SCATTERING OF HARMONIC ANTI-PLANE SHEAR STRESS WAVES BY A CRACK IN FUNCTIONALLY GRADED PIEZOELECTRIC/PIEZOMAGNETIC MATERIALS

In this paper, the dynamic behavior of a permeable crack in functionally graded piezoelectric/piezomagnetic materials is investigated. To make the analysis tractable, it is assumed that the material properties vary exponentially with the coordinate parallel to the crack. By using the Fourier transform, the problem can be solved with the help of a pair of dual integral equations in which the unknown is the jump of displacements across the crack surfaces. These equations are solved to obtain the relations between the electric filed, the magnetic flux field and the dynamic stress field near the crack tips using the Schmidt method. Numerical examples are provided to show the effect of the functionally graded parameter and the circular frequency of the incident waves upon the stress, the electric displacement and the magnetic flux intensity factors of the crack.     

Tunability of Band Gaps in Two-Dimensional Phononic Crystals with Magnetorheological and Electrorheological Composites

The elastic wave propagation properties of phononic crystals(PnCs)composed of an elastic matrix embedded in magnetorheological and electrorheological elastomers are studied in this paper.The tunable band gaps and transmission spectra of these materials are calculated using the finite element method and supercell technology.The variations in the band gap characteristics with changes in the electric/magnetic fields are given.The numerical results show that the electric and magnetic fields can be used in combination to adjust the band gaps effectively.The start and stop frequencies of the band gap are obviously affected by the electric field,and the band gap width is regulated more significantly by the magnetic field.The widest and highest band gap can be obtained by combined application of the electric and magnetic fields.In addition,the band gaps can be moved to the low-frequency region by drilling holes in the PnC,which can also open or close new band gaps.These results indicate the possibility of multi-physical field regulation and design optimization of the elastic wave properties of intelligent PnCs.     

MULTIPLE PARALLEL SYMMETRIC PERMEABLE MODEL-Ⅲ CRACKS IN A PIEZOELECTRIC/PIEZOMAGNETIC COMPOSITE MATERIAL PLANE

In this paper, the interactions of multiple parallel symmetric and permeable finite length cracks in a piezoelectric/piezomagnetic material plane subjected to anti-plane shear stress loading are studied by the Schmidt method.The problem is formulated through Fourier transform into dual integral equations, in which the unknown variables are the displacement jumps across the crack surfaces.To solve the dual integral equations, the displacement jumps across the crack surfaces are directly expanded as a series of Jacobi polynomials.Finally, the relation between the electric field, the magnetic flux field and the stress field near the crack tips is obtained.The results show that the stress, the electric displacement and the magnetic flux intensity factors at the crack tips depend on the length and spacing of the cracks.It is also revealed that the crack shielding effect presents in piezoelectric/piezomagnetic materials.     

Investigation of the crack problem in non-local piezoelectric materials under combined electromechanical loadings

The present investigation of the crack problem in piezoelectric materials is performed based on the non-local theory. After some manipulations, the impermeable crack, the permeable crack （the crack gap is full of NaCI solution）, and the semi-permeable crack （the crack gap is full of air or silicon oil） are reduced to a uniform formulation by assuming the normal electric displacement on the crack surfaces to be an unknown variable. Thus, a triple integral equation with the unknown normal electric displacement is established. By using the Newton iterative method and solving the triple integral equation, it is found that the normal electric displacement on the crack surfaces is no longer a constant as determined by previous studies, rather, it depends upon the remote combined electromechanical loadings. Numerical results of the stresses and electric displacement fields show that there are no singularities at the crack tips so that the stresses remain finite. It is of great significance that the concrete electric boundary condition on the crack surfaces exerts significant influence on the near-tip fields and in this way plays an important role in evaluating the crack stability in the non-local piezoelectric materials. More specifically, the impermeable crack model always overestimates the finite stresses at the crack tips, whereas the permeable crack model always underestimates them.     

