孔结构金属复合夹芯板抗爆炸冲击响应及吸能特性研究

采用有限元方法研究爆炸载荷下四边固支孔结构金属复合夹芯板的动力响应及吸能特性，给出了孔结构金属复合夹芯板的动力响应过程，得到夹芯板的变形模式，比较了孔结构金属复合夹芯板与非孔结构金属复合夹芯板的抗爆炸冲击性能，同时讨论了孔大小、间距、排布方式和面板质量分布等因素对孔结构金属复合夹芯板抗爆炸冲击性能的影响。研究结果表明，迎爆面外面板的孔设计使爆炸冲击波穿过孔洞直接作用在芯材上，增强了芯材的压缩，从而提高了夹芯板的能量吸收能力。同等面密度情况下，内外面板厚度比大于1的孔结构金属复合夹芯板变形挠度小于内外面板厚度比小于1的孔结构金属复合夹芯板。进一步研究发现，通过合理设计内外面板的质量分布，可以使孔结构金属复合夹芯板的抗爆炸冲击性能最优。     

A comprehensive analysis of functionally graded sandwich plates: Part 1—Deflection and stresses

A two-dimensional solution is presented for bending analysis of simply supported functionally graded ceramic–metal sandwich plates. The sandwich plate faces are assumed to have isotropic, two-constituent material distribution through the thickness, and the modulus of elasticity and Poisson’s ratio of the faces are assumed to vary according to a power-law distribution in terms of the volume fractions of the constituents. The core layer is still homogeneous and made of an isotropic ceramic material. Several kinds of sandwich plates are used taking into account the symmetry of the plate and the thickness of each layer. We derive field equations for functionally graded sandwich plates whose deformations are governed by either the shear deformation theories or the classical theory. Displacement functions that identically satisfy boundary conditions are used to reduce the governing equations to a set of coupled ordinary differential equations with variable coefficients. Numerical results of the sinusoidal, third-order, first-order and classical theories are presented to show the effect of material distribution on the deflections and stresses.     

具有填充材料的金属格栅夹层板在高速冲击下动态响应的数值分析

利用大型非线性有限元程序ABAQUS和LS-DYNA,对具有填充材料的金属格栅结构的冲击问题进行数值模拟.研究了不同的填充材料(金属泡沫和陶瓷)分别填充到不同的格栅构型(波纹型、蜂窝型和加强六边形)夹层板后,各类夹层板受到金属泡沫子弹和不锈钢子弹冲击时变形与能量吸收特性,探讨了夹层板上下面层板、支撑格栅及填充材料等各部分的吸能比率.研究结果表明,泡沫填充夹层板在缓冲吸能方面具有优势,陶瓷填充夹层板则在抵抗冲击穿透方面更具有优势,不同构型的夹层板,性能略有不同.     

Experimental and Numerical Investigation of Free Vibrations of Composite Sandwich Beams with Curvature and Debonds

In this paper experimental and numerical results concerning the dynamic response of composite sandwich beams with curvature and debonds are reported. Sandwich beams made of carbon/epoxy face sheets and polyurethane foam core material were manufactured with four different radii of curvature and debonds between the top and bottom interface of face sheet and foam core. Dynamic response was obtained using the impulse frequency response technique under clamped-clamped boundary condition. Experimental results were compared with numerical finite element model results. A combined experimental and numerical FE approach was used to determine the material properties of the skin and foam core materials based on modal vibration and static flexure tests. Results indicate that the fundamental frequency increases with increasing curvature angle, however, for higher frequencies; the natural frequencies are not significantly affected. Also, it is found that face/core debond causes reduction of the natural frequencies due to stiffness degradation.     

