Theory and refined theory of elasticity for transversely isotropic plates and a new theory for tnick plates

A theory of elasticity for the bending of transversely isotropic plates has been developed from the basic equations of elasticity in terms of displacements for transversely isotropic bodies, which takes into account the loads distributed over the surfaces of the plates. Based on this theory, a refined theory of plates which can satisfy three boundary conditions along each edge of the plates and a new theory of thick plates are established. The solution of the refined theory for simply supported polygonal plates has been obtained; and its numerical result is very close to the exact solution of the three-dimensional theory of elasticity. A systematic comparison with the former theories of thick plates shows that the present theory of thick plates is closest to the result of the theory of elasticity.     

Torsion of a square isotropic plate by forces applied at the corners and by distributed torques

We consider the classical problem of the theory of elastic plates, namely, the problem on the torsion of a square isotropic plane by forces applied at the corners. The traditional solution of this problem based on the classical theory of plates and Kirchhoff and Thomson–Tait transformations is compared with the solution obtained in the improved theory of plates and with experimental results. The solution, which does not exist in the classical theory of plates, of the problem on the torsion of a plate by torques uniformly distributed over the plate contour is presented as well.     

剪切变形对FGM圆板轴对称屈曲的影响

基于一阶剪切变形板理论，推导了功能梯度材料圆形板在边界面内均布压力作用下的轴对称屈曲方程。在推导过程中，忽略了前屈曲耦合变形。利用一阶板理论与经典板理论屈曲方程之间在数学形式上的相似性，得到了一阶板理论下功能梯度材料圆板与经典板理论下均匀圆板临界屈曲载荷之间的解析关系。利用这个解析关系，可以直接从已有的较为简单的经典理论的结果，获得一阶板理论下功能梯度材料板的临界屈曲载荷。     

ON THE REFINED FIRST-ORDER SHEAR DEFORMATION PLATE THEORY OF KARMAN TYPE

ＩｎｔｒｏｄｕｃｔｉｏｎＴｈｅｕｓｅｏｆｌａｍｉｎａｔｅｄｃｏｍｐｏｓｉｔｅｓｉｎｔｈｉｎ＿ｗａｌｌｅｄｓｔｒｕｃｔｕｒｅｓｉｎｃｒｅａｓｅｓｓｏｔｈａｔｅｆｆｅｃｔｓｏｆｔｒａｎｓｖｅｒｓｅｓｈｅａｒｄｅｆｏｒｍａｔｉｏｎｓｃａｎｎｏｔｂｅｎｅｇｌｅｃｔｅｄａｎｄｉｎｖｏｋｅｑｕｉｔｅｃｏｍｐｌｅｘｅｓｉｎｎｏｎｌｉｎｅａｒａｎａｌｙｓｉｓ.Ｉｔｉｓｗｅｌｌ＿ｋｎｏｗｎｔｈａｔｔｈｅｎｏｎｌｉｎｅａｒａｎａｌｙｓｉｓｏｆｌａｍｉｎａｔｅｄｐｌａｔｅｓａｎｄｓｈｅｌｌｓｃｏｕｎｔｉｎｇｆｏｒｔｒ…     

Finite expansion of a hole in an elastic-plastic thin plate of finite thickness

A finite deformation theory for axially symmetric thin elastic-plastic plates is obtained by a consistent approximation from the corresponding three-dimensional theory. This theory can be applied to plates of finite thickness, and is different from the usual plane stress theory. The problem of the expansion of a circular hole in an infinite plate is investigated and the effect of the transversely variable stress components is studied.     

A FURTHER STUDY OF THE THEORY OF ELASTIC CIRCULAR PLATES WITH NON－KIRCHHOFF－LOVE ASSUMPTIONS

ＡＦＵＲＴＨＥＲＳＴＵＤＹＯＦＴＨＥＴＨＥＯＲＹＯＦＥＬＡＳＴＩＣＣＩＲＣＵＬＡＲＰＬＡＴＥＳＷＩＴＨＮＯＮ－ＫＩＲＣＨＨＯＦＦ－ＬＯＶＥＡＳＳＵＭＰＴＩＯＮＳＣｈｉｅｎＷｅｉ－ｚａｎｇ（钱伟长）ＲｕＸｕｅ－ｐｉｎｇ（茹学萍）（ＳｈａｎｇｈａｉＵｎｉ...     

