Influence of vertical internals on a bubbling fluidized bed characterized by X-ray tomography

An ultra-fast X-ray tomographic scanner is applied to study the hydrodynamics in a bubbling fluidized bed with and without vertical internals (e.g., heat exchanger tubes). The objective of this study is to understand the influence of vertical internals on hydrodynamic properties such as bubble volume, size and velocity and to provide measurement data for the design and scale-up of catalytic bubbling fluidized bed reactors with vertical internals. With these new measurements, correlations of bubble properties can be developed to reliably scale-up bubbling fluidized beds with vertical internals. For the investigated reactor with Geldart A/B particles, no relation between bubble size and velocity was observed for individual bubbles, i.e.; smaller bubbles tend to rise with higher velocities. A significant reduction in bubble size and sharpening of the bubble size distribution was generally obtained for a bed with vertical internals.     

Dual characters of interaction between particles and fluid

The unique characteristics of gas-solids two-phase flow and fluidization in terms of the flow structures and the apparent behavior of particles and fluid-particle interactions are closely linked to physical properties of the particles, operating conditions and bed configurations. Fluidized beds behave quite differently when solid properties, gas velocities or vessel geometries are varied. An understanding of hydrodynamic changes and how they, in turn, influence the transfer and reaction characteristics of chemical and thermal operations by variations in gas-solid contact, residence time, solid circulation and mixing and gas distribution is very important for the proper design and scale-up of fluidized bed reactors. In this paper, rather than attempting a comprehensive survey, we concentrate on examining some important positive and negative impacts of particle sizes, bubbles, clusters and column walls on the physical and chemical aspects of chemical reactor performance from the engineering application point of view with the aim of forming an adequate concept for guiding the design of multiphase fluidized bed chemical reactors.One unique phenomenon associated with particle size is that fluidized bed behavior does not always vary monotonically with changing the average particle size. Different behaviors of particles with difference sizes can be well understood by analyzing the relationship between particle size and various forces. For both fine and coarse particles, too narrow a distribution is generally not favorable for smooth fluidization. A too wide size distribution, on the other hand, may lead to particle segregation and high particle elutriation. Good fluidization performance can be established with a proper size distribution in which inter-particle cohesive forces are reduced by the lubricating effect of fine particles on coarse particles for Type A, B and D particles or by the spacing effect of coarse particles or aggregates for Type C powders.Much emphasis has been paid to the negative impacts of bubbles, such as gas bypassing through bubbles, poor bubble-to-dense phase heat & mass transfer, bubble-induced large pressure fluctuations, process instabilities, catalyst attrition and equipment erosion, and high entrainment of particles induced by erupting bubbles at the bed surface. However, it should be noted that bubble motion and gas circulation through bubbles, together with the motion of particles in bubble wakes and clouds, contribute to good gas and solids mixing. The formation of clusters can be attributed to the movement of trailing particles into the low-pressure wake region of leading particles or clusters. On one hand, the existence of down-flowing clusters induces strong solid back-mixing and non-uniform radial distributions of particle velocities and holdups, which is undesirable for chemical reactions. On the other hand, the formation of clusters creates high solids holdups in the riser by inducing internal solids circulations, which are usually beneficial for increasing concentrations of solid catalysts or solid reactants.Wall effects have widely been blamed for complicating the scale-up and design of fluidized-bed reactors. The decrease in wall friction with increasing the column diameter can significantly change the flow patterns and other important characteristics even under identical operating conditions with the same gas and particles. However, internals, which can be considered as a special wall, have been used to improve the fluidized bed reactor performance.Generally, desirable and undesirable dual characteristics of interaction between particles and fluid are one of the important natures of multiphase flow. It is shown that there exists a critical balance between those positive and negative impacts. Good fluidization quality can always be achieved with a proper choice of right combinations of particle size and size distribution, bubble size and wall design to alleviate the negative impacts.     

Modeling and simulation of circulating fluidized bed reactors applied to a carbonation/calcination loop

