A genetic algorithm optimization of ring-stiffened cylindrical shells for axial and radial buckling loads

In this research, the general axial and radial buckling optimization of ring-stiffened cylindrical shells is implemented by the genetic algorithm (GA). The stiffened shell is subjected to four constraints including the fundamental frequency, the structural weight, the axial buckling load, and the radial buckling load. In addition, six design variables including shell thickness, number of stiffeners, stiffeners width and height, stiffeners eccentricity distribution order, and stiffeners spacing distribution order are considered. In analytical solution, the Ritz method is applied and stiffeners are treated as discrete elements. The effect of the weighting coefficients of the objective functions on the optimum solution is studied. The results show that optimized stiffening a cylindrical shell leads to a lower structural weight, higher natural frequencies, and larger axial and radial buckling loads, simultaneously. In addition, the upper and lower bounds of the design variables influence the optimum results considerably. It is also found that the distributions of eccentricity and spacing of the stiffeners influence the magnitudes of the axial and radial buckling loads considerably.     

黏弹性板的大挠度蠕变屈曲

研究了具有初始小挠度受轴向压载黏弹性板的蠕变屈曲问题，在建立控制方程时，利用了von Karman非线性应变-位移关系，并考虑了初始挠度，用标准线性固体模型描述材料的黏弹性特性，在求解非线性积分方程时，利用梯形公式计算记忆积分式，将非线性积分方程化为非线性代数方程进行数值求解，得到了结构的蠕变变形过程，又将问题退化到小挠度情况进行研究，得到了挠度随时间扩展的解析解，分析了瞬时失稳临界载荷、持久临界载荷的物理意义，讨论了考虑几何非线性对黏弹性板蠕变屈曲的影响。     

Non-linear buckling behavior of FGM truncated conical shells subjected to axial load

In this study, the non-linear buckling behavior of truncated conical shells made of functionally graded materials (FGMs), subject to a uniform axial compressive load, has been investigated using the large deformation theory with von the Karman-Donnell-type of kinematic non-linearity. The material properties of functionally graded shells are assumed to vary continuously through the thickness of the shell. The variation of properties followed an arbitrary distribution in terms of the volume fractions of the constituents. The fundamental relations, the modified Donnell type non-linear stability and compatibility equations of functionally graded truncated conical shells are obtained and are solved by superposition and Galerkin methods and the upper and lower critical axial loads have been found analytically. Finally, the influences of the compositional profile variations and the variation of the shell geometry on the upper and lower critical axial loads are investigated. Comparing the results of this study with those in the literature validates the present analysis.     

Nonlinear analysis on dynamic buckling of eccentrically stiffened functionally graded material toroidal shell segment surrounded by elastic foundations in thermal environment and under time-dependent torsional loads

The nonlinear analysis with an analytical approach on dynamic torsional buckling of stiffened functionally graded thin toroidal shell segments is investigated. The shell is reinforced by inside stiffeners and surrounded by elastic foundations in a thermal environment and under a time-dependent torsional load. The governing equations are derived based on the Donnell shell theory with the von K′arm′an geometrical nonlinearity,the Stein and McE lman assumption, the smeared stiffeners technique, and the Galerkin method. A deflection function with three terms is chosen. The thermal parameters of the uniform temperature rise and nonlinear temperature conduction law are found in an explicit form. A closed-form expression for determining the static critical torsional load is obtained. A critical dynamic torsional load is found by the fourth-order Runge-Kutta method and the Budiansky-Roth criterion. The effects of stiffeners, foundations, material,and dimensional parameters on dynamic responses of shells are considered.     

