Designing Efficient and Ultralong Pure Organic Room‐Temperature Phosphorescent Materials by Structural Isomerism

Pure organic materials with ultralong room‐temperature phosphorescence (RTP) are attractive alternatives to inorganic phosphors. However, they generally show inefficient intersystem crossing (ISC) owing to weak spin–orbit coupling (SOC). A design principle based on the realization of small energy gap between the lowest singlet and triplet states (ΔE_ST) and pure ππ* configuration of the lowest triplet state (T₁) via structural isomerism was used to obtain efficient and ultralong RTP materials. The meta isomer of carbazole‐substituted methyl benzoate exhibits an ultralong lifetime of 795.0 ms with a quantum yield of 2.1 %. Study of the structure–property relationship shows that the varied steric and conjugation effects imposed by ester substituent at different positions are responsible for the small ΔE_ST and pure ππ* configuration of T₁.     

Polymerization of Diallyl Alkyl Isocyanurates

Abstract

Polymerizations of several diallyl alkyl isocyanurates were investigated to explore in more detail the steric effect observed in the polymerization of triallyl isocyanurate [3, 5], as compared to its isomer triallyl cyanurate, by changing alkyl groups from methyl, propyl, hexyl, and octyl up to lauryl. The rate of polymerization, the gel point, the cyclization constant, and the primary chain length were evaluated. For example, the primary chain length increased with an increase in the bulkiness of the alkyl group as expected, although in the polymerization of diallyl lauryl isocyanurate it decreased as a reflection of reduced rate of propagation due to the enhanced steric effect arising from a very bulky lauryl group.     

Phase Transitions in Pure and Hybrid Hydrogels: A Fluorescence Study

Summary: Recent observations on phase transitions around the critical point showed that the critical exponents differed drastically from percolation results and classical results for pure hydrogel systems, depending on monomer concentration. In addition to pure hydrogels, the sol-gel phase transition during radical crosslinking copolymerization of acrylamide (AAm) and N-isopropylacrylamide (NIPA) hybrid was studied by using the steady state fluorescence (SSF) technique. N,N′-methylenebis(acrylamide) (BIS) and ammonium persulfate (APS) were used as crosslinker and initiator, respectively. Pyranine (trisodium 8-hydroxypyrene-1,3,6-trisulfonate acid, HPTS) was added as a fluoroprobe for monitoring the polymerization. It was observed that pyranine binds to AAm and NIPA chains on the initiation of the polymerization, thus the fluorescence spectra of the bonded pyranines shift to shorter wavelengths. Fluorescence spectra of the bonded pyranines allowed to monitor the sol-gel phase transition without disturbing the system mechanically and to test the universality of the sol-gel transition as a function of polymer concentration ratios. The observations around the gel point of PAAm-PNIPA hybrid show that the gel fraction exponent β obeyed the percolation result.     

Low-Temperature Polymerization of endo- and exo-2-Methyl-7-oxabicyclo-[2.2.1]-heptane

Abstract

Polymerization of the title compounds in methylene di-chloride with PF, catalyst have shown that the rate of polymer formation drops sharply with temperature and the polymerization ceases entirely around -60 to -70°C. Ex-periments carried out with the exo-2-Me isomer have shown that at -30°C a limiting conversion of approx 40% is attained and simultaneously the molecular weight and the molecular weight distribution level off. At -50°C the same limiting conversion level is reached; however, the molecular weight level is higher and a study of changes in molecular weight distribution with time indicates that at this tempera-ture a greater proportion of chains remain active throughout the polymerization. Even at -30°C, however, experiments with changing conditions, especially the temperature, during the runs have demonstrated that the systems are not “dead” after the limiting conversion has been reached. Polymeriza-tion of the endo-2-Me isomer at -50°C has shown that in the time interval studied the limiting viscosity number increases essentially linearly with time.     

Rates of Sulfonation of Bead Copolymers of Styrene Cross - Linked with Mixtures of m- and p-Divinylbenzene

Abstract

The rate of sulfonation of bead copolymers of styrene cross-linked with 8 mole % divinylbenzene (mixed isomers) is remarkably sensitive to the isomeric (para/meta) composition of the mixture of divinylbenzenes. The rate is enhanced by a factor of 4 for compositions containing 20–40% para isomer.     

