A simulation-based study on longitudinal gust response of flexible flapping wings

Winged animals such as insects are capable of flying and surviving in an unsteady and unpredictable aerial environment. They generate and control aerodynamic forces by flapping their flexible wings. While the dynamic shape changes of their flapping wings are known to enhance the efficiency of their flight, they can also affect the stability of a flapping wing flyer under unpredictable disturbances by responding to the sudden changes of aerodynamic forces on the wing. In order to test the hypothesis, the gust response of flexible flapping wings is investigated numerically with a specific focus on the passive maintenance of aerodynamic forces by the wing flexibility. The computational model is based on a dynamic flight simulator that can incorporate the realistic morphology, the kinematics, the structural dynamics, the aerodynamics and the fluid–structure interactions of a hovering hawkmoth. The longitudinal gusts are imposed against the tethered model of a hovering hawkmoth with flexible flapping wings. It is found that the aerodynamic forces on the flapping wings are affected by the gust, because of the increase or decrease in relative wingtip velocity or kinematic angle of attack. The passive shape change of flexible wings can, however, reduce the changes in the magnitude and direction of aerodynamic forces by the gusts from various directions, except for the downward gust. Such adaptive response of the flexible structure to stabilise the attitude can be classified into the mechanical feedback, which works passively with minimal delay, and is of great importance to the design of bio-inspired flapping wings for micro-air vehicles.     

关于飞行和游动的生物力学研究

论述了飞行和游动生物力学的任务和意义,以及重大科学问题和与仿生技术相关的重大需求,并概要地介绍了与生物外部流体力学有关的科学问题、研究现状以及我国现有的研究基础和特色.文中针对如下若干重点科学问题进行了论述,具体包括Gray疑题及鱼类阻力的测定问题、鱼类机动运动的特征和机理、鱼类游动的流-固耦合及整体模化等交叉问题、昆虫运动的非定常流动控制机理和能耗、昆虫翼的柔性变形效应及抗风机制、昆虫和鱼的自由运动的运动学和动力学测量.图0参72      

Aerodynamic calculation of normal hovering flight

The theory of a lifting surface is used to construct a model of three-dimensional unsteady flow past a pair of flapping wings in the regime of normal hovering flight. A numerical method is used to make an aero-dynamic calculation of the wings and find kinematics generating a lift sufficient for the flight of an insect.     

Aeroelastic study of flexible flapping wings by a coupled lattice Boltzmann-finite element approach with immersed boundary method

In this paper, the behavior of two-dimensional symmetric flapping wings moving in a viscous fluid is investigated. Harmonic motion is applied to idealize flying organisms with flexible wings and extensive testing is carried out to investigate the resultant flight behavior related to the ability to take-off or accelerate the flapping wing system away from a starting location. Special attention is paid to analyze the effect of the main mechanical parameters, as well as the effect of lateral wind on flight performances. Moreover, aiming to investigate the possible benefits of flying in flocks, a couple of synchronously flapping wings is considered in addition to the single arrangement. The numerical simulations are performed by solving the fluid–structure interaction problem through a strongly coupled partitioned approach. Fluid dynamics are modeled at the mesoscopic scale by the lattice Boltzmann method. The resulting macroscopic quantities are derived, as usual, based on the statistical molecular-level interpretation.Wings are modeled by geometrically nonlinear, elastic beam finite elements and structure dynamics is solved by the time discontinuous Galerkin method. Fluid–structure interface conditions are handled using the immersed boundary method. The resultant numerical approach combines simplicity and high computational efficiency. A Monte Carlo simulation strategy is employed to characterize the flight behavior subjected to lateral wind. Various scenarios are discussed.     

Influence of wing flexibility on the aerodynamic performance of a tethered flapping bumblebee

The sophisticated structures of flapping insect wings make it challenging to study the role of wing flexibility in insect flight. In this study, a mass-spring system is used to model wing structural dynamics as a thin, flexible membrane supported by a network of veins. The vein mechanical properties can be estimated based on their diameters and the Young's modulus of cuticle. In order to analyze the effect of wing flexibility, the Young's modulus is varied to make a comparison between two different wing models that we refer to as flexible and highly flexible. The wing models are coupled with a pseudo-spectral code solving the incompressible Navier–Stokes equations, allowing us to investigate the influence of wing deformation on the aerodynamic efficiency of a tethered flapping bumblebee. Compared to the bumblebee model with rigid wings, the one with flexible wings flies more efficiently, characterized by a larger lift-to-power ratio.     

