A hybrid immersed‐boundary and multi‐block lattice Boltzmann method for simulating fluid and moving‐boundaries interactions

A numerical method is developed for modelling the interactions between incompressible viscous fluid and moving boundaries. The principle of this method is introducing the immersed‐boundary concept in the framework of the lattice Boltzmann method, and improving the accuracy and efficiency of the simulation by refining the mesh near moving boundaries. Besides elastic boundary with a constitutive law, the method can also efficiently simulate solid moving‐boundary interacting with fluid by employing the direct forcing technique. The method is validated by the simulations of flow past a circular cylinder, two cylinders moving with respect to each other and flow around a hovering wing. The versatility of the method is demonstrated by the numerical studies including elastic filament flapping in the wake of a cylinder and fish‐like bodies swimming in quiescent fluid. Copyright © 2006 John Wiley & Sons, Ltd.     

An improved immersed boundary‐lattice Boltzmann method based on force correction technique

In this paper, an improved immersed boundary‐lattice Boltzmann method based on the force correction technique is presented for fluid‐structure interaction problems including the moving boundary interfaces. By introducing a force correction coefficient, the non‐slip boundary conditions are much better enforced compared with the conventional immersed boundary‐lattice Boltzmann methods. In addition, the implicit and iterative calculations are avoided; thus, the computational cost is reduced dramatically. Several numerical experiments are carried out to test the efficiency of the method. It is found that the method has the second‐order accuracy, and the non‐slip boundary conditions are enforced indeed. The numerical results also show that the present method is a suitable tool for fluid‐structure interaction problems involving complex moving boundaries.     

A new modification of the immersed‐boundary method for simulating flows with complex moving boundaries

In this paper, a new immersed‐boundary method for simulating flows over complex immersed, moving boundaries is presented. The flow is computed on a fixed Cartesian mesh and the solid boundaries are allowed to move freely through the mesh. The present method is based on a finite‐difference approach on a staggered mesh together with a fractional‐step method. It must be noted that the immersed boundary is generally not coincident with the position of the solution variables on the grid, therefore, an appropriate strategy is needed to construct a relationship between the curved boundary and the grid points nearby. Furthermore, a momentum forcing is added on the body boundaries and also inside the body to satisfy the no‐slip boundary condition. The immersed boundary is represented by a series of interfacial markers, and the markers are also used as Lagrangian forcing points. A linear interpolation is then used to scale the Lagrangian forcing from the interfacial markers to the corresponding grid points nearby. This treatment of the immersed‐boundary is used to simulate several problems, which have been validated with previous experimental results in the open literature, verifying the accuracy of the present method. Copyright © 2006 John Wiley & Sons, Ltd.     

Simulation of dynamic fluid–solid interactions with an improved direct-forcing immersed boundary method

Dynamic fluid–solid interactions are widely found in chemical engineering, such as in particle-laden flows, which usually contain complex moving boundaries. The immersed boundary method (IBM) is a convenient approach to handle fluid–solid interactions with complex geometries. In this work, Uhlmann's direct-forcing IBM is improved and implemented on a supercomputer with CPU–GPU hybrid architecture. The direct-forcing IBM is modified as follows: the Poisson's equation for pressure is solved before evaluation of the body force, and the force is only distributed to the Cartesian grids inside the immersed boundary. A multidirect forcing scheme is used to evaluate the body force. These modifications result in a divergence-free flow field in the fluid domain and the no-slip boundary condition at the immersed boundary simultaneously. This method is implemented in an explicit finite-difference fractional-step scheme, and validated by 2D simulations of lid-driven cavity flow, Couette flow between two concentric cylinders and flow over a circular cylinder. Finally, the method is used to simulate the sedimentation of two circular particles in a channel. The results agree very well with previous experimental and numerical data, and are more accurate than the conventional direct-forcing method, especially in the vicinity of a moving boundary.     

An immersed smoothed point interpolation method (IS‐PIM) for fluid‐structure interaction problems

An immersed smoothed point interpolation method using 3‐node triangular background cells is proposed to solve 2D fluid‐structure interaction problems for solids with large deformation/displacement placed in incompressible viscous fluid. In the framework of immersed‐type method, the governing equations can be decomposed into 3 parts on the basis of the fictitious fluid assumption. The incompressible Navier‐Stokes equations are solved using the semi‐implicit characteristic‐based split scheme, and solids are simulated using the newly developed edge‐based smoothed point interpolation method. The fictitious fluid domain can be used to calculate the coupling force. The numerical results show that immersed smoothed point interpolation method can avoid remeshing for moving solid based on immersed operation and simulate the contact phenomenon without an additional treatment between the solid and the fluid boundary. The influence from information transfer between solid domain and fluid domain on fluid‐structure interaction problems has been investigated. The numerical results show that the proposed interpolation schemes will generally improve the accuracy for simulating both fluid flows and solid structures.     

