Potentiometric Ag+ Sensors Based on Conducting Polymers: A Comparison between Poly(3,4‐ethylenedioxythiophene) and Polypyrrole Doped with Sulfonated Calixarenes

Potentiometric Ag⁺ sensors were prepared by galvanostatic electropolymerization of 3,4‐ethylenedioxythiophene (EDOT) and pyrrole (Py) on glassy carbon electrodes by using sulfonated calixarenes as doping ions. Poly(3,4‐ethylenedioxythiophene) (PEDOT) and polypyrrole (PPy) doped with p‐sulfonic calix[4]arene (C4S), p‐sulfonic calix[6]arene (C6S) and p‐sulfonic calix[8]arene (C8S) were compared. PEDOT and PPy doped with poly(styrene sulfonate) (PSS) were also included for comparison. The analytical performance of the conducting polymer‐based Ag⁺ sensors was studied by potentiometric measurements. All conducting polymer and dopant combinations showed sensitivity and selectivity to Ag⁺ compared to several alkali, alkaline‐earth, and transition‐metal cations. The type of the conducting polymer used for the fabrication of the electrodes was found to have a more significant effect on the selectivity of the electrodes to Ag⁺ than the ring size of the sulfonated calixarenes used as dopants. Selected conducting polymer‐based sensors were studied by cyclic voltammetry (CV) and energy dispersive analysis of X‐rays (EDAX) measurements. Results from the EDAX measurements show that both PEDOT‐ and PPy‐based membranes accumulate silver.     

Preparation of Calix[4]arene Alkylamine Derivatives by Mannich Reaction and use as Phase-Transfer Catalysts for Esterification Reaction

In this study, 5,11,17,23-tetrakis[(N-ethylpiperazine)methyl]-25,26,27,28-tetrahydroxycalix[4]arene (3) and 5,11,17,23-tetrakis[(4-carboethoxy-N-piperidino) methyl]-25,26,27,28-tetrahydroxycalix[4]arene (4) were synthesized in one step according to the Mannich reaction by the treatment of calix[4]arene with a secondary amine (N-ethylpiperazine, ethyl-4-piperidincarboxylate) and formaldehyde. The calix[4]arene derivatives (3, 4) were characterized by a combination of FTIR, ¹H NMR and elemental analyses. The synthesized compounds were used in an esterification reaction as the phase transfer catalyst. The catalytic efficiency of the calix[4]arenes 3 and 4 was evaluated by carrying out the ester-forming reaction of alkali metal carboxylates (sodium butyrate or sodium caprylate) with p-nitrobenzyl bromide. It was observed that the ester-forming reaction of alkali metal carboxylates with p-nitrobenzyl bromide, using calix[4]arene-based catalyst 3 as a phase-transfer catalyst in dichloromethan, provided the best yields.     

Salt-Bridge Supported Bilayer Lipid Membrane Modified with Calix[n]arenes as Alkali Cation Sensors

ABSTRACT

Potentiometric behaviors of a salt-bridge supported bilayer lipid membrane (Sb-BLM) modified with Calix[n]arene (n=4, 6, 8) derivatives are described for some alkali metal ions. The modified Sb-BLM was used as an alkali cation sensor. The membrane potentials were observed to generate Nernstian responses to the concentration of alkali metal ions in electrolyte. The Sb-BLM modified with the calix[n]arenes show high selectivity for individual alkali metal ions: Calix[8]arenes for K⁺, calix[6]arenes for Cs⁺ Calix[4]arenes show no selectivity for any alkali ions. The interacting mechanism is also discussed.     

Synthesis of nucleobase-calix[4]arenes via click chemistry and evaluation of their complexation with alkali metal ions and molecular assembly

In this study, calix[4]arene derivatives (11–14) bearing a single nucleobase (adenine, thymine, cytosine or guanine) were synthesised via click chemistry. The complexation ability of the synthesised derivatives with alkali metal ions was measured using MALDI-TOF mass spectrometry, and their molecular assembly in CDCl₃ was determined using ¹H NMR. Calix[4]arene derivatives (11–14) formed 1:1 complexes with all alkali metal ions and the rank order for the complexation selectivity was Rb⁺ > Cs⁺ > K⁺ ? Na⁺ > Li⁺. The attachment of nucleobase at the upper rim of calix[4]arene had little effect on its complexation selectivity for alkali metal ions. Thymine-, adenine- and guanine-calix[4]arenes formed self-assembled structures in CDCl₃ via base–base interactions. In addition, adenine-calix[4]arene (11) bound to thymine-calix[4]arene (12) to form a discrete species via Hoogsteen hydrogen bonding.     

