Can alkane isomers be separated? Adsorption equilibrium and kinetic data for hexane isomers and their binary mixtures on MFI

In this study we present a global overview of the adsorption behavior of hexane isomers on MFI. With an experimental approach that couples a manometric technique with Near Infrared (NIR) spectroscopy, which has been recently developed, we did address adsorption kinetic properties of n-hexane, 2-methylpentane, 2,2-dimethylbutane and 2,3-dimethylbutane, and their binary mixtures. The adsorption equilibrium properties of the binary mixtures were also assessed using the same technique. Whereas the adsorption isotherms and heats of adsorption for single components have been studied by a manometric technique coupled with a micro calorimeter. The differential heats of adsorption of n-hexane increase slightly with loading, on the other hand the heat of adsorption of branched hexanes exhibits a decrease with loading. The diffusion rates on MFI of n-hexane, 2-methylpentane and 2,3-dimethylbutane are in the same order of magnitude. However, the diffusion rate of 2,2-dimethylbutane is two orders of magnitude lower than rates of the other isomers. In the binary mixtures the components interact and the difference between the diffusion rates of the components decreases. The MFI zeolite presents equilibrium selectivity towards the less branched isomers. In conclusion, a separation process for linear/mono-branched alkanes + double-branched alkanes, has to be based on its equilibrium properties and not based on adsorption kinetics.     

Syntheses of diethyleneoxy bridged cryptophanes and their complexing abilities with alkali metal and alkylammonium cations

Abstract

The anti- and syn-diethyleneoxy bridged cryptophanes (3a and 3b) were prepared by the direct trimerization of 1,5-bis[(4-hydroxymethyl)-2-methoxyphenoxy]-3-oxapentane, which was obtained by the reaction of diethyleneglycol ditosylate with vanillyl alcohol and/or by stepwise methods from vanillyl alcohol. The syn isomer (3b) showed highly selective complexing abilities for cesium, and the tetraethylammonium and triethylmethylammonium cations as compared with those of the anti isomer (3a).     

Relative rate measurements of some reactions of hydroxyl radicals with alkanes studied under atmospheric conditions

A flow system has been developed to study relative rate coefficients of hydroxyl radicals reacting with alkanes under conditions relating to tropospheric chemistry. Relative Arrhenius parameters have been measured over the temperature range 243–328 K for pairs of alkanes from a list consisting of n-butane, 2-methylpropane, n-pentane, n-hexane, 2,2- and 2,3-dimethylbutane, 2,3,3-trimethylbutane, and 2,3,4-trimethylpentane. The results have been incorporated into a Structure-Activity Relation for hydroxylalkane reactions which leads to the following group rate coefficients for a temperature range of 240–500 K.      

Kinetics of the reaction of oh radicals with a series of branched alkanes at 297 ± 2 K

Relative rate constants for the reaction of OH radicals with a series of branched alkanes have been determined at 297 ± 2 K, using methyl nitrite photolysis in air as a source of OH radicals. Using a rate constant for the reaction of OH radicals with n-butane of 2.58 × 10^?12 cm³/molecule · s, the rate constants obtained are (× 10¹² cm³/molecule · s): isobutane, 2.29 ± 0.06; 2-methylbutane, 3.97 ± 0.11; 2,2-dimethylbutane, 2.66 ± 0.08; 2-methylpentane, 5.68 ± 0.24; 3-methylpentane, 5.78 ± 0.11; 2,2,3-trimethylbutane, 4.21 ± 0.08; 2,4-dimethylpentane, 5.26 ± 0.11; methylcyclohexane, 10.6 ± 0.3; 2,2,3,3-tetramethylbutane, 1.06 ± 0.08; and 2,2,4-trimethylpentane, 3.66 ± 0.16. Rate constants for 2,2-dimethylbutane, 2,4-dimethylpentane, and methylclohexane have been determined for the first time, while those for the other branched alkanes are in generally good agreement with the literature data. Primary, secondary, and tertiary group rate constants at room temperature have been derived from these and previous data for alkanes and unstrained cycloalkanes, with the secondary and tertiary group rate constants depending in a systematic manner on the identity of the neighboring groups. The use of these group rate constants, together with a previous determination of the effect of ring strain energy on the OH radical rate constants for a series of cycloalkanes, allows the a priori estimation of OH radical rate constants for alkanes and cycloalkanes at room temperature.     

