首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到17条相似文献,搜索用时 109 毫秒
1.
双臂空间机器人系统末端惯性空间轨迹的反馈跟踪控制   总被引:1,自引:0,他引:1  
葛景华  陈力 《力学季刊》2007,28(3):455-460
本文讨论了载体位置不受控制的双臂空间机器人系统的载体姿态与机械臂末端抓手协调运动的控制问题.结合系统的动量守恒关系对双臂空间机器人系统的运动学、动力学作了分析,推导出了系统的载体姿态与机械臂末端抓手协调运动的增广广义Jacobi关系.并以此为基础,给出在载体位置不受控制的情况下,惯性坐标系内双臂空间机器人系统的载体姿态与机械臂末端抓手协调运动的反馈跟踪控制规律.研究结果表明,在系统动力学模型及参数较精确确定的情况下,本文提出的控制方案能够有效地控制双臂空间机器人机械臂的末端抓手与载体姿态准确地完成指定的运动,而不需对其载体的位置进行主动控制.仿真计算结果证实了方法的有效性.  相似文献   

2.
本文讨论了载体姿态受控、位置不受控制的双臂空间机器人系统的控制问题.利用拉格朗日方法并结合系统动量守恒关系,建立了双臂空间机器人系统的非线性系统动力学模型.以此为基础,考虑到空间机器人系统结构的复杂性及其某些参数的变动性,根据具有较强鲁棒性的变结构控制理论,设计了双臂空间机器人载体姿态与两机械臂末端抓手惯性空间轨迹协调运动的滑模变结构控制方案.为了克服滑模变结构控制器抖振的缺点,附加设计了一个模糊控制器,以便根据系统的输出来动态调节滑模变结构控制器等速趋近率的系数,从而既确保了系统的快速响应而又消除了原有的抖振.系统数值仿真,证明了上述控制方案良好的控制效果.  相似文献   

3.
讨论了载体位置、姿态均不受控制情况下,具有外部扰动与参数不确定的自由漂浮空间机械臂系统关节空间轨迹跟踪的控制问题.结合系统动量、动量矩守恒关系及拉格朗日方法,建立了自由漂浮空间机械臂的系统动力学方程.针对外部扰动与参数不确定的情况,提出一种自适应反演滑模控制方案.此控制方案无需要求系统动力学方程关于惯性参数呈线性函数关系;同时,它可保证系统具有全局意义下的渐近稳定性.数值仿真结果证实了该控制方案可有效地消除外部扰动与参数不确定对系统的影响,控制空间机械臂系统各关节按关节空间内的期望轨迹进行运动.  相似文献   

4.
以双向逼近方法为基础,讨论了载体姿态与位置均不受控制的带滑移铰空间机器臂的运动规划问题.该方法利用系统的非完整动力学性质,仅通过对空间机器臂关节铰运动的控制,即可达到对载体姿态及机械臂关节位置的双重控制效果,从而减少了载体姿态控制燃料的消耗,有效延长了空间机械臂系统的使用寿命.系统数值仿真证明了该方法的有效性.  相似文献   

5.
陈力 《固体力学学报》2003,24(3):327-333
研究载体位置不受控制的空间机械臂载体与末端抓手协调运动的控制问题,结合系统动量守恒关系,建立了均与适当选择的惯性参数呈线性关系的系统动力学方程及协调运动的广义Jacobj矩阵,基于上述结果,针对系统中惯性参数不确定的情况,设计了载体姿态与机械臂末端抓手惯性空间轨迹协调运动的鲁棒与自适应混合控制方案,提出的控制方案具有不需要测量、反馈载体的位置、移动速度、移动加速度的优点,并由于对不确定参数采用保持鲁棒性的方式,减少了计算量,仿真运算证实了提出的控制方法的有效性。  相似文献   

6.
讨论了基座存在弹性情况下,载体位置无控、姿态受控的漂浮基空间机械臂惯性空间轨迹跟踪控制及基座弹性振动主动抑制问题.由系统位置几何关系及动量守恒关系,建立了系统运动Jacobi关系;之后利用拉格朗日方法并结合系统动量守恒关系建立了系统动力学方程.基于奇异摄动理论的两种时间尺度假设,将该方程分解为描写系统刚性运动的慢变子系统与描写系统弹性振动的快变子系统.对慢变子系统设计了基于计算力矩法的轨迹跟踪控制器;对于快变子系统则设计了线性二次最优控制方案.数值仿真证实了提出的控制方法的有效性.  相似文献   