para‐Sulfonated Calixarenes Used as Synthetic Receptors for Complexing Photolabile Cholinergic Ligand

The water‐soluble tetra‐, hexa‐ and octasulfonated calix[4]arenes, calix[6]arenes, and calix[8]arenes 1 – 3 , respectively, were investigated as potential synthetic receptors for photolabile cholinergic ligand A , a photolytic precursor of choline. Ligand A is a bifunctional molecule carrying a photolabile 2‐nitrobenzyl group at one end and a choline moiety at the other end. Results from NMR studies have shown that calixarenes 1 – 3 form stable 1 : 1 complexes with A , having similar binding potential to that observed with the cholinergic enzymes acetylcholinesterase and butyrylcholinesterase. Further studies have suggested that calix[8]arene forms a ditopic complex by binding concomitantly to both the cationic choline moiety and the aromatic photolabile group of A , whereas calix[4]arene and calix[6]arene form monotopic complexes with A . The ditopic complex between calix[8]arene and A results from mutually induced fitting process, while the monotopic complexes between calix[4]arene and A can be regulated by pH: at neutral pH, calix[4]arene specifically binds the cationic choline moiety, while, at acidic pH, it complexes unselectively both the cationic choline moiety and the aromatic group of A . Our results show that para‐sulfonated calixarenes are versatile artificial receptors which bind in various ways to the bifunctional photolabile cholinergic ligand A , depending on their size, geometry, and state of protonation.     

Cation- and anion-assisted binding of triethylenediamine by zinc bisporphyrinates

The complexation of zinc calix[4]arene or calix[4]pyrrole bisporphyrinates with alkali metal cations, halide anions, and triethylenediamine was studied by ¹H NMR spectroscopy. It was established that the binding of molecules and/or charged particles by various fragments of calix[4]arene and calix[4]pyrrole porphyrins are interrelated processes. This makes it possible to use one process (for example, complexation of the calix[4]arene fragment of the macrocycle with alkali metal cations or complexation of the calix[4]pyrrole fragment with halide ions) as a tool for controlling another process (complexation of the porphyrin fragments of the macrocycle with neutral molecules).     

New artificial receptors from selectively functionalized calix[4]arenes

Abstract

The development of new synthetic methods for the monoalkylation of calix[4]arenes at the lower rim allows the synthesis of a new class of trihydroxamate siderophores. Three chelating hydroxamic acid units are introduced through a sequence of reactions which blocks the macrocycle in the cone conformation. The new ligands obtained form neutral 1:1 complexes (FeL) with iron (III), which are stable in EtOH/H₂O 9:1 at pH 2–7. Calix[4]arene bis-crown ethers are prepared by exploiting the selective 1,2-(proximal) functionalization of calix[4]arenes at the lower rim. These ligands are, however, less effective in complexing alkali metal cations compared with the 1,3-calix[4]arene crown-ethers which, in their partial cone structure, offer a better shielding for the complexed cations. Rigid upper rim-bridged calix[4]arenes potentially useful for the inclusion of neutral molecules are prepared by exploiting the selective 1,3-diformylation of calix[4]arene at the upper rim. Finally a new chloromethylation method for calix[4]arenes blocked in the cone conformation is described together with the synthesis of new cavitands.     

Terpyridine-Functionalized Calixarenes: Synthesis,Characterization and Anion Sensing Applications

Lanthanide complexes have been developed and are reported herein. These complexes were derived from a terpyridine-functionalized calix[4]arene ligand, chelated with Tb³⁺ and Eu³⁺. Synthesis of these complexes was achieved in two steps from a calix[4]arene derivative: (1) amide coupling of a calix[4]arene bearing carboxylic acid functionalities and (2) metallation with a lanthanide triflate salt. The ligand and its complexes were characterized by NMR (¹H and ¹³C), fluorescence and UV-vis spectroscopy as well as MS. The photophysical properties of these complexes were studied; high molar absorptivity values, modest quantum yields and luminescence lifetimes on the ms timescale were obtained. Anion binding results in a change in the photophysical properties of the complexes. The anion sensing ability of the Tb(III) complex was evaluated via visual detection, UV-vis and fluorescence studies. The sensor was found to be responsive towards a variety of anions, and large binding constants were obtained for the coordination of anions to the sensor.     