Experimental investigation of the effect of chordwise flexibility on the aerodynamics of flapping wings in hovering flight

Ornithopters or mechanical birds produce aerodynamic lift and thrust through the flapping motion of their wings. Here, we use an experimental apparatus to investigate the effects of a wing's twisting stiffness on the generated thrust force and the power required at different flapping frequencies. A flapping wing system and an experimental set-up were designed to measure the unsteady aerodynamic and inertial forces, power usage and angular speed of the flapping wing motion. A data acquisition system was set-up to record important data with the appropriate sampling frequency. The aerodynamic performance of the vehicle under hovering (i.e., no wind) conditions was investigated. The lift and thrust that were produced were measured for different flapping frequencies and for various wings with different chordwise flexibilities. The results show the manner in which the elastic deformation and inertial flapping forces affect the dynamical behavior of the wing. It is shown that the generalization of the actuator disk theory is, at most, only valid for rigid wings, and for flexible wings, the power P varies by a power of about 1.0  of the thrust T. This aerodynamic information can also be used as benchmark data for unsteady flow solvers.     

Experimental study on interaction of aerodynamics with flexible wings of flapping vehicles in hovering and cruise flight

Flapping wings are promising lift and thrust generators, especially for very low Reynolds numbers. To investigate aeroelastic effects of flexible wings (specifically, wing’s twisting stiffness) on hovering and cruising aerodynamic performance, a flapping-wing system and an experimental setup were designed and built. This system measures the unsteady aerodynamic and inertial forces, power usage, and angular speed of the flapping wing motion for different flapping frequencies and for various wings with different chordwise flexibility. Aerodynamic performance of the vehicle for both no wind (hovering) and cruise condition was investigated. Results show how elastic deformations caused by interaction of inertial and aerodynamic forces with the flexible structure may affect specific power consumption. This information was used here to find a more suitable structural design. The best selected design in our tests performs up to 30% better than others (i.e., less energy consumption for the same lift or thrust generation). This measured aerodynamic information could also be used as a benchmarking data for unsteady flow solvers.     

Correlation between vortex structures and unsteady loads for flapping motion in hover

During the past decade, efforts were made to develop a new generation of unmanned aircrafts, qualified as Micro-Air Vehicles. The particularity of these systems resides in their maximum dimension limited to 15 cm, which, in terms of aerodynamics, corresponds to low Reynolds number flows (Re ≈ 10² to 10⁴). At low Reynolds number, the concept of flapping wings seems to be an interesting alternative to the conventional fixed and rotary wings. Despite the fact that this concept may lead to enhanced lift forces and efficiency ratios, it allows hovering coupled with a low-noise generation. Previous studies (Dickinson et al. in Science 284:1954–1960, 1999) revealed that the flow engendered by flapping wings is highly vortical and unsteady, inducing significant temporal variations of the loads experienced by the airfoil. In order to enhance the aerodynamic performance of such flapping wings, it is essential to give further insight into the loads generating mechanisms by correlating the spatial and temporal evolution of the vortical structures together with the time-dependent lift and drag. In this paper, Time Resolved Particle Image Velocimetry is used as a basis to evaluate both unsteady forces and vortical structures generated by an airfoil undergoing complex motion (i.e. asymmetric flapping flight), through the momentum equation approach and a multidimensional wavelet-like vortex parameterization method, respectively. The momentum equation approach relies on the integration of flow variables inside and around a control volume surrounding the airfoil (Noca et al. in J Fluids Struct 11:345–350, 1997; Unal et al. in J Fluids Struct 11:965–971, 1997). Besides the direct link performed between the flow behavior and the force mechanisms, the load characterization is here non-intrusive and specifically convenient for flapping flight studies thanks to its low Reynolds flows’ sensitivity and adaptability to moving bodies. Results are supported by a vortex parameterization which evaluates the circulation of the multiple vortices generated in such complex flows. The temporal evolution of the loads matches the flow behavior and hence reveals the preponderant inertial force component and that due to vortical structures.     