7.
针对空间机械臂在执行在轨部件替换、在轨燃料加注以及空间站站内任务时所涉及的插拔孔操作控制问题,提出了一种空间机械臂在轨插拔孔操作的超扭曲滑模阻抗控制策略。首先,结合空间机械臂末端部件插头输出插拔孔主动力与孔内摩擦阻力作用关系,利用第二类拉格朗日方程,建立了载体位置、姿态均不受控下,漂浮基空间机械臂在轨插拔孔操作过程系统动力学方程。其次,由空间机械臂末端部件插头位姿及其输出插拔孔主动力之间的动态关系以及阻抗控制原理,建立了阻抗控制模型。最后,针对系统同时存在动力学不确定与外部扰动,将超扭曲算法与滑模控制结合,从而设计了超扭曲滑模阻抗控制策略;并通过李雅普诺夫理论,证明了控制系统的稳定性。该控制策略将滑模控制中的高频切换部分隐藏至滑模变量的高阶导数中,有效抑制普通滑模算法产生的抖振,同时补偿系统的不确定与外部扰动。数值仿真结果表明,部件插头位置精度均优于1?mm,姿态精度均优于0.5?°,输出力精度均优于1.5?N,验证了所提出控制策略的有效性。  相似文献   

8.
讨论了基座存在弹性情况下,载体位置无控、姿态受控的漂浮基空间机械臂惯性空间轨迹跟踪控制及基座弹性振动主动抑制问题。由系统位置几何关系及动量守恒关系,建立了系统运动Jacobi 关系;之后利用拉格朗日方法并结合系统动量守恒关系建立了系统动力学方程。基于奇异摄动理论的两种时间尺度假设,将该方程分解为描写系统刚性运动的慢变子系统与描写系统弹性振动的快变子系统。对慢变子系统设计了基于计算力矩法的轨迹跟踪控制器;对于快变子系统则设计了线性二次最优控制方案。数值仿真证实了提出的控制方法的有效性。  相似文献   

9.
基于双向映射神经元网络,讨论了载体位置、姿态均不受控制情况下,漂浮基空间机械臂的运动学控制问题.为此,根据系统几何关系,结合系统动量守恒、动量矩守恒关系.分析、建立了空间机械臂的广义运动雅可比关系.以此为基础,利用双向映射神经元网络及李雅普诺夫直接方法,设计了一种收敛的空间机械臂逆运动学控制方法,以控制空间机械臂的末端位姿朝着惯性空间的期望位姿点运动.提出的控制方法的突出优点在于:既不需要确切知道空间机械臂运动雅可比矩阵的具体结构,也不需要了解系统动力学参数的相关信息.一个作平面运动的自由漂浮两杆空间机械臂系统的数值仿真,证实了方法的有效性.  相似文献   

10.
讨论了载体位置、姿态均不受控制的闭环双臂空间机器人系统的非完整运动规划问题. 以系统动量、动量矩守恒关系及几何约束条件为基础,建立了控制设计所需的系统状态方程; 并通过对状态方程应用双向Lyapunov方法,获得了机械臂关节角的控制输入方程,从而达到 对载体姿态及机械臂关节角的双重控制效果. 该方法的优点是减少了载体姿态控制燃料的消 耗,有效地延长了空间机器人系统的使用寿命. 通过一个平面自由漂浮闭环双臂空间机器人系统 的数值仿真,证明了方法的有效性.  相似文献   

11.
陈力  刘延柱等 《力学季刊》2001,22(2):198-203
本文讨论了具有不确定系统参数的漂浮基空间机械臂系统的控制问题,由于截体的位置与姿态均不变控制,空间机械臂系统的控制方程失去了关于系统惯性参数的线性性质,给控制系统设计带来极大的困难,基于增广变量的思想,我们克服了上述难点,保持了控制方程关于系统惯性参数的线性关系;在此基础上,针对系统中机械臂参数不确定,载荷参数未知的情况,提出了关节空间轨迹追踪的鲁棒自适应控制方案,并应用Lyapunov直接方法对上述控制方案的渐近稳定性条件作了证明,提出的控制方案适用于空间站舱内机械手控制系统设计,仿真运算证实了该方法的有效性。  相似文献   

