Effect of Localization of Pulsed Energy Addition on the Wave Drag of an Airfoil in a Transonic Flow

The possibility of controlling the aerodynamic characteristics of airfoils with the help of local pulsed-periodic energy addition into the flow near the airfoil contour at transonic flight regimes is considered. By means of the numerical solution of two-dimensional unsteady equations of gas dynamics, changes in the flow structure and wave drag of a symmetric airfoil due to changes in localization and shape of energy-addition zones are examined. It is shown that the considered method of controlling airfoil characteristics in transonic flow regimes is rather promising. For a zero angle of attack, the greatest decrease in wave drag is obtained with energy addition at the trailing edge of the airfoil.__________Translated from Prikladnaya Mekhanika i Tekhnicheskaya Fizika, Vol. 46, No. 5, pp. 60–67, September–October, 2005.     

Nonlinear effects caused by pulsed periodic supply of energy in the vicinity of a symmetric airfoil in a transonic flow

Changes in the structure of a transonic flow around a symmetric airfoil and a decrease in the wave drag of the latter, depending on the energy-supply period and on localization and shape of the energy-supply zone, are considered by means of the numerical solution of two-dimensional unsteady equations of gas dynamics. Energy addition to the gas ahead of the closing shock wave in an immediate vicinity of the contour in zones extended along the contour is found to significantly reduce the wave drag of the airfoil. The nature of this decrease in drag is clarified. The existence of a limiting frequency of energy supply is found. __________ Translated from Prikladnaya Mekhanika i Tekhnicheskaya Fizika, Vol. 47, No. 3, pp. 64–71, May–June, 2006.     

The application of the gradient-based adjoint multi-point optimization of single and double shock control bumps for transonic airfoils

A shock control bump (SCB) is a flow control method that uses local small deformations in a flexible wing surface to considerably reduce the strength of shock waves and the resulting wave drag in transonic flows. Most of the reported research is devoted to optimization in a single flow condition. Here, we have used a multi-point adjoint optimization scheme to optimize shape and location of the SCB. Practically, this introduces transonic airfoils equipped with the SCB that are simultaneously optimized for different off-design transonic flight conditions. Here, we use this optimization algorithm to enhance and optimize the performance of SCBs in two benchmark airfoils, i.e., RAE-2822 and NACA-64-A010, over a wide range of off-design Mach numbers. All results are compared with the usual single-point optimization. We use numerical simulation of the turbulent viscous flow and a gradient-based adjoint algorithm to find the optimum location and shape of the SCB. We show that the application of SCBs may increase the aerodynamic performance of an RAE-2822 airfoil by 21.9 and by 22.8 % for a NACA-64-A010 airfoil compared to the no-bump design in a particular flight condition. We have also investigated the simultaneous usage of two bumps for the upper and the lower surfaces of the airfoil. This has resulted in a 26.1 % improvement for the RAE-2822 compared to the clean airfoil in one flight condition.     

Performance Improvement of a Supercritical Airfoil by a Multi-point Optimized Shock Control Channel

A shock control channel (SCC) is a flow control method introduced here to control the shock wave/boundarylayer interaction (SWBLI) in order to reduce the resulting wave drag in transonic flows. An SCC transfers an appropriate amount of mass and momentum from downstream of the shock wave location to its upstream to decrease the pressure gradient across the shock wave and as a result the shock-wave strength is reduced. Here, a multi-point optimization method under a constant-lift-coefficient constraint is used to find the optimum design of the SCC. This flow control method is implemented on a RAE-2822 supercritical airfoil for a wide range of off-design transonic Mach numbers. The RANS flow equations are solved using Roe’s averages scheme and a gradient-based adjoint algorithm is used to find the optimum location and shape of the SCC. The solver is validated against experimental works studying effect of cavities in transonic airfoils. It is shown that the application of an SCC improves the average aerodynamic efficiency in a range of off-design conditions by 13.2% in comparison with the original airfoil. The SCC is shown to be an effective tool also for higher angle of attack at transonic flows. We have also studied the SWBLI and how the optimization algorithm makes the flow wave structure and interactions of the shock wave with the boundary layer favorable.     

Criterial analysis of the effect of vibrations of an airfoil surface element on the transonic flow structure

A criterial analysis of the effect of forced vibrations of airfoil surface elements on the shock wave structure of a transonic flow around the airfoil is performed. The parameter responsible for regimes of interaction of vibrationally moving zones of the airfoil with the closing shock wave is determined. The influence of this parameter on the wave drag of the airfoil is studied.     

