大学物理《力学》中的自由度分析

对《力学》中的物体自由度进行多方面分析,以深化教学、提高学生正 确分析物理问题的能力.使用实际教学分析的研究方法,在《力学》范围内讨论自由度与坐标、 自由与约束的关系并得以下结论: (1) 同一物体的自由度随其所在的``空间'不同而不同, 不因坐标系的选取不同而 异, 在同类参考系中不因参考系的动静而有别;(2)自由度遵循叠加原理. 讨论了质点系的总自由度及相关计算问题,并指出研究《力学》中自由度的意义.     

Development and design of new methods of measurement of state of strain of structures

The present paper deals with development and design of new methods utilizing Wiedemann's effect for determination of state of strain in building structures. Wiedemann's effect and some features of torsional strain of magnetic field are the basis of new experimental method. Especially the point electromagnetic strain gages using the effect of pure torsion of electromagnetic field to enable universal examination. For strain-gage measurements, almost all physical quantities are used which can be related to the variation in length of the structures. From the electric strain measurements, the most commonly used methods are the measurements by resonance-wire strain gages or by electric-resistance strain gages. In this paper, electromagnetic strain gages are discussed using the Wiedemann effect, and the author describes some new measuring equipment and his own suggestions and methods based on an application of this effect.     

Method of constructing estimates of the solution of equations of filtration of an aerated liquid

The exact solutions of the nonlinear equations of filtration of an aerated liquid have been obtained in [1–3]. In [4] the system of equations of an aerated liquid have been reduced to the heat-conduction equation under certain assumptions. An approximate method of computing the nonsteady flow of an aerated liquid is given in [5], where the real flow pattern is replaced by a computational scheme of successive change of stationary states. In [6] the same problem is solved by the method of averaging. In the present article estimates of the solution of the equations for nonstationary filtration of an aerated liquid in one-dimensional layer are constructed under certain conditions imposed on the desired functions. These estimates can be used as approximate solutions with known error or for the verification of the accuracy of different approximate methods. We note that the use of comparison theorem for the estimate of solutions of equations of nonlinear filtration is discussed in [7–9]. The methods of constructing estimates of solutions of various problems of heat conduction are given in [10, 11]     

Method of calculation of interaction of wall flows

A flow of viscous compressible fluid in the neighborhood of the line of interaction of wall flows is considered. A method of calculating the line of interaction and the direction of the self-induced secondary flow is developed. Papers [1–3] are devoted to the simulation of a separation flow with singularities in the neighborhood of singular lines and points, where boundary-layer equations are invalid. However, the theories of local separation used at present have mainly been developed only for two-dimensional problems, while the models of viscous-inviscid interaction have restrictions in application for turbulent flows with developed separation. The interaction of three-dimensional wall turbulent flows is considered below. It is assumed that the thickness of the boundary layers and the scales of the interaction zones are small in comparison with the characteristic dimension of the system, while the line of discontinuity of the solutions of the three-dimensional boundary layer equations is the same as the line of interaction of the wall flows.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 2, pp. 53–59, March–April, 1987.The author is grateful to G. Yu. Stepanov and V. N. Ershov for their interest in my work and their valuable remarks.     

Calculation of aerodynamic characteristics of arrays of profiles of arbitrary shape

It is well known that the problem on nonseparating potential flow of an incompressible fluid about an array of profiles reduces to an integral equation for a certain real function, determined on the contours of the profiles of the array. As such a function one can take, as was done, for instance, in [1–5], the relative velocity of the fluid on the profiles of the array. For arrays of profiles of arbitrary shape it is necessary to solve the corresponding integral equation numerically. In the particular examples of the calculation of aerodynamic arrays that are available [1–3] the numerical methods used were based on the approximate evaluation of contour integrals by rectangle formulas. As investigations showed, sizeable errors arose thereby in the approximate solution obtained, these being especially significant in the case of curved profiles of relatively small bulk. In the present paper a method for the numerical solution of the integral equation obtained in [5] is proposed. The method is based on the replacement of a profile of the array with an inscribed N polygon, the length of whose sides is of the order N^–1 and whose internal angles are close to . Convergence with increasing N of the numerical solution to an exact solution of the integral equations at the reference points is demonstrated. Examples of the calculation are given.Novosibirsk. Translated from Izvestiya Akademii Nauk SSSR. Mekhanika Zhidkosti i Gaza, No. 2, pp. 105–112, March–April, 1972.     