不可压粘性流体浸入边界直接力法及软件实现

浸入边界法通过在N-S方程中施加体积力模拟不可滑移固壁边界及动边界，避免生成复杂贴体网格及动网格，极大地节省了网格建模时间及动网格计算消耗。本文提出一种新型附加体积力简化计算方法，将简化附加体积力以源项形式嵌入动量方程迭代中，通过用户自定义函数对CFD软件FLUENT二次开发，实现了浸入边界法和通用流体力学求解器的耦合计算。通过静止圆柱和动圆柱绕流数值模拟进行了验证，并探讨了插值函数对计算精度的影响。研究表明，通过引入浸入边界模型，能够提高计算效率，并实现结构网格背景下复杂边界和动边界的高效建模。     

Mesh adaptation for simulation of unsteady flow with moving immersed boundaries

In this work, an approach for performing mesh adaptation in the numerical simulation of two‐dimensional unsteady flow with moving immersed boundaries is presented. In each adaptation period, the mesh is refined in the regions where the solution evolves or the moving bodies pass and is unrefined in the regions where the phenomena or the bodies deviate. The flow field and the fluid–solid interface are recomputed on the adapted mesh. The adaptation indicator is defined according to the magnitude of the vorticity in the flow field. There is no lag between the adapted mesh and the computed solution, and the adaptation frequency can be controlled to reduce the errors due to the solution transferring between the old mesh and the new one. The preservation of conservation property is mandatory in long‐time scale simulations, so a P1‐conservative interpolation is used in the solution transferring. A nonboundary‐conforming method is employed to solve the flow equations. Therefore, the moving‐boundary flows can be simulated on a fixed mesh, and there is no need to update the mesh at each time step to follow the motion or the deformation of the solid boundary. To validate the present mesh adaptation method, we have simulated several unsteady flows over a circular cylinder stationary or with forced oscillation, a single self‐propelled swimming fish, and two fish swimming in the same or different directions. Copyright © 2012 John Wiley & Sons, Ltd.     

Simulating 3D deformable particle suspensions using lattice Boltzmann method with discrete external boundary force

A method for direct numerical analysis of three‐dimensional deformable particles suspended in fluid is presented. The flow is computed on a fixed regular ‘lattice’ using the lattice Boltzmann method (LBM), where each solid particle is mapped onto a Lagrangian frame moving continuously through the domain. Instead of the bounce‐back method, an external boundary force (EBF) is used to impose the no‐slip boundary condition at the fluid–solid interface for stationary or moving boundaries. The EBF is added directly to the lattice Boltzmann equation. The motion and orientation of the particles are obtained from Newtonian dynamics equations. The advantage of this approach is outlined in comparison with the standard and higher‐order interpolated bounce‐back methods as well as the LBM immersed‐boundary and the volume‐of‐fluid methods. Although the EBF method is general, in this application, it is used in conjunction with the lattice–spring model for deformable particles. The methodology is validated by comparing with experimental and theoretical results. Copyright © 2009 John Wiley & Sons, Ltd.     

Numerical simulations of fluid–structure interaction based on Cartesian grids with two boundary velocities

This work proposes an innovative numerical method for simulating the interaction of fluid with irregularly shaped stationary structures based on Cartesian grids. Instead of prescribing an artificial force to enforce the no‐slip boundary condition at the solid–fluid interface, this work imposes two boundary velocities, referred to as the solid and mass‐conserving boundary velocities, to satisfy the no‐slip boundary condition and mass conservation in the ghost cells around the immersed solid boundary. Both the traditional level set method [41] and the hybrid particle level set method [45] were used to represent the solid boundary and the complex free‐surface evolution, respectively. Consequently, the boundary velocities close to the immersed solid boundary can be determined in terms of the level set function and the neighboring fluid velocity. The projection method is further modified to incorporate the solid and mass‐conserving boundary velocities into the solution algorithm. A series of numerical experiments were conducted to demonstrate the feasibility of the proposed method. They involved uniform flow past a stationary circular cylinder and the propagation of water waves over a submerged trapezoidal breakwater. Comparisons between the numerical results and experimental data showed very good agreement in all cases of interest. Copyright © 2015 John Wiley & Sons, Ltd.     