A fluid dynamic model for a gas-solid circulating fluidized bed （CFB） designed using two coupled riser reactors is developed and implemented numerically with code programmed in Matlab. The fluid dynamic model contains heat and species mass balances to calculate temperatures and compositions for a carbonation/calcination loop process. Because of the high computational costs required to resolve the three-dimensional phenomena, a model representing a trade-offbetween computational time requirements and accuracy is developed. For dynamic processes with a solid flux between the two reactor units that depends on the fluid dynamics of both risers, a dynamic one-dimensional two-fluid model is sufficient. A two-fluid model using the constant particle viscosity closure for the stress term is used for the solid phase, and an algebraic turbulence model is applied to the gas phase. The numerical model implementa- tion is based on the finite volume method with a staggered grid scheme. The exchange of solids between the reactor units constituting the circulating fluidized bed （solid flux） is implemented through additional mass source/sink terms in the continuity equations of the two phases, For model validation, a relevant experimental analysis provided in the literature is reproduced by the numerical simulations, The numerical analysis indicates that sufficient heat integration between the two reactor units is important for the performance of the circulating fluidized bed system, The two-fluid model performs fairly well for this chemical process operated in a CFB designed as two coupled riser reactors. Further analysis and optimization of the solution algorithms and the reactor coupling strategy is warranted.     

Effects of initial static bed height on fractional conversion and bed pressure drop in tapered-in and tapered-out fluidized bed reactors

In this article, a standard 2D Two-Fluid Model (TFM) closed by the kinetic theory of granular flow (KTGF) has been applied to simulate the behavior of tapered-in and tapered-out fluidized bed reactors. In this regard, two types of chemical reactions with gas volume reduction and increase were considered to investigate the effects of initial static bed height on the fractional conversion and bed pressure drop. To validate the CFD model predictions, the results of hydrodynamic simulations concerning bed pressure drop and bed expansion ratio were compared against experimental data reported in the literature and excellent agreement was observed. The obtained simulation results clearly indicate that there is an appropriate static bed height in a tapered-in reactor in which the fractional conversion becomes maximum at this height; whereas variations of static bed height in a tapered-out reactor have insignificant influences on the fractional conversion. Moreover, it was found that the residence time, temperature, and intensity of turbulence of the gas phase are three important factors affecting the fractional conversion in tapered fluidized bed reactors. In addition, it was observed that increasing the static bed height increases the bed pressure drop for both the tapered-in and tapered-out fluidized bed reactors.     

Modeling and simulation of circulating fluidized bed reactors applied to a carbonation/calcination loop

A fluid dynamic model for a gas-solid circulating fluidized bed (CFB) designed using two coupled riser reactors is developed and implemented numerically with code programmed in Matlab. The fluid dynamic model contains heat and species mass balances to calculate temperatures and compositions for a carbonation/calcination loop process.Because of the high computational costs required to resolve the three-dimensional phenomena, a model representing a trade-off between computational time requirements and accuracy is developed. For dynamic processes with a solid flux between the two reactor units that depends on the fluid dynamics of both risers, a dynamic one-dimensional two-fluid model is sufficient.A two-fluid model using the constant particle viscosity closure for the stress term is used for the solid phase, and an algebraic turbulence model is applied to the gas phase. The numerical model implementation is based on the finite volume method with a staggered grid scheme. The exchange of solids between the reactor units constituting the circulating fluidized bed (solid flux) is implemented through additional mass source/sink terms in the continuity equations of the two phases.For model validation, a relevant experimental analysis provided in the literature is reproduced by the numerical simulations. The numerical analysis indicates that sufficient heat integration between the two reactor units is important for the performance of the circulating fluidized bed system.The two-fluid model performs fairly well for this chemical process operated in a CFB designed as two coupled riser reactors. Further analysis and optimization of the solution algorithms and the reactor coupling strategy is warranted.     

Influence of drag laws on pressure and bed material recirculation rate in a cold flow model of an 8 MW dual fluidized bed system by means of CPFD

A cold flow model of an 8 MW dual fluidized bed (DFB) system is simulated using the commercial computational particle fluid dynamics (CPFD) software package Barracuda. The DFB system comprises a bubbling bed connected to a fast fluidized bed with the bed material circulating between them. As the hydrodynamics in hot DFB plants are complex because of high temperatures and many chemical reaction processes, cold flow models are used. Performing numerical simulations of cold flows enables a focus on the hydrodynamics as the chemistry and heat and mass transfer processes can be put aside. The drag law has a major influence on the hydrodynamics, and therefore its influence on pressure, particle distribution, and bed material recirculation rate is calculated using Barracuda and its results are compared with experimental results. The drag laws used were energy-minimization multiscale (EMMS), Ganser, Turton–Levenspiel, and a combination of Wen–Yu/Ergun. Eleven operating points were chosen for that study and each was calculated with the aforementioned drag laws. The EMMS drag law best predicted the pressure and distribution of the bed material in the different parts of the DFB system. For predicting the bed material recirculation rate, the Ganser drag law showed the best results. However, the drag laws often were not able to predict the experimentally found trends of the bed material recirculation rate. Indeed, the drag law significantly influences the hydrodynamic outcomes in a DFB system and must be chosen carefully to obtain meaningful simulation results. More research may enable recommendations as to which drag law is useful in simulations of a DFB system with CPFD.     