HEAT TRANSFER CHARACTERISTICS OF CONDUCTIVE MATERIAL UNDER INNER NON-UNIFORM ELECTROMAGNETIC FIELDS

Electronic transport properties can be influenced by the applied electromagnetic fields in conductive materials. The change of the electron distribution function evoked by outfields obeys the Boltzmann equation. In this paper, a general law of heat conduction considering the non-uniform electromagnetic effect is developed from the Boltzmann equation. An analysis of the equation leads to the result that the electric field gradient and the magnetic gradient in the conductive material are responsible for the influences of electromagnetic fields on the heat conduction process. A physical model is established and finite element numerical simulation reveals that heat conduction can be increased or delayed by the different directions of the electric field gradient, and the existence of the magnetic gradient always hinders heat conduction.     

A NOVEL METHOD FOR EXACT SOLUTIONS OF ELLIPTICAL CRACKS IN PIEZOELECTRICS

According to the constitutive relationship in linear piezoceramics, elliptical crack problems in the impermeable case are reconsidered with the hypersingular integral equation method. Unknown displacement and electric potential jumps in the integral equations are approximated with a product of the fundamental density function and polynomials, in which the fundamental density function reflects the singular behavior of electroelastic fields near the crack front and the polynomials can be reduced to a real constant under uniform loading. Ellipsoidal coordinates are cleverly introduced to solve the unknown displacement and electric potential jumps in the integral equations under uniform loading. With the help of these solutions and definitions of electroelastic field intensity factors, exact expressions for mode Ⅰ, mode Ⅱ and mode Ⅲ stress intensity factors as well as the mode Ⅳ electric displacement intensity factor are obtained. The present results under uniform normal loading are the same as the available exact solutions, but those under uniform shear loading have not been found in the literature as yet.     

Thermoelastic analysis of multiple defects with the extended finite element method

In this paper, the extended finite element method (XFEM) is adopted to analyze the interaction between a sin-gle macroscopic inclusion and a single macroscopic crack as well as that between multiple macroscopic or micro-scopic defects under thermal/mechanical load. The effects of different shapes of multiple inclusions on the material thermomechanical response are investigated, and the level set method is coupled with XFEM to analyze the interaction of multiple defects. Further, the discretized extended finite element approximations in relation to thermoelastic prob-lems of multiple defects under displacement or temperature field are given. Also, the interfaces of cracks or materials are represented by level set functions, which allow the mesh assignment not to conform to crack or material interfaces. Moreover, stress intensity factors of cracks are obtained by the interaction integral method or the M-integral method, and the stress/strain/stiffness fields are simulated in the case of multiple cracks or multiple inclusions. Finally, some numer-ical examples are provided to demonstrate the accuracy of our proposed method.     

EXPERIMENTAL RESEARCHES ON MAGNETO-THERMO-MECHANICAL CHARACTERIZATION OF TERFENOL-D

The coupling effects of axial pre-stress,temperature and magnetic field on magne- tostrictive strain and magnetization as well as Young's modulus of a Terfenol-D (Tb_(0.3)Dy_(0.7)Fe_(1.93)) rod are tested to give a good understanding of magneto-thermal-mecha-nical characteristics of giant magnetostrictive materials.Results show that magneto-thermo-mechanical coupling of gi- ant magnetostrictive materials is very strong;and the influences of pre-stress and temperature on magnetostrictive strain and Young's modulus vary with the intensity of magnetic field.     

INVESTIGATION OF BEHAVIOR OF MODE-Ⅰ INTERFACE CRACK IN PIEZOELECTRIC MATERIALS BY USING SCHMIDT METHOD

The behavior of a Mode-Ⅰ interface crack in piezoelectric materials was investigated under the assumptions that the effect of the crack surface overlapping very near the crack tips was negligible. By use of the Fourier transform, the problem can be solved with the help of two pairs of dual integral equations. To solve the dual integral equations, the jumps of the displacements across the crack surfaces were expanded in a series of Jacobi polynomials. It is found that the stress and the electric displacement singularities of the present interface crack solution are the same as ones of the ordinary crack in homogenous materials. The solution of the present paper can be returned to the exact solution when the upper half plane material is the same as the lower half plane material.     

