Finite volume scheme for the solution of fluid flow problems on unstructured non‐staggered grids

A recently developed non‐staggered methodology which uses the principle of applying fourth‐order dissipation to the governing pressure‐correction equation is developed so it can be applied to unstructured grids. A finite volume methodology is used for discretization. The fourth‐order dissipation term is found using second‐order gradient operators. This makes it straightforward to incorporate the dissipation term on unstructured grids. The new methodology is compared with solutions from a standard finite volume second‐order flow solver and is also tested for a standard laminar driven‐lid flow problem with grids systems that do not have a uniform structure. Finally, we demonstrate how the new methodology can be used to predict flow over a wavy boundary. Copyright © 2002 John Wiley & Sons, Ltd.     

Local block refinement with a multigrid flow solver

A local block refinement procedure for the efficient computation of transient incompressible flows with heat transfer is presented. The procedure uses patched structured grids for the blockwise refinement and a parallel multigrid finite volume method with colocated primitive variables to solve the Navier‐Stokes equations. No restriction is imposed on the value of the refinement rate and non‐integer rates may also be used. The procedure is analysed with respect to its sensitivity to the refinement rate and to the corresponding accuracy. Several applications exemplify the advantages of the method in comparison with a common block structured grid approach. The results show that it is possible to achieve an improvement in accuracy with simultaneous significant savings in computing time and memory requirements. Copyright © 2002 John Wiley & Sons, Ltd.     

A stabilized finite element formulation for high‐speed inviscid compressible flows using finite calculus

This paper aims at the development of a new stabilization formulation based on the finite calculus (FIC) scheme for solving the Euler equations using the Galerkin FEM on unstructured triangular grids. The FIC method is based on expressing the balance of fluxes in a space–time domain of finite size. It is used to prevent the creation of instabilities typically present in numerical solutions due to the high convective terms and sharp gradients. Two stabilization terms, respectively called streamline term and transverse term, are added via the FIC formulation to the original conservative equations in the space–time domain. An explicit fourth‐order Runge–Kutta scheme is implemented to advance the solution in time. The presented numerical test examples for inviscid flows prove the ability of the proposed stabilization technique for providing appropriate solutions especially near shock waves. Although the derived methodology delivers precise results with a nearly coarse mesh, a mesh refinement technique is coupled to the solution process for obtaining a suitable mesh particularly in the high‐gradient zones. Copyright © 2014 John Wiley & Sons, Ltd.     

动态混合网格生成及隐式非定常计算方法

建立了一种基于动态混合网格的非定常数值计算方法. 混合网格由贴体的四边形网格、外场 的多层次矩形网格和中间的三角形网格构成. 当物体运动时，贴体四边形网格随物体运动而 运动，而外场的矩形网格保持静止，中间的三角形网格随之变形；当物体运动位移较大，导 致三角形网格的质量降低，甚至导致网格相交时，在局部重新生成网格. 新网格上的物理量 由旧网格上的物理量插值而得. 为了提高计算效率，采用了双时间步和子迭代相结合的隐式 有限体积格式计算非定常Navier-Stokes方程. 子迭代采用高效的块LU-SGS方法. 利用该 方法数值模拟了NACA0012振荡翼型的无黏和黏性绕流，得到了与实验和他人计算相当一致 的结果.     

CFD simulation of two‐ and three‐dimensional free‐surface flow

The paper describes the implementation of moving‐mesh and free‐surface capabilities within a 3‐d finite‐volume Reynolds‐averaged‐Navier–Stokes solver, using surface‐conforming multi‐block structured meshes. The free‐surface kinematic condition can be applied in two ways: enforcing zero net mass flux or solving the kinematic equation by a finite‐difference method. The free surface is best defined by intermediate control points rather than the mesh vertices. Application of the dynamic boundary condition to the piezometric pressure at these points provides a hydrostatic restoring force which helps to eliminate any unnatural free‐surface undulations. The implementation of time‐marching methods on moving grids are described in some detail and it is shown that a second‐order scheme must be applied in both scalar‐transport and free‐surface equations if flows driven by free‐surface height variations are to be computed without significant wave attenuation using a modest number of time steps. Computations of five flows of theoretical and practical interest—forced motion in a pump, linear waves in a tank, quasi‐1d flow over a ramp, solitary wave interaction with a submerged obstacle and 3‐d flow about a surface‐penetrating cylinder—are described to illustrate the capabilities of our code and methods. Copyright © 2003 John Wiley & Sons, Ltd.     