Influence of vertical heat exchanger tubes,their arrangement and the column diameter on the hydrodynamics in a gas–solid bubbling fluidized bed

The hydrodynamic behavior of a cold-flow gas–solid fluidized bed with an inner diameter of 22 cm is investigated by means of an ultra-fast X-ray tomographic setup. In the case of an exothermal reaction, heat exchanger tubes are required to remove the reaction heat out of the bubbling fluidized bed reactor. For the examined cold-flow model, the heat exchanger tubes are replaced by vertical internals that serve as placeholder. The influence of vertical internals on the bubble properties for different spatial configurations (square and circular arrangements) is investigated in addition to measurements without internals. Furthermore, the hydrodynamic results of the Ø 22 cm column are compared with an available data set which is based on measurements that were conducted in a column with an inner diameter of 14 cm. The objective of this paper is to provide measurement data for the scale-up process as well as for various computer models simulating a bubbling fluidized bed with vertical internals. It was found that the scale-up process from pilot plants to an industrial scale may be simplified if vertical internals are present, independently of the geometric arrangement.     

Particle-scale and sub-grid drag models coupled CFD for simulating the CO methanation in a CFB riser

The diffusion and chemical reactions inside the catalyst particles and the heterogeneous flow structure in the computational cells are key factors to affect the accuracy of the coarse-grid simulation in circulating fluidized bed (CFB) methanation reactors. In this work, a particle-scale model is developed to calculate the effective reaction rate considering the transient diffusion and chemical reactions in the particle scale, i.e., the scale of the single catalyst particle. A modified sub-grid drag model is proposed to consider the effects of the meso-scale and chemical reactions on the heterogeneous gas-solid interaction, where the meso-scale is between the single particle and the whole reactor and featured with the particle cluster. Subsequently, a coupled model is developed by integrating the particle-scale and modified sub-grid drag models into CFD. Moreover, the coupled model is validated to achieve accurate predictions on the CO methanation process in a CFB riser. Notably, the coupled model can be performed with a coarse grid (∼58 times particle diameter) and a large time step (0.005 s) to accelerate the simulation. By simply changing the reaction kinetics, different gas-solid catalytic reaction systems can be simulated by using the coupled model.     

Effect of solid mass flux on anisotropic gas–solid flow in risers determined with an LES-SOM model

Within the framework of the two-fluid approach, gas was treated with a large-eddy simulation and a sub-grid-scale (SGS) turbulent kinetic energy model while particles were treated with a second-order-moment method to describe the anisotropy of the fluctuating velocity. A modified Simonin model was derived for the gas–solid interphase fluctuating energy transfer. The anisotropic gas–solid flow in a circulating fluidized bed was investigated. Predictions were in good agreement with experimental data. The distributions of the second-order moment of particles and SGS-turbulent kinetic energy of gas were simulated at different solid mass fluxes. The effects of the solid mass flux on the particle second-order moment, particle anisotropic behavior, gas SGS-turbulent kinetic energy and gas SGS energy dissipation were analyzed for the circulating fluidized bed.     

Modeling and scale analysis of gaseous fuel reactors in chemical looping combustion systems

This work investigates the scale-up of chemical looping combustion (CLC), a next-generation technology for carbon capture and storage, to the industrial scale. The study focused on the bottom bed of the unit, which was considered to be the critical region during scale-up due to the large solids inventory in this zone combined with relatively inefficient gas–solids contact. Two CLC reactors of vastly different sizes (bench and utility scale) were studied to discern their difference related to scale-up via a one-dimensional model. This model considered kinetics that varied with the degree of oxidation and population distribution of the oxygen carriers, the mixing of which accounts for both convective and dispersive transport. The model was validated against bench scale data, and was used to evaluate the performance of a 1000 MW_th CLC fuel reactor using either syngas or methane as fuels. Sensitivity analyses were also carried out with this model to determine the effects of several parameters on fuel conversion, including solids circulation, oxygen carrier reactivity, bed height, and maximum bubble size. The results show that the mass transfer of gas from bubbles to the emulsion phase represents a significant limiting factor for fuel conversion in the bottom bed of a utility scale fuel reactor.     