Complexation of Calix[4]arene With Alkali Metal Cations: Conformational Binding Selectivity and Cation-π Driven Inclusion

Hartree-Fock, second order Møller-Plesset perturbation theory, and density functional theory calculations were carried out to analyse the complexation of calix[4]arene with cationic species including H + and the alkali metal cations (Li + , Na + , K + , Rb + , and Cs + ). Special emphasis has been placed on conformational binding selectivity, and on the structural characterization of the complexes. Li + and Na + cations are located in the calix[4]arene lower rim. The larger cations (K + , Rb + , and Cs + ) complex preferentially with the calix[4]arene cone conformer, and their endo (inclusive) complexation is driven by cation- ~ interactions, leading in the case of K + to a structure that reflects a preferential interaction with two phenol rings. The endo complexation of Cs + with calix[4]arene is in agreement with X-ray diffraction data.     

Synthesis of calix[4]arene alkylamine derivatives as new phase-transfer catalysts for esterification reaction

This study reports the synthesis of calix[4]arene-based phase-transfer catalysts derived from the reaction of 5,17-di-tert-butyl-25,27,26,28-tetrahydroxycalix[4]arene with N-ethylpiperazine, diallylamine or 4-benzylpiperidine. The catalytic efficiency of the calix[4]arenes alkylamine derivatives was evaluated by carrying out the ester-forming reaction of alkali metal carboxylates (sodium butyrate or sodium caprylate) with p-nitrobenzyl bromide. It has been observed that the ester-forming reaction of alkali metal carboxylates with p-nitrobenzyl bromide, using the N-ethylpiperazine amine derivative of calix[4]arene as a phase-transfer catalyst in dichloromethane at 25 °C, provided the best yields.     

Potassium Sensing Calix[4]arene Crown Ethers

1,3-Alternate calix[4]arene crown-5 (1) and corresponding biscrown-5 (2) were synthesized and the complexation behavior with alkali metal ions examined. For both 1 and 2, potassium ion was selectively extracted from aqueous phase into organic phase over other alkali metal ions based on two phase extraction experiment. The complexation ratio between calix[4]arene biscrown-5 (2), in which two crown cavities connect to the calix[4]arene framework by 1,3-alternate fashion and potassium metal ion is found to 1:1 by proton NMR spectroscopy and extraction equilibria. Association constants (logK_a) for 1 and 2 were determined to give 2.51 and 3.49, respectively.     

Synthesis and Metal Ion Recognition Properties of a Novel Chiral Calix[4](azoxa)crown-7

A novel chiral calix[4](azoxa)crown-7 (9) has been synthesized and its metal ion recognition properties investigated. The starting reagents, chiral diamine 5 and calix[4]arene diacid chloride derivative 8, were prepared according to literature methods. ¹H and ¹³C NMR data show that 9 exists in a cone conformation. In liquid–liquid extraction experiments, 9 exhibits selectivity for Li⁺ among the other alkali metals and a good extraction ability for transition metal cations, suggesting its potential use in different fields, such as a sensor for ions as well as for chiral molecules.     

Polymer Supported Calix[4]arene Schiff Bases: A Novel Chelating Resin for Hg2+ and Dichromate Anions

This article describes the synthesis and characterization of two new calix[4]arene Schiff bases and their polymeric resins. The extraction properties of these “proton switchable extractants” with alkali, transition, post transition metal cations and for dichromate anions are reported. The two new calix[4]arene based Schiff bases (5 and 6) have been synthesized from 5,17‐diformyl‐25,27‐dipropoxy‐26,28‐dihydroxycalix[4]arene (4) by treatment with 3‐amino‐methylpyridine and 1,8‐diaminooctane in two separate reaction flasks following the same procedure. Compounds 5 and 6 have been appended to a polymeric resin by treatment with Merrifield resin through a nucleophilic substitution reaction. The receptor compounds (3 and 5–8) do not extract alkali metal cations, but show some selectivity toward transition metal cations, and a particularly high selectivity to Hg²⁺ and Pb²⁺. The protonated forms of all of the calixarene‐based receptors are good extractants for transferring Cr₂O₇ ^2?/HCr₂O₇ ^? anions from an aqueous into a dichloromethane layer.     