Effect of asymmetric pulsed periodic energy supply on aerodynamic characteristics of airfoils

The possibility of controlling the aerodynamic characteristics of airfoils in transonic flight regimes by means of local pulsed periodic energy supply is considered. The numerical solution of two-dimensional unsteady equations of gas dynamics allowed determining the changes in the flow structure near a symmetric airfoil and its aerodynamic characteristics depending on the magnitude of energy in the case of its asymmetric (with respect to the airfoil) supply. The results obtained are compared with the calculated data for the flow around the airfoil at different angles of attack without energy supply. With the use of energy supply, a prescribed lift force can be obtained with a substantially lower wave drag of the airfoil, as compared with the flow around the airfoil at an angle of attack. __________ Translated from Prikladnaya Mekhanika i Tekhnicheskaya Fizika, Vol. 48, No. 6, pp. 70–76, November–December, 2007.     

The Multi-point Optimization of Shock Control Bump with Constant-Lift Constraint Enhanced with Suction and Blowing for a Supercritical Airfoil

Both shock control bump (SCB) and suction and blowing are flow control methods used to control the shock wave/boundary layer interaction (SWBLI) in order to reduce the resulting wave drag in transonic flows. A SCB uses a small local surface deformation to reduce the shock-wave strength, while suction decreases the boundary-layer thickness and blowing delays the flow separation. Here a multi-point optimization method under a constant-lift-coefficient constraint is used to find the optimum design of SCB and suction and blowing. These flow control methods are used separately or together on a RAE-2822 supercritical airfoil for a wide range of off-design transonic Mach numbers. The RANS flow equations are solved using Roe’s averages scheme and a gradient-based adjoint algorithm is used to find the optimum location and shape of all devices. It is shown that the simultaneous application of blowing and SCB (hybrid blowing/SCB) improves the average aerodynamic efficiency at off-design conditions by 18.2 % in comparison with the clean airfoil, while this increase is only 16.9 % for the hybrid suction/SCB. We have also studied the SWBLI and how the optimization algorithm makes the flow wave structure and interactions of the shock wave with the boundary layer favorable.     

Resonant phenomena in a transonic flow around an airfoil with pulsed periodic energy supply

Interaction of a pulsed periodic source of energy with a closing shock wave arising near airfoils in transonic flight is studied. The evolution of the shock-wave structure of the flow around a symmetric airfoil is examined by solving two-dimensional unsteady gas-dynamic equations, and a resonant mechanism of interaction is found, which leads to considerable (by an order of magnitude) reduction of the wave drag of the airfoil.     

超临界翼型跨音速特性实验研究

针对新设计的超临界翼型,采用风洞实验方法验证和评估了其气动特性。在增压连续式跨音速风洞(NF-6风洞)开展了超临界翼型跨音速特性的实验研究,验证了该翼型设计的压力分布曲线特点。激波位置和波后压力平台区长度表明设计结果和实验结果基本一致,揭示了超临界翼型跨音速的气动特性;阻力发散马赫数达到期望的设计指标,探讨了雷诺数对该翼型气动特性的影响。最后采用升华法实现了翼型表面流动特性的显示。结果表明转捩点约在16%弦长位置。     

跨音速翼型上的激波／边界层干扰自适应控制计算

在激波区使用自适应壁对跨音速翼型的激波／边界层的相互作用（干扰）进行控制，可改变机翼的气动性能，这种被动控制可通过在翼型的激波区开一凹腔，其上覆盖一弹性橡胶膜柔壁来，本文给出用Ｎａｖｉｅｒ－Ｓｔｏｋｅｒ方程数值模拟这一自适应控制翼型的跨音速粘性绕流，提出了一个适应于本特殊情况（物面边界局部地区在求解过程中有变化）的处理办法。并探讨了自适应柔壁对当代跨音速翼绕流的影响。     

Adjoint‐based airfoil optimization with discretization error control

In this article, we develop a new airfoil shape optimization algorithm based on higher‐order adaptive DG methods with control of the discretization error. Each flow solution in the optimization loop is computed on a sequence of goal‐oriented h‐refined or hp‐refined meshes until the error estimation of the discretization error in a flow‐related target quantity (including the drag and lift coefficients) is below a prescribed tolerance. Discrete adjoint solutions are computed and employed for the multi‐target error estimation and adaptive mesh refinement. Furthermore, discrete adjoint solutions are employed for evaluating the gradients of the objective function used in the CGs optimization algorithm. Furthermore, an extension of the adjoint‐based gradient evaluation to the case of target lift flow computations is employed. The proposed algorithm is demonstrated on an inviscid transonic flow around the RAE2822, where the shape is optimized to minimize the drag at a given constant lift and airfoil thickness. The effect of the accuracy of the underlying flow solutions on the quality of the optimized airfoil shapes is investigated. Copyright © 2014 John Wiley & Sons, Ltd.     

