Preparation of Sb2S3 nanomaterials with different morphologies via a refluxing approach

Single-crystalline antimony trisulfide (Sb₂S₃) nanomaterials with flower-like and rod-like morphologies were successfully synthesized under refluxing conditions by the reaction of antimony trichloride (SbCl₃) and thiourea with PEG400 and OP-10 as the surfactants. X-ray diffraction (XRD) indicates that the obtained sample is orthorhombic-phase Sb₂S₃ with calculated lattice parameters a=1.124 nm, b=1.134 nm and c=0.382 nm. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) images show that the flower-like Sb₂S₃ is 9–10 μm in size, which is composed of thin leaves with thickness of 0.05–0.2 μm, width of 0.8–2.2 μm and length of 2.5–3 μm, and the rod-like Sb₂S₃ is 45–360 nm in diameter and 0.7–4 μm in length, respectively. UV–Vis analysis indicates that the band gap of Sb₂S₃ nanorods is 1.52 eV, suitable for photovoltaic conversion. A possible mechanism of formation was proposed. The effects of reaction time and surfactants on the growth of nanomaterials with different morphologies were also investigated.     

Hydrothermal synthesis of Bi2Te3 nanowires through the solid-state interdiffusion of Bi and Te atoms on the surface of Te nanowires

Polycrystalline Bi₂Te₃ nanowires were prepared by a hydrothermal method that involved inducing the nucleation of Bi atoms reduced from BiCl₃ on the surface of Te nanowires, which served as sacrificial templates. A Bi–Te alloy is formed by the interdiffusion of Bi and Te atoms at the boundary between the two metals. The Bi₂Te₃ nanowires synthesized in this study had a length of 3–5 μm, which is the same length as that of the Te nanowires, and a diameter of 300–500 nm, which is greater than that of the Te nanowires. The experimental results indicated that volume expansion of the Bi₂Te₃ nanowires was a result of the interdiffusion of Bi and Te atoms when Bi was alloyed on the surface of the Te nanowires. The morphologies of Bi₂Te₃ are strongly dependent on the reaction conditions such as the temperature and the type and concentration of the reducing agent. The morphologies, crystalline structure and physical properties of the product were analyzed by X-ray diffraction (XRD), field-emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), selected area electron diffraction (SAED) and X-ray photoelectron spectroscopy (XPS).     

Structure and growth morphology of Gd2O3-doped CeO2 thin films

Gd₂O₃-doped CeO₂ (Gd_0.1Ce_0.9O_1.95, GDC) thin films were synthesized on (1 0 0) Si single crystal substrates by a reactive radio frequency magnetron sputtering technique. Structures and surface morphologies were characterized by X-ray diffraction (XRD), Atomic Force Microscopy (AFM) and one-dimensional power spectral density (1DPSD) analysis. The XRD patterns indicated that, in the temperature range of 200–700 °C, f.c.c. structured GDC thin films were formed with growth orientations varying with temperature—random growth at 200 °C, (2 2 0) textures at 300–600 °C and (1 1 1) texture at 700 °C. GDC film synthesized at 200 °C had the smoothest surface with roughness of R_rms=0.973 nm. Its 1DPSD plot was characterized with a constant part at the low frequencies and a part at the high frequencies that could be fitted by the f^−2.4 power law decay. Such surface feature and scaling behavior were probably caused by the high deposition rate and random growth in the GDC film at this temperature. At higher temperatures (300–700 °C), however, an intermediate frequency slope (−γ₂≈−2) appeared in the 1DPSD plots between the low frequency constant part and the high frequency part fitted by f⁻⁴ power law decay, which indicated a roughing mechanism dominated by crystallographic orientation growth that caused much rougher surfaces in GDC films (R_rms>4 nm).     

Size-controlled synthesis of LaAlO3 by reverse micelle method: Investigation of the effect of water-to-surfactant ratio on the particle size

Lanthanum monoaluminate (LaAlO₃) nanoparticles have been synthesized using microreactors made of poly(oxyethylene) nonylphenyl ether (Igepal CO-520)/water/cyclohexane microemulsions. The control of particle size was achieved by varying the water-to-surfactant molar ratio. The synthesized and calcined powders were characterized by thermogravimetry–differential thermal analysis (TGA-DTA), X-ray diffraction analysis (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and Fourier transform infrared spectroscopy (FTIR). Differential thermal analysis showed that LaAlO₃ phase transformation decreases with increase in water/surfactant (R) value. Pure LaAlO₃ phase was synthesized by annealing at 800 °C for 2 h in air directly from amorphous precursors, without formation of intermediate phase. The average particle size was found to increase with increase in water-to-surfactant ratio (R). FTIR analysis was carried to monitor the elimination of residual oil and surfactant phases from the microemulsion-derived precursor and calcined powder.     

