基于气动力降阶模型的跨音速气动弹性稳定性分析

基于离散型输入输出差分模型,运用非定常CFD方法训练信号,然后运用最小二乘方法进行参数辨识,得到降阶的非定常气动力模型,再将该离散差分模型转换为连续时间域内的状态方程。耦合气动状态方程和结构状态方程,得到耦合系统的气动弹性状态方程。求解不同动压下状态矩阵的特征值,根据根轨迹图分析系统的稳定性特性。分析结果与直接耦合CFD/CSD方法结果相吻合,可以计算跨音速非线性气动弹性问题。其计算效率比直接耦合CFD/CSD方法提高1~2个数量级。针对Isogai wing在跨音速出现的S型颤振边界进行了较为细致的分析,阐述了该现象是由于系统诱发颤振的分支随着速度(来流动压)的提高而发生转移所导致的。     

跨音速极限环型颤振的高效数值分析方法

事先建立一个低阶的非线性、非定常气动力模型是开展非线性流场中气动弹性问题研究的一个捷径. 基于CFD方法, 通过计算结构在流场中自激振动的响应来获得系统的训练数据. 采用带输出反馈的循环RBF神经网络, 建立时域非线性气动力降阶模型.耦合结构运动方程和非线性气动力降阶模型, 采用杂交的线性多步方法计算结构在不同速度(动压)下的响应历程, 从而获得模型极限环随速度(动压)变化的特性. 两个典型的跨音速极限环型颤振算例表明, 基于气动力降阶模型方法的计算结果与直接CFD仿真结果吻合很好, 与后者相比其将计算效率提高了1~2个数量级.      

Efficient unsteady aerodynamic loads prediction based on nonlinear system identification and proper orthogonal decomposition

In the present work, an efficient surrogate-based framework is developed for the prediction of motion-induced surface pressure fluctuations and integral force and moment coefficients. The model construction is realized by performing forced-motion computational fluid dynamics (CFD) simulations, while the result is processed via the proper orthogonal decomposition (POD) to obtain the predominant flow modes. Subsequently, a nonlinear system identification is carried out with respect to the applied excitation and the resulting POD coefficients. For the input/output model identification task, a recurrent local linear neuro-fuzzy approach is employed in order to capture the linear and nonlinear characteristics of the dynamic system. Once the reduced-order model (ROM) is trained, it can substitute the flow solver within unsteady aerodynamic or aeroelastic simulation frameworks for a given configuration at fixed freestream conditions. For demonstration purposes, the ROM approach is applied to the LANN wing in high subsonic and transonic flow. Due to the characteristic lambda-shock system, the unsteady aerodynamic surface pressure distribution is dominated by nonlinear effects. Numerical investigations show a good correlation between the results obtained by the ROM methodology in comparison to the full-order CFD solution. In addition, the surrogate approach yields a significant speed-up regarding unsteady aerodynamic calculations, which is beneficial for multidisciplinary computations.     

Nonlinear dynamics of an aeroelastic airfoil with free-play in transonic flow

Nonlinear dynamic behaviors of an aeroelastic airfoil with free-play in transonic air flow are studied. The aeroelastic response is obtained by using time-marching approach with computational fluid dynamics (CFD) and reduced order model (ROM) techniques. Several standardized tests of transonic flutter are presented to validate numerical approaches. It is found that in time-marching approach with CFD technique, the time-step size has a significant effect on the calculated aeroelastic response, especially for cases considering both structural and aerodynamic nonlinearities. The nonlinear dynamic behavior for the present model in transonic air flow is greatly different from that in subsonic regime where only simple harmonic oscillations are observed. Major features of the responses in transonic air flow at different flow speeds can be summarized as follows. The aeroelastic responses with the amplitude near the free-play are dominated by single degree of freedom flutter mechanism, and snap-though phenomenon can be observed when the air speed is low. The bifurcation diagram can be captured by using ROM technique, and it is observed that the route to chaos for the present model is via period-doubling, which is essentially caused by the free-play nonlinearity. When the flow speed approaches the linear flutter speed, the aeroelastic system vibrates with large amplitude, which is dominated by the aerodynamic nonlinearity. Effects of boundary layer and airfoil profile on the nonlinear responses of the aeroelastic system are also discussed.     