Synthesis and properties of ruthenium(II) complexes of 3,3′-polymethylene-2-(pyrid-2′-yl)benzo[b]-1,10-phenanthrolines

Coordination abilities of unsymmetrical tridentate ligands, 3,3′-polymethylene-2-(pyrid-2′-yl)-benzo[b]-1,10-phenanthrolines (4) were studied. Reactions of the 3,3′-di- and 3,3′-trimethylene-2-(pyrid-2′-yl)benzo[b]-1,10-phenanthrolines (4b and 4c) with RuCl₃ ? 3H₂O afforded [Ru(4b)₂]²⁺ and [Ru(4c)₂]²⁺ in 57% and 78% yield, respectively, while reactions of the parent non-bridged ligand (4a), tetramethylene-bridged ligand (4d), and fully aromatized ligand (4e) afforded a messy mixture. Reactions of 4 with Ru(tpy)Cl₃ (tpy = 2,2′;6′,2″-terpyridine) afforded [Ru(tpy)(4)]²⁺ in 61–72% yields. UV absorption spectra of the ligands showed four ligand-centered (LC) π–π* transitions and their Ru complexes showed four LC π–π* transitions and one Ru(d_π) → ligand(π*) MLCT. The ligands showed three major emission maxima (λ _emission) in the region of 393–418, 416–445, and 437–471 nm in which λ _emission is highly dependent on the length of the methylene bridge connecting C3 of benzo[b]-1,10-phenanthroline and C3 of pyridine. Ru complexes with fully aromatic ligand, [Ru(tpy)(4e)]²⁺, and the most distorted ligand, [Ru(tpy)(4d)]²⁺, showed two emission maxima at 410 and 444–446 nm, while the others showed one emission at 410 nm. Each of the emission maxima is bathochromatically shifted from the complex with the most distorted ligand (4d) to the complex with fully aromatized planar ligand (4e) indicating lower energy emission.     

Ancillary ligand-controlled assembly of three coordination polymers: synthesis,characterization, luminescent,and catalytic properties

Abstract

By changing the ancillary ligands, three new zinc-based coordination polymers (CPs), {[Zn(4,4′-bpy)(H₂O)₄]·(TDC)·(H₂O)}_n (1), [Zn(2,2′-dmbpy)(TDC)]_n (2), and [Zn₂(3,3′-dmbpy)(TDC)₂]_n (3) (H₂TDC =2,5-thiophenedicarboxylic acid, 4,4′-bpy =4,4′-bipyridine, 2,2′-dmbpy =2,2′-dimethyl-4,4′-bipyridine, 3,3′-dmbpy =3,3′-dimethyl-4,4′-bipyridine) have been synthesized under the same reaction conditions (H₂O, pH =7–8, and 140°C) and were structurally characterized. 1 is a linear chain structure and further connected into a 3-D structure through hydrogen bonds. 2 shows a 2-D (4,4) network when the dinuclear [Zn₂(COO)₄N₂] building unit is regarded as a six-connected node. 3 has a twofold-interpenetrating 3-D zinc-organic framework pcu topology. Furthermore, 1–3 show strong photoluminescence at room temperature in the solid state, and the catalytic activities of 1–3 for degradation of methyl orange in a Fenton-like process have been investigated. The results suggest that the ancillary ligands influence the final resulting CPs.     