In-situ size control and structural characterization of barium titanate nanocrystal prepared by crystallization of amorphous phase

We examined the influence of nanocrystalline particle size on the cubic-to-tetragonal phase transition of barium titanate (BaTiO₃). In-situ X-ray diffraction (XRD) and differential scanning calorimetry (DSC) were used in combination with electron microscopy to study the evolution of lattice structure and phase-transformation behavior with heat treatment and particle growth for BaTiO₃. The lattice constants were obtained for various polycrystal orientations in the diameter size range 10–90 nm. In-situ XRD results during the crystallization of amorphous 4BaTiO₃-SiO₂ revealed a critical size of ∼25 nm for the cubic-to-tetragonal phase transition of BaTiO₃ at room temperature.     

Optical properties of Ga3PO7 single crystals

Ga₃PO₇ crystal with size 18×15×12 mm³ and good optical quality has been grown by the top-seeded solution growth (TSSG) slow-cooling method from a Li₂O–3MoO₃ flux system. The Vickers microhardness and optical properties of the as-grown Ga₃PO₇ crystal have been carefully studied. The results show that the Ga₃PO₇ crystal belongs to the harder materials, and Meyer's index numbers for (1 1 0) and (0 0 1) planes were about 1.45 and 1.60, respectively. The Ga₃PO₇ crystal has a wide transmission range from 215 to 4300 nm. The smaller difference between the refractive indices values of n_o and n_e indicated that the Ga₃PO₇ crystal is an optically uniaxial negative crystal.     

Synthesis of Nb2O5·nH2O nanoparticles by water-in-oil microemulsion

Hydrous niobium oxide (Nb₂O₅·nH₂O) nanoparticles had been successfully prepared by water-in-oil microemulsion. They were characterized by X-ray diffraction (XRD), thermal analysis (TG/DTG), Fourier transform infrared spectroscopy (FTIR), BET surface area measurement, transmission electron microscopy (TEM), scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS). The results showed that the nanoparticle was exactly Nb₂O₅·nH₂O with spherical shape. Their BET surface area was 60 m² g⁻¹. XRD results showed that Nb₂O₅·nH₂O nanoparticles with crystallite size in nanometer scale were formed. The crystallinity and crystallity size increased with increasing annealing temperature. TT-phase of Nb₂O₅ was obtained when the sample is annealed at 550 °C.     

Growth of InxGa1−xN quantum dots by nitridation of nano-alloyed droplet method using MOCVD

In_xGa_1−xN quantum dots (QDs) were grown on GaN/sapphire (0 0 0 1) substrates by employing nitridation of nano-alloyed droplet (NNAD) method using metal-organic chemical vapor deposition (MOCVD). In+Ga alloy droplets were initially formed by flowing the precursors TMIn and TMGa. Density of the In+Ga alloy droplets was increased with increasing precursors flow rate; however, the droplet size was scarcely changed in the range of about 100–200 nm. Two cases of In_xGa_1−xN QDs growth were investigated by varying the nitridation time and the growth temperature. It was observed that the In_xGa_1−xN QDs size can be easily changed by controlling the nitridation process at the temperature between 680 and 700 °C for the time of 5–30 min. Self-assembled In_xGa_1−xN QDs were successfully grown by employing NNAD method.     

Synthesis,characterization and growing mechanism of monodisperse Fe3O4 microspheres

Monodisperse Fe₃O₄ microspheres assembled by a number of nanosize tetrahedron subunits have been selectively synthesized through the hydrothermal process. The synthesized Fe₃O₄ microspheres have good dispersibility. The subunits made up of microspheres were uniform in size and like-tetrahedron in shape. The average diameter of each Fe₃O₄ microsphere is about 50–55 μm. The length of each edge of tetrahedron is about 100 nm. A series of experiments had been carried out to investigate the effect of reductant, precipitator and reaction time on the formation of Fe₃O₄ microsphere and tetrahedron subunits. The results show that ascorbic acid as reductant and urea as precipitator supplied a relatively steady environment during the synthesis process and led to the formations of Fe₃O₄ tetrahedron subunit and monodisperse Fe₃O₄ microspheres. As the reaction time increased from 3 to 24 h, the Fe₃O₄ microspheres tended towards dispersion and becoming large in size from 10–20 to 50–55 μm, and the subunits formed Fe₃O₄ microspheres that varied from spheroid to tetrahedron and from a small nanoparticle (20–30 nm) to a large one (90–110 nm). A reasonable explanation for the formations of the Fe₃O₄ microsphere and the tetrahedron subunit was proposed through Ostwald ripening and the attachment growth mechanism, respectively.     