Towards simulation of flapping wings using immersed boundary method

In this work the immersed boundary method is applied to simulate incompressible turbulent flows around stationary and moving objects. The goal is to demonstrate that the immersed boundary technique along with a large eddy simulation approach is capable of simulating the effect of the so‐called leading edge vortex (LEV), which can be found in flapping wing aerodynamics. A Lagrangian method is used to approximate the solutions in the freshly cleared cells that lay within solid objects at one time step and emerge into fluid domain at the next time step. Flow around a stationary cylinder at Re_D = 20, 40, and 3900 (based on cylinder diameter D) is first studied to validate the immersed boundary solver based on the finite volume scheme using a staggered grid. Then, a harmonically oscillating cylinder at Re_D = 10 000 is considered to test the solver after the Lagrangian method is implemented to interpolate the solution in the freshly cleared cells. Finally, this approach is used to study flows around a stationary flat‐plate at several angles of attack and fast pitching flat‐plate. The rapidly pitching plate creates a dynamic LEV that can be used to improve the efficiency of flapping wings of micro air vehicle and to determine the optimum flapping frequency. Copyright © 2012 John Wiley & Sons, Ltd.     

一种强耦合预估-校正浸入边界法

为克服传统浸入边界法的质量不守恒缺陷,提出了一种用于可压缩流固耦合问题的强耦合预估-校正浸入边界法。通过阐述一般流固耦合系统的矩阵表示,推导了流固耦合系统的强耦合Gauss-Seidel迭代格式,进一步导出预估-校正格式,提出了预估-校正浸入边界法。该方法使用无耦合边界模型对流体进行预估,将流固耦合边界视为自由面,固体原本占据的空间初始化为零质量的单元,允许流体自由穿过耦合边界。对于流体的计算,使用带有minmod限制器的二阶MUSCL有限体积格式和基于Zha-Bilgen分裂的AUSM+-up方法,配合三阶Runge-Kutta格式推进时间步。在校正步骤中,通过一组质量守恒的输运规则来实现输运过程。输运算法可概括为将边界内侧的流体进行标记,根据标记顺序以均匀方式分割和移动流体,产生一个指向边界外侧的流动,最后在边界附近施加速度校正保证无滑移条件。标记和输运算法避免了繁琐的对截断单元的几何处理,确保了算法易于实现。对于固体的计算,分别采用一阶差分格式和隐式动力学有限元格式求解刚体和线弹性体,并利用高斯积分获得固体表面的耦合力。使用预估-校正浸入边界法计算了一维问题和二维问题。在一维活塞问题中,获得了压力分布、相对质量历史和误差曲线,并与其他方法进行了对比。在二维的激波冲击平板问题中,获得了数值模拟纹影和平板结构的挠度历史,并与实验结果进行了对比。研究表明,该方法区别于传统的虚拟网格方法和截断单元方法,能够精确地维持流场的质量守恒并易于实现,且具有一阶收敛精度,能够较准确地预测激波绕射后的流场以及平板在激波作用下的挠度,为开发流固耦合算法提供了一种新的思路。     

A hybrid immersed boundary and material point method for simulating 3D fluid–structure interaction problems

A numerical method is developed for solving the 3D, unsteady, incompressible Navier–Stokes equations in curvilinear coordinates containing immersed boundaries (IBs) of arbitrary geometrical complexity moving and deforming under forces acting on the body. Since simulations of flow in complex geometries with deformable surfaces require special treatment, the present approach combines a hybrid immersed boundary method (HIBM) for handling complex moving boundaries and a material point method (MPM) for resolving structural stresses and movement. This combined HIBM & MPM approach is presented as an effective approach for solving fluid–structure interaction (FSI) problems. In the HIBM, a curvilinear grid is defined and the variable values at grid points adjacent to a boundary are forced or interpolated to satisfy the boundary conditions. The MPM is used for solving the equations of solid structure and communicates with the fluid through appropriate interface‐boundary conditions. The governing flow equations are discretized on a non‐staggered grid layout using second‐order accurate finite‐difference formulas. The discrete equations are integrated in time via a second‐order accurate dual time stepping, artificial compressibility scheme. Unstructured, triangular meshes are employed to discretize the complex surface of the IBs. The nodes of the surface mesh constitute a set of Lagrangian control points used for tracking the motion of the flexible body. The equations of the solid body are integrated in time via the MPM. At every instant in time, the influence of the body on the flow is accounted for by applying boundary conditions at stationary curvilinear grid nodes located in the exterior but in the immediate vicinity of the body by reconstructing the solution along the local normal to the body surface. The influence of the fluid on the body is defined through pressure and shear stresses acting on the surface of the body. The HIBM & MPM approach is validated for FSI problems by solving for a falling rigid and flexible sphere in a fluid‐filled channel. The behavior of a capsule in a shear flow was also examined. Agreement with the published results is excellent. Copyright © 2007 John Wiley & Sons, Ltd.     