Basic solution of two parallel non-symmetric permeable cracks in piezoelectric materials

The behavior of two parallel non-symmetric cracks in piezoelectric materials subjected to the anti-plane shear loading was studied by the Schmidt method for the permeable crack electric boundary conditions. Through the Fourier transform, the present problem can be solved with two pairs of dual integral equations ip which the unknown variables are the jumps of displacements across crack surfaces. To solve the dual integral equations, the jumps of displacements across crack surfaces were directly expanded in a series of Jacobi polynomials. Finally, the relations between electric displacement intensity factors and stress intensity factors at crack tips can be obtained. Numerical examples are provided to show the effect of the distance between two cracks upon stress and electric displacement intensity factors at crack tips. Contrary to the impermeable crack surface condition solution, it is found that electric displacement intensity factors for the permeable crack surface conditions are much smaller than those for the impermeable crack surface conditions. At the same time, it can be found that the crack shielding effect is also present in the piezoelectric materials.     

Exact solution for elliptical inclusion in magnetoelectroelastic materials

This paper considers the magneto-electro-mechanical coupling between an inclusion and matrix, which are both of magnetoelectroelastic materials. The general cases including the mode I, mode II and mode III are studied. Analytical solutions for an elliptical cylinder inclusion inside an infinite magnetoelectroelastic medium under combined mechanical–electrical–magnetic loadings are formulated via the Stroh formalism. Crack problem is also investigated and the stress, electric and magnetic fields in the vicinity of the crack tip are determined by a complex vector of intensity factors. Various special cases, including an impermeable inclusion, a permeable crack, a rigid and permeable inclusion, a rigid and permeable line inclusion, a permeable cavity, and an impermeable cavity are discussed.     

压电材料中的Bueckner功共轭积分及和J积分M积分的关系

研究横观各向同性压电材料中裂纹问题,提出了Bueckner功共轭积分在这类材料中的表达式：并通过引出两类辅助的应力-位移-电位移-电势场,证明功共轭积分和这类材料中的J积分和M积分仍然存在简单的两倍关系由此,各类在脆性材料断裂问题中已广泛应用的权函数方法可顺理成章地推广到压电材料的研究中来．这对独立地确定电位移强度因子和经典的I、II型应力强度因子提供了有力的数学上的工具．进而通过计算机械应变能释放率对压电材料中裂纹的稳定做出判断．     

Fracture mechanics for a mode III crack in a magnetoelectroelastic solid

In this paper, we developed a Stroh-type formalism for anti-plane deformation and then investigated the fracture mechanics for an elliptical cavity in a magnetoelectroelastic solid under remotely uniform in-plane electromagnetic and/or anti-plane mechanical loading, which allowed us to take the electromagnetic field inside the cavity into account. Reducing the cavity into a crack, we had explicit solutions in closed forms for a mode III crack, which included the extreme cases for an impermeable crack and a permeable crack. The results were illustrated with plots, showing that in the absence of mechanical loads, an applied electric or magnetic field, positive or negative, always tended to close the crack. On the other hand, in the presence of a mechanical load, a negative electric or magnetic field retarded crack growth, while a positive field could either enhance or retard crack propagation, depending on the strengths of the applied electric/magnetic fields and the level of the mechanical load as well. In other words, the effect of electric/magnetic fields on the fracture behavior is mechanical load-dependent.     

A magnetoelectroelastic medium with an elliptical cavity under combined mechanical–electric–magnetic loading

The solution for an elliptical cavity in an infinite two-dimensional magnetoelectroelastic medium subject to remotely uniformly applied combined mechanical–electric–magnetic loadings is obtained by using the Stroh formalism and the exact boundary conditions along the surface of the cavity. By letting the minor-axis of the cavity to zero the solution for a crack is deduced. A self-consistent method is proposed to calculate the real crack opening under the combined mechanical–electric–magnetic loadings. The method requires that the crack opening is the minor-axis of the elliptical opening profile. Beside the real crack solution, four different extreme models, i.e., the impermeable crack, permeable crack, electrically impermeable and magnetically permeable crack and electrically permeable and magnetically impermeable crack, are discussed. An expression of the strain energy density factor is derived. Numerical results of the strain energy density at the crack tip are given for a BaTiO₃–CoFe₂O₄ composite with the piezoelectric BaTiO₃ material being the inclusion and the magnetostrictive CoFe₂O₄ material being the matrix. The effects of the proportion of the two phases, permeability of the crack to electric and magnetic fields, the electric and magnetic loadings on the strain energy density factor are discussed.     