Equations of oscillations of rods of variable composition

We obtain differential equations for the general case of longitudinal, torsional, and transverse oscillations of rods to some parts of which masses are being added or detached. We solve certain special problems concerning the oscillations of such rods of variable composition. In deriving generalized equations of oscillations of rods of variable composition we employ the assumption of planar sections, the assumption of small deformations, and other customary simplifications. We also employ the simplifying assumption of close action; i.e., we assume that the masses being detached and added interact with the rod only at the instant of direct contact. Forces of internal nonelastic resistance are not taken into account. We assume also that in the undeformed state the elastic axis is rectilinear and that the centers of gravity of cross sections are not displaced from their initial positions relative to the cross sections. There may be a change of mass per unit length of the rod both on account of a change in density as well as on account of a change in area of a cross section, the latter being understood to be the union of the initial area of the cross section and the areas of the parts being added and detached. In addition, with the rod there may be associated particles of variable mass distributed continuously or discretely along the length of the rod. We assume that these particles do not interact among themselves but only with the rod.Translated from Zhurnal Prikladnoi Mekhaniki i Tekhnicheskoi Fiziki, No. 1, pp. 103–108, January–February, 1972.     

Existence of solutions of systems of partial differential equations of fractional order

We obtain sufficient conditions for the existence and uniqueness of a solution of a system of partial differential equations of fractional order in spaces of integrable functions.Translated from Neliniini Kolyvannya, Vol. 7, No. 3, pp. 328–335, July–September, 2004.     

Experiments of free vibration of shells of revolution

This paper presents experimental techniques used in and results obtained during a series of experiments performed to investigate the free-vibration behavior of 15-in. base-diameter spherical and paraboloidal shell models of various geometric parameters and boundary conditions. The models were manufactured from polyvinyl-chloride (P.V.C.) sheets by a thermo-vacuum process using special molds and templates. To provide the necessary excitation power, a variable control amplitude/frequency audio oscillator was used to drive a loudspeaker which was mounted underneath the models. A recently developed noncontact fiber-optics instrument, referred to as the “Fotonic Sensor”, was employed in determining the motion of the models. Thirty-two models of different configurations and boundary conditions were tested in the series. The natural frequencies were observed for all models, while the mode shapes associated with the first four-to-six resonant frequencies were mapped only for some of the models, using special scanning devices.     

Applications of the group of equations of motion of a polytropic gas

The machinery of Lie theory (groups and algebras) is applied to the system of equations governing the unsteady flow of a polytropic gas. The action on solutions of transformation groups which leave the equations invariant is considered. Using the invariants of the transformation groups, various symmetry reductions are achieved in both the steady state and the unsteady cases. These reduce the system of partial differential equations to systems of ordinary differential equations for which some closed-form solutions are obtained. It is then illustrated how each solution in the steady case gives rise to time-dependent solutions.     

Experience of optimization of aerodynamic characteristics of airfoils

The complex approach developed previously for the numerical solution of problems of optimization and designing of airfoils is applied to solve the problem of increasing the lifttodrag ratio of subsonic airfoils used.     

Assessment of ease of excavation of surface mines

An empirical ground classification system for surface mines is presented. It is designed to provide a means for determining the ease of excavation, diggability, by mechanical excavators. The background and the methodology for determining this excavation index is introduced. This index, which is suitable for rock characterization relies on the point load index of the rock, its block size as defined by the presence of discontinuities. The system is also flexible to account for the influence of weathering as well as the relative ground structure which may assist or hinder the excavation process. The economic consequences of selecting mining excavation equipment are also addressed. The Excavation Index was applied with success to 49 case studies (Hadjigergiou, J. Studies of machine ground interaction in surface mines. Ph.D. thesis, McGill University, 1993, p. 214).     

Diagonalization of a three-dimensional system of equations in terms of displacements of the linear theory of elasticity of transversely isotropic media

A dynamic three-dimensional system of linear equations in terms of displacements of the theory of elasticity of transversely isotropic media is given explicit expressions for phase velocities and polarization vectors of plane waves. All the longitudinal normals are found. For some values of the elasticity moduli, the system of equations is reduced to a diagonal shape. For static equations, all the conditions of the system ellipticity are determined. Two new representations of displacements through potential functions that satisfy three independent quasi-harmonic equations are given. Constraints on elasticity moludi, at which the corresponding coefficients in these representations are real, different, equal, or complex, are determined. It is shown that these representations are general and complete. Each representation corresponds to a recursion (symmetry) operator, i.e., a formula of production of new solutions.     

Doubling of the period of oscillation of a pendulum of variable length

Kiev Institute of Construction Engineering. Translated from Prikladnaya Mekhanika, Vol. 26, No. 6, pp. 74–80, June, 1990.     

Stabilization of solutions of the nonlinear equation of filtration of a two-phase liquid

The asymptotic behavior (with unlimited increase in time) of solutions of boundary-value problems for the filtration equation for a two-phase liquid that describe the displacement of immiscible incompressible liquids from a bed is studied. Convergence of these solutions to the unique solution of the steady problem (stabilization) is established, and, under additional assumptions, the rate of convergence is evaluated. Lavrent’ev Institute of Hydrodynamics, Siberian Division, Russian Academy of Sciences, Novosibirsk 630090. Translated from Prikladnaya Mekhanika i Tekhnicheskaya Fizika, Vol. 40, No. 3, pp. 30–36, May–JJune, 1999.     