(Perhalogenmethylthio)heterocyclen. XXI. Reaktionen halogenierter perhalogenmethylthiopyrrole: Salz- und radikalbildung,dimerisierung

2-Chloro-3,4,5-tris(trifluoromethylthio)pyrrole ( 2a ), 3-Chloro-2,4,5-tris(trifluoromethylthio)pyarrole ( 2b ) and 3,4-dichloro-2,5-bis(trifluromoethylthio)pyrrole ( 2c ) react with silver nitrate/silver acetate in good yield to give the corresponding N-silver salts 3a-c . Compound 2b forms with an aqueous potassium hydroxide solution the N-potassium salt 4 . Compounds 3a and 3b react with iodine to give the dimeers 2,2′-dichloro-3,3,′ 4,4′5,5′-hexakis(trifluoromethylthio)-2,2′-bi-2H-pyrrolyl ( 5a ) and 3,3′-dichloro-2,2′,4,4′,5,5′-hexakis(trifluoromethylthio)-2,2′-bi-2H-pyrrolyl ( 5b ). The dimers dissociate in solution to the corresponding pyrrolayl radicals. The esr and endor spectra of 3-chloro-2,4,5-tris(trifluoromethylthio)pyrrolyl were measured; coupling constants are given. For the newly prepared substances melting-points, ¹⁹F-nmr and ir spectroscopical data are provided.     

一种新型的光调控磁分子体系的合成与性能研究

将稳定的四甲基咪唑啉氮氧自由基嫁接到新型的光致变色化合物双(6-甲基-3-乙基-3-羟基-1-氧代-2-亚茚满基) (1)的分子母体中, 成功合成了新型多功能化合物1-((6'-甲基-3,3'-二乙基-3,3'-二羟基-1,1'-二氧代-[2,2']-联亚茚满基)-6-基甲基)-4-(4",4",5",5"-四甲基咪唑啉-2"-基)吡啶溴化物 3"-氧化物 1"-氧基(3). 对化合物3的光致变色性质, ESR波谱以及磁性质进行了研究. 化合物3光照后颜色发生变化, ESR信号表现出久期增宽. 变温磁化率的测试结果显示, 化合物3光照后反铁磁相互作用进一步增强. 研究结果表明化合物3的颜色和磁性的变化均可用光照进行调控.     

The Crystal Structure of Biphenyltetracarboxylic Dianhydride Isomers

１　ＩＮＴＲＯＤＵＣＴＩＯＮＡｒｏｍａｔｉｃｐｏｌｙｉｍｉｄｅｓａｒｅａｃｌａｓｓｏｆｐｏｌｙｍｅｒｓｋｎｏｗｎｆｏｒｔｈｅｉｒｈｉｇｈｔｅｍｐｅｒａｔｕｒｅｓｔａｂｉｌｉｔｙ,ｅｘｃｅｌｌｅｎｔｅｌｅｃｔｒｉｃａｌａｎｄｍｅｃｈａｎｉｃａｌｐｒｏｐｅｒｔｉｅｓ．Ｔｈｅｓｅｐｒｏｐｅｒｔｉｅｓｍａｋｅｔｈｅｍｈｉｇｈｌｙｄｅｓｉｒａｂｌｅｆｏｒｈｉｇｈｐｅｒｆｏｒｍａｎｃｅａｐｐｌｉｃａｔｉｏｎｓ〔１〕．Ｈｏｗｅｖｅｒ,ｔｒａｄｉｔｉｏｎａｌｐｏｌｙｉｍｉｄｅｓｓｕｃｈａｓＵＰＩＬＥＸＲａｎｄ…     

Selective Endo and Exo Binding of Mono‐ and Ditopic Ligands to a Rhomboidal Diporphyrin Prism

Copper(I) can preferentially form heteroleptic complexes containing two phosphine and two nitrogen donors due to steric factors. This preference was employed to direct the self‐assembly of a porphyrin‐faced rhomboidal prism having two parallel tetrakis(4‐iminopyridyl)porphyrinatozinc(II) faces linked by eight 1,4‐bis(diphenylphosphino)benzene pillars. The coordination preferences of the Cu^I ions and geometries of the ligands come together to generate a slipped‐cofacial orientation of the porphyrinatozinc(II) faces. This orientation enables selective encapsulation of 3,3′‐bipyridine (bipy), which bridges the Zn^II ions of the parallel porphyrins, whereas 4,4′‐bipy exhibits weaker external coordination to the porphyrin faces. Reaction with 2,2′‐bipy, by contrast, results in the displacement of the tetratopic porphyrin ligand and formation of [{(2,2′‐bipy)Cu^I}₂(diphosphine)₂]. The differing strengths of interactions of bipyridine isomers with the system allows for a hierarchy to be deciphered, whereby 4,4′‐bipy may be displaced by 3,3′‐bipy, which in turn is displaced by 2,2′‐bipy.     