Simulation of interface and free surface flows in a viscous fluid using adapting quadtree grids

A new adaptive quadtree method for simulating laminar viscous fluid problems with free surfaces and interfaces is presented in this paper. The Navier–Stokes equations are solved with a SIMPLE‐type scheme coupled with the Compressive Interface Capturing Scheme for Arbitrary Meshes (CICSAM) (Numerical prediction of two fluid systems with sharp interfaces, Ph.D. Thesis, Imperial College of Science, Technology and Medicine, London, 1997) volume of fluid (VoF) method and PLIC reconstruction of the volume fraction field during refinement and derefinement processes. The method is demonstrated for interface advection cases in translating and shearing flow fields and found to provide high interface resolution at low computational cost. The new method is also applied to simulation of the collapse of a water column and the results are in excellent agreement with other published data. The quadtree grids adapt to follow the movement of the free surface, whilst maintaining a band of the smallest cells surrounding the surface. The calculation is made on uniform and adapting quadtree grids and the accuracy of the quadtree calculation is shown to be the same as that made on the equivalent uniform grid. Copyright © 2004 John Wiley & Sons, Ltd.     

Finite‐volume‐type VOF method on dynamically adaptive quadtree grids

This paper describes a finite‐volume volume‐of‐fluid (VOF) method for simulating viscous free surface flows on dynamically adaptive quadtree grids. The scheme is computationally efficient in that it provides relatively fine grid resolution at the gas–liquid interface and coarse grid density in regions where flow variable gradients are small. Special interpolations are used to ensure volume flux conservation where differently sized neighbour cells occur. The numerical model is validated for advection of dyed fluid in unidirectional and rotating flows, and for two‐dimensional viscous sloshing in a rectangular tank. Copyright © 2004 John Wiley & Sons, Ltd.     

Parallel adaptive refinement for unsteady flow calculations on 3D unstructured grids

A parallel adaptive refinement algorithm for three‐dimensional unstructured grids is presented. The algorithm is based on an hierarchical h‐refinement/derefinement scheme for tetrahedral elements.The algorithm has been fully parallelized for shared‐memory platforms via a domain decomposition of the mesh at the algebraic level. The effectiveness of the procedure is demonstrated with applications which involve unsteady compressible fluid flow. A parallel speedup study of the algorithm also is included. Published in 2004 by John Wiley & Sons, Ltd.     

Evaluation of adaptive mesh refinement and coarsening for the computation of compressible flows on unstructured meshes

The compressible gas flows of interest to aerospace applications often involve situations where shock and expansion waves are present. Decreasing the characteristic dimension of the computational cells in the vicinity of shock waves improves the quality of the computed flows. This reduction in size may be accomplished by the use of mesh adaption procedures. In this paper an analysis is presented of an adaptive mesh scheme developed for an unstructured mesh finite volume upwind computer code. This scheme is tailored to refine or coarsen the computational mesh where gradients of the flow properties are respectively high or low. The refinement and coarsening procedures are applied to the classical gas dynamic problems of the stabilization of shock waves by solid bodies. In particular, situations where oblique shock waves interact with an expansion fan and where bow shocks arise around solid bodies are considered. The effectiveness of the scheme in reducing the computational time, while increasing the solution accuracy, is assessed. It is shown that the refinement procedure alone leads to a number of computational cells which is 20% larger than when alternate passes of refinement and coarsening are used. Accordingly, a reduction of computational time of the same order of magnitude is obtained. Copyright © 2005 John Wiley & Sons, Ltd.     

