裂纹转子在支承松动时的振动特性研究

以具有支承松动的Jeffcott裂纹转子为研究对象，分析了支承松动和轴上横向裂纹对转子系统刚度的影响，建立了转子系统振动的微分方程，并用数值方法分析了其振动特性。分析表明，转子在裂纹和支承松动这两种非线性因素的作用下，表现出复杂的非线性行为。     

具有非线性支撑和弹性边界约束的轴向载荷梁结构动力学行为研究

弹性梁结构作为一种基本单元被广泛于建筑、航空、航天、船舶等工程领域. 为有效降低弹性梁结构的振动水平, 深刻理解其振动特性、动力学行为显得尤为重要. 本文建立了具有非线性支撑和弹性边界约束的轴向载荷梁结构动力学分析模型, 并采用伽辽金截断法预报梁结构的动力学响应. 在伽辽金截断法的求解过程中, 选取具有弹性边界约束的轴向载荷梁结构的模态振型函数作为伽辽金截断法的试函数与权函数. 首先, 研究截断数对伽辽金截断法稳定性的影响, 并采用谐波平衡法研究伽辽金截断法的可靠性. 在此基础上, 研究谐波激励扫频方向、非线性支撑参数对具有非线性支撑和弹性边界约束的轴向载荷梁结构动力学响应的影响规律. 研究结果表明, 具有非线性支撑和弹性边界约束的轴向载荷梁结构的动力学响应具有初值敏感性且非线性支撑参数对梁结构动力学响应的影响显著. 相关非线性支撑参数使得梁结构出现复杂动力学行为. 合适的非线性支撑参数能够抑制具有非线性支撑和弹性边界约束的轴向载荷梁结构的复杂动力学行为并对梁结构边界处的减振具有有益效果.      

含裂纹梁非线性静动力特性及简化动力学建模Static and dynamic behaviour of cracked beam and simplified dynamic model

主要研究裂纹对梁结构动力特性的影响规律，进而为含裂纹梁结构状态监测提供理论依据。首先，对裂纹影响区域进行分析，建立含裂纹梁二维接触非线性有限元模型，阐明含裂纹梁具有拉压不同刚度的静力特性；其次，通过对机理模型的分析，指出拉压不同刚度会引起轴向与弯曲的耦合振动；然后，通过非线性动力学分析方法研究其动力特性，观察到含裂纹梁在冲击荷载下会产生轴向与弯曲的耦合振动现象，并指出这种轴向与弯曲耦合振动的一个重要特征是轴向振动频谱图中含有弯曲振动基频的两倍频成分；最后，通过引入非线性弹簧建立一种新颖的含裂纹梁简化动力学模型，通过与精细有限元分析对比，验证了模型的合理性。该简化动力学模型将接触非线性问题转换为材料非线性问题，避免了费时的接触非线性动力学求解过程。     

剪切流作用下层合梁非线性振动特性研究

针对剪切流中层合梁的大变形非线性振动问题, 采用高阶剪切变形锯齿理论和冯·卡门应变描述层合梁的变形模式和几何非线性效应, 构建了大变形层合梁非线性振动有限元数值模型; 采用基于任意拉格朗日?欧拉方法的有限体积法求解不可压缩黏性流体纳维-斯托克斯方程, 结合层合梁和流体的耦合界面条件建立了剪切流作用下层合梁流固耦合非线性动力学数值模型, 采用分区并行强耦合方法对层合梁的流致非线性振动响应进行了迭代计算. 研究了不同速度分布的剪切流作用下单层梁和多层复合材料梁的振动响应特性, 并验证了本文数值建模方法的有效性. 结果表明: 剪切流作用下单层梁的振动特性与均匀流作用下的情况不同, 梁的运动轨迹受剪切流影响向下偏斜, 随着速度分布系数增加, 尾部流场中的涡结构发生改变; 刚度比对剪切流作用下层合梁的振动特性有显著影响, 随着刚度比的增加, 层合梁振动的振幅增大, 主导频率下降, 运动轨迹由‘8’字形逐渐变得不对称; 发现了不同厚度比和铺层角度情况下, 层合梁存在定点稳定模式、周期极限环振动模式和非周期振动模式三种不同的振动模式, 改变层合梁铺层角度可实现层合梁周期极限环振动模式向非周期振动模式转变.      