Synthesis,structures, and conformational characteristics of calixarene monoanions and dianions

The synthesis, complete characterization, and solid state structural and solution conformation determination of calix[n]arenes (n = 4, 6, 8) is reported. A complete series of X-ray structures of the alkali metal salts of calix[4]arene (HC4) illustrate the great influence of the alkali metal ion on the solid state structure of calixanions (e.g., the Li salt of monoanionic HC4 is a monomer; the Na salt of monoanionic HC4 forms a dimer; and the K, Rb, and Cs salts exist in polymeric forms). Solution NMR spectra of alkali metal salts of monoanionic calix[4]arenes indicate that they have the cone conformation in solution. Variable-temperature NMR spectra of salts HC4.M (M = Li, Na, K, Rb, Cs) show that they possess similar coalescence temperatures, all higher than that of HC4. Due to steric hindrance from tert-butyl groups in the para position of p-tert-butylcalix[4]arene (Bu(t)C4), the alkali metal salts of monoanionic Bu(t)C4 exist in monomeric or dimeric form in the solid state. Calix[6]arene (HC6) and p-tert-butylcalix[6]arene (Bu(t)C6) were treated with a 2:1 molar ratio of M(2)CO(3) (M = K, Rb, Cs) or a 1:1 molar ratio of MOC(CH(3))(3) (M = Li, Na) to give calix[6]arene monoanions, but calix[6]arenes react in a 1:1 molar ratio with M(2)CO(3) (M = K, Rb, Cs) to afford calix[6]arene dianions. Calix[8]arene (HC8) and p-tert-butylcalix[8]arene (Bu(t)()C8) have similar reactivity. The alkali metal salts of monoanionic calix[6]arenes are more conformationally flexible than the alkali metal salts of dianionic calix[6]arenes, which has been shown by their solution NMR spectra. X-ray crystal structures of HC6.Li and HC6.Cs indicate that the size of the alkali metal has some influence on the conformation of calixanions; for example, HC6.Li has a cone-like conformation, and HC6.Cs has a 1,2,3-alternate conformation. The calix[6]arene dianions show roughly the same structural architecture, and the salts tend to form polymeric chains. For most calixarene salts cation-pi arene interactions were observed.     

Synthesis and complexation study of calix[4]arene diamine derivative incorporated in a polymeric backbone with chiral monomers

The novel chiral polymeric compounds containing more than one calix[4]arene have been synthesized by reacting a new calix[4]arene diamine derivative with two chiral monomers. These newly prepared compounds were studied by extraction of toxic heavy metal (Cu²⁺, Co²⁺, Cd²⁺, Hg²⁺), silver and alkali metal (Na⁺, K⁺) cations from aqueous phase. It was observed that the resulting calixarene-based polymers have a good complexing ability towards silver, alkali metal and toxic heavy metal cations.     

Synthesis and Properties of a Series of Novel Calix[6]arene Diazo Derivatives

In this study, seven new compounds p-(4-butyl-phenylazo)calix[6]arene(1), p-(4-(phenylazo)phenylazo)calix[6]arene (2),p-(4-hydroxyphenylazo)calix[6]arene (3),p-{4-[N-(thiazol-2-yl)sulfamoyl]phenylazo\}calix[6]arene(4), p-(4-acetamidophenylazo)calix[6]arene (5),p-(thiazol-2-ylazo)calix[6]arene (6) andp-(2-sulfanylphenylazo)calix[6]arene (7) have been synthesizedfrom calix[6]arene by diazo coupling with the corresponding aromaticamines. UV-Vis, IR, ¹H and ¹³C NMR spectral data have been used to elucidate the structures of the compounds elemental analyses     

Solid State Confinement of Ferrocene by Calixarenes

Combinations of ferrocene with unsubstituted calix [n]arenes, n =4 and 5, in toluene afford crystalline inclusion complexes (calix[4]arene) ₃ (ferrocene) [hexagonal, a =14.7797(4), c =18.4400(4) Å, P6M₃/m , ρ = 1.389 g.cm ^?1 , Z =2, R ₁ =0.0963 (on 1401 observed data [ I >2 σ ( I )])] as a lattice-type inclusion complex, and (calix[5]arene)(toluene) _0.55 (ferrocene) _0.45 [monoclinic, a =9.6908(8), b =15.069(1), c =22.957(1) Å, β = 90.155(5)°, P2₁/m , ρ =1.318 g.cm ^?1 , Z =4, R ₁ =0.1005 (on 3130 observed data [ I >2 σ ( I )])], that shows endo -cavity complexation of ferrocene by the calixarene.     