Numerical simulation of flapping‐wing insect hovering flight at unsteady flow

A computational fluid dynamics (CFD) analysis was conducted to study the unsteady aerodynamics of a virtual flying bumblebee during hovering flight. The integrated geometry of bumblebee was established to define the shape of a three‐dimensional virtual bumblebee model with beating its wings, accurately mimicking the three‐dimensional movements of wings during hovering flight. The kinematics data of wings documented from the measurement to the bumblebee in normal hovering flight aided by the high‐speed video. The Navier–Stokes equations are solved numerically. The solution provides the flow and pressure fields, from which the aerodynamic forces and vorticity wake structure are obtained. Insights into the unsteady aerodynamic force generation process are gained from the force and flow‐structure information. The CFD analysis has established an overall understanding of the viscous and unsteady flow around the virtual flying bumblebee and of the time course of instantaneous force production, which reveals that hovering flight is dominated by the unsteady aerodynamics of both the instantaneous dynamics and also the past history of the wing. A coherent leading‐edge vortex with axial flow and the attached wingtip vortex and trailing edge vortex were detected. The leading edge vortex, wing tip vortex and trailing edge vortex, which caused by the pressure difference between the upper and the lower surface of wings. The axial flow, which include the spanwise flow and chordwise flow, is derived from the spanwise pressure gradient and chordwise pressure gradient, will stabilize the vortex and gives it a characteristic spiral conical shape. Copyright © 2006 John Wiley & Sons, Ltd.     

Characterization of vortical structures and loads based on time-resolved PIV for asymmetric hovering flapping flight

Flight agility, resistance to gusts, capability to hover coupled with a low noise generation might have been some of the reasons why insects are among the oldest species observed in nature. Biologists and aerodynamicists focused on analyzing such flight performances for diverse purposes: understanding the essence of flapping wings aerodynamics and applying this wing concept to the development of micro-air vehicles (MAVs). In order to put into evidence the fundamentally non-linear unsteady mechanisms responsible for the amount of lift generated by a flapping wing (Dickinson et al. in Science 284:1954–1960, 1999), experimental and numerical studies were carried out on typical insect model wings and kinematics. On the other hand, in the recent context of MAVs development, it is of particular interest to study simplified non-biological flapping configurations which could lead to lift and/or efficiency enhancement. In this paper, we propose a parametrical study of a NACA0012 profile undergoing asymmetric hovering flapping motions at Reynolds 1000. On the contrary to normal hovering, which has been widely studied as being the most common configuration observed in the world of insects, asymmetric hovering is characterized by an inclined stroke plane. Besides the fact that the vertical force is hence a combination of both lift and drag (Wang in J Exp Biol 207:1137–1150, 2004), the specificity of such motions resides in the vortex dynamics which present distinct behaviours, whether the upstroke angle of attack leads to a partially attached or a strong separated flow, giving more or less importance to the wake capture phenomenon. A direct consequence of the previous remarks relies on the enhancement of aerodynamic efficiency with asymmetry. If several studies reported results based on the asymmetric flapping motion of dragonfly, only few works concentrated on parametrizing asymmetric motions (e.g. Wang in Phys Rev Lett 85:2216–2219, 2000). The present study relies on TR-PIV measurements which allow determination of the vorticity fields and provide a basis to evaluate the resulting unsteady forces through the momemtum equation approach.     