Excess enthalpies of binary mixtures of 1-hexene with some branched alkanes at the temperature 298.15 K

Measurements of excess molar enthalpies at the temperature 298.15 K in a flow microcalorimeter are reported for the five binary mixtures formed by mixing 1-hexene with the branched alkanes: 2-methylpentane, 3-methylpentane, 2,2-dimethylbutane, 2,3-dimethylbutane, and 2,2,4-trimethylpentane. Smooth Redlich–Kister representations of the results are described. It was found that the Liebermann–Fried model also provided good representations of the results.     

Reaction of Zinc Enolates of Alkyl Esters of Substituted 4-Bromo-3-Oxoalkanoic Acids with Aldehydes

Zinc enolates formed from ethyl 4-bromo-2,2,4-trimethyl-3-oxopentanoate react under the conditions of one- of two-stage synthesis with aliphatic, unsaturated, or aromatic aldehydes to form 6-R-2,2,4,4-tetramethyl-2,3,5,6-tetrahydropyran-2,4-diones. Zinc enolates obtained from ethyl 4-bromo-2,2-dimethyl-3-oxopentanoate, -hexanoate, and -2,2,5-trimethyl-3-oxohexanoate under the similar conditions react with aliphatic or aromatic aldehydes to give mainly 5-R¹-6-R²-3,3-dimethyl-2,3,5,6-tetrahydropyran-2,4-diones as E or Z isomers or their mixtures. Zinc enolates generated from the ethyl 4-bromo-2,2-diethyl- or 2-benzyl-2-ethyl-3-oxobutanoates react with aromatic aldehydes to give ethyl 5-R-2-R-2-ethyl-3-oxo-4-pentenoates as E isomers.     

Synthesis and Properties of Brominated 6,6'-Dimethyl-[2,2'-bi-1H-indene]-3,3'-diethyl-3,3'-dihydroxy-1,1 '-diones

Photochromic 6‐bromomethyl‐6′‐methyl‐[2,2′‐bi‐1H‐indene]‐3,3′‐diethyl‐3,3′‐dihydroxy‐1,1′‐dione ( 2 ), 6,6′‐ bis(bromomethyl)‐[2,2′‐bi‐1H‐indene]‐3,3′‐diethyl‐3,3′‐dihydroxy‐1,1′‐dione ( 3 ) and 6,6′‐bis(dibromomethyl)‐[2,2′‐ bi‐1H‐indene]‐3,3′‐diethyl‐3,3′‐dihydroxy‐1,1′‐dione ( 4 ) have been synthesized from 6,6′‐dimethyl‐[2,2′‐bi‐1H‐ indene]‐3,3′‐diethyl‐3,3′‐dihydroxy‐1,1′‐dione ( 1 ). The single crystal of 4 was obtained and its crystal structure was analyzed. The results indicate that in crystal 4 , molecular arrangement is defective tightness compared with its precursor 1 . Besides, UV‐Vis absorption spectra in CH₂Cl₂ solution, photochromic and photomagnetic properties in solid state of 2 , 3 and 4 were also investigated. The results demonstrate that when the hydrogen atoms in the methyl group on the benzene rings of biindenylidenedione were substituted by bromines, its properties could be affected considerably.     