High photocatalytic efficiency of spouting reactor compared with fluidized bed with top irradiation source

The removal of volatile organic compounds by photocatalytic degradation is one of the safest and most effective ways of removing pollutants from the air. This process is highly affected by the type of reactor, light exposure, and hydrodynamics. For scale up purposes, continuous reactors with high capacity are required for treating large amounts of feedstock. In this work, two types of reactors based on different hydrodynamics, fluidized and spouted reactors, were designed to work under light irradiation inside the reactor. The efficiency of the reactors for volatile organic compound removal from high flow rates of air under Hg lamp irradiation using N–F-TiO₂ photocatalyst was investigated. The performance of the fluidized bed and spouted bed were evaluated and compared at the same weight hourly space velocity of feed stream through the reactor. The results revealed that 80% of the initial acetaldehyde was removed in the fluidized bed after about 200 min, while in the spouted bed the acetaldehyde was totally removed after about 120 min.     

Flow structures inside a large-scale turbulent fluidized bed of FCC particles:Eulerian simulation with an EMMS-based sub-grid scale model

Turbulent fluidized bed reactors are widely used in industry. However, CFD simulations of the hydrodynamic characteristics of these reactors are relatively sparse, despite the urgent demand from industry. To address this problem, Eulerian simulations with an EMMS-based sub-grid scale model, accounting for the effect of sub-grid scale structures on the inter-phase friction, are performed to study the hydrodynamics inside a large-scale turbulent fluidized bed of FCC particles. It is shown that the simulated a...     

Effects of magnetic fields on improving mass transfer in flue gas desulfurization using a fluidized bed

The effects of magnetic fields on improving the mass transfer in flue gas desulfurization using a fluidized bed are investigated in the paper. In this research, the magnetically fluidized bed (MFB) is used as the reactor in which ferromagnetic particles are fluidized with simulated flue gas under the influence of an external magnetic field. Lime slurry is continuously sprayed into the reactor. As a consequence, the desulfurization reaction and the slurry drying process take place simultaneously in the MFB. In this paper, the effects of ferromagnetic particles and external magnetic fields on the desulphurization efficiency are studied and compared with that of quartz particles as the fluidized particles. Experimental results show that the ferromagnetic particles not only act as a platform for lime slurry to precipitate on like quartz particles, but also take part in the desulfurization reaction. The results also show that the specific surface area of ferromagnetic particles after reaction is enlarged as the magnetic intensity increases, and the external magnetic field promotes the oxidation of S(IV), improving the mass transfer between sulphur and its sorbent. Hence, the efficiency of desulphurization under the effects of external magnetic fields is higher than that in general fluidized beds.     

Circulating turbulent fluidization—A new fluidization regime or just a transitional phenomenon

While circulating fluidized bed （CFB） reactor has many advantages over the more conventional turbulent fluidized bed （TFB） reactor, it does at least have one significant shortcoming-the rather dilute solids volume concentration in CFB reactor gives rise to less ideal reaction intensity. On the other hand, while having higher reaction intensity, TFB reactor has one fatal drawback of particle back-mixing, making it not suitable for certain reactions such as catalytic reaction where the catalyst requires frequent regeneration. This paper describes some key issues in the development of a circulating turbulent fluidized bed （CTFB） reactor that combines the advantages of both TFB and CFB, that is, to have the high reaction intensity as in TFB but and also to have a suppressed solids back-mixing as in CFB due to a continuous net upflow of solids flux through the bed. Experimental results show enough evidence to suggest that a new fluidization regime is formed, the characteristics of which appears to be distinct from those observed in a regular TFB and from those in either the bottom or the upper sections of regular CFB and/or high-density CFB （HDCFB）. Fundamentally, the difference is that particle-particle interaction （collision） dominates the motion of particles in CTFB and TFB, while gas-particle interaction （drag force） is the key element that determines the two phase flow in CFB including HDCFB.     

A two dimensional Euler–Lagrangian model of wood gasification in a charcoal bed—Part II: Parameter influence and comparison

A Euler–Lagrangian simulation was employed for a comprehensive parameter study of wood gasification in a fluidized charcoal bed. The parameters that were varied include the initial bed temperature, fuel mass flow rate, inert tar fraction, and kinetic energy losses caused by particle–particle and particle–wall collisions. The results of each parameter variation are compared with a base scenario, previously described in detail in Part I of this study (Gerber & Oevermann, 2014). The results are interpreted by comparing the reactor outlet temperature, averaged particle temperature, overall wood mass, overall charcoal mass, concentrations of several gaseous species, and axial barycenter data for particles obtained with different sets of parameters. The inert tar fraction and fuel mass flow rate are the most sensitive parameter, while the particle–particle and particle–wall contact parameters have only a small impact on the results. Increasing the reactive tar components by 19% almost doubled the amount of reactive tars at the reactor outlet, while decreasing the restitution coefficients of the particle collisions by 0.2 results in higher overall gas production but almost no change in bed height. Herein, our numerical results are discussed in detail while assessing the model restrictions.     