热环境中旋转运动功能梯度圆板的强非线性固有振动

研究热环境中旋转运动功能梯度圆板的非线性固有振动问题．针对金属－陶瓷功能梯度圆板，考虑几何非线性、材料物理属性参数随温度变化以及材料组分沿厚度方向按幂律分布的情况，应用哈密顿原理推得热环境中旋转运动功能梯度圆板的非线性振动微分方程．考虑周边夹支边界条件，利用伽辽金法得到了横向非线性固有振动方程，并确定了静载荷引起的静挠度．用改进的多尺度法求解强非线性方程，得出非线性固有频率表达式．通过算例，分析了旋转运动功能梯度圆板固有频率随转速、温度等参量的变化情况．结果表明，非线性固有频率随金属含量的增加而降低；随转速和圆板厚度的增大而升高；随功能梯度圆板表面温度的升高而降低．     

Buckling analysis of sandwich plates with FGM face sheets resting on elastic foundation with various boundary conditions: an analytical approach

This paper presents an analytical investigation on the buckling analysis of symmetric sandwich plates with functionally graded material (FGM) face sheets resting on an elastic foundation based on the first-order shear deformation plate theory (FSDT) and subjected to mechanical, thermal and thermo-mechanical loads. The material properties of FGM face sheets are assumed to be graded in the thickness direction according to a simple power law distribution in terms of the volume fractions of the constituents. The core layer is still homogeneous and made of an isotropic material. An analytical approach is used to reduce the governing equations of stability and then solved using an analytical solution which is named as power series Frobenius method for symmetric sandwich plates with six different boundary conditions. A detailed numerical study is carried out to examine the influence of the plate aspect ratio, side-to-thickness ratio, loading type, sandwich plate type, volume fraction index, elastic foundation coefficients and boundary conditions on the buckling response of FGM sandwich plates. This has not been done before and serves to fill the gap of knowledge in this area.     

Elasto-plastic buckling and post-buckling analysis of sandwich plates with functionally graded metal-metal face sheets and interfacial damage简

Based on the elasto-plastic theory, considering the effect of spherical stress tensor on the elasto-plastic deformation and using the slicing treatment to deal with the plasticity of functionally graded coatings, the elasto-plastic increment constitutive equations of the sandwich plates with functionally graded metal-metal face sheets can be derived. Applying the weak bonded theory to the interfacial constitutive relation and taking into account the geometric nonlinearity, the nonlinear increment differential equilibrium equations of the sandwich plates with functionally graded metal-metal face sheets are obtained by the minimum potential energy principle. The finite difference method and the iterative method are used to obtain the post-buckling path. When the effect of geometrical nonlinearity of the plate is ignored, the elasto-plastic critical buckling load of the sandwich plates with functionally graded metal-metal face sheets can be solved by the Galerkin method and the iterative method. In the numerical examples, the effects of the interface damages, the induced load ratio, the functionally graded index, and the geometry parameters on the elasto-plastic post-buckling path and the elasto-plastic critical buckling load are investigated.     

One-dimensional response of sandwich plates to underwater shock loading

The one-dimensional shock response of sandwich plates is investigated for the case of identical face sheets separated by a compressible foam core. The dynamic response of the sandwich plates is analysed for front face impulsive loading, and the effect of strain hardening of the core material is determined. For realistic ratios of core mass to face sheet mass, it is found that the strain hardening capacity of the core has a negligible effect upon the average through-thickness compressive strain developed within the core. Consequently, it suffices to model the core as an ideally plastic-locking solid. The one-dimensional response of sandwich plates subjected to an underwater pressure pulse is investigated by both a lumped parameter model and a finite element (FE) model. Unlike the monolithic plate case, cavitation does not occur at the fluid-structure interface, and the sandwich plates remain loaded by fluid until the end of the core compression phase. The momentum transmitted to the sandwich plate increases with increasing core strength, suggesting that weak sandwich cores may enhance the underwater shock resistance of sandwich plates.     