Boiling flow simulations on adaptive octree grids

Boiling flow simulations are conducted on adaptive octree grids. A phase change model consistent with the mixture formulation, in conjunction with the Volume-of-Fluid (VOF) model, is used to track the liquid–vapor interface. Test cases including Rayleigh Taylor instability and bubble growth in a uniform superheat are conducted to validate the phase change model on adaptive grids. The validated model is then used to conduct film boiling simulations on both two-dimensional and three-dimensional adaptive grids. The average wall Nusselt number agrees well with the widely accepted correlations of Berenson (1961) and Klimenko (1981) and Klimenko and Shelepen (1982) for film boiling on a horizontal surface. For the test cases presented, the efficiency of the adaptive technique, as measured by the adaptive mesh refinement (AMR) efficiency, is mostly in the range of 50–80%. Although this efficiency is a function of the nature and dimensionality of the problem, this range of efficiency is comparable to those obtained in the simulations of primary jet atomization conducted by Fuster et al. (2009). This work opens the prospect of conducting more realistic (three-dimensional) multi-modal boiling flow simulations, and problems of similar complexity, in an efficient manner.     

Anisotropic mesh adaptation: towards user‐independent,mesh‐independent and solver‐independent CFD. Part II. Structured grids

The present paper is the second article in a three‐part series on anisotropic mesh adaptation and its application to (2‐D) structured and unstructured meshes. In the first article, the theory was presented, the methodology detailed and brief examples given of the application of the method to both types of grids. The second part details the application of the mesh adaptation method to structured grids. The adaptation operations are restricted to mesh movement in order to avoid the creation of hanging nodes. Being based on a spring analogy with no restrictive orthogonality constraint, a wide grid motion is allowed. The adaptation process is first validated on analytical test cases and its high efficiency is shown on relevant transonic and supersonic benchmarks. These latter test cases are also solved on adapted unstructured grids to provide a reference for comparison studies. The third part of the series will demonstrate the capability of the methodology on 2‐D unstructured test cases. Copyright © 2002 John Wiley & Sons, Ltd.     

High‐order ENO and WENO schemes for unstructured grids

This work describes the implementation and analysis of high‐order accurate schemes applied to high‐speed flows on unstructured grids. The class of essentially non‐oscillatory schemes (ENO), that includes weighted ENO schemes (WENO), is discussed in the paper with regard to the implementation of third‐ and fourth‐order accurate methods. The entire reconstruction process of ENO and WENO schemes is described with emphasis on the stencil selection algorithms. The stencils can be composed by control volumes with any number of edges, e.g. triangles, quadrilaterals and hybrid meshes. In the paper, ENO and WENO schemes are implemented for the solution of the dimensionless, 2‐D Euler equations in a cell centred finite volume context. High‐order flux integration is achieved using Gaussian quadratures. An approximate Riemann solver is used to evaluate the fluxes on the interfaces of the control volumes and a TVD Runge–Kutta scheme provides the time integration of the equations. Such a coupling of all these numerical tools, together with the high‐order interpolation of primitive variables provided by ENO and WENO schemes, leads to the desired order of accuracy expected in the solutions. An adaptive mesh refinement technique provides better resolution in regions with strong flowfield gradients. Results for high‐speed flow simulations are presented with the objective of assessing the implemented capability. Copyright © 2007 John Wiley & Sons, Ltd.     

A numerical stabilization framework for viscoelastic fluid flow using the finite volume method on general unstructured meshes

A robust finite volume method for viscoelastic flow analysis on general unstructured meshes is developed. It is built upon a general‐purpose stabilization framework for high Weissenberg number flows. The numerical framework provides full combinatorial flexibility between different kinds of rheological models on the one hand, and effective stabilization methods on the other hand. A special emphasis is put on the velocity‐stress‐coupling on colocated computational grids. Using special face interpolation techniques, a semi‐implicit stress interpolation correction is proposed to correct the cell‐face interpolation of the stress in the divergence operator of the momentum balance. Investigating the entry‐flow problem of the 4:1 contraction benchmark, we demonstrate that the numerical methods are robust over a wide range of Weissenberg numbers and significantly alleviate the high Weissenberg number problem. The accuracy of the results is evaluated in a detailed mesh convergence study.     