梁的纵向与横向耦合振动的动力学分析

研究了梁发生纵向与横向耦合振动时的非线性动力学行为.从梁的基本方程出发,利用Galerkin截断得到了梁含二次非线性项和三次非线性项的运动微分方程,并通过多尺度法对控制方程进行摄动求解得出了梁纵向模态和横向模态之间产生的内共振.然后对内共振条件下的梁进行了分析和数值模拟,分别讨论了纵向和横向荷载作用下结构的动力学特征.分析表明一定条件下梁存在能量在振动模态间传递的饱和现象,并且某些参数组合下纵向和横向振动之间存在相互耦合的无周期响应现象,从而引起梁结构的大幅振动.     

功能梯度材料梁自由振动的线性与非线性振动

基于数值模拟和理论分析两种方法，研究了功能梯度材料(functional gradient materials,FGM)梁自由振动下的线性与非线性振动问题。通过解析法求解了FGM梁在经典理论下以及一阶剪切理论下的力学行为，得到了FGM梁在简支和固端约束下的固有频率。理论分析了不同边界条件、不同梁理论下、梯度指数、长细比等因素对于FGM梁固有频率的影响；不论经典梁理论还是一阶剪切理论，随着梯度指数的增加，FGM梁的固有频率都随之减小。通过ABAQUS仿真模拟，得到FGM梁数值模拟下的非线性固有频率。将理论解与数值解进行对比，完善力学模型。在多种理论下，利用解析法和数值模拟的方法，给出FGM梁结构振动响应的线性与非线性解。     

分析弹性支承输流管道的失稳临界流速

研究了两端弹性支承输流管道静态失稳和动态失稳临界流速. 根据梁模型横向弯曲振动模态 函数，由两端弹性支承的边界条件得到了其模态函数的一般表达式. 根据特征方程具体分析 了弹性支承刚度、质量比、流体压力和管截面轴向力等主要参数对失稳临界流速的影响. 数 值计算结果表明，管道在弹性支承下的动力稳定性比较复杂，在较小的弹性支承刚度和较小 的参数范围内，管道主要表现为动态颤振失稳；在较大的弹性支承刚度和较大的参数作用下， 管道的失稳形式主要表现为静态失稳；并且失稳临界流速随流体压力和管截面轴向压力的增 加而下降，随管截面轴向拉力的增加而上升.     

基于三阶剪切变形理论的悬臂输流管道自由振动

采用三阶剪切变形理论,结合有限元法研究了悬臂输流管道的自由振动问题．利用虚功原理建立了输流管系统的有限元方程,同时将悬臂端弹性支承以势能的形式引入到系统方程中,求解了系统前三阶的复频率．分别探讨了流体速度和弹簧刚度对系统复频率实部和虚部的影响,重点分析了弹簧刚度与前三阶固有频率间的关系．在弹性支承刚度为零的特例下,对比了本文结果与Timoshenko梁理论的结果,证明了本文方法的可靠性．研究发现系统固有频率的实部恒为负值,表明一端带有弹性支承的约束形式有利于提高悬臂输流管道自由振动的稳定性;流体的流动对管道振动起到了阻尼作用,在流动速度足够大的情况下,各阶振动固有频率均趋于零;当弹簧刚度为无穷大,且流体速度足够大时,输流管道将发生失稳．     

黏性流体环境下V型悬臂梁结构流固耦合振动特性研究

V型悬臂梁结构在原子力显微镜、微纳机械传感器件中得到了广泛应用, 该结构通常在黏性流体环境下实现精密检测、传感与性能表征,同时也会使得结构的流固耦合振动特性更为复杂, 直接影响器件的动态性能.本文针对V型结构变截面、变刚度等复杂几何特征, 建立了黏性流体环境下V型悬臂梁结构的流固耦合动力学模型, 导出了基于截面孔宽比参数的梁结构的修正水动力函数, 确定了截面孔宽比和频率参数影响下V型悬臂梁结构的水动力函数;理论分析得到了黏性流体中V型梁结构的频率响应特性.同时, 设计了多种不同几何尺寸的V型梁结构, 并在水环境中开展了实验验证, 结果表明, 实验所得频率响应与理论分析结果吻合较好, 验证了V型梁结构水动力函数修正表达式及流固耦合动力学模型.此外, 基于该流固耦合动力学模型, 详细分析了不同流体黏度、V 型梁角度及尺寸变化对耦合系统振动特性的影响.      