Synthesis and characterization of monolithic Gd2O3 aerogels

In this thesis, we will elaborate on the synthesis and characterization of monolithic Gd₂O₃ aerogel. We conducted the experiment in the following procedure. Use gadolinium nitrate or gadolinium chloride, a kind of inorganic gadolinium salt as raw material, and polymerize it in ethanol with propylene oxide as gelation initiator in the way of sol-gel. After this step, we can obtain the wet gel. Then, dry the wet gel by supercritical CO₂, at last we will get aerogel. The product has strong transparency and also shows some thermal stability. XRD characterization shows that it is amorphous. Nitrogen adsorption/desorption analysis tells clearly its surface area (223 m²/g), average pore diameters (42 nm) and large pore volume (1.83 ml/g). It is also characterized by transmission electron microscopy and high-resolution transmission electron microscopy.     

Structural transformation on Se0.8Te0.2 chalcogenide glass

Using X-ray diffraction and differential scanning calorimetry (DSC), the structure and the crystallization mechanism of Se_0.8Te_0.2 chalcogenide glass has been studied. The structure of the crystalline phase has been refined using the Rietveld technique. The crystal structure is hexagonal with lattice parameter a = 0.443 nm and c = 0.511 nm. The average crystallite size obtained using Scherrer equation is equal 16.2 nm, so it lies in the nano-range. From the radial distribution function, the short range order (SRO) of the amorphous phase has been discussed. The structure unit of the SRO is regular tetrahedron with (r₂/r₁) = 1.61. The Se_0.8Te_0.2 glassy sample obeys the chemical order network model, CONM. Some amorphous structural parameters have been deduced. The crystallization mechanism of the amorphous phase is one-dimensional growth. The calculated value of the glass transition activation energy (E_g) and the crystallization activation energy (E_c) are 159.8 ± 0.3 and 104.3 ± 0.51 kJ/mol, respectively.     

Tetragonal tungsten oxide nanobelts synthesized by chemical vapor deposition

Tungsten trioxide (WO₃) nanobelts in tetragonal structure were grown on Si substrates by a hot-wall chemical vapor deposition (CVD) method without using catalysts. The products were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), transmission electron microscopy (TEM), Raman spectroscopy, and photoluminescence (PL) spectrum. The width of the nanobelts is in the range of 50–100 nm with width-to-thickness ratios of 5–10 and lengths of up to tens of micrometers. These nanobelts grew along the [0 0 1] direction and can be identified as the tetragonal WO₃ structures. Raman and PL measurements indicate the high quality of the nanobelts. The vapor–solid growth mechanism could be applicable in our experiment.     

Ordered arrays of high-quality single-crystalline α-Si3N4 nanowires: Synthesis,properties and applications

Ordered arrays of high-quality single-crystalline α-Si₃N₄ nanowires (NWs) have been synthesized via thermal evaporation and detailed characteristics of the NWs have been analyzed by employing scanning electron microscope (SEM) along with energy dispersive spectroscopy (EDS), high-resolution transmission electron microscope (HRTEM), X-ray diffraction (XRD), X-ray photospectroscopy (XPS), infrared (IR), photoluminescence (PL) and in situ I–V measurements by STM/TEM holder. The microscopic results revealed that the NWs having diameter in the range of ~30–100 nm and length in microns. Furthermore, the NWs are found to be single crystalline grown along [0 0 1] direction. The elemental composition and valence states of elements are analyzed by EDS and XPS. The room temperature PL spectra exhibit a broad range visible emission band. The electron transport property of a single NW illustrates the symmetric I–V curve of a semiconductor. The possible growth mechanism is also briefly discussed.     

Effect of carbon on the microstructural evolution of Zr66.7−xNi33.3Cx (x = 0, 1, 3) alloys during mechanical alloying

In the present paper, the effect of carbon on the microstructural evolution of Zr_66.7−xNi_33.3C_x (x = 0, 1, 3) alloys during mechanical alloying has been investigated using X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The results show that these three alloys undergo similar amorphization and crystallization processes, and the final milling product is a metastable fcc-Zr_66.7−xNi_33.3C_x phase. The carbon addition can shorten the milling time for the complete amorphization reaction and enhance the stability of the formed amorphous alloy, which can suppress the mechanically induced amorphous-crystalline phase transformation with further increasing milling time.     

Phase separation and crystallization in the system SiO2-Al2O3-P2O5-B2O3-Na2O glasses

The phase separation and crystallization behavior in the system (80 − X)SiO₂ · X(Al₂O₃ + P₂O₅) · 5B₂O₃ · 15Na₂O (mol%) glasses was investigated. Glasses with X = 20 and 30 phase separated into two phases, one of which is rich in Al₂O₃-P₂O₅-SiO₂ and forms a continuous phase. Glasses containing a larger amount of Al₂O₃-P₂O₅ (X = 40 and 50) readily crystallize and precipitates tridymite type AlPO₄ crystals. It is estimated that the phase separation occurs forming continuous Al₂O₃-P₂O₅-SiO₂ phase at first, and then tridymite type AlPO₄ crystals precipitate and grow in this phase. Highly transparent glass-ceramics comparable to glass can be successfully obtained by controlling heat treatment precisely. The crystal size and percent crystallinity of these transparent glass-ceramics are 20-30 nm and about 50%, respectively.     

