase pH. Afterwards, the above relationships were adopted to determine the logK_ow of harmaline, a weakly dissociable alkaloid. As far as we know, this is the first report on experimental logK_ow data for harmaline (logK_ow = 2.28 ± 0.08). Introducing neutral compounds into a basic model training set or using neutral model compounds alone is recommended to measure the lipophilicity of weakly ionizable basic compounds especially those with high hydrophobicity for the advantages of more suitable model compound choices and convenient mobile phase pH control.     

Retention prediction and hydrophobicity estimation of weak acidic compounds by reversed-phase liquid chromatography using acetic and perchloric acids as ion suppressors

Simple acids are usually applied to suppress the ionization of weakly ionizable acidic analytes in reversed-phase liquid chromatography. The purpose of this study is to investigate the retention behavior of various weak acidic compounds (monoprotic, diprotic, triprotic, and tetraprotic acids) using acetic or perchloric acid as ion suppressor in a binary hydroorganic mobile phase. The apparent n-octanol–water partition coefficient (K _ow ″) was proposed to calibrate the n-octanol–water partition coefficient (K _ow) of weak acidic compound. LogK _ow ″ was found to have a better linear correlation with logk _w, the logarithm of the retention factor obtained by extrapolating to neat aqueous fraction of the mobile phase, for all weakly ionizable acidic compounds. This straightforward relationship offers a potential medium for direct measurement of K _ow data of weak acidic analytes and can be used to predict retention behavior of these compounds in the ion suppression reversed-phase liquid chromatographic mode.     

Anion Recognition with Hydrogen‐Bonding Cyclodiphosphazanes

Modular cyclodiphosph(V)azanes are synthesised and their affinity for chloride and actetate anions were compared to those of a bisaryl urea derivative ( 1 ). The diamidocyclodiphosph(V)azanes cis‐[{ArNHP(O)(μ‐tBu)}₂] [Ar=Ph ( 2 ) and Ar=m‐(CF₃)₂Ph ( 3 )] were synthesised by reaction of [{ClP(μ‐NtBu)}₂] ( 4 ) with the respective anilines and subsequent oxidation with H₂O₂. Phosphazanes 2 and 3 were obtained as the cis isomers and were characterised by multinuclear NMR spectroscopy, FTIR spectroscopy, HRMS and single‐crystal X‐ray diffraction. The cyclodiphosphazanes 2 and 3 readily co‐crystallise with donor solvents such as MeOH, EtOH and DMSO through bidentate hydrogen bonding, as shown in the X‐ray analyses. Cyclodiphosphazane 3 showed a remarkably high affinity (log[K]=5.42) for chloride compared with the bisaryl urea derivative 1 (log[K]=4.25). The affinities for acetate (AcO^?) are in the same range ( 3 : log[K]=6.72, 1 : log[K]=6.91). Cyclodiphosphazane 2 , which does not contain CF₃ groups, exhibits weaker binding to chloride (log[K]=3.95) and acetate (log[K]=4.49). DFT computations and X‐ray analyses indicate that a squaramide‐like hydrogen‐bond directionality and C_α?H interactions account for the efficiency of 3 as an anion receptor. The C_α?H groups stabilise the Z,Z‐ 3 conformation, which is necessary for bidentate hydrogen bonding, as well as coordinating with the anion.     

An Efficient Aerobic Oxidation for p-Xylene to p-Toluic Acid using Azacrown Ether-tethered Mn(III) Schiff Base Complexes as Catalysts

The oxidation of p-xylene to p-toluic acid with air at 110°C under normal atmospheric pressure occurs efficiently in the presence of crown Mn(III) Schiff base complexes [Formula: See Text] (n=1-4). Significant conversion levels (up to 75%) and selectivity (up to 92-96%) are obtained; the effect of the azacrown ether pendants in Mn(III) Schiff base complexes on the oxidation of p-xylene are also investigated by comparison with the crown-free analogues [Formula: See Text] Moreover, addition of alkali metal ions accelerates the rate of conversion of p-xylene to p-toluic acid.