Gel Chromatographic Evaluation of the Binding Ability of Linear Phosphate Anions to Magnesium Ions

Abstract

The binding ability of linear phosphate anions of various degrees of polymerization to magnesium ion has been evaluated by a zonal gel chromatographic method at pH 9.8 and 4.2. The average number of bound magnesium per one phosphate unit was determined at free magnesium concentration of 1.00x10^?5 M in 0.1 M tetramethylammonium chloride solution at 25°C. At pH 4.2, the binding ability increased as the degrees of polymerization of the sample phosphate increased, while it decreased at pH 9.8. A gel chromatography-atomic absorption detector system was applied which allowed a rapid and continuous analysis.     

Study of the Isothermal Bulk Polymerization of Methacrylic Acid and Some Methacrylic Acid Esters by Differential Scanning Calorimetry

Abstract

The course of the isothermal bulk polymerization of methacrylic acid and some methacrylic acid esters differing in the length of the ester group was studied by differential scanning calorimetry at different temperatures. The enthalpies of polymerization, the residual monomer content, the overall reaction rate constants, and the overall activation energies were calculated. The molecular weight averages of the synthesized polymers before and after the gel effect were measured by gel permeation chromatography.     

Efficient Approach to Pure Entacapone and Related Compounds

A new and efficient process through a new intermediate, (2E)-2-cyano-3-(3,4-dihydroxy-5-nirtrophenyl)prop-2-enoic acid 15, has been described for preparing substantially pure entacapone 1. This new intermediate 15 was prepared by Knoevenagel condensation of 3,4-dihydroxy-5-nitrobenzaldehyde 2 with 2-cyanoacetic acid 14 and was further condensed with diethylamine to get pure entacapone 1. Some of the important process-related impurities of entacapone (17, 18, 19, and 20) were also prepared easily from this intermediate 15.     

A review of: “The Effects of Hostile Environments on Coattings and Plastics,Acs. D. P. Garner and G. A. Stahl (Editors): Symposium Series 229, American Chemical Society,Washington, D.C., 1983, 339 pp., U.S. and Canada $47.95, export $57.95.”

Rh‐catalyzed polymerization of a new N‐propargylamide monomer having a galactose residue was investigated. The polymerization proceeded in a mixed solvent of THF and water to produce the galactose‐carrying poly(N‐propargylamide) consisting of cis‐isomer. The copolymerization of the monomer with the N‐propargylamide having the alkyl chain was also carried out.     

Benzyl Bromide Functionalized Poly(Phenyleneethynylene)s as Macroinitiators in the Atom Transfer Radical Polymerization of Methyl Methacrylate

Abstract

The behavior of benzyl bromide functionalized poly(phenyleneethynylene)s as macroinitiators in the atom transfer radical polymerization (ATRP) of methyl methacrylate (MMA) was investigated. The ¹H NMR observation of the ATRP using the exclusively para‐linked poly(phenyleneethynylene) macroinitiator PPE1A, and the low molecular weight initiator R‐BzBr, respectively, revealed lower reactivity for the macroinitiator. Comparison of graft copolymers, which were obtained from ATRP of MMA with PPE1A and the partially meta‐linked poly(phenyleneethynylene) PPE1B, showed higher reactivity in the case of PPE1B, expressed by a larger degree of polymerization in the PMMA side chains, as well as higher initiatior efficiency. This might be caused by better solubility of the less symmetric PPE1B. Investigation of the graft copolymers PPE2A and PPE2B was carried out by means of ¹H NMR spectroscopy, gel permeation chromatography (GPC) as well as UV/vis spectroscopy. Impairment of the delocalized π‐electron system of the conjugated polymers during the ATRP was not detectable.     

Redox chemistry of o- and m -hydroxycinnamic acids: A pulse radiolysis study

Radiation chemical reactions of^•OH, O^•−, N₃ ^•and e _aq ^t- witho- and m-hydroxycinnamic acids were studied. The second-orderrateconstantsforthereaction of^•OH with ortho and meta isomers in buffer solution at pH7 are 3.9±0.2 × 10⁹ and 4.4 ± 0.3 × 10⁹ dm³ mol^-1 s^-1 respectively. At pH 3 the rate with the ortho isomer was halved (1.6 ± 0.4 × 10⁹ dm³ mol^-1 s^-1) but it was unaffected in the case of meta isomer (k = 4.2±0.6 × 10⁹dm³mol^-1 s^-1). The rate constant in the reaction of N₃ ^• with the ortho isomer is lower by an order of magnitude (k = 4.9 ± 0.4 × 10⁸ dm³ mol^-1s^-1). The rates of the reaction of e _aq ^t- with ortho and meta isomers were found to be diffusion controlled. The transient absorption spectrum measured in the^•OH witho-hydroxycinnamic acid exhibited an absorption maximum at 360 nm and in meta isomer the spectrum was blue-shifted (330 nm) with a shoulder at 390 nm. A peak at 420 nm was observed in the reaction of O^bb−with theo-isomer whereas the meta isomer has a maximum at 390 and a broad shoulder at 450 nm. In the reaction of the absorption peaks were centred at 370–380 nm in both the isomers. The underlying reaction mechanism is discussed.     