两端弹性支承输流管道固有特性研究

输流管道广泛应用于航天航空、石油化工、海洋等重要的工程领域, 其振动特性尤其是系统固有特性一直是国内外学者研究的热点问题. 本文研究了两端弹性支承输流管道横向振动的固有特性, 尤其是在非对称弹性支承下的系统固有特性. 使用哈密顿原理得到了输流管道的控制方程及边界条件, 通过复模态法得到了静态管道的模态函数, 以其作为伽辽金法的势函数和权函数对线性派生系统控制方程进行截断处理. 分析了两端对称支承刚度、两端非对称支承刚度、管道长度以及流体质量比对系统固有频率的影响规律, 重点讨论了管道两端可能形成的非对称支承条件下固有频率的变化规律. 结果表明, 较大的对称支承刚度下管道的第一阶固有频率下降较快; 当管道两端支承刚度变化时, 管道的各阶固有频率在两端支承刚度相等时取得最值; 对于两端非对称支承的管道而言, 两端支承刚度越接近, 第一阶固有频率下降的越快, 而且相应的临界流速越小; 流体的流速越大, 其对两端非对称弹簧支承的管道固有频率的影响更为明显.      

Postbuckling of elastic beam subjected to a concentrated moment within the span length of beam

This paper aims to present the exact closed form solutions and postbuckling behavior of the beam under a concentrated moment within the span length of beam. Two approaches are used in this paper. The nonlinear governing differential equations based on elastica theory are derived and solved analytically for the exact closed form solutions in terms of elliptic integral of the first and second kinds. The results are presented in graphical diagram of equilibrium paths, equilibrium configurations and critical loads. For validation of the results from the first approach, the shooting method is employed to solve a set of nonlinear differential equations with boundary conditions. The set of nonlinear governing differential equations are integrated by using Runge–Kutta method fifth order with adaptive step size scheme. The error norms of the end conditions are minimized within prescribed tolerance (10⁻⁵). The results from both approaches are in good agreement. From the results, it is found that the stability of this type of beam exhibits both stable and unstable configurations. The limit load point existed. The roller support can move through the hinged support in some cases of β and leads to the more complex of the configuration shapes of the beam.     

基于材料力学弯曲理论求解非线性梁的探讨

基于材料力学弯曲理论,利用广义变分原理研究了非线性本构关系静不定梁支承反力的求解,指出了有关文献求解非线性本构关系静不定梁支承反力存在的错误．研究结果表明：本构关系为的静不定梁弯曲时,会同时存在曲率为正、曲率为负的梁段．当n为奇数时,曲率为正梁段的余能表达形式与曲率为负的余能表达式相同．当n为偶数时,曲率为正梁段的余能表达式与曲率为负梁段的余能表达式则不相同,存在正负号的差异．     

Vibration suppression and higher branch responses of beam with parallel nonlinear energy sinks

The effects of nonlinear energy sink (NES) on vibration suppression of a simply supported beam are investigated in this work. The slow flow equations of the system are derived by using complexification–averaging method, and the validity of the derivation is verified. By comparing the vibration absorption of single and parallel NESs of equal mass, it is found that the latter exhibits superior vibration absorption performance. In addition, the parallel NES can eliminate higher branch responses of the system under the harmonic load. Furthermore, it is found that parallel NES can eliminate the higher branches of the system more effectively by tuning nonlinear stiffness and damping. Moreover, the thermal effect on natural frequencies of the simply supported beam is considered, and the influences of the parallel NES’s parameters on the energy dissipation rate under shock load are investigated. The nonlinear responses of the simply supported beam with parallel NES under harmonic load and with the increase of temperature are described.     

ADOMIAN POLYNOMIALS FOR NONLINEAR RESPONSE OF SUPPORTED TIMOSHENKO BEAMS SUBJECTED TO A MOVING HARMONIC LOAD

This paper investigates the steady-state responses of a Timoshenko beam of infinite length supported by a nonlinear viscoelastic Pasternak foundation subjected to a moving harmonic load. The nonlinear viscoelastic foundation is assumed to be a Pasternak foundation with linear-plus-cubic stiffness and viscous damping. Based on Timoshenko beam theory, the nonlinear equations of motion are derived by considering the effects of the shear deformable beams and the shear modulus of foundations at the same time. For the first time, the modified Adomian decomposition method（ADM） is used for solving the response of the beam resting on a nonlinear foundation. By employing the standard ADM and the modified ADM, the nonlinear term is decomposed, respectively. Based on the Green＇s function and the theorem of residues presented,the closed form solutions for those linear iterative equations have been determined via complex Fourier transform. Numerical results indicate that two kinds of ADM predict qualitatively identical tendencies of the dynamic response with variable parameters, but the deflection of beam predicted by the modified ADM is smaller than that by the standard ADM. The influence of the shear modulus of beams and foundation is investigated. The numerical results show that the deflection of Timoshenko beams decrease with an increase of the shear modulus of beams and that of foundations.     

