首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到16条相似文献,搜索用时 125 毫秒
1.
针对非均匀Winkler弹性地基上变厚度矩形板的自由振动问题,通过一种有效的数值求解方法——微分变换法(DTM),研究其无量纲固有频率特性。已知变厚度矩形板对边为简支边界条件,其他两边的边界条件为简支、固定或自由任意组合。采用DTM将非均匀Winkler弹性地基上变厚度矩形板无量纲化的自由振动控制微分方程及其边界条件变换为等价的代数方程,得到含有无量纲固有频率的特征方程。数值结果退化为均匀Winker弹性地基上矩形板以及变厚度矩形板的情形,并与已有文献采用的不同求解方法进行比较,结果表明,DTM具有非常高的精度和很强的适用性。最后,在不同边界条件下分析地基变化参数、厚度变化参数和长宽比对矩形板无量纲固有频率的影响,并给出了非均匀Winkler弹性地基上对边简支对边固定变厚度矩形板的前六阶振型。  相似文献   

2.
针对非均匀Winkler弹性地基上变厚度矩形板的自由振动问题,通过一种有效的数值求解方法——微分变换法(DTM),研究其无量纲固有频率特性。已知变厚度矩形板对边为简支边界条件,其他两边的边界条件为简支、固定或自由任意组合。采用DTM将非均匀Winkler弹性地基上变厚度矩形板无量纲化的自由振动控制微分方程及其边界条件变换为等价的代数方程,得到含有无量纲固有频率的特征方程。数值结果退化为均匀Winker弹性地基上矩形板以及变厚度矩形板的情形,并与已有文献采用的不同求解方法进行比较,结果表明,DTM具有非常高的精度和很强的适用性。最后,在不同边界条件下分析地基变化参数、厚度变化参数和长宽比对矩形板无量纲固有频率的影响,并给出了非均匀Winkler弹性地基上对边简支对边固定变厚度矩形板的前六阶振型。  相似文献   

3.
基于Euler-Bernoulli梁理论,利用广义Hamilton原理推导得到弹性地基上转动功能梯度材料(FGM)梁横向自由振动的运动控制微分方程并进行无量纲化,采用微分变换法(DTM)对无量纲控制微分方程及其边界条件进行变换,计算了弹性地基上转动FGM梁在夹紧-夹紧、夹紧-简支和夹紧-自由三种边界条件下横向自由振动的无量纲固有频率,再将控制微分方程退化到无转动和地基时的FGM梁,计算其不同梯度指数时第一阶无量纲固有频率值,并和已有文献的FEM和Lagrange乘子法计算结果进行比较,数值完全吻合。计算结果表明,三种边界条件下FGM梁的无量纲固有频率随无量纲转速和无量纲弹性地基模量的增大而增大;在一定无量纲转速和无量纲弹性地基模量下,FGM梁的无量纲固有频率随着FGM梯度指数的增大而减小;但在夹紧-简支和夹紧-自由边界条件下,一阶无量纲固有频率几乎不变。  相似文献   

4.
假定功能梯度材料(FGM)的物性参数沿环扇形板径向按照幂律梯度变化,基于平面线弹性理论,建立了FGM环扇形板面内自由振动的运动控制微分方程。采用二维微分求积法(DQM)对FGM环扇形板面内自由振动的无量纲运动控制微分方程进行离散,数值求解了不同边界条件下FGM环扇形板面内自由振动的无量纲固有频率,同时也给出了FGM环扇形板扇形角为!/4时有限元商用软件ANSYS的部分计算结果,验证了本文方法的正确性。结果表明,在相应边界条件下,FGM环扇形板的梯度指标、内外半径比以及扇形角对无量纲固有频率均有影响,其计算结果和分析方法可供设计和研究参考。  相似文献   

5.
基于Timoshenko梁理论研究多孔功能梯度材料梁(FGMs)的自由振动问题.首先,考虑多孔功能梯度材料梁的孔隙率模型,建立了两种类型的孔隙分布.其次,基于Timoshenko梁变形理论,给出位移场方程、几何方程和本构方程,利用Hamilton原理推导多孔功能梯度材料梁的自由振动控制微分方程,并进行无量纲化,然后应用微分变换法(DTM)对无量纲控制微分方程及其边界条件进行变换,得到含有固有频率的等价代数特征方程.最后,计算了固定-固定(C-C)、固定-简支(C-S)和简支-简支(S-S)三种不同边界下多孔功能梯度材料梁自由振动的无量纲固有频率.将其退化为均匀材料与已有文献数据结果对照,验证了正确性.讨论了孔隙率、细长比和梯度指数对多孔功能梯度材料梁无量纲固有频率的影响.  相似文献   