基于非线性状态空间辨识的气动弹性模型降阶

高维、非线性气动弹性系统的模型降阶是当前气动弹性力学与控制领域的研究热点之一.然而国内外现有的非线性模型降阶方法仍存在辨识算法复杂、精度有待提高等问题.本研究提出了一种基于非线性状态空间辨识的跨音速气动弹性模型降阶方法. 首先,该方法基于非定常空气动力的单位脉冲响应数据,采用特征系统实现算法对非线性状态空间模型的线性动力学部分进行系统辨识. 其次,引入状态和控制输入的非线性函数, 采用优化算法对非线性函数的系数矩阵进行优化,进而得到考虑非线性效应的空气动力降阶模型.为了验证该降阶模型在预测跨音速气动弹性力学行为的精确性,本文以三维机翼为研究对象,分别从基于非线性降阶模型的气动力辨识、跨声速颤振边界计算和极限环振荡预测三方面进行了算例验证,并与现有的模型降阶方法进行了对比, 进一步说明本文所提出方法的有效性.研究结果表明, 该降阶模型对上述三类问题的计算精度与直接流-固耦合方法相吻合,可用于高效预测飞行器跨声速气动弹性力学行为.      

大长细比导弹的气动弹性降阶模型

对于大长细比导弹,需要在设计阶段准确计算气动弹性/气动伺服弹性,但其复杂的气动力给计算带来困难,因此气动力降阶模型是突破大长细比导弹跨音速气动弹性分析与控制瓶颈的关键技术.虽然气动力模型降阶方法已在预测二维机翼结构的气动弹性方面取得重要进展,但几乎未见关于全机模型的气动力降阶模型研究报道.本文基于递归Wiener模型的气动力降阶方法,利用CFD计算的气动力作为模型辨识数据,用鲁棒子空间和Levenberg-Marquardt算法辨识降阶模型参数,建立了大长细比导弹气动力降阶模型.在此基础上与大长细比导弹有限元模型相结合,构造出气动弹性降阶模型,并在数值仿真中测试气动弹性降阶模型在不同马赫数下的适用性.数值仿真结果表明,该气动弹性降阶模型能够精确预测导弹模型在不同飞行条件下的非定常气动力和导弹模型的气动弹性频率响应特性.     

An improved nonlinear reduced-order modeling for transonic aeroelastic systems

In this study, an improved nonlinear reduced-order model composed of a linear part and a nonlinear part is explored for transonic aeroelastic systems. The linear part is identified via the eigensystem realization algorithm and the nonlinear part is obtained via the Levenberg–Marquardt algorithm. The impulsive signal is chosen as the training signal for the linear part and the sinusoidal signal is used to determine the order of the linear part. The training signal for the nonlinear part is selected as the filtered white Gaussian noise with the maximal amplitude and frequency range to be designed via the aeroelastic responses. An NACA64A010 airfoil and an NACA0012 airfoil are taken as illustrative examples to demonstrate the performance of the presented reduced-order model in modeling transonic aerodynamic forces. The aeroelastic behaviors of the two airfoils are obtained via computational fluid dynamics to solve the Euler equation and the Navier–Stokes equation, respectively. The numerical results demonstrate that the presented reduced-order model can successfully predict the nonlinear aerodynamic forces with and without viscous flows. Moreover, the presented reduced-order model is capable of capturing the flutter velocity and modeling complex aeroelastic behaviors, including limit-cycle oscillations, beat phenomena and nodal-shaped oscillations at the transonic Mach numbers with high accuracy.     

Identification of Nonlinear Aeroelastic Systems Based on the Volterra Theory: Progress and Opportunities

The identification of nonlinear aeroelastic systems based on the Volterra theory of nonlinear systems is presented. Recent applications of the theory to problems in computational and experimental aeroelasticity are reviewed. Computational results include the development of computationally efficient reduced-order models (ROMs) using an Euler/Navier–Stokes flow solver and the analytical derivation of Volterra kernels for a nonlinear aeroelastic system. Experimental results include the identification of aerodynamic impulse responses, the application of higher-order spectra (HOS) to wind-tunnel flutter data, and the identification of nonlinear aeroelastic phenomena from flight flutter test data of the active aeroelastic wing (AAW) aircraft.     

基于随机森林算法的非定常气动力建模研究

针对现有的非定常气动力建模方法对气动弹性预测的准确性和效率问题,将随机森林算法引入非定常气动力建模研究领域,构建了基于随机森林算法的非定常气动力降阶模型。将所得模型用于预测气动弹性,选择二维NACA0012翼型进行颤振边界的预测,选用NACA64A010翼型预测LCO特性,并说明了该降阶模型建模的详细过程,将其计算结果与CFD/CSD耦合计算结果及试验结果进行了对比。研究结果表明,该模型可行、高效且精确,可以快速准确地预测飞行器气动弹性特性。     

基于ROM技术的阵风响应分析方法

阵风响应分析是大型飞机设计过程中必不可少的环节. 现有的阵风响应分析主要采用基于线化升力面理论的气动力模型,不能考虑到各种非线性效应,不适合于跨音速气动弹性的分析. 基于CFD技术,采用系统辨识方法,在状态空间内建立了降阶的非定常气动力模型(reduced order model, ROM). 耦合结构运动方程、非定常气动力模型(结构运动)、外激阵风的气动力模型,建立了基于CFD技术的阵风响应分析模型.算例研究了某一典型机翼在方波激励下的阵风响应问题,对比了各阶模态位移的响应以及翼根弯矩的响应. 基于ROM技术的计算结果与CFD/CSD直接耦合仿真结果吻合,证明了该方法的正确性和精度.      