An adaptive cut‐cell method for environmental fluid mechanics

In this work we present a numerical method for solving the incompressible Navier–Stokes equations in an environmental fluid mechanics context. The method is designed for the study of environmental flows that are multiscale, incompressible, variable‐density, and within arbitrarily complex and possibly anisotropic domains. The method is new because in this context we couple the embedded‐boundary (or cut‐cell) method for complex geometry with block‐structured adaptive mesh refinement (AMR) while maintaining conservation and second‐order accuracy. The accurate simulation of variable‐density fluids necessitates special care in formulating projection methods. This variable‐density formulation is well known for incompressible flows in unit‐aspect ratio domains, without AMR, and without complex geometry, but here we carefully present a new method that addresses the intersection of these issues. The methodology is based on a second‐order‐accurate projection method with high‐order‐accurate Godunov finite‐differencing, including slope limiting and a stable differencing of the nonlinear convection terms. The finite‐volume AMR discretizations are based on two‐way flux matching at refinement boundaries to obtain a conservative method that is second‐order accurate in solution error. The control volumes are formed by the intersection of the irregular embedded boundary with Cartesian grid cells. Unlike typical discretization methods, these control volumes naturally fit within parallelizable, disjoint‐block data structures, and permit dynamic AMR coarsening and refinement as the simulation progresses. We present two‐ and three‐dimensional numerical examples to illustrate the accuracy of the method. Copyright © 2008 John Wiley & Sons, Ltd.     

A high‐precision unstructured adaptive mesh technique for gas–liquid two‐phase flows

Adaptive mesh techniques are used widely in the numerical simulations of fluid flows, and the simulation results with high accuracies are obtained by appropriate mesh adaptations. However, gas–liquid two‐phase flows are still difficult to be simulated on adaptive meshes, especially on unstructured adaptive meshes, because the physical phenomena near gas–liquid interfaces are highly complicated and in general, not modeled appropriately on adaptive meshes. In this paper, a high‐precision unstructured adaptive mesh technique for gas–liquid two‐phase flows is developed and verified/validated. In the unstructured adaptive mesh technique, the PLIC algorithm is employed to simulate interfacial dynamic behaviors and, therefore, the reconstruction method for the interfaces in refined cells is developed, which satisfies the gas and liquid volume conservations and geometrical conservations of interfaces. In addition, the physics‐based consideration is performed on the momentum calculations near interfaces, and the calculation method with gas and liquid momentum conservations is developed. For verification, the slotted‐disk revolution problem is solved. As a result, the unstructured adaptive mesh technique succeeds in reproducing the slotted‐disk shape accurately and well maintaining the shape after one full‐revolution. The dam‐break problem is also simulated and the momentum conservative calculation method succeeds in providing physically appropriate results, which show good agreements with experimental data. Therefore, it is confirmed that the developed unstructured adaptive mesh technique is very efficient to simulate gas–liquid two‐phase flows accurately. Copyright © 2010 John Wiley & Sons, Ltd.     

Multigrid third‐order least‐squares solution of Cauchy–Riemann equations on unstructured triangular grids

In this paper, a multigrid algorithm is developed for the third‐order accurate solution of Cauchy–Riemann equations discretized in the cell‐vertex finite‐volume fashion: the solution values stored at vertices and the residuals defined on triangular elements. On triangular grids, this results in a highly overdetermined problem, and therefore we consider its solution that minimizes the residuals in the least‐squares norm. The standard second‐order least‐squares scheme is extended to third‐order by adding a high‐order correction term in the residual. The resulting high‐order method is shown to give sufficiently accurate solutions on relatively coarse grids. Combined with a multigrid technique, the method then becomes a highly accurate and efficient solver. We present some results to demonstrate its accuracy and efficiency, including both structured and unstructured triangular grids. Copyright © 2006 John Wiley & Sons, Ltd.     