Polyimides from isomeric oxydiphthalic anhydrides

2,2′,3,3′‐Oxydiphthalic dianhydride (2,2′,3,3′‐ODPA) and 2,3,3′,4′‐ODPA were synthesized from 3‐chlorophthalic anhydride with 2,3‐xylenol and 3,4‐xylenol, respectively. Their structures were determined via single‐crystal X‐ray diffraction. A series of polyimides derived from isomeric ODPAs with several diamines were prepared in dimethylacetamide (DMAc) with the conventional two‐step method. Matrix‐assisted laser desorption/ionization time‐of‐flight spectra showed that the polymerization of 2,2′,3,3′‐ODPA with 4,4′‐oxydianiline (ODA) has a greater trend to form cyclic oligomers than that of 2,3,3′,4′‐ODPA. Both 2,2′,3,3′‐ODPA and 2,3,3′,4′‐ODPA based polyimides have good solubility in polar aprotic solvents such as DMAc, dimethylformamide, and N‐methylpyrrolidone. The 5% weight‐loss temperatures of all polyimides were obtained near 500 °C in air. Their glass‐transition temperatures measured by dynamic mechanical thermal analysis or differential scanning calorimetry decreased according to the order of polyimides on the basis of 2,2′,3,3′‐ODPA, 2,3,3′,4′‐ODPA, and 3,3′,4,4′‐ODPA. The wide‐angle X‐ray diffraction of all polyimide films from isomeric ODPAs and ODA showed some certain extent of crystallization after stretching. Rheological properties revealed that polyimide (2,3,3′,4′‐ODPA/ODA) has a comparatively lower melt viscosity than its isomers, which indicated its better melt processability. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3249–3260, 2003     

Transport properties of alkanes through ceramic thin zeolite MFI membranes

Polycrystalline randomly oriented defect free zeolite layers on porous α-Al₂O₃ supports are prepared with a thickness of less than 5 μm by in situ crystallisation of silicalite-1. The flux of alkanes is a function of the sorption and intracrystalline diffusion. In mixtures of strongly and weakly adsorbing gases and a high loadings of the strongly adsorbing molecule in the zeolite poze, the flux of the weakly adsorbing molecule is suppressed by the sorption and the mobility of the strongly adsorbing molecule resulting in pore-blocking effects. The separation of these mixtures is mainly based on the sorption and completely different from the permselectivity. At low loadings of the strongly adsorbing molecules the separation is based on the sorption and the diffusion and is the same as the permselectivity. Separation factors for the isomers of butane (n-butane/isobutane) and hexane (hexane/2,2-dimethylbutane) are respectively high (10) and very high (> 2000) at 200°C. These high separation factors are a strong evidence that the membrane shows selectivity by size-exclusion and that transport in pores larger than the zeolite MFI pores (possible defects, etc) can be neglected.     

Synthesis of (pyridinyl)-1,2,4-triazolo[4,3-a]pyridines

Methods for the synthesis of (pyridinyl)-1,2,4-triazolo[4,3-a]pyridines were developed. The principal route to the required intermediate 2-chloropyridines was based on rearrangements of mono N-oxides of 2,2′-bipyridine, 2,3′-bipyridine, 3,3′-bipyridine, 2,4′-bipyridine and 4,4′-bipyridine with phosphorus oxychloride. Reaction of 3,3′-bipyridine 1-oxide or 2,2′-bipyridine 1-oxide with phosphorus oxychloride gave mixtures of chloro isomers. Reaction with acetic anhydride, 3,3′-bipyridine 1-oxide and 2,2′-bipyridine 1-oxide gave exclusively [3,3′-bipyridine]-2(1H)-one and [2,2′-bipyridine]-6(1H)-one, respectively. 1,2,4-Triazolo[4,3-a]pyridines with pyridinyl groups at the 5,6,7 and 8 positions were synthesized.     