6.
为研究弹性地基上含孔隙的材料特性沿厚度呈Sigmoid函数变化的功能梯度材料(S-FGM)板的振动特性,本文基于改进的Voigt模型,分别建立了孔隙为均匀分布和非均匀分布两种类型的功能梯度材料的物性参数模型。根据复合材料薄板理论导出了弹性地基上含孔隙的功能梯度材料板的运动方程,用伽辽金法寻求四边简支边界条件下板自由振动和动力响应的解析解;讨论了孔隙、弹性地基参数、材料组分指数等因素对S-FGM板自由振动和动力响应的影响。结果表明:孔隙对板自振频率的影响比较复杂,不仅与孔隙率的大小和分布形式有关,还与弹性地基参数有关;当有弹性地基作用时,板的量纲归一化基频随着孔隙率的增大而提高,并且孔隙均匀分布的S-FGM板与孔隙非均匀分布的情况相比,其量纲归一化基频更高;孔隙增大了板的动力响应,其中孔隙为均匀分布的板的动力响应对孔隙率的变化更为敏感。  相似文献   

7.
基于Bernoulli-Euler梁理论,引入物理中面解耦了复合材料结构的面内变形与横向弯曲特性,研究了梯度多孔材料矩形截面梁在热载荷作用下的弯曲及过屈曲力学行为.假设沿梁厚度方向材料的性质是连续变化的,利用能量法推导了矩形截面梁的控制微分方程和边界条件,并用打靶法对无量纲化的控制方程进行数值求解.利用计算得到的结果分析了材料的性质、热载荷、边界条件对矩形截面梁非线性力学行为的影响.结果表明,对称材料模型下,固支梁与简支梁均显示出了典型的分支屈曲行为特征,而其临界屈曲热载荷值均会随着孔隙率系数的增加而单调增加.非对称材料模型下,固支梁仍显示出分支屈曲行为特征,但其临界屈曲热载荷不再随着孔隙率系数的变化而单调变化;而对于两端简支梁,发生了弯曲变形,弯曲挠度随载荷的增大而增大.  相似文献   

8.
为分析粘弹性地基上含孔隙的石墨烯增强功能梯度板的自由和强迫振动特性,基于三参数粘弹性地基模型及复合材料薄板理论,建立了粘弹性地基上含孔隙石墨烯增强功能梯度板的运动方程,用伽辽金法求解其固有频率和动力响应,并通过数值算例分析了粘弹性地基参数、孔隙率、孔隙类型及石墨烯纳米片分布模式、含量等因素对自由振动和动力响应的影响.结果表明,固有频率随着孔隙率的增大非单调变化,孔隙率对固有频率的影响随着地基参数、孔隙类型的不同而不同.另外,在三种孔隙类型中,上下表面层含有最少孔隙数量的板的动挠度最小,且其动挠度随着孔隙率的增大而微弱提高.  相似文献   

9.
将弹性地基视为Winkler模型,利用二维有限积分变换的方法推导出了弹性地基上四边自由矩形中厚板位移和内力的精确解.由于在求解过程中不需要预先人为选取位移函数,而是从弹性地基上中厚板的基本方程出发,直接利用有限积分变换的数学方法求出可以完全满足四边自由边界条件,弹性地基上矩形中厚板问题的精确解,使得问题的求解更加合理.最后通过计算实例验证了所采用方法及所推导出的公式的正确性.  相似文献   

10.
无网格法在点弹性支承矩形薄板横向振动中的应用   总被引:2,自引:2,他引:0  
基于薄板理论和弹性动力学Hamilton原理的推广,采用无网格伽辽金法,建立了具有有限多个点弹性支承的弹性矩形薄板横向振动的无量纲量运动微分方程,给出了其特征方程。通过求解特征方程,得出了四边简支板的无量纲固有频率随点弹性支承的刚性系数和支承位置的变化曲线,分析了点弹性支承的刚性系数和支承位置对矩形薄板横向振动特性的影响。数值计算结果表明,无网格法求解点弹性支承板横向振动问题是切实可行的。  相似文献   