Evaluation of linear,inviscid, viscous,and reduced-order modelling aeroelastic solutions of the AGARD 445.6 wing using root locus analysis

Reduced-order modelling (ROM) methods are applied to the Computational Fluid Dynamics (CFD)-based aeroelastic analysis of the AGARD 445.6 wing in order to gain insight regarding well-known discrepancies between the aeroelastic analyses and the experimental results. The results presented include aeroelastic solutions using the inviscid Computational Aeroelasticity Programme–Transonic Small Disturbance (CAP-TSD) code and the FUN3D code (Euler and Navier–Stokes). Full CFD aeroelastic solutions and ROM aeroelastic solutions, computed at several Mach numbers, are presented in the form of root locus plots in order to better reveal the aeroelastic root migrations with increasing dynamic pressure. Important conclusions are drawn from these results including the ability of the linear CAP-TSD code to accurately predict the entire experimental flutter boundary (repeat of analyses performed in the 1980s), that the Euler solutions at supersonic conditions indicate that the third mode is always unstable, and that the FUN3D Navier–Stokes solutions stabilize the unstable third mode seen in the Euler solutions.     

Aeroelastic analysis of a rotating wind turbine blade using a geometrically exact formulation

In this paper, an aeroelastic analysis of a rotating wind turbine blade is performed by considering the effects of geometrical nonlinearities associated with large deflection of the blade produced during wind turbine operation. This source of nonlinearity has become more important in the dynamic analysis of flexible blades used in more recent multi-megawatt wind turbines. The structural modeling, involving the coupled edgewise, flapwise and torsional DOFs, has been performed by using a nonlinear geometrically exact beam formulation. The aerodynamic model is presented based on the strip theory, by applying the principles of quasi-steady and unsteady airfoil aerodynamics. Compared to the conventional steady aerodynamic model, the presented model offers a more realistic consideration of fluid–structure interactions. The resulting governing equation, expanded up to the third-order terms, is analyzed by using the reduced-order model (ROM). The ROM is developed by employing the coupled mode shapes of a cantilever blade under free loading condition. The specifications of the 5MW-NREL wind turbine are used in the simulation study. After verifying the ROM results by comparing them with those of the full FEM model, the model is used in additional static, modal and transient dynamics analyses. The results indicate the important effect of geometrical nonlinearity, especially for larger structural deformations. Moreover, nonlinear analyses reveal the important effects of torsion induced by lateral deformations. It is also found that the governing equation is more efficient, and sufficiently accurate, when it is developed by using the second-order kinetic terms, third-order potential terms and the second-order aerodynamic terms together with third-order damping. Finally, the effects of nonlinearities on the flutter characteristics of wind turbine blades are evaluated through frequency and dynamic analyses.     

两种湍流模型时域颤振计算方法研究

采用时域计算分析方法进行了机翼跨音速颤振特性研究。在结构运动网格的基础上,采用格点格式有限体积方法进行空间离散和双时间全隐式方法进行时间推进求解雷诺平均N-S方程。针对流动粘性分别应用了SST湍流模型和SSG雷诺应力模型,通过对跨音速标模算例AGARD445.6机翼的计算结果与实验值的对比分析,其中应用SST湍流模型得到的颤振速度与实验值最为接近,特别是在跨音速段平均相对误差在3%以内;并且计算结果整体上反映了跨音速颤振"凹坑"物理特性,验证了方法的有效性。     

Engine Modeling for Small-Disturbance-CFD Related to Aircraft Flutter Investigations

Aeroelastic behavior of aircraft is significantly affected by the presence of engines mounted under the wings. Powered engines influence the unsteady aerodynamics on the one hand and lead to additional unsteady forces due to thrust vector oscillations on the other hand. This work focuses on the incorporation of aerodynamic engine effects into a small disturbance CFD framework to enhance the modeling accuracy of unsteady aerodynamics of aircraft. The effects are numerically modeled by mimicking physically reasonable flow conditions at the intake and nozzle planes of the engine nacelle. Subsequently, the influence of the engine effects on the flutter behavior of an aircraft is studied employing the small-disturbance-CFD-based flutter analysis. The basis for the investigation is the Common Research Model, which represents a modern transonic commercial airliner with a cruise Mach number of 0.85. Two configurations are considered: aircraft with passive engines represented by flow-through nacelles and aircraft with powered engines, where the novel small disturbance engine model is applied. The results are compared in terms of the flutter trends and the predicted flutter boundary. Furthermore, the impact of the modal induced thrust oscillations on the aeroelastic behavior of the aircraft is discussed.     