Interaction of gap flow with flapping dynamics of two side-by-side elastic foils

Two side-by-side elastic foils placed in an axial flow with the leading edges clamped lose their stability to exhibit in-phase or out-of-phase modes due to the proximity induced effects. Of particular, the passive out-of-phase flapping mode typically represents the clapping mechanism exhibited by biological organisms such as jellyfish and squid for swimming via jet propulsion. An impact of the viscous gap-flow dynamics on such passive flapping modes and vice versa is not well understood for the side-by-side elastic foil system. In the present work, we explore the mutual interaction of two side-by-side elastic foils performing flapping motion with the viscous gap-flow via a high-order finite element based fluid-elastic formulation with an exact tracking of fluid-foil interface. We show that the gap-flow exhibits pulsating flow with higher net drag for the passive out-of-phase coupled mode compared to the in-phase flapping where it exhibits uniform flow rate. Three distinct gap-flow velocity patterns are identified as functions of the coupled flapping modes: (i) unsteady symmetrical gap-flow with variable gap for the out-of-phase, (ii) unsteady alternating biased asymmetrical gap-flow with a uniform gap for the in-phase, and (iii) unsteady alternating biased asymmetrical gap-flow with variable gap for the mixed in-phase and out-of-phase. We examine the role of the gap-flow on the coupled fluid-elastic instability and the passive flapping modes. Two side-by-side elastic foils can experience significantly lower drag compared to their single foil counterpart and the two side-by-side rigid foils by undergoing static outward deformation. We utilize this phenomenon to understand the greater propensity of the flapping instability of the two side-by-side elastic foils in contrast to their single foil counterpart. We show that the coupled system does not exhibit the out-of-phase flapping if there is no gap-flow between the foils. We also find that two elastic foils when placed in proximity to each other always lose their stability to exhibit the out-of-phase coupling irrespective of whether the fully developed flapping exhibits in-phase or the out-of-phase flapping. The transition from the initial out-of-phase to the in-phase flapping is characterized by the loss of symmetry in the jet-like gap flow at the exit area of the side-by-side foils.     

Accurate measurement of streamwise vortices using dual-plane PIV

Low Reynolds number aerodynamic experiments with flapping animals (such as bats and small birds) are of particular interest due to their application to micro air vehicles which operate in a similar parameter space. Previous PIV wake measurements described the structures left by bats and birds and provided insight into the time history of their aerodynamic force generation; however, these studies have faced difficulty drawing quantitative conclusions based on said measurements. The highly three-dimensional and unsteady nature of the flows associated with flapping flight are major challenges for accurate measurements. The challenge of animal flight measurements is finding small flow features in a large field of view at high speed with limited laser energy and camera resolution. Cross-stream measurement is further complicated by the predominately out-of-plane flow that requires thick laser sheets and short inter-frame times, which increase noise and measurement uncertainty. Choosing appropriate experimental parameters requires compromise between the spatial and temporal resolution and the dynamic range of the measurement. To explore these challenges, we do a case study on the wake of a fixed wing. The fixed model simplifies the experiment and allows direct measurements of the aerodynamic forces via load cell. We present a detailed analysis of the wake measurements, discuss the criteria for making accurate measurements, and present a solution for making quantitative aerodynamic load measurements behind free-flyers.     

NUMERICAL SIMULATION OF INSECT FLIGHT

In the non-inertial coordinates attached to the model wing, the two-dimensional unsteady flow field triggered by the motion of the model wing, similar to the flapping of the insect wings, was numerically simulated. One of the advantages of our method is that it has avoided the difficulty related to the moving-boundary problem. Another advantage is that the model has three degrees of freedom and can be used to simulate arbitrary motions of a two-dimensional wing in plane only if the motion is known. Such flexibility allows us to study how insects control their flying. Our results show that there are two parameters that are possibly utilized by insects to control their flight: the phase difference between the wing translation and rotation, and the lateral amplitude of flapping along the direction perpendicular to the average flapping plane.     

Reduced coupled flapping wing-fluid computational model with unsteady vortex wake