A divergence‐free interpolation scheme for the immersed boundary method

The immersed boundary approach for the modeling of complex geometries in incompressible flows is examined critically from the perspective of satisfying boundary conditions and mass conservation. It is shown that the system of discretized equations for mass and momentum can be inconsistent, if the velocity is used in defining the force density to satisfy the boundary conditions. As a result, the velocity is generally not divergence free and the pressure at locations in the vicinity of the immersed boundary is not physical. However, the use of the pseudo‐velocities in defining the force density, as frequently done when the governing equations are solved using a fractional step or projection method, combined with the use of the specified velocity on the immersed boundary, is shown to result in a consistent set of equations which allows a divergence‐free velocity but, depending on the time step, is shown to have the undesirable effects of inaccurately satisfying the boundary conditions and allowing a significant permeability of the immersed boundary. If the time step is reduced sufficiently, the boundary conditions on the immersed boundary can be satisfied. However, this entails an unacceptable increase in computational expense. Two new methods that satisfy the boundary conditions and allow a divergence‐free velocity while avoiding the increased computational expense are presented and shown to be second‐order accurate in space. The first new method is based on local time step reduction. This method is suitable for problems where the immersed boundary does not move. For these problems, the first new method is shown to be closely related to the second new method. The second new method uses an optimization scheme to minimize the deviation from the interpolation stencil used to represent the immersed boundary while ensuring a divergence‐free velocity. This method performs well for all problems, including those where the immersed boundary moves relative to the grid. Additional results include showing that the force density that is added to satisfy the boundary conditions at the immersed boundary is unbounded as the time step is reduced and that the pressure in the vicinity of the immersed boundary is unphysical, being strongly a function of the time step. A method of computing the total force on an immersed boundary which takes into account the specifics of the numerical solver used in the iterative process and correctly computes the total force irrespective of the residual level is also presented. Copyright © 2007 John Wiley & Sons, Ltd.     

Flow simulation on moving boundary‐fitted grids and application to fluid–structure interaction problems

We present a method for the parallel numerical simulation of transient three‐dimensional fluid–structure interaction problems. Here, we consider the interaction of incompressible flow in the fluid domain and linear elastic deformation in the solid domain. The coupled problem is tackled by an approach based on the classical alternating Schwarz method with non‐overlapping subdomains, the subproblems are solved alternatingly and the coupling conditions are realized via the exchange of boundary conditions. The elasticity problem is solved by a standard linear finite element method. A main issue is that the flow solver has to be able to handle time‐dependent domains. To this end, we present a technique to solve the incompressible Navier–Stokes equation in three‐dimensional domains with moving boundaries. This numerical method is a generalization of a finite volume discretization using curvilinear coordinates to time‐dependent coordinate transformations. It corresponds to a discretization of the arbitrary Lagrangian–Eulerian formulation of the Navier–Stokes equations. Here the grid velocity is treated in such a way that the so‐called Geometric Conservation Law is implicitly satisfied. Altogether, our approach results in a scheme which is an extension of the well‐known MAC‐method to a staggered mesh in moving boundary‐fitted coordinates which uses grid‐dependent velocity components as the primary variables. To validate our method, we present some numerical results which show that second‐order convergence in space is obtained on moving grids. Finally, we give the results of a fully coupled fluid–structure interaction problem. It turns out that already a simple explicit coupling with one iteration of the Schwarz method, i.e. one solution of the fluid problem and one solution of the elasticity problem per time step, yields a convergent, simple, yet efficient overall method for fluid–structure interaction problems. Copyright © 2005 John Wiley & Sons, Ltd.     