Separated Flow and Buffeting Control

In transonic flow conditions, the shock wave/turbulent boundary layer interaction and the flow separations on the upper wing surfaces of civil aircraft induce flow instabilities, ‘buffet’ and then structural vibrations, ‘buffeting’. Buffeting can greatly affect aerodynamic behavior. The buffeting phenomenon appears when the aircraft's Machnumber or angle of attack increases. This phenomenon limits the aircraft's flight envelope. The objectives of this study are to cancel out or decrease the aerodynamic instabilities (unsteady separation, movement of the shock position) due to this type of flow by using control systems. The following actuators can be used: ‘Vortex Generators’ situated upstream of the shock position, a ‘Bump’ located at the shock position, and a new moving part designed by ONERA, situated on the trailing edge of the wing, the ‘Trailing Edge Deflector’ or TED. It looks like an adjustable ‘Divergent Trailing Edge’. It is an active actuator and can take different deflections or be driven by dynamic movements up to 250 Hz. Tests were performed in transonic 2D flow with models well equipped with unsteady pressure transducers. For high lift coefficients, a selected static position of the ‘Trailing Edge Deflector’ increases the wing's aerodynamic performances and delays the onset of buffet. Furthermore, in 2D flow buffet conditions, the ‘Trailing Edge Deflector’, driven by a closed-loop active control using the measurements of the unsteady wall static pressures, can greatly reduce buffet. The aerodynamic performances are not improved to the same extent by the bump actuator. From our experience, there is no effect on buffet or separated flow because of the incorrect positioning of the bump. All that can be observed is a local improvement on the intensity of the shock wave when the bump is very precisely situated at the shock position. Vortex generators have a great impact on the separated flow. The separated flow instabilities are greatly reduced and buffet is totally controlled even for strong instabilities. The aerodynamic performances of the airfoil are also greatly improved.     

Controlling Transonic Flow around Airfoils by Means of Local Pulsed Addition of Energy

The influence of local pulsed-periodic addition of energy into a supersonic region on the flow structure and wave drag of an airfoil in transonic flow regimes is considered by methods of mathematical modeling. The study reveals significant prospects of the considered method of controlling airfoil performance in transonic flow regimes, including wave-drag reduction.     

Coupled fluid structure analysis for wing 445.6 flutter using a fast dynamic mesh technology

The flow around wing 445.6 was modelled using Navier–Stokes equations and S-A model. The wing vibration and flow mesh deformation were computed using a fast dynamic mesh technology proposed by our own group. Wing 445.6 flutter was analysed through a strong coupling between the wing vibration and flow. The reduced flutter velocity was predicted and results are in good agreement with the experimental data. It is found that the subsonic flutter is mainly induced by the flow separation and the transonic and supersonic flutter are mainly caused by the oscillating shock wave and its induced flow separation. The positive aerodynamic work increases due to the oscillating shock wave when the subsonic flow becomes transonic reducing the flutter velocity. While the positive aerodynamic work induced by the oscillating shock wave decreases when the transonic flow becomes supersonic increasing the flutter velocity. That is why the transonic dip exists.     

Experimental analysis of passive bio-inspired covert feathers for stall and post-stall performance enhancement

Technologies inspired by the functioning and behavior of biological beings are commonly developed for aircraft flight. Among the bio-inspired approaches that have grown in interest, particularly for unmanned aerial vehicle flight, is based on the behavior of bird’s cover feathers under higher angles of attack. The covert feathers, when activated by separated flows, promote lift increment that helps in certain maneuvers. This work investigates the benefit in the stall and post-stall performance of employing bio-inspired covert feathers devices attached to an airfoil’s upper surface. To fill the gaps in the recent technical literature, experimental analysis of an SD7003 airfoil was executed in a wind tunnel with the application of bio-inspired covert feathers of different shapes and tapes in three chordwise positions. The bio-inspired devices were conceived to resemble the feathers’ lightness and discrete-distribution along with the wing model. Experiments were carried out measuring the aerodynamic forces and moment at Reynolds number around 170,000 for static and dynamic ramp-up and hold pitching motion. It has been confirmed that the use of bio-inspired covert feathers brought benefits to the stall and post-stall behavior of the airfoil. The maximum lift has increased, and the transition from attached to stalled flow around the airfoil tends to be smoother when the devices were used. Four shapes for the bio-inspired devices and three positions in chordwise direction were considered. The best performance among the case was encountered for a jagged bio-inspired device taped at a quarter-chord position. Indeed, the most forward position for all the devices resulted in higher maximum lift and increment to the respective angle of attack. Ramp-up and hold wind tunnel tests also confirmed the best performance of jagged bio-inspired devices nearer the leading edge. The aerodynamic response to the pitching motion showed that the stall and post-stall regime occur much smoother, indicating that the approach presents good potential for dynamic stall or gust response passive control.