基于Zig-Zag变形假定的复合材料夹层板的自由振动

针对复合材料夹层板的实际变形特征，基于Zig-Zag变形假定和Mindlin一阶剪切理论，建立了复合材料夹层板自由振动的有限元模型，在该模型中分别对上、下面板和芯体建立了三个独立坐标系，使三部分的转角独立，为具有厚夹芯和软夹芯的复合材料夹层板的动力分析提供了一种更为准确的有限元模型；在此基础上推导了相应的刚度阵和质量阵，并采用子空间迭代法求解。夹层板的固有频率。通过典型考题证明了本模型的有效性。文中最后还通过参数讨论，研究了具有不同长厚比的复合材料夹层板基频的变化规律。     

The response of clamped sandwich plates with metallic foam cores to simulated blast loading

The dynamic responses of clamped circular monolithic and sandwich plates of equal areal mass have been measured by loading the plates at mid-span with metal foam projectiles. The sandwich plates comprise AISI 304 stainless steel face sheets and aluminium alloy metal foam cores. The resistance to shock loading is quantified by the permanent transverse deflection at mid-span of the plates as a function of projectile momentum. It is found that the sandwich plates have a higher shock resistance than monolithic plates of equal mass. Further, the shock resistance of the sandwich plates increases with increasing thickness of sandwich core. Finite element simulations of these experiments are in good agreement with the experimental measurements and demonstrate that the strain rate sensitivity of AISI 304 stainless steel plays a significant role in increasing the shock resistance of the monolithic and sandwich plates. Finally, the finite element simulations were employed to determine the pressure versus time history exerted by the foam projectiles on the plates. It was found that the pressure transient was reasonably independent of the dynamic impedance of the plate, suggesting that the metal foam projectile is a convenient experimental tool for ranking the shock resistance of competing structures.     

The dynamic response of clamped rectangular Y-frame and corrugated core sandwich plates

The dynamic response of fully clamped, monolithic and sandwich plates of equal areal mass has been measured by loading rectangular plates over a central patch with metal foam projectiles. All plates are made from AISI 304 stainless steel, and the sandwich topologies comprise two identical face-sheets and either Y-frame or corrugated cores. The resistance to shock loading is quantified by the permanent transverse deflection at mid-span of the plates as a function of projectile momentum. At low levels of projectile momentum both types of sandwich plate deflect less than monolithic plates of equal areal mass. However, at higher levels of projectile momentum, the sandwich plates tear while the monolithic plates remain intact. Three-dimensional finite element (FE) calculations adequately predict the measured responses, prior to the onset of tearing. These calculations also reveal that the accumulated plastic strains in the front face of the sandwich plates exceed those in the monolithic plates. These high plastic strains lead to failure of the front face sheets of the sandwich plates at lower values of projectile momentum than for the equivalent monolithic plates.     

Thermal buckling and post-buckling response of imperfect temperature-dependent sandwich FGM plates resting on elastic foundation

Post-buckling behaviour of sandwich plates with functionally graded material (FGM) face sheets under uniform temperature rise loading is considered. It is assumed that the plate is in contact with a Pasternak-type elastic foundation during deformation, which acts in both compression and tension. The derivation of equations is based on the first-order shear deformation plate theory. Thermomechanical non-homogeneous properties of FGM layers vary smoothly by the distribution of power law across the thickness, and temperature dependency of material constituents is taken into account. Using the non-linear von-Karman strain-displacement relations, the equilibrium and compatibility equations of imperfect sandwich plates with FGM face sheets are derived. The boundary conditions for the plate are assumed to be simply supported in all edges. The governing equations are reduced to two coupled equation in terms of stress function and lateral deflection. Employing the single mode approach combined with Galerkin technique, an approximate closed-form solution is presented to calculate the critical buckling temperature and post-buckling equilibrium path of the plate. Presented numerical examples contain the influences of power law index, sandwich plate geometry, geometrical imperfection, temperature dependency, and the elastic foundation coefficients.     