A comparative study of lattice Boltzmann methods using bounce‐back schemes and immersed boundary ones for flow acoustic problems

In order to find applicable treatments of moving boundary conditions based on the lattice Boltzmann method in flow acoustic problems, three bounce‐back (BB) methods and four kinds of immersed boundary (IB) methods are compared. We focused on fluid–solid boundary conditions for flow acoustic problems especially the simulations of sound waves from moving boundaries. BB methods include link bounce‐back, interpolation bounce‐back and unified interpolation bounce‐back methods. Five IB methods are explicit and implicit direct‐forcing (Explicit‐IB and Implicit‐IB), two kinds of partially saturated computational methods and ghost fluid method. In order to reduce the spurious pressure generated by the fresh grid node changing from solid domain to fluid domain for BB methods and sharp IB methods, we proposed two new kinds of treatments and compared them with two existing ones. Simulations of the benchmark problems prove that the local evolutionary iteration (LI) is the best one in treatments of the fresh nodes. In addition, for standing boundary problems, although BB methods have a little higher accuracy, all the methods have similar accuracy. However, for moving boundary problems, IB methods are more appropriate than BB methods, because IB methods' smooth interpolation of pressure eld produces less disturbing spurious pressure waves. With improved treatments of fresh nodes, BB methods are also acceptable for moving boundary acoustic problems. In comparative tests in respective type, unified interpolation bounce‐back with LI, Implicit‐IB, and ghost fluid with LI are the best choices. Copyright © 2013 John Wiley & Sons, Ltd.     

A level set approach for computing solutions to inviscid compressible flow with moving solid boundary using fixed Cartesian grids

A level set approach for computing solutions to inviscid compressible flow with moving solid surface is presented. The solid surface is considered to be sharp and is described as the zero level set of a smooth explicit function of space and time. The finite volume TVD–MacCormack's two‐step procedure is used. The boundary conditions on the solid surface are easily implemented by defining the smooth level set function. The present treatment of the level set method allows the handling of fluid flows in the presence of irregularly shaped solid boundaries, escaping from the bookkeeping complexity in the so‐called ‘surface‐tracking’ method. Using the proposed numerical techniques, a two‐dimensional numerical simulation is made to investigate the aerodynamic phenomena induced by two high‐speed trains passing by each other in a tunnel. Copyright © 2001 John Wiley & Sons, Ltd.     

基于隐式扩散的直接力格式浸没边界格子Boltzmann方法

采用浸没边界格子Boltzmann(immersed boundary-lattice Boltzmann,IB-LB)模型执行动边界绕流数值模拟时,信息交互界面和边界力计算格式直接影响流动求解器的数值精度和计算效率.基于隐式扩散界面,一种改进的直接力格式IB-LB模型被提出.边界力表达式基于欧拉/拉格朗日变量同一性准...     

基于反馈力浸入边界法模拟复杂动边界流动

浸入边界法是模拟流固耦合的重要数值方法之一。本文采用反馈力浸入边界方法,对旋转圆柱和水轮机活动导叶旋转摆动绕流后的动边界流场进行数值模拟。其中,固体边界采用一系列离散的点近似代替,流体为不可压缩牛顿流体,使用笛卡尔自适应加密网格,利用有限差分法进行求解。固体对流场的作用通过构造适宜的反馈力函数实现。本文首先通过旋转圆柱绕流的计算结果同实验结果进行对比,吻合较好,验证了该计算方法的可靠性。然后针对水电站水力过渡过程中水轮机活动导叶旋转摆动绕流后的动边界流场进行数值模拟,得到导叶动态绕流后的流场分布特性和涡结构的演化特性。     

Dynamic parallel Galerkin domain decomposition procedures with grid modification for parabolic equation

Dynamic parallel Galerkin domain decomposition procedures with grid modification for semi‐linear parabolic equation are given. These procedures allow one to apply different domain decompositions, different grids, and interpolation polynomials on the sub‐domains at different time levels when necessary, in order to capture time‐changing localized phenomena, such as, propagating fronts or moving layers. They rely on an implicit Galerkin method in the sub‐domains and simple explicit flux calculation on the inter‐domain boundaries by integral mean method to predict the inner‐boundary conditions. Thus, the parallelism can be achieved by these procedures. These procedures are conservative both in the sub‐domains and across inter‐boundaries. The explicit nature of the flux prediction induces a time step limitation that is necessary to preserve stability, but this constraint is less severe than that for a fully explicit method. Stability and convergence analysis in L²‐norm are derived for these procedures. The experimental results are presented to confirm the theoretical results. Copyright © 2010 John Wiley & Sons, Ltd.