两自由度振动系统的斜碰撞分析

研究斜碰撞振动系统动力学的一个关键问题是对系统在碰撞前后的状态进行合理描述和正确计算．针对两弹性体斜碰撞问题，基于瞬间碰撞假设，提出了采用步进冲量来分析和求解斜碰撞前后的状态关系；并以弹簧摆和振子组成的两自由度斜碰撞振动系统为例，具体介绍了该算法如何实现．用解析方法讨论了该系统在斜碰撞过程中可能出现的各种力学现象，将冲量步进算法得到的数值解与解析结果进行对比，取得了完全一致的结果．该数值方法能适应多种斜碰撞问题的计算．     

Calculation of spatial vibrations of plates of complex shape

We consider problem of the spatial vibrations of plates with complex shape within Timoshenko's theory of plates. We write the constitutive equations in a local oblique coordinate system where all the bounding contours coincide with coordinate lines. We have demonstrated the effectiveness of the proposed method using as an example the vibration of a rectangular plate weakened by a regular hexagonal hole under the action of an impulsive surface load. We analyze the effect of nonlinear terms on the frequency and amplitude of normal displacements of the shell as a function of the load amplitude. S. P. Timoshenko Institute of Mechanics. National Academy of Sciences of Ukraine, Kiev. Translated from Prikladnaya Mekhanika, Vol. 35, No. 8, pp. 44–53, August, 1999.     

Homogenization of the equations of the Cosserat theory of elasticity of inhomogeneous bodies

The paper deals with the homogenization of a boundary value problem for an inhomogeneous body with Cosserat properties, which is referred to as the original problem. The homogenization process is understood as a method for representing the solution of the original problem in terms of the solution of precisely the same problem for a body with homogeneous properties. The problem for a body with homogeneous properties is called the accompanying problem, and the body itself, the accompanying homogeneous body. As a rule, a constructive homogenization procedure includes the following three stages: at the first stage, the properties of the inhomogeneous body are used to find the properties of the accompanying homogeneous body (efficient properties); at the second stage, the boundary value problem is solved for the accompanying body; at the third stage, the solution of the accompanying problem is used to find the solution of the original problem. This approach was implemented in mechanics of composite materials constructed of numerous representative elements. A significant contribution to the development of mechanics of composites is due to Rabotnov [1–3] and his students. Recently, the homogenization method has been widely used to solve problems for composites of regular structure by expanding the solution of the original problem in a power series in a small geometric parameter equal to the ratio of the characteristic dimension of the periodicity cell to the characteristic dimension of the entire body. The papers by Bakhvalov [4–6] and Pobedrya [7] were the first in the field. At present, there are numerous monographs partially or completely dealing with the method of a small geometric parameter [8–14]. Isolated problems for inhomogeneous bodies with nonperiodic dependence of their properties on the coordinates were considered by many authors. Most of such papers published before 1973 are collected in two vast bibliographic indices [15, 16]. General methods were considered, and many specific problems of the theory of elasticity of continuously inhomogeneous bodies were solved in Lomakin’s papers and his monograph [17]. The theory of torsion of inhomogeneous anisotropic rods was considered in [18]. In 1991, in his Doctoral dissertation, one of the authors of this paper proposed a version of the homogenization method based on an integral formula representing the solution of the original static problem of inhomogeneous elasticity via the solution of the accompanying problem [19, 20]. An integral formula for the dynamic problem of elasticity was published somewhat later [21]. This integral formula was used to develop a constructive method for the homogenization of the dynamic problem of inhomogeneous elasticity, which can be used in the case of both periodic and nonperiodic inhomogeneity of the properties [22]. The integral formula in the case of the Cosserat theory of elasticity was published in [23]. The present paper briefly presents constructive methods for homogenizing the problems of the Cosserat theory of elasticity based on the integral formula.     

Solution of boundary-value problems of the theory of elasticity by numerical realization of the method of compensating loads

Kharkov Institute of Construction Engineering. Translated from Prikladnaya Mekhanika, Vol. 25, No. 12, pp. 101–107, December, 1989.     

The distribution of zeroes of solutions of neutral equations

1.IntroductionThestudyofoscillator}'behaviorofneutraldifferentialequationsisarelativealnewfieldandisveryinterestinginapplications.Inrecentyears.theoscillatorytheoryfortheseequationshasbeenextensivelydeveloped.WerefertotherecentbookbyGyoriandLadaSI'I,Baino…     

Minimization of the drag of blunt edges of projecting elements of a hypersonic object

An approximate method is given for calculating the pressure on the critical line of a cylindrical edge of an element projecting above the surface of a hypersonic object. Correlations of the pressure distribution in the interference regions are proposed on the basis of the calculations and analysis of the experimental data. Variational problems of finding the form of a leading edge having minimum drag are set up and solved on the basis of the pressure calculation model obtained. The solutions are sought with the use of Pontryagin's maximum principle. The effect on the minimum drag profile of Mach numbers and blunting of the body is analyzed. The advantage of the optimal form of the edge in comparison with a corresponding rectilinear edge is shown.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 3, pp. 3–9, May–June, 1976.