Nonlinear vibration analysis of piezo-thermo-electrically actuated functionally graded circular plates

A theoretical model for geometrically nonlinear vibration analysis of thermo-piezoelectrically actuated circular plates made of functionally grade material (FGM) is presented based on Kirchhoff’s–Love hypothesis with von-Karman type geometrical large nonlinear deformations. The material properties of the FG core plate are assumed to be graded in the thickness direction according to the power-law distribution in terms of the volume fractions of the constituents. Dynamic equations and boundary conditions including thermal, elastic and piezoelectric couplings are formulated and solutions are derived. An exact series expansion method combined with perturbation approach is used to model the nonlinear thermo-electro-mechanical vibration behavior of the structure. Control of the FG plate’s nonlinear deflections and natural frequencies using high control voltages is studied and their nonlinear effects are evaluated. Numerical results for FG plates with various mixtures of ceramic and metal are presented in dimensionless forms. A parametric study is also undertaken to highlight the effects of the thermal environment, applied actuator voltage and material composition of the FG core plate on the nonlinear vibration characteristics of the composite structure.     

考虑尺度效应的夹层楔形多孔梁动力学分析

基于修正偶应力理论, 研究了具有大范围旋转中心刚体-功能梯度夹层Euler-Bernoulli楔形多孔柔性微梁系统的动力学特性.楔形梁是中间层为不完全功能梯度层, 两表层为均质材料的功能梯度夹层结构, 它可以减小传统夹层结构由于层与层之间材料属性的不同导致脱粘类型损伤的影响.采用假设模态法描述变形, 考虑具有捕捉动力刚化效应的非线性耦合项, 计及von Kármán几何非线性应变, 运用第二类Lagrange方程, 导出了适用于较大变形的高次刚柔耦合动力学方程.对在平面内做大范围运动的中心刚体-功能梯度夹层Euler-Bernoulli楔形多孔微梁的动力学特性进行了详细研究.研究表明: 功能梯度夹层楔形梁表层结构高度、旋转角速度、功能梯度幂指数、尺度参数、孔隙度以及各层结构的体积分数对系统的动力学特性都有很大的影响; 功能梯度夹层楔形梁综合了功能梯度直梁和楔形梁的特性, 其相对于功能梯度直梁的固有频率增大, 同时使得孔隙度对结构固有频率变化趋势的影响不再与功能梯度直梁相同; 由于柔性梁变形能中具有横向与轴向的耦合势能, 系统在稳态下的平衡位置发生了迁移现象; 系统随着尺度参数的变化发生了频率转向与振型转换.      

黏弹夹芯板的有限元建模及实验研究

从有限元分析和数值模拟及实验验证的角度研究了黏弹夹芯板的频率依赖振动特性。夹芯板中间层为黏弹性材料，其刚度和阻尼的频率依赖性行为直接影响系统的模态频率和阻尼，并导致振动模式求解的复杂化。采用三阶七参数Biot模型描述黏弹性材料频率相关的黏弹性行为。开发了三层四节点28自由度的夹芯板单元，基于经典板理论和哈密顿原理建立了黏弹夹芯板的有限元动力学方程。通过引入辅助耗散坐标，将Biot模型和黏弹夹芯板的有限元动力学模型结合起来，并将其转化为常规二阶线性系统形式，极大简化了求解非线性振动特性的过程。对一边固定、另三边自由的黏弹夹芯板进行了前三阶固有频率和损耗因子的预测，并与实验结果对比。数值模拟结果和实验结果吻合良好，说明所提有限元方法是正确有效的。     

热环境下功能梯度夹层双曲壳三维自由振动分析

功能梯度夹层双曲壳结构广泛应用在航空航天、海洋工程等领域中,对于该类结构的动力学特性研究非常重要。本文以热环境下功能梯度夹层双曲壳为研究对象,在三阶剪切变形理论的基础上,考虑横向拉伸作用的影响提出了一种新的位移场,假设材料的物性参数与温度有关,且沿厚度方向表示为幂律函数。利用Hamilton原理得到简支边界条件下功能梯度夹层双曲壳三维振动系统动力学方程,利用Navier法求得两种不同夹层类型的系统固有频率。研究了几何物理参数和温度场对功能梯度夹层双曲壳自由振动固有频率的影响。     