11.
In this study, the mechanical buckling and free vibration of thick rectangular plates made of functionally graded materials (FGMs) resting on elastic foundation subjected to in-plane loading is considered. The third order shear deformation theory (TSDT) is employed to derive the governing equations. It is assumed that the material properties of FGM plates vary smoothly by distribution of power law across the plate thickness. The elastic foundation is modeled by the Winkler and two-parameter Pasternak type of elastic foundation. Based on the spline finite strip method, the fundamental equations for functionally graded plates are obtained by discretizing the plate into some finite strips. The results are achieved by the minimization of the total potential energy and solving the corresponding eigenvalue problem. The governing equations are solved for FGM plates buckling analysis and free vibration, separately. In addition, numerical results for FGM plates with different boundary conditions have been verified by comparing to the analytical solutions in the literature. Furthermore, the effects of different values of the foundation stiffness parameters on the response of the FGM plates are determined and discussed.  相似文献   

12.
This article presents closed-form solutions for the frequency analysis of rectangular functionally graded material(FGM) thin plates subjected to initially in-plane loads and with an elastic foundation. Based on classical thin plate theory, the governing differential equations are derived using Hamilton's principle. A neutral surface is used to eliminate stretching–bending coupling in FGM plates on the basis of the assumption of constant Poisson's ratio. The resulting governing equation of FGM thin plates has the same form as homogeneous thin plates. The separation-ofvariables method is adopted to obtain solutions for the free vibration problems of rectangular FGM thin plates with separable boundary conditions, including, for example, clamped plates. The obtained normal modes and frequencies are in elegant closed forms, and present formulations and solutions are validated by comparing present results with those in the literature and finite element method results obtained by the authors. A parameter study reveals the effects of the power law index n and aspect ratio a/b on frequencies.  相似文献   

13.
This paper provides an analytical solution for the critical buckling stress of adhesively bonded aluminum hat sections under static axial compression. The governing rectangular plate member of the structure is treated based on the differential equation for out-of-plane deflections of thin plates. Finite element eigenvalue buckling analysis is performed to verify the assumed simply supported boundary conditions for common edges between adjacent plate elements. Elastic restraint is applied to the two loaded edges of the rectangular plate, and the relative critical buckling stress is computed according to the transcendental equations. It is found from experiments that there is no adhesive bonding failure in the elastic buckling stage. The analytical solution yields buckling stress predictions which are in reasonable agreement with measured values.  相似文献   

14.
Free vibration analysis of moderately thick rectangular FG plates on elastic foundation with various combinations of simply supported and clamped boundary conditions are studied. Winkler model is considered to describe the reaction of elastic foundation on the plate. Governing equations of motion are obtained based on the Mindlin plate theory. A semi-analytical solution is presented for the governing equations using the extended Kantorovich method together with infinite power series solution. Results are compared and validated with available results in the literature. Effects of elastic foundation, boundary conditions, material, and geometrical parameters on natural frequencies of the FG plates are investigated.  相似文献   

15.
In this study, nonlocal elasticity theory in conjunction with Gurtin–Murdoch elasticity theory is employed to investigate biaxial buckling and free vibration behavior of nanoplate made of functionally graded material (FGM) and resting on a visco-Pasternak standard linear solid-type of the foundation. The material characteristics of simply supported FGM nanoplates are assumed to be varied continuously as a power law function of the plate thickness. Hamilton’s principle is implemented to derive the non-classical governing equations of motion and related boundary conditions, which analytically solved to obtain the explicit closed-form expression for complex natural frequencies and buckling loads. Finally, attention is focused on considering the influences of various parameters on variation of damped natural frequency and buckling load ratio such as nonlocal parameter, surface effects, geometric parameters, power law index and properties of visco-Pasternak foundation and it is clearly demonstrated that these factors highly affect on vibration and buckling behavior.  相似文献   

16.
基于二维线弹性理论,应用Hamilton原理,获得Winkler-Pasternak弹性地基梁自由振动的控制微分方程,应用微分求积法(DQM)数值研究了梁自由振动的无量纲频率特性。计算结果与已有的结果(Bernoulli-Euler梁和Timoshenko梁)比较表明,本文的分析方法对弹性地基长梁和短梁自由振动的研究都有效。最后考虑了几何参数对梁频率的影响,以及不同边界条件下地基系数对频率的影响和收敛性。  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号