The Synthesis,Characterization, and Photoinitiated Cationic Polymerizaton of Difunctional Oxetanes

Abstract

Seven novel difunctional oxetane monomers have been prepared and characterized using standard spectroscopic techniques. The photoinitiated cationic polymerization of these seven monomers was carried out and their reactivity compared to a typical diepoxide monomer. In these studies the reactivities of the various oxetane monomers were evaluated and compared by three different techniques: gel time measurements, differential scanning photocalorimetry, and real time infrared spectroscopy. It was observed that the difunctional oxetanes are generally more reactive than their structurally similar epoxide counterparts in photoinitiated cationic polymerization.     

Synthesis of the Ziegler Key Intermediate and Related Precursors for the Synthesis of Forskolin and Erigerol in Enantiomerically Pure Form

The Ziegler key intermediate 5, previously used in three total synthesis of forskolin (1), and the intermediate 4, potentially useful for the synthesis of erigerol (2), were obtained in optically pure form by the resolution of the allylic alcohol 7a with R-(-)-O-methylmandelic acid.     

Polymerization of Cyclohexene Oxide By Organoaluminum Compounds

Abstract

The polymerization of cyclohexene oxide (CHO) by various organoaluminum compounds such as R₃Al (R = Me, Et, i-Bu), Et₂AlCl, and EtAlCl₂ is reported. Ethyl-substituted aluminum compounds were found to be very effective for this polymerization. As more chlorine atom is substituted on the aluminum atom, the polymer yield was increased though the molecular weight was decreased. The polymer yields at varying monomer-to-catalyst mole ratios (M/C) were similar (80–93%). The temperature and solvent effect for the present polymerization were also studied. The present poly(CHO) was a less stereoregular (atactic) isomer, regardless of catalysts and polymerization conditions. The resulting poly(CHO) was a white powder ad was soluble in aromatic and halogenated hydrocarbon solvents such as benzene, chlorobenzene, CCl₄, chloroform, etc.     

A pronounced ortho effect in the polymerization of o-substituted β-nitrostyrenes

It was shown in a previous paper that a number of m - and p-substituted β-nitrostyrenes would readily undergo polymerization via anionic initiation with alkoxide ions to yield high polymers, whereas, in all cases, the corresponding o-substituted isomers could not be induced to produce polymers under any conditions tried. This article reports a systematic study of this unexpected “ortho effect” based on the initial postulate that the effect was the result of steric inhibition of the propagation step that would ordinarily lead to polymer. Since the fluorine atom is only slightly larger than the hydrogen atom, the series o-, m-, and p-fluoro-β-nitrostyrenes was synthesized and its alkoxide ion-initiated polymerization studied. Although it was shown in all cases of o-substituted β-nitrostyrenes studied that initiation was rapid, only in the case of o-fluoro-β-nitrostyrene was a substantial amount of polymer obtained. With up to 3 mole % initiator a maximum of 26% polymer was obtained, whereas polymerization was rapid in cases of the meta and para isomers. The values of the propagation rate constants k_p were found to be 1.1 liters/mole-sec for the para isomer as compared with 4.8 × 10^?2 liter/mole-sec for the ortho isomer for a ratio k_p(p)/k_p(o) = 23, the magnitude of this ortho effect for the fluorine atom.     