Magneto-electro-elastic antiplane analysis of a bimaterial BaTiO3–CoFe2O4 composite wedge with an interface crack

The antiplane analysis is made for a bimaterial BaTiO₃–CoFe₂O₄ composite wedge containing an interface crack. The coupled magneto-electro-elastic field is induced by the piezoelectric/piezomagnetic BaTiO₃–CoFe₂O₄ composite materials. For the crack problems, the intensity factors of stress, strain, electric displacement, electric field, magnetic induction and magnetic field at crack tips are derived analytically. Also, the energy density criterion is applied to predict the fracture behavior of the interface crack. The numerical results also show that the energy release rate for a crack in a single wedge is negative.     

Pre-kinking of a moving crack in a magnetoelectroelastic material under in-plane loading

A constant moving crack in a magnetoelectroelastic material under in-plane mechanical, electric and magnetic loading is studied for impermeable crack surface boundary conditions. Fourier transform is employed to reduce the mixed boundary value problem of the crack to dual integral equations, which are solved exactly. Steady-state asymptotic fields near the crack tip are obtained in closed form and the corresponding field intensity factors are expressed explicitly. The crack speed influences the singular field distribution around the crack tip and the effects of electric and magnetic loading on the crack tip fields are discussed. The crack kinking phenomena is investigated using the maximum hoop stress intensity factor criterion. The magnitude of the maximum hoop stress intensity factor tends to increase as the crack speed increases.     

Fracture of a rectangular piezoelectromagnetic body

The singular stress, electric fields and magnetic fields in a rectangular piezoelectromagnetic body containing a center Griffith crack under longitudinal shear are obtained. Fourier transforms and Fourier sine series are used to reduce the mixed boundary value problems of the crack, which is assumed to be impermeable, to dual integral equations. The solution of the dual integral equations is then expressed in terms of Fredholm integral equations of the second kind. Expressions for stresses, electric displacements and magnetic inductions in the vicinity of the crack tip are derived. Also obtained are the field intensity factors and the energy release rates. Numerical results obtained show that the geometry of the rectangular body have significant influence on the field intensity factors and the energy release rates.     

刚度微分法计算压电材料平面断裂问题

把计算应变能释放率的刚度微分法推广到压电材料平面断裂问题．在此基础上，利用压电材料平面断裂问题的有限元数值解作为真实场，用Ｓｏｓａ的平面问题裂端渐近解作为辅助场，由推广的交互Ｍ积分法求得了应力强度因子ＫＩ，ＫＩＩ和电位移强度因子ＫＩＶ．算例表明，计算结果与理论解符合得很好     

On phase transitions in a domain of material inhomogeneity. II. Interaction of a crack with an inclusion experiencing a phase transition

We pose and study the problem on the interaction between a crack and an inclusion experiencing a phase transition of martensite type. We develop an algorithm for determining the inclusion phase state, which is numerically implemented with the finite element method. This procedure is used to study the inclusion phase transitions in the crack-induced field including the effects of the interaction between the crack and the inclusion. The detailed strain fields are calculated depending on the relative position of the crack and the inclusion, the external field, and the material parameters. It is shown that, for sufficient residual strains arising in the inclusion because of the crack, the inclusion material experiences a phase transition, which, in turn, can change the character of the subsequent crack propagation. We demonstrate that a stress-independent intrinsic phase transition, which can be caused, for example, by a change in the temperature, can also affect the crack propagation path. We also show that the influence of the phase transition induced field on the crack propagation path can be suppressed by the external field.     

ASYMPTOTIC SOLUTIONS OF MODE I STEADY GROWTH CRACK IN MATERIALS UNDER CREEP CONDITIONS

An asymptotic analysis is made on problems with a steady-state crack growth coupled with a creep law model under tensile loads. Asymptotic equations of crack tip fields in creep materials are derived and solved numerically under small scale conditions. Stress and strain functions are adopted under a polar coordinate system. The governing equations of asymptotic fields are obtained by inserting the stress field and strain field into the material law. The crack growth rate rather than fracture criterion plays an important role in the crack tip fields of materials with creep behavior.