Validation of adaptive unstructured hexahedral mesh computations of flow around a wind turbine airfoil

In this paper we investigate local adaptive refinement of unstructured hexahedral meshes for computations of the flow around the DU91 wind turbine airfoil. This is a 25% thick airfoil, found at the mid‐span section of a wind turbine blade. Wind turbine applications typically involve unsteady flows due to changes in the angle of attack and to unsteady flow separation at high angles of attack. In order to obtain reasonably accurate results for all these conditions one should use a mesh which is refined in many regions, which is not computationally efficient. Our solution is to apply an automated mesh adaptation technique. In this paper we test an adaptive refinement strategy developed for unstructured hexahedral meshes for steady flow conditions. The automated mesh adaptation is based on local flow sensors for pressure, velocity, density or a combination of these flow variables. This way the mesh is refined only in those regions necessary for high accuracy, retaining computational efficiency. A validation study is performed for two cases: attached flow at an angle of 6° and separated flow at 12°. The results obtained using our adaptive mesh strategy are compared with experimental data and with results obtained with an equally sized non‐adapted mesh. From these computations it can be concluded that for a given computing time, adapted meshes result in solutions closer to the experimental data compared to non‐adapted meshes for attached flow. Finally, we show results for unsteady computations. Copyright © 2005 John Wiley & Sons, Ltd.     

An agglomeration‐based adaptive discontinuous Galerkin method for compressible flows

In this work, we exploit the possibility to devise discontinuous Galerkin discretizations over polytopic grids to perform grid adaptation strategies on the basis of agglomeration coarsening of a fine grid obtained via standard unstructured mesh generators. The adaptive agglomeration process is here driven by an adjoint‐based error estimator. We investigate several strategies for converting the error field estimated solving the adjoint problem into an agglomeration factor field that is an indication of the number of elements of the fine grid that should be clustered together to form an agglomerated element. As a result the size of agglomerated elements is optimized for the achievement of the best accuracy for given grid size with respect to the target quantities. To demonstrate the potential of this strategy we consider problem‐specific outputs of interest typical of aerodynamics, eg, the lift and drag coefficients in the context of inviscid and viscous flows test cases.     

A deconvolution‐based fourth‐order finite volume method for incompressible flows on non‐uniform grids

This paper is concerned with the development of a new high‐order finite volume method for the numerical simulation of highly convective unsteady incompressible flows on non‐uniform grids. Specifically, both a high‐order fluxes integration and the implicit deconvolution of the volume‐averaged field are considered. This way, the numerical solution effectively stands for a fourth‐order approximation of the point‐wise one. Moreover, the procedure is developed in the framework of a projection method for the pressure–velocity decoupling, while originally deriving proper high‐order intermediate boundary conditions. The entire numerical procedure is discussed in detail, giving particular attention to the consistent discretization of the deconvolution operation. The present method is also cast in the framework of approximate deconvolution modelling for large‐eddy simulation. The overall high accuracy of the method, both in time and space, is demonstrated. Finally, as a model of real flow computation, a two‐dimensional time‐evolving mixing layer is simulated, with and without sub‐grid scales modelling. Copyright © 2003 John Wiley & Sons, Ltd.     

Three‐dimensional instability of axisymmetric flows: solution of benchmark problems by a low‐order finite volume method

Several problems on three‐dimensional instability of axisymmetric steady flows driven by convection or rotation or both are studied by a second‐order finite volume method combined with the Fourier decomposition in the periodic azimuthal direction. The study is focused on the convergence of the critical parameters with mesh refinement. The calculations are done on the uniform and stretched grids with variation of the stretching. Converged results are reported for all the problems considered and are compared with the previously published data. Some of the calculated critical parameters are reported for the first time. The convergence studies show that the three‐dimensional instability of axisymmetric flows can be computed with a good accuracy only on fine enough grids having about 100 nodes in the shortest spatial direction. It is argued that a combination of fine uniform grids with the Richardson extrapolation can be a good replacement for a grid stretching. It is shown once more that the sparseness of the Jacobian matrices produced by the finite volume method allows one to enhance performance of the Newton and Arnoldi iteration procedures by combining them with a direct sparse linear solver instead of using the Krylov‐subspace‐based iteration methods. Copyright © 2006 John Wiley & Sons, Ltd.