Synthesis and characterization of single-crystalline PrCO3OH dodecahedral microrods and its thermal conversion to Pr6O11

Single-crystalline PrCO₃OH dodecahedral microrods with an orthorhombic structure have been successfully synthesized by the hydrothermal method used urea as the precipitator. Pr₆O₁₁ dodecahedral microrods have been obtained by thermal conversion of PrCO₃OH dodecahedral microrods at 600 °C in air for 6 h. The as-synthesized products were characterized by X-ray powder diffraction, field-emission scanning electron microscope, transmission electron microscopy, high-resolution transmission electron microscopy, selected-area electron diffraction, X-ray photoelectron spectra, fourier transform infrared spectroscopy and thermogravimetry–differential thermal analysis. The effect of the reaction parameters on the morphology of the product has been investigated. The dodecahedral microrods with larger size and better crystallinity can be obtained under the higher reaction temperature. The possible formation mechanism of PrCO₃OH microrods was discussed.     

Electrical conductivity of NbN-SiO2 films obtained by ammonolysis of Nb2O5-SiO2 sol-gel derived coatings

The studies of electrical conductivity of NbN-SiO₂ films are reported. To obtain these films, sol-gel derived xNb₂O₅-(100 − x)SiO₂ (where x = 100, 90, 80, 70, 60, 50 mol%) coatings were nitrided at 1200 °C. The nitridation process leads to the formation of some disordered structures, with NbN metallic grains dispersed in insulating SiO₂ matrix. The structure of the samples was studied using X-ray diffraction (XRD) and atomic force microscopy (AFM). The electrical conductivity was measured with the conventional four-terminal method in the temperature range from 5 to 280 K. The superconducting transition was not observed even for the sample that does not contain silica. All the samples exhibit negative temperature coefficient of resistivity. The results of conductivity versus temperature may be described on the grounds of a model proposed for a weakly disordered system.     

Large-size and high-quality Zn2TiO4 single crystal grown by the optical floating zone method

Crack-free and transparent Zn₂TiO₄ single crystals of 4–6 mm in diameter and 30 mm in length have been grown by the optical floating zone method. The powder X-ray diffraction (XRD) results show that the as-grown crystals have the spinel-type Zn₂TiO₄ structure. XRD² measurements on Zn₂TiO₄ wafers cut perpendicular to the growth direction display only one peak at 42.7°, which indicates that the Zn₂TiO₄ single crystals grow along the 〈4 0 0〉 direction (a-axis). The formation of bubble inclusions was effectively suppressed by lowering rotation rate. Transmission polarized-light microscopy results showed that as-grown crystals were free of low angle grain boundaries.     

Structure of Ni/SiO2 films prepared by sol-gel dip coating

The sol-gel dip coating technique has been used to deposit composite oxide films (NiO)_x(SiO₂)_1−x with x = 0.1 on silicon wafers. Single and multilayer coatings allowed a variation of the film thickness from 70 to 400 nm. Film morphology, atomic structure and atomic composition have been investigated by transmission electron microscopy (TEM) and Rutherford backscattering spectrometry (RBS). The local environment of the Ni atoms was characterized by extended X-ray absorption fine structure (EXAFS). The samples were studied in the as-prepared state and after annealing in H₂ at 600 °C for 1 h. The structural and chemical state evolution of clusters present inside the silica matrix is discussed in terms of out-of-equilibrium reaction processes specific to low-dimensional objects and superficial effects.     

Crystallization kinetics of Fe73.5−xMnxCu1Nb3Si13.5B9 (x = 0, 1, 3, 5, 7) amorphous alloys

In this study, we have investigated the effect of substituting Mn for Fe on the crystallization kinetics of amorphous Fe_73.5−xMn_xCu₁Nb₃Si_13.5B₉ (x = 1, 3, 5, 7) alloys. The samples were annealed at 550 °C and 600 °C for 1 h under an argon atmosphere. The X-ray diffraction analyses showed only a crystalline peak belonging to the α-Fe(Si) phase, with the grain size ranging from 12.2 nm for x = 0 to 16.7 nm for x = 7. The activation energies of the alloys were calculated using Kissinger, Ozawa and Augis-Bennett models based on differential thermal analysis data. The Avrami exponent n was calculated from the Johnson-Mehl-Avrami equation. The activation energy increased up to x = 3, then decreased with increasing Mn content. The values of the Avrami exponent showed that the crystallization is typical diffusion-controlled three-dimensional growth at a constant nucleation rate.