ELASTIC-PLASTIC DYNAMIC RESPONSE OF FULLY BACKED SANDWICH PLATES UNDER LOCALIZED IMPULSIVE LOADING

An analytical model is developed to assess the elastic-plastic dynamic response of fully backed sandwich plates under localized impulse load.The core is modeled as an elastic-perfectly plastic foundation.The top face sheet is treated as an individual plate resting on the foundation.The elastic-plastic analysis for the top face sheet is based on a minimum principle in dynamic plasticity associated with the finite difference technique.The effects of spatial and temporal distributions of the impulsive loading on the dynamic response of sandwich plates are discussed.The model can be used to predict the impulse-induced local effect on fully backed sandwich plates.     

轻质金属泡沫夹芯曲板的抗爆炸冲击响应研究

夹芯结构具有高比强度、高比刚度和优异的吸能能力,已经被广泛应用于工程结构用来抵御高强度的爆炸冲击载荷。本文采用有限元数值模拟方法研究了爆炸载荷作用下四边固支夹芯曲板的动力响应。比较了同等质量下夹芯曲板、夹芯平板、实体曲板和实体平板四种结构的抗爆炸冲击性能,讨论了不同曲率和非对称因子对结构动力响应的影响,得到了使得夹芯曲板抗爆炸性能最佳的非对称因子。研究结果表明：夹芯曲板的抗爆炸冲击性能优于等质量的夹芯平板、实体曲板和实体平板结构,增大夹芯曲板的曲率能够提高结构的抗爆炸冲击性能。     

PVC夹芯板在冲击载荷下的动态响应与失效模式

通过开展对泡沫金属子弹撞击加载聚氯乙烯(polyvinyl chloride, PVC)夹芯板的实验,结合三维数字图像相关性(three dimensional digital image correlation, DIC-3D)技术,研究固支夹芯板在撞击加载条件下的动态响应,获得夹芯板受撞击及响应的变形过程,并结合图像分别分析夹芯板整体及三层结构的变形和失效模式;研究子弹冲量与背板最终变形之间的关系和相似冲量下等面密度不同芯层密度的夹芯结构的抗撞击性能。结果表明:夹芯板的破坏和失效主要集中在泡沫金属子弹直接作用区域,背板挠度由中间向固定端逐渐减小,子弹冲量与背板变形近似成线性关系。在等质量的条件下,降低芯层密度、增加芯层厚度可以有效降低背板的变形,实验结果对聚合物夹芯结构的工程优化设计具有一定的参考意义。     

Dynamic geometrically nonlinear analysis of transversely compressible sandwich plates

In order to construct a plate theory for a thick transversely compressible sandwich plate with composite laminated face sheets, the authors make simplifying assumptions regarding distribution of transverse strain components in the thickness direction. The in-plane stresses and σ_yy (Fig. 1) are computed from the constitutive equations, and the improved values of transverse stress components and σ_zz need to be computed by integration of pointwise equations of motion in a post-process stage of the finite element analysis. The improved values of the transverse strains can also be computed in the post-process stage by substituting the improved transverse stresses into the constitutive relations. A problem of cylindrical bending of a simply supported plate under a uniform load on the upper surface is considered, and comparison is made between the displacements, the in-plane stress and the improved transverse stresses (obtained by integration of the pointwise equations of motion), computed from the plate theory, with the corresponding values of exact elasticity solutions. In this comparison, a good agreement of both solutions is achieved. In the finite element analysis of sandwich plates in cylindrical bending with small thickness-to-length ratios, the shear locking phenomenon does not occur. The model of a sandwich plate in cylindrical bending, presented in this paper, has a wider range of applicability than the models presented in literature so far: it can be applied to the sandwich plates with a wide range of ratios of thickness to the in-plane dimensions, with both thin and thick face sheets (as compared to the thickness of the core) and to the sandwich plates with both transversely rigid and transversely compressible face sheets and cores.