12.
The control problem of coordinated motion of a free-floating space rigid manipulator with external disturbance is discussed. By combining linear momentum conversion and the Lagrangian approach, the full-control dynamic equation and the Jacobian relation of a free-floating space rigid manipulator are established and then inverted to the state equation for control design. Based on the terminal sliding mode control (SMC) technique, a mathematical expression of the terminal sliding surface is proposed. The terminal SMC scheme is then developed for coordinated motion between the base's attitude and the end-effector of the free-floating space manipulator with external disturbance. This proposed control scheme not only guarantees the existence of the sliding phase of the closed-loop system, but also ensures that the output tracking error converges to zero in finite time. In addition, because the initial system state is always at the terminal sliding surface, the control scheme can eliminate reaching phase of the SMC and guarantee global robustness and stability of the closed-loop system. A planar free-floating space rigid manipulator is simulated to verify the feasibility of the proposed control scheme.  相似文献   

13.
The control of a free-floating space manipulator system is discussed. With the augmentation approach, the nonlinear parameterization problem of the dynamic equations of the space manipulator system is overcome. Based on the results, the robust control scheme for free-floating space manipulator with uncertain payload parameters to track the desired trajectory in jointspace is proposed, and the global convergence of the tracking is verified by using the Lyapunov method. The proposed control scheme is computationally simple, because we choose to make the controller robust to the uncertain inertial parameters rather than explicitly estimate them online. In particular, it needn't control the position and attitude of the floating base. A two-link planar space manipulator system is simulated to verify the control scheme proposed. Project supported by the National Natural Science Foundation of China (No. 19872032), Aeronautical Science Foundation, and Science Foundation of Fuzhou University.  相似文献   

14.
Nonlinear control of electrical flexible-joint robots   总被引:1,自引:0,他引:1  
This paper is devoted to the nonlinear tracking control of electrically driven flexible-joint manipulators using the voltage control strategy. Despite the torque control laws that are involved in the complexity of manipulator dynamics, the proposed control law is free from manipulator dynamics. This novelty is for adopting the voltage control strategy to derive a simple robust adaptive control under both structured and unstructured uncertainty. The proposed control approach has a fast response with a good tracking performance under the well-behaved control efforts in the form of decentralized control. The control method is justified by the stability analysis and simulated on a flexible-joint electrically driven robot manipulator.  相似文献   

15.
The impact dynamics, impact effect, and post-impact unstable motion sup- pression of free-floating space manipulator capturing a satellite on orbit are analyzed. Firstly, the dynamics equation of free-floating space manipulator is derived using the sec- ond Lagrangian equation. Combining the momentum conservation principle, the impact dynamics and effect between the space manipulator end-effector and satellite of the cap- ture process are analyzed with the momentum impulse method. Focusing on the unstable motion of space manipulator due to the above impact effect, a robust adaptive compound control algorithm is designed to suppress the above unstable motion. There is no need to control the free-floating base position to save the jet fuel. Finally, the simulation is proposed to show the impact effect and verify the validity of the control algorithm.  相似文献   

16.
漂浮基空间机械臂关节轨迹跟踪的增广鲁棒控制方法   总被引:5,自引:1,他引:4  
讨论了载体位置与姿态均不受控制的漂浮基空间机械臂系统的控制问题。基于增广变量法,解决了空间机械臂系统的控制方程关于系统惯性参数的非线性化问题;保持了控制方程关于系统惯性参数的线性关系。在此基础上,针对系统载荷参数不确定的情况下,提出了关节空间轨迹追踪 的增广鲁棒控制方法,并应用Lyapunov直接方法证明了 提到的控制方案能使系统满足渐近稳定性条件。通过仿真运算,证实了方法的有效性。  相似文献   

17.
In this paper, we propose a new optimal control method for robust control of nonlinear robot manipulators. Many industrial robot systems are required to perform relatively large angular movement with sufficient accuracy. In real circumstances, highly nonlinear manipulator dynamics and uncertainties such as unknown load placed on the manipulator, external disturbance, and joint friction make the precise control of manipulators a very challenging task. The main contribution of this work is to develop a new robust control strategy to accomplish the precise control of robot manipulators under load uncertainty using a nonlinear optimal control formulation and solution. This methodology is based on the underlying relation between the robust stability and performance optimality. A class of robust control problems can be transformed to an equivalent optimal control problem by incorporating the uncertainty bounds into the cost functional. The θ-D optimal control approach is utilized to find an approximate closed-form feedback solution to the resultant nonlinear optimal control problem via a perturbation process. Numerical simulations show that the proposed robust controller is able to control the robot manipulator precisely under large load variations.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号