On the refined first-order shear deformation plate theory of Kármán type

A new refined first-order shear-deformation plate theory of the Kármán type is presented for engineering applications and a new version of the generalized Kármán large deflection equations with deflection and stress functions as two unknown variables is formulated for nonlinear analysis of shear-deformable plates of composite material and construction, based on the Mindlin/Reissner theory. In this refined plate theory two rotations that are constrained out in the formulation are imposed upon overall displacements of the plates in an implicit role. Linear and nonlinear investigations may be made by the engineering theory to a class of shear-deformation plates such as moderately thick composite plates, orthotropic sandwich plates, densely stiffened plates, and laminated shear-deformable plates. Reduced forms of the generalized Kármán equations are derived consequently, which are found identical to those existe in the literature. Foundation item: the National Natural Science Foundation of China (59675027) Biography: Zhang Jianwu (1954-)     

An efficient shear deformation theory for vibration of functionally graded plates

This paper presents an efficient shear deformation theory for vibration of functionally graded plates. The theory accounts for parabolic distribution of the transverse shear strains and satisfies the zero traction boundary conditions on the surfaces of the plate without using shear correction factors. The mechanical properties of functionally graded plate are assumed to vary according to a power law distribution of the volume fraction of the constituents. Equations of motion are derived from the Hamilton??s principle. Analytical solutions of natural frequency are obtained for simply supported plates. The accuracy of the present solutions is verified by comparing the obtained results with those predicted by classical theory, first-order shear deformation theory, and higher-order shear deformation theory. It can be concluded that the present theory is not only accurate but also simple in predicting the natural frequencies of functionally graded plates.     

复合材料层合板壳非线性力学的研究进展

复合材料层合板壳是由多种组分材料组合而成.与单一材料的板壳结构相比,它无明确的材料主方向,各层间材料间断和不连续,具有明显的几何非线性和材料非线性等新的特点.其失效模式也远比单一材料的情况复杂,具有如基体开裂、脱胶、分层、分层裂纹偏转、多分层以及分层传播等多种模式.各国学者基于不同的考虑,提出了多种方法研究复合材料层合板壳的失效.首先,在简要介绍了层合板壳线性力学基本理论的基础上,重点回顾了层合板壳结构非线性力学几种基本理论发展的过程,主要阐述了经典大挠度非线性理论、一阶剪切变形理论、高阶剪切变形理论、锯齿理论、广义分层理论的理论体系及基本公式,并对几种理论之间的联系和差异进行了总结;其次,介绍了当前层合结构非线性领域的研究进展,综述了典型复合材料板壳结构的失效机理及优化设计、复合材料板壳结构在复杂环境下的破坏机理、复合材料板壳结构的物理非线性、含脱层纤维增强复合材料板壳结构的破坏机理等各研究热点的最新研究成果;最后,对该领域未来的研究方向进行了展望.     

蜂窝夹层板结构等效模型比较分析

在对蜂窝夹层板结构进行有限元分析时,要对其进行等效处理,采取等效方法的合理性将直接影响到计算结果的准确性.分别采用Reissner理论、Hoff理论、三明治夹芯板理论三种不同的等效方法建立有限元模型,然后进行了静力分析和模态分析,并将每种等效方法的计算结果与实体单元建立的蜂窝夹层板模型计算结果进行了比较.与Reissn...     

A coupled zigzag theory for the dynamics of piezoelectric hybrid cross-ply plates

A recently developed coupled third-order zigzag theory for the statics of piezoelectric hybrid cross-ply plates is extended to dynamics. The theory combines a third-order zigzag approximation for the in-plane displacements and a sub-layerwise linear approximation for the electric potential, considering all components of the electric field. The nonuniform variation of the transverse displacement due to the piezoelectric field is accounted for. The conditions for the absence of shear traction at the top and bottom surfaces and continuity of transverse shear stresses in the presence of electromechanical loading are satisfied exactly, thereby reducing the number of displacement variables to five, which is the same as in a first- or third-order equivalent single-layer theory. The governing equations of motion are derived from the extended Hamilton's principle. The theory is assessed by comparing the Navier solutions for the free and forced harmonic vibration response of simply supported plates with the exact three-dimensional piezoelasticity solutions. Comparisons for hybrid test, composite and sandwich plates establish that the present theory is quite accurate for the dynamic response of moderately thick plates.     