粗糙颗粒动理学及稠密气固两相流动的数值模拟

考虑颗粒碰撞过程中摩擦作用,给出了粗糙颗粒碰撞动力学.引入颗粒相拟总温来表征颗粒平动和转动脉动能量的特征.基于气体分子运动论,建立颗粒碰撞中平动和旋转共同作用的粗糙颗粒动理学,给出了颗粒相压力和黏度等输运参数计算模型.运用基于颗粒动理学的欧拉-欧拉气固两相流模型,数值模拟了流化床内气体颗粒两相流动特性,分析了颗粒旋转流动对颗粒碰撞能量交换和耗散的影响.模拟得到的流化床内径向颗粒浓度和提升管内颗粒轴向速度与他人实验结果相吻合.模拟结果表明随着颗粒浓度的增加,颗粒相压力和能量耗散逐渐增加,而颗粒拟总温先增加后下降.随着颗粒粗糙度系数的增加,床内平均颗粒相拟总温和能量耗散增加,表明颗粒旋转产生的摩擦将导致颗粒旋转脉动能量的改变,影响床内气体-颗粒两相宏观流动特性.      

A review of recent advances in selective catalytic NOx reduction reactor technologies

Research on NOx treatment is extensive in recent years due to growing environmental awareness. Selec- tive catalytic reduction （SCR） of NOx, as a proven technology, offers higher NOx control efficiency than many other NOx treatment methods. The present work reviews the recent development of SCR reactor technologies. Firstly, catalysts and mechanism of different SCRs were briefly summarized. Different SCR reactors, e.g. structured reactor, fluidized bed reactor and moving bed reactor, were then discussed. As a more advanced technology, multifunctional reactors were also developed for SCR process and could be divided into two categories： decoupled adsorption-reaction process and combined SCR system. The mechanism and properties of these processes were discussed in detail. Some recommendations were given for the future work in SCR reactor design. SCR reactor technology for emerging energy processes was also addressed, such as oxyfuel combustion and biofuel conversion processes, which put forward new requirements for SCR technologies and also open new opportunities for advanced design of SCR reactors.     

Investigations in the field of fluidization,carried out at London University College

The main trend in investigations carried out at London University College is an elucidation of the mechanism of the operation of chemical reactors with a fluidized bed. The work involved in these investigations consisted of a detailed study of the corresponding physical processes to permit the development of an adequate model of a reactor. Verification of the model by a study of the chemical reactions taking place in a reactor with a fluidized bed is one of the most important stages of the work. The investigations were limited to the case of fluidization by gases. The nature of isolated unperturbed bubbles has been rather thoroughly studied, which makes it possible to construct a simple model [1, 2] which with subsequent refinenment, can become considerably more complicated. The necesary information with respect to two essential elements of this model is lacking. In the first place, heat transfer between the gas in a cloud, surrounded by bubbles, and the gas in the adjacent parts of the fluidized bed has been little studied. In the second place, for actual cases there is no acceptable method for calculating the mean size of the bubbles, their particle-size distribution, the change in their dimensions with height, as a function of the determining parameters such as the velocity of the gas, the particle size, and the construction of the gas-distributing device. Over the course of the last five years, a group of associates^* carried out investigations aimed at obtaining this information, as well as at testing models, and at analyzing of the process of stratification of the solid phase. A review of the latest results is given below.London. Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 6, pp. 50–60, November–December, 1972.     

Simulation of mass balance behavior in a large-scale circulating fluidized bed reactor

We determine using a compound model the influence of the mass of granular matter on the behavior of a supercritical circulating fluidized bed (CFB) reactor. Population balance enables a stationary-regime modeling of the mass flow of granular matter inside a CFB unit in a large-scale. The simulation includes some important dynamic processes of gas-particle flows in fluidized bed such as attrition, fragmentation, elutriation, and fuel combustion. Numerical calculations with full boiler loading were performed of operational parameters such as furnace temperature, furnace pressure, feeding materials mass flows, and excess air ratio. Furthermore, three bed inventory masses were adopted as experimental variables in the simulation model of mass balance. This approach enables a sensitivity study of mass flows of granular matter inside a CFB facility. Some computational results from this population balance model obtained for a supercritical CFB reactor are presented that show consistency with the operational data for large-scale CFB units.