Cyclopropanation of N-Substituted 2-Oxochromene-3-carboxamides and 3-Oxobenzo[<Emphasis Type="Italic">f</Emphasis>]chromene-2-carboxamides with Bromine-containing Zinc Enolate Prepared from α,α -Dibromopinacolin and Zinc

Zinc enolate obtained from 1,1-dibromo-3,3-dimethylbutan-2-one reacted with N-substituted 2-oxochromene-3-carboxamides and 3-oxobenzo[f]chromene-2-carboxamides affording 1-(2,2-dimethyl-propanoyl)-2-oxo-1a, 7b-dihydrocyclopropa[c]chromene-1a-carboxamides and 1-(2,2-dimethylpropanoyl)-2-oxo-1a, 9C-dihydrobenzo[f]cyclopropa[c]chromene-1a-carboxamide as single isomers.     

Radiation-induced synthesis of branched liquid alkanes

The irradiation of gaseous alkane mixtures under circulation conditions was used for the synthesis of liquid branched hydrocarbons. It was found that the synthesized liquid product was a mixture of alkanes with the average molecular weight higher than the molecular weight of the parent gas by a factor of 3–4. The resulting liquids were characterized by boiling range from 35 to 200°C in atmospheric distillation. The average degree of molecular branching in the synthesized liquids was evaluated on the basis of their knock resistance. The octane ratings of liquid mixtures were above 95 (motor octane number) or 103 (research octane number). The fractional composition and detonation properties of the synthesized liquids suggested the prevalence of C₅–C₁₁ isomers with highly branched structures in these liquids. Depending on irradiation conditions, 2,3-dimethylbutane, 2-methylpentane, or 3-methylpentane was predominant among hexanes. As a rule, 2,2,3-trimethylbutane and 2,3-dimethylpentane prevailed among heptanes.     

Synthesis of 1.6-diazabiphenylene by flash vacuum pyrolysis of 2,5,9,10-tetra-azaphenanthrene; NMR evidence for rehybridisation in biphenylenes

A mixed Ullmann reaction between 2- and 4-chloro-3-nitropyridines furnished 3,3′-dinitro-2,4′-bipyridyl and reduction to 2,5,9,10-tetra-azaphenanthrene followed by thermal extrusion of nitrogen gave 1,6-diazabiphenylene; different complexing abilities of the two nitrogen atoms of this compound were revealed by ¹H nmr using Eu(fod)₃ which are consistent with previous work on the rehybridisation in strained ring systems and the value of ¹J_CH in biphenylene.     

Synthesis and comparative study on polyetherimides from isomeric 4,4′-isopropylidenediphenoxy bis(phthalic anhydride)s

Two isomers of commercial 4,4′-(4,4′-isopropylidenediphenoxy) bis(phthalic anhydride) (4,4′-BPADA), that is, 3,4′-(4,4′-isopropylidenediphenoxy) bis(phthalic anhydride) (3,4′-BPADA) and 3,3′-(4,4′-isopropylidenediphenoxy) bis(phthalic anhydride) (3,3′-BPADA), were synthesized through aromatic nucleophilic substitution from nitrophthalonitrile and bisphenol A. 3,4′-BPADA was first synthesized from two intermediates, that is, 3-(4-[4-hydroxyphenylisopropylidene] phenoxy) phthalonitrile (3-BPADN) and 3,4′-(4,4′-isopropylidenediphenoxy) bis(phthalonitrile) (3,4′-BPATN). The corresponding three series of polyetherimides (PEIs) were prepared with two representative aromatic diamines (4,4′-oxydianiline and m-phenylenediamine (m-PDA)) via two-step procedure and chemical imidization. Isomeric polyimides showed T_gs from 206 to 256°C in nitrogen and T_d5%s from 488 to 511°C in argon, good mechanical properties (tensile moduli of 2.3–3.3 GPa, tensile strengths of 70–96 MPa, and elongations at break of 3.2%–5.1%), and good solubility. With the introduction of 3-substituted phthalimide unit, PEIs displayed higher T_g values, lower strengths and elongations, better solubility and larger d-spacings. The rheological properties of thermoplastic polyimide resins based on the BPADA isomers were investigated, which showed that polyetherimide PEI-3b derived from 3,3′-BPADA and m-PDA had the lowest melt viscosity among the isomers, indicating that the melt processibility had been greatly improved.