Size-dependent axial buckling analysis of functionally graded circular cylindrical microshells based on the modified strain gradient elasticity theory

In this paper, a size-dependent first-order shear deformable shell model is developed based upon the modified strain gradient theory (MSGT) for the axial buckling analysis of functionally graded (FG) circular cylindrical microshells. It is assumed that the material properties of FG materials, which obey a simple power-law distribution, vary through the thickness direction. The principle of virtual work is utilized to formulate the governing equations and corresponding boundary conditions. Numerical results are presented for the axial buckling of FG circular cylindrical microshells subject to simply-supported end conditions and the effects of material length scale parameter, material property gradient index, length-to-radius ratio and circumferential mode number on the size-dependent critical buckling load are extensively studied. For comparison purpose, the critical buckling loads predicted by modified couple stress theory (MCST) and classical theory (CT) are also presented. Results show that the size effect plays an important role for lower values of dimensionless length scale parameter. Moreover, it is observed that the critical buckling loads obtained based on MSGT are greater than those obtained based on MCST and CT.     

在轴向应力波传播和反射过程中弹性有限长圆柱壳非对称动态屈曲

本文讨论弹性有限长圆柱壳端部受冲击载荷作用，在轴向应力波传播和反射过程中的非对称动态屈曲问题。通过建立和求解扰动方程得到了动态屈曲的分叉条件，临界载荷和屈曲模态。数值结果表明：当壳壁厚不很薄时，轴对称屈曲临界载荷比非轴对称临界载荷高；反之，轴对称临界载荷会比非对称临界载荷低；由于应力波的反射，临界载荷降低，因而更容易发生屈曲，屈曲模态也有其不同特点。     

Torsional buckling of spherical shells under circumferential shear loads

ＩｎｔｒｏｄｕｃｔｉｏｎＩｍｐｏｒｔａｎｔａｐｌｉｃａｔｉｏｎｓｏｆｔｈｅｓｔａｂｉｌｉｔｙａｎａｌｙｓｉｓｏｆｓｈｅｌｓｃａｎｂｅｆｏｕｎｄｉｎｔｈｅｍｏｄｅｒｎｅｎｇｉｎｅｒｉｎｇｒａｎｇｉｎｇｏｖｅｒｔｈｅａｅｒｏｓｐａｃｅ,ｍａｒｉｎｅ,ａｒ...     

Nonlinear stability of functionally graded material (FGM) sandwich cylindrical shells reinforced by FGM stiffeners in thermal environment

In this paper, Donnell's shell theory and smeared stiffeners technique are improved to analyze the postbuckling and buckling behaviors of circular cylindrical shells of stiffened thin functionally graded material(FGM) sandwich under an axial loading on elastic foundations, and the shells are considered in a thermal environment. The shells are stiffened by FGM rings and stringers. A general sigmoid law and a general power law are proposed. Thermal elements of the shells and reinforcement stiffeners are considered. Explicit expressions to find critical loads and postbuckling load-deflection curves are obtained by applying the Galerkin method and choosing the three-term approximate solution of deflection. Numerical results show various effects of temperature, elastic foundation, stiffeners, material and geometrical properties, and the ratio between face sheet thickness and total thickness on the nonlinear behavior of shells.     

A NUMERICAL CALCULATION OF DYNAMIC BUCKLING OF A THIN SHALLOW SPHERICAL SHELL UNDER IMPACT

Assuming the deformation of the shell has an axial symmetrical form, we transform Marguerre's equations into difference equations, and use these equations to discuss the buckling of an elastic thin shallow spherical shell subjected to impact loads. The result shows when impact load acts on the shells, a jump of the shell takes place dependent on the values λ and the critical buckling load increases with the enlargement of the loading area.     

弹性圆柱壳在轴向应力波传播过程中的非对称屈曲

讨论弹性圆柱壳端部受冲击载荷作用，在应力波传播过程中的非对称屈曲问题。通过求解扰动方程得到了动态屈曲的分叉条件、临界载荷和屈曲模态。数值结果表明，当壳壁厚不很薄时，轴对称屈曲临界载荷比非对称临界载荷高；反之，轴对称临界载荷会比非对称临界载荷低。不同的冲击载荷，屈曲模态也将不同。