Response of circular clamped plates to square-wave stress pulses

An account is given of an experimental investigation of the reeponse of clamped circular mild-steel plates of various thicknesses subjected to rectangular stress pulses over a small circular region. The stress pulses were transmitted to the plates through a 1/2-in.-diam shock bar and the strain-time responses of the plates were measured. The stress-wave interactions between the bar and the plates were measured for a number of thicknesses and the effect of the applied stress on the extent of the plastic deformation was determined. It was found that the elastic response was accurately predicted by the theory of Sneddon and the plastic response behaved according to a simple modification of this theory. The interaction between the stress pulse and plates of various thickness was theoretically predicted and found to be in excellent agreement with experimental measurements. The final plate deflections were theoretically predicted using a rigid viscoplastic theory and was in substantial agreement with the data. From this theory, the data were analyzed to determine the visco-plastic constant or relaxation time of the material. It is proposed that this testing arrangement is a suitable and convenient method for determining dynamic yield properties under biaxial-loading conditions.     

A new simple third-order shear deformation theory of plates

An improved simple third-order shear deformation theory for the analysis of shear flexible plates is presented in this paper. This new plate theory is composed of three parts: the simple third-order kinematics of displacements reduced from the higher-order displacement field derived previously by the author; a system of 10th-order differential equilibrium equations in terms of the three generalized displacements of bending plates; five boundary conditions at each edge of plate boundaries. Although the resulting displacement field is the same as that proposed by Murthy, the variational consistent governing equations and the associated proper boundary conditions are derived and identified in this work for the first time in the literature. The applications and accuracy of the present shear deformation theory of plates are demonstrated by analytically solving the differential governing equations of a twisting plate, a bending beam and two bending plates to which the 3-D elasticity solutions are available, and excellent agreements are achieved even for the torsion of a plate with square cross-section as well the local effects of stresses at plate boundaries can be characterized accurately. These analytical solutions clearly show that the simple third-order shear deformation theory developed in this work indeed gives better results than the first-order shear deformation theories and other simple higher-order shear deformation theories, since the present third-order shear flexible theory is based on a more rigorous kinematics of displacements and consists of not only a system of variational consistent differential equations, but also a group of consistent boundary conditions associated with the differential equations. The present simple third-order shear deformation theory can easily be applied to the static and dynamic finite element analysis of laminated plates just like the applications of other popular shear flexible plate theories, and improved results could be obtained from the present simple third-order shear deformable theories of plates.     

矩形板非线性蠕变损伤屈曲特性分析

基于Von Karman非线性板理论和Kachanov-Rabotnov损伤理论,建立了在横向和面内载荷共同作用下考虑蠕变损伤效应的矩形板的非线性控制平衡方程,采用有限差分法和时间增量算法对未知变量进行离散,对整个问题进行迭代求解,分析了几何非线性、荷载等因素对板非线性蠕变损伤特性的影响。     

Free vibration of functionally graded sandwich plates using four-variable refined plate theory

This paper uses the four-variable refined plate theory (RPT) for the free vibration analysis of functionally graded material (FGM) sandwich rectangular plates.Unlike other theories, there are only four unknown functions involved, as compared to five in other shear deformation theories. The theory presented is variationally consistent and strongly similar to the classical plate theory in many aspects. It does not require the shear correction factor, and gives rise to the transverse shear stress variation so that the transverse shear stresses vary parabolically across the thickness to satisfy free surface conditions for the shear stress. Two common types of FGM sandwich plates are considered, namely, the sandwich with the FGM facesheet and the homogeneous core and the sandwich with the homogeneous facesheet and the FGM core. The equation of motion for the FGM sandwich plates is obtained based on Hamilton's principle. The closed form solutions are obtained by using the Navier technique. The fundamental frequencies are found by solving the eigenvalue problems. The validity of the theory is shown by comparing the present results with those of the classical, the first-order, and the other higher-ordex theories. The proposed theory is accurate and simple in solving the free vibration behavior of the FGM sandwich plates.     