     

A NUMERICAL STUDY OF OPTIMAL DRAG REDUCTION FOR TURBULENT TRANSONIC PROJECTILES USING A PASSIVE CONTROL

Abstract

The purpose of this research is to numerically study a drag reduction method—passive control of shock/boundary layer interaction, which is applied to the boattail portion of a secant-ogive-cylinder-boattail projectile in turbulent transonic flows. The flow pattern and the components of aerodynamic drag computed from numerical data are analyzed. The effectiveness of this method is studied by varying the values of parameters such as porosity distribution, maximum porosity factor and size of porous region. The conditions for optimal drag reduction are investigated and reported. The present results show that the use of this passive control method can not only reduce the boattail drag but also the base drag, and results in an additional 8% total drag reduction compared to that without the passive control technique. This passive control method can be an effective approach for the design of high-performance projectiles in the transonic regime.     

基于PCE方法的翼型不确定性分析及稳健设计

由于能够获得一个既经济又对参数变化不敏感的设计结果,稳健型设计在工程设计中备受关注. 不确定性分析是稳健型设计的关键. 因此研究了基于混沌多项式的不确定性分析方法,并将其与CFD 方法结合,对计算空气动力学设计中的不确定性影响进行了量化分析. 首先以RAE2822 翼型为算例,对其跨音速马赫数不确定影响进行了分析,研究了多项式阶次对计算的影响,分析了平均流场和方差. 接着结合超临界翼型的马赫数稳健型设计验证了混沌多项式方法在稳健型设计中的有效性. 优化结果表明,稳健型优化后的翼型阻力系数明显降低,同时对于马赫数的敏感性显著减小. 通过分析表明混沌多项式方法能够大幅提高稳健型优化设计效率,能很好地应用于气动稳定性设计.      

由激波诱导产生的二维圆柱上的非定常阻力

激波管是一种具有结构简单、参数可调范围大和使用方便等特点的气体动力学试验装置。因此,它在跨声速和超声速流的实验研究中得以广泛地应用。但由于激波管中气流的持续时间很短(通常为毫秒量级),所以在激波管中直接测量试验模型上的压力分布等气动参数将是十分困难的。本文利用马赫-曾德干涉仪在激波管中拍摄出激波在二维圆柱上的绕射和反射时的干涉图,直接给出了整个流场的密度分布。再由波后气流满足等熵关系式,可以计算得到流场的压力分布和非定常阻力的大小。     

基于PCE方法的翼型不确定性分析及稳健设计简

由于能够获得一个既经济又对参数变化不敏感的设计结果,稳健型设计在工程设计中备受关注. 不确定性分析是稳健型设计的关键. 因此研究了基于混沌多项式的不确定性分析方法,并将其与CFD 方法结合,对计算空气动力学设计中的不确定性影响进行了量化分析. 首先以RAE2822 翼型为算例,对其跨音速马赫数不确定影响进行了分析,研究了多项式阶次对计算的影响,分析了平均流场和方差. 接着结合超临界翼型的马赫数稳健型设计验证了混沌多项式方法在稳健型设计中的有效性. 优化结果表明,稳健型优化后的翼型阻力系数明显降低,同时对于马赫数的敏感性显著减小. 通过分析表明混沌多项式方法能够大幅提高稳健型优化设计效率,能很好地应用于气动稳定性设计.     

A PRESSURE-BASED EULER SCHEME FOR TRANSONIC INTERNAL AND EXTERNAL FLOW SIMULATION

SUMMARY

The development of a pressure-based Euler scheme, based on a collocated grid arrangement and solving for Cartesian mass flux components is described. An implicit numerical dissipation model, which includes second and fourth difference terms expressed in pressure, is demonstrated. A smoothing function, which includes a two-level filter, is used to adjust the second order-dissipation. The successful calculations for the inviscid transonic aerodynamic flow around airfoil NACA0012 are presented. The transonic quasi-one-dimensional flow calculation in a converging-diverging nozzle is chosen as an example of an internal flow simulation.