Allosteric coextraction of sodium and metal ions with calix[4]arene derivatives 1

Solvent extraction of three alkali metal ions with p-t-octylcalix[6]arene hexacarboxylic acid, p-t-octylcalix[4]arene tetracarboxylic acid, corresponding linear trimeric and monomeric analogs was investigated. Cyclic tetramer selectively extracts sodium ion among alkali ions at extremely low pH, while the corresponding cyclic hexamer, the trimer, and the monomer exhibited only poor extraction ability for all alkali metals examined. The detailed extractive investigation of sodium ions with the cyclic tetramer was carried out. It was found that two sodium ions are simultaneously extracted by a single molecule of calix[4]arene derivative and that the second sodium extraction is facilitated by the uptake of the first sodium. The self-coextraction mechanism of sodium ions proposed in the present paper also strongly supports allosteric coextraction of sodium and other metal ions. In the competitive extraction of four alkali metal ions, potassium ion was slightly extracted as the second ion at low pH region, whereas it was hardly extracted in the individual extraction system. The result also supports the coextraction mechanism and role of the first-extracted sodium ion as an allosteric trigger. The extraction equilibrium constants of the cyclic tetramer and two sodium ions, K _ex1 and K _ex2, were estimated.     

Selective Transport of Cesium and Strontium Ions Through Polymer Inclusion Membranes Containing Calixarenes as Carriers

Abstract

Cs⁺ and Sr²⁺ are selectively removed over Na⁺ from acidic aqueous solutions with high Na⁺ concentrations by using membranes designed to selectively transport one of the two cations. To this end, calix[4]arene derivatives were used as carriers in polymer inclusion membranes (PIMs). The synthesis and characterization of new calix[4]arene derivatives (a bisamide (2) and three bisesters (3, 5 and 6)) used for the separation of Sr²⁺ are described. Another bisester (4) was employed for the same separation. In addition, a calix[4]arene-crown-6 (7) was incorporated into the membrane for Cs⁺ extraction. The concentration of each membrane component (polymer, carrier and counter-ion) was optimized and the permeability coefficients (P, m sec^?1) of Cs⁺, Sr²⁺ and Na⁺ were determined. A synergistic effect between the calixarenes and dinonylnaphtalenesulfonic acid, used as counterion, (DNNS, 8) was observed. High selectivity of Cs⁺ over Na⁺ and of Sr²⁺ over Na⁺ were obtained with compounds 7 and 3, respectively. The best P for Sr²⁺ was obtained with compound 4. A long-term experiment was carried out to demonstrate the durability of PIMs. PIMs are compared to classical supported liquid membranes.     

Synthesis and Structure of Novel Double Flexible Spacer Bridged Biscalix[4]arenes

25, 25′, 27, 27′‐Bis(1,3‐dioxypropane)‐bis(5, 11, 17, 23‐tetra‐tert‐butylcalix[4]arene‐26,28‐diol) (4) and 25, 25′, 27, 27′‐bis(1, 4‐dioxybutane)‐bis (5, 11, 17, 23‐tetra‐tert‐butylcalix‐[4]arene‐26, 28‐diol) (5) were synthesized by the reaction of p‐tert‐butylcalix[4]arene (1) with preorganized 25, 27‐bis(3‐bromoproxyl)calix[4]arene‐26, 27‐diol (2) and 25, 27‐bis(3‐bromobutoxyl)calix[4]arene‐26, 27‐diol (3) in the presence of K₂CO₃ and KI. Compounds 4 and 5 were characterized with X‐ray analysis and the selectivity of 4 and 5 toward K⁺ over other alkali metal ions, alkaline metal ions as well as NH₄⁺ were investigated with an ion‐selective electrode.