Axisymmetric bending analysis of thick functionally graded circular plates using fourth-order shear deformation theory

In the present article, axisymmetric bending and stretching of functionally graded (FG) circular plates subjected to uniform transverse loading based on fourth-order shear deformation plate theory (FOST) have been studied. Using a fourth-order shear deformation theory, the solutions for deflection and rotation functions of FG plates are presented in terms of the corresponding quantities for a homogeneous plate using the classical plate theory (CPT), from which solutions one can easily obtain the FOST solutions for axisymmetric bending of FG circular plates. It is assumed that the effective mechanical properties of the functionally graded plates through the thickness are continuous functions of the volume fractions of the constituent parts which are themselves defined by a power-law function. Numerical results for maximum deflection and shear stress are presented for various percentages of ceramic–metal volume fractions. These results are also compared with those obtained from the first-order shear deformation plate theory of Mindlin (FST), the third-order shear deformation plate theory of Reddy (TST) as well as the exact three-dimensional elasticity solution. It is found that although the maximum deflections obtained using FOST and TST are close to each other, the through-thickness shear stress is predicted more accurately by the FOST formulation than by the TST.     

Free vibration of functionally graded sandwich plates using four-variable refined plate theory

This paper uses the four-variable refined plate theory (RPT) for the free vibration analysis of functionally graded material (FGM) sandwich rectangular plates. Unlike other theories, there are only four unknown functions involved, as compared to five in other shear deformation theories. The theory presented is variationally consistent and strongly similar to the classical plate theory in many aspects. It does not require the shear correction factor, and gives rise to the transverse shear stress variation so that the transverse shear stresses vary parabolically across the thickness to satisfy free surface conditions for the shear stress. Two common types of FGM sandwich plates are considered, namely, the sandwich with the FGM facesheet and the homogeneous core and the sandwich with the homogeneous facesheet and the FGM core. The equation of motion for the FGM sandwich plates is obtained based on Hamilton’s principle. The closed form solutions are obtained by using the Navier technique. The fundamental frequencies are found by solving the eigenvalue problems. The validity of the theory is shown by comparing the present results with those of the classical, the first-order, and the other higher-order theories. The proposed theory is accurate and simple in solving the free vibration behavior of the FGM sandwich plates.     

考虑剪切效应层合板的Hamilton体系及辛几何方法

基于ＹＮＳ层合板理论,通过对混合能变分原理的修正,建立了层合板问题的Ｈａｍｉｌｔｏｎ正则方程。在辛几何数学框架下,采用共轭辛正交归一关系给出精确解。并与经典层板理论进行了比较。     

A nonlinear composite plate theory

A general nonlinear theory for the dynamics of elastic anisotropic plates undergoing moderate-rotation vibrations is presented. The theory fully accounts for geometric nonlinearities (moderate rotations and displacements) by using local stress and strain measures and an exact coordinate transformation, which result in nonlinear curvatures and strain-displacement expressions that contain the von Karman strains as a special case. The theory accounts for transverse shear deformations by using a third-order theory and for extensionality and changes in the configuration due to in-plane and transverse deformations. Five third-order nonlinear partial-differential equations of motion describing the extension-extension-bending-shear-shear vibrations of plates are obtained by an asymptotic analysis, which reveals that laminated plates display linear elastic and nonlinear geometric couplings among all motions.     

On the microdynamics of composite plates

Summary The subject of the contribution is an investigation of elastic composite plates with a microperiodic structure along the plate's midsurface. The computational models of the plates are largely based on the homogenization procedures leading to equations with constant coefficients. However, the homogenization theories neglect the microstructure length-scale effect on the plate's dynamic behaviour. The objective of this research is to formulate and investigate a refined theory of the composite plates under consideration, which would describe the microdynamic plate behaviour caused by the microstructure. The possible applications of the proposed theory are shown by an example.This research was partly supported by KBN, Warsaw, under grant 3 3310 92 03.