Insect flight research is propelled by their unmatched flight capabilities. However, complex underlying aerodynamic phenomena make computational modeling of insect-type flapping flight a challenging task, limiting our ability in understanding insect flight and producing aerial vehicles exploiting same aerodynamic phenomena. To this end, novel mid-fidelity approach to modeling insect-type flapping vehicles is proposed. The approach is computationally efficient enough to be used within optimal design and optimal control loops, while not requiring experimental data for fitting model parameters, as opposed to widely used quasi-steady aerodynamic models. The proposed algorithm is based on Helmholtz–Hodge decomposition of fluid velocity into curl-free and divergence-free parts. Curl-free flow is used to accurately model added inertia effects (in almost exact manner), while expressing system dynamics by using wing variables only, after employing symplectic reduction of the coupled wing-fluid system at zero level of vorticity (thus reducing out fluid variables in the process). To this end, all terms in the coupled body-fluid system equations of motion are taken into account, including often neglected terms related to the changing nature of the added inertia matrix (opposed to the constant nature of rigid body mass and inertia matrix). On the other hand—in order to model flapping wing system vorticity effects—divergence-free part of the flow is modeled by a wake of point vortices shed from both leading (characteristic for insect flight) and trailing wing edges. The approach is evaluated for a numerical case involving fruit fly hovering, while quasi-steady aerodynamic model is used as benchmark tool with experimentally validated parameters for the selected test case. The results indicate that the proposed approach is capable of mid-fidelity accurate calculation of aerodynamic loads on the insect-type flapping wings.

     

Design and development considerations for biologically inspired flapping-wing micro air vehicles

In this paper, the decade of numerical and experimental investigations leading to the development of the authors’ unique flapping-wing micro air vehicle is summarized. Early investigations included the study of boundary layer energization by means of a small flapping foil embedded in a flat-plate boundary layer, the reduction of the recirculatory flow region behind a backward-facing step by means of a small flapping foil, and the reduction or suppression of flow separation behind blunt or cusped airfoil trailing edges by flapping a small foil located in the wake flow region. These studies were followed by systematic investigations of the aerodynamic characteristics of single flapping airfoils and airfoil combinations. These unsteady flows were described using flow visualization, laser-Doppler velocimetry in addition to panel and Navier–Stokes computations. It is then shown how this flapping-wing database was used to conceive, design and develop a micro air vehicle which has a fixed wing for lift and two flapping wings for thrust generation. While animal flight is characterized by a coupled force generation, the present design appears to separate lift and thrust. However, in fact, the performance of one surface is closely coupled to the other surfaces.     

Aerodynamic and functional consequences of wing compliance

A growing body of evidence indicates that a majority of insects experience some degree of wing deformation during flight. With no musculature distal to the wing base, the instantaneous shape of an insect wing is dictated by the interaction of aerodynamic forces with the inertial and elastic forces that arise from periodic accelerations of the wing. Passive wing deformation is an unavoidable feature of flapping flight for many insects due to the inertial loads that accompany rapid stroke reversals—loads that well exceed the mean aerodynamic force. Although wing compliance has been implicated in a few lift-enhancing mechanisms (e.g., favorable camber), the direct aerodynamic consequences of wing deformation remain generally unresolved. In this paper, we present new experimental data on how wing compliance may affect the overall induced flow in the hawkmoth, Manduca sexta. Real moth wings were subjected to robotic actuation in their dominant plane of rotation at a natural wing beat frequency of 25 Hz. We used digital particle image velocimetry at exceptionally high temporal resolution (2,100 fps) to assess the influence of wing compliance on the mean advective flows, relying on a natural variation in wing stiffness to alter the amount of emergent deformation (freshly extracted wings are flexible and exhibit greater compliance than those that are desiccated). We find that flexible wings yield mean advective flows with substantially greater magnitudes and orientations more beneficial to lift than those of stiff wings. Our results confirm that wing compliance plays a critical role in the production of flight forces. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Falling cards and flapping flags: understanding fluid–solid interactions using an unsteady point vortex model

A reduced-order model for the two-dimensional interaction of a sharp-edged solid body and a high-Reynolds number flow is presented, based on the inviscid representation of the solid’s wake as point vortices with unsteady intensity. This model is applied to the fall of a rigid card in a fluid and to the flapping instability of a flexible membrane forced by a parallel flow.     

一种平行曲柄连杆扑翼机构的设计、优化与实现

提出了一种来自于昆虫结构启发的平 行曲柄连杆的扑翼机构. 该机构依靠两组平行布置的曲 柄连杆和连杆间的翼面控制机构实现, 既能够保证扑翼运动左右翼面的对称性, 又能够实现挥拍 攻角的调节和控制, 采用MATLAB的非线性优化工具对该扑翼机构进行了运动参数的 优化, 并设计制作了大比例的实物扑翼模型进行测力分析. 结果验证了这种扑 翼机构能够给出非定常高升力.