基于CFD的气动力建模及其在气动弹性中的应用

CFD技术为带有气动力非线性的气动弹性分析提供了一种研究途径,但是基于CFD的气动弹性直接数值模拟方法的计算量很大,不便开展定性分析和参数设计.基于CFD的非定常气动力模型的降阶技术为缓解计算效率与计算精度之间的矛盾以及系统的复杂性与易分析、易设计性之间的矛盾提供了行之有效的技术途径.综述了近年来发展的两类基于CFD技术的非定常气动力降阶技术和一种非线性气动力的谐波平衡方法,以及这些方法在非线性气动弹性研究中的运用.对比了各种方法的优越性并作了进一步的展望.      

一种高效的叶轮机叶片气动阻尼计算方法

运用叠加原理, 发展了一种可以运用于小振幅运动的叶轮机叶片非定常气动力降阶模型, 并将该模型与传统的能量法相结合, 提出了一种叶轮机叶片气动阻尼的高效求解方法. 运用该方法求解叶轮机叶片的气动阻尼系数, 对某个频率、某个模态只需要进行一次非定常计算, 就可以求出所有叶间振动相角下的气动阻尼系数, 提高了气动阻尼的求解效率. 在STCF4和NASA Rotor67两个算例上运用非定常雷诺平均N-S(RANS)方程和提出的降阶模型进行了对比计算.算例表明, 在小振幅下该方法的计算结果与RANS方程计算得到的气动阻尼系数能很好地吻合, 而计算效率相比多通道非定常RANS方程计算提升了近一个数量级, 并且该方法还可以运用于有失谐情况的颤振分析, 在工程上有较高的应用价值.      

基于SCI/ERA方法的高效气动力降阶模型

由正交Walsh函数构造Walsh-单信号-复合-输入,对其作用下的计算流体力学响应采用单信号-复合-输入/特征系统实现算法SCI/ERA(Single-Composite-Input/Eigensystem Realization Algorithm)辨识得到离散时间非定常气动力状态空间降阶模型。通过对Isogai机翼剖面气动弹性算例的计算证明该方法具有和非定常计算流体力学方法相当的精度同时模型维数降低2个数量级;在模型构造时间上,SCI/ERA方法比脉冲/ERA方法计算效率提高24%,同时内存占用减小34%;由理论分析可知当耦合结构模态数目增加时,SCI/ERA方法所需的计算开销增幅远小于脉冲/ERA方法;采用频域平衡特征正交分解BPOD(Balanced Proper Orthogonal Decomposition)方法可以准确地从降阶模型中提取出一个低频二次降阶模型,同时保持与原模型相当的精度。二次降阶后模型维数进一步减小88%。     

Interpolation-based reduced-order modelling for steady transonic flows via manifold learning

This paper presents a parametric reduced-order model (ROM) based on manifold learning (ML) for use in steady transonic aerodynamic applications. The main objective of this work is to derive an efficient ROM that exploits the low-dimensional nonlinear solution manifold to ensure an improved treatment of the nonlinearities involved in varying the inflow conditions to obtain an accurate prediction of shocks. The reduced-order representation of the data is derived using the Isomap ML method, which is applied to a set of sampled computational fluid dynamics (CFD) data. In order to develop a ROM that has the ability to predict approximate CFD solutions at untried parameter combinations, Isomap is coupled with an interpolation method to capture the variations in parameters like the angle of attack or the Mach number. Furthermore, an approximate local inverse mapping from the reduced-order representation to the full CFD solution space is introduced. The proposed ROM, called Isomap+I, is applied to the two-dimensional NACA 64A010 airfoil and to the 3D LANN wing. The results are compared to those obtained by proper orthogonal decomposition plus interpolation (POD+I) and to the full-order CFD model.     

基于特征正交分解的非定常气动力建模技术

采用特征正交分解(proper orthogonal decomposition, POD)方法, 建立了基于状态空间的非定常气动力降阶模型, 并耦合结构方程, 建立了降阶的气动弹性系统, 开展了颤振分析的初步研究, 计算效率提高了2~3个数量级. 具体过程是:首先获取全阶系统的频域快照构成关联矩阵, 通过对关联矩阵进行奇异值分解提取流场模态(或流场基), 对低能量模态截断形成降阶子空间, 并将其映射到全阶系统, 从而形成基于状态空间的降阶非定常气动力模型. 对气动弹性标模AGARD445.6进行算例验证, 证明了降阶方法正确, 可以提供高效、高精度的气动弹性分析.