Stereochemistry in cationic polymerization of alkenyl ethers. III. Effect of the alkoxy group on the steric structure of polymers

Propagation mechanism in the cationic polymerization of alkenyl ethers was investigated through the effect of the bulkiness of alkoxy groups on the steric structure of a polymer. In polymerization with BF₃O(C₂H₅)₂ in toluene at ?78°C, trans-propenyl ethers having less bulky alkoxy groups–methyl, ethyl, and benzyl propenyl ethers–produced a stereoregular polymer having a threo-meso structure, and the cis isomer a nonstereoregular one having threo-meso and racemic structures. On the other hand, in the polymerization of propenyl ethers having bulky alkoxy groups–isopropyl and 1-methylpropyl propenyl ethers–the trans isomer yielded a nonstereoregular polymer with threo-meso and racemic structures, and the cis isomer a stereoregular one with a erythro-meso structure. This result suggests that a bulky alkoxy group plays an important role in determining the steric structure of the polymer by repulsion between the alkoxy groups of a growing chain end and of a monomer. The effect of solvent polarity on the steric structure of a polymer was also studied.     

Solution and Solid‐State Polymerization of 2,3‐Dicyano‐5,7‐dimethyl‐6H‐1,4‐diazepine

Abstract

2,3‐Dicyano‐5,7‐dimethyl‐6H‐1,4‐diazepine (1) is polymerized to a conjugated structure in solution by both alkaline sugar reagents and butoxide in n‐butanol and in the solid state by thermal annealing. From both infrared and nuclear magnetic resonance spectra, all polymers have a similar chain repeat structure involving polymerization at one of the two cyano groups in the molecular structure of 1. Electronic spectra, gel permeation chromatography (GPC), and thermal analysis further characterize the polymers. The methyl protons of 1 are acidic, and solution polymerization is likely initiated by a delocalized anion derived from 1. This delocalized anion also provides a rationalization for polymerization at only one of the cyano groups of 1 instead of cyclopolymerization. The solid state polymerization leads to an amorphous product in a heterogeneous process. The crystal structure of 1 does not allow formation of an infinite chain. A tautomeric form of 1 likely initiates the solid state polymerization. The tautomerization creates a defect site in the crystal of 1, and the initial addition reaction is likely topochemical.     

Synthesis of Poly(IB‐co‐VBDC)‐g‐PMMA via Photo‐initiated Free Radical Graft Polymerization

Abstract

Photoinitiated free radical graft polymerization of methyl methacrylate (MMA) with poly[isobutene‐co‐(4‐vinyl benzyl N,N‐diethyldithiocarbamate)] [poly(IB‐co‐VBDC)] as macromolecular iniferter was investigated. The polymerization proceeds to give a high yield graft copolymer, however it was observed that even in the early stage of the polymerization there formed an insoluble polymer. In the presence of tetraethylthiuram disulfide (TETD) the gel fraction of the yield graft copolymer was drastically reduced and the polymerization was retarded as well. When the [TETD]/[VBDC] increased from 0 to 1.0, the gel fraction of the graft copolymer decreased from 33.2% to 1.6% (wt) while the fraction of the homopolymer of the MMA increased from 4.5% to 10.5% (wt). With the increasing of the UV irradiation time, both the MMA conversion and the molecular weight of the graft copolymer increased readily.     

THE MOLECULAR STRUCTURE OF CIS-2-t-BUTYLAMINO-2-SELENO-4,4,6-TRIMETHYL-1,3,2-DIOXAPHOSPHORINANE C10H22NO2PSe,AN EXAMPLE OF THE TWIST-BOAT CONFORMATION

Abstract

Diastereoisomeric 2-t-butylamino-2-seleno-4,4,6-trimethyl-1,3,2-dioxaphosphorinans have been prepared and separated into pure cis- and trans-isomers. The minor isomer (cis) was investigated by means of x-ray crystallography and its has been demonstrated, that in solid state is possesses twist-boat conformation.     

Radiation-induced polymerization at high pressure of cis- and trans-1,3,3,3-tetrafluoropropene in bulk and with tetrafluoroethylene

The radiation-induced polymerization of cis- and trans-1,3,3,3-tetrafluoropropene in bulk and with tetrafluoroethylene was studied at pressures between 5000 and 15000 atm and temperatures between 21 and 100°C. At 10³ rad/hr the homopolymerization rates range from about 10^?4 to 1%/hr. The activation enthalpy and volume are about 8 kcal/mole (33 kJ/mole) and ?10 cm³/mole, respectively, for both isomers. The cis isomer polymerizes about twice as rapidly as the trans isomer. The latter freezes in the experimental range of temperature and pressure; the polymerization rate is very low in solid phase. Polymer intrinsic viscosities increase with polymerization pressure and decrease with polymerization temperature; the largest value obtained was 0.23 dl/g. In the copolymerizations all reactivity ratios favor incorporation of tetrafluoroethylene by factors of 6–16. The preference is stronger when the trans isomer is used.