Nonlinear vibration of a rotating cantilever beam in a surrounding magnetic field

The nonlinear vibrations of a rotating cantilever beam made of magnetoelastic materials surrounded by a uniform magnetic field are investigated. The kinetic energy, potential energy and work done by the electromagnetic force are obtained. A nonlinear dynamic model, based on the Hamilton principle, which includes the stretching vibration and bending vibration is presented. The Galerkin method is adopted to discretize the dynamic equations. The proposed method is validated by comparison with the literature. The nonlinear behaviors of the responses are studied. Then simulations for different kinds of magnetic field are conducted. The effects of magnetic field parameters, including the amplitude, plane angle, spatial angle and time-varying frequency, on the dynamic behaviors of the stretching motion and bending motion are investigated in detail. The results illustrate that the interaction effects between the rotating cantilever beam and the magnetic field will increase the vibration amplitude and fluctuation of the beam. In particular, we found that: collinear magnetic fields with equal amplitude lead to the same dynamic responses; the amplitude of magnetic field intensity increases the dynamic responses remarkably; the response amplitude changes nonlinearly with the plane angle and spatial angle of the magnetic field; and the increase of time-varying frequency enhances dynamic responses of the rotating cantilever beam.     

大变形柔性多体系统非线性动力学数值仿真与实验研究

提出了一种作大范围运动柔性梁的非接触动态测试技术.在基于位移的柔性多体系统几何精确建模及非线性有限元分析技术的基础上,利用EAGLE-500运动分析系统及其相应的分析软件对作大范围运动钛合金柔性梁作了实验研究,并且利用之前提出的几何精确梁理论进行数值仿真.数值仿真结果与实验结果完全吻合,验证了作者所提的几何精确梁理论及...     

Enhanced nonlinear 3D Euler–Bernoulli beam with flying support

Using Hamilton’s principle the coupled nonlinear partial differential motion equations of a flying 3D Euler–Bernoulli beam are derived. Stress is treated three dimensionally regardless of in-plane and out-of-plane warpings of cross-section. Tension, compression, twisting, and spatial deflections are nonlinearly coupled to each other. The flying support of the beam has three translational and three rotational degrees of freedom. The beam is made of a linearly elastic isotropic material and is dynamically modeled much more accurately than a nonlinear 3D Euler–Bernoulli beam. The accuracy is caused by two new elastic terms that are lost in the conventional nonlinear 3D Euler–Bernoulli beam theory by differentiation from the approximated strain field regarding negligible elastic orientation of cross-sectional frame. In this paper, the exact strain field concerning considerable elastic orientation of cross-sectional frame is used as a source in differentiations although the orientation of cross-section is negligible.     

挠性根部梁的动力学建模

挠性根部梁具有整体平动和转动自由度，其传统模型只适宜根部挠性很小的梁．采用柔性多体系统的建模方法建立了挠性根部Euler—Bernoulli梁的非线性动力学模型及线性耦合模型，所建模型不受根部挠性大小的限制；既可描述挠性根部梁的耦合振动，也可分别退化为固支梁或刚性梁的动力学模型；且线性耦合模型可线性变换为挠性根部梁传统模型．作为算例，采用假设模态法分析了两类线性模型的振动特性，表明线性耦合模型优于挠性根部梁传统模型．     

Static behavior and bifurcation of a monosymmetric open cross-section thin-walled beam: Numerical and experimental analysis

The aim of the paper is the numerical and experimental validation of a previously developed nonlinear one-dimensional model of inextensional, shear undeformable, thin-walled beam with an open cross-section. Nonlinear in-plane and out-of-plane warping and torsional elongation effects are included in the model. To better understand the role of these new contributions a beam with a section with one symmetry axis, undergoing moderately large flexural curvatures and large torsional curvature is taken into account. To obtain a section of a cantilever beam for which the torsional curvature is expected to prevail with respect to the flexural ones, a preliminary study is performed. The attention is focused on the response to static forces and on the stability of the equilibrium branches. Analytical results are compared with results of two different nonlinear finite element models and mainly with experimental results to confirm the validity of the analytical model. Interesting results are obtained for the critical values of the flexural–torsional instability loads.