首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到17条相似文献,搜索用时 125 毫秒
1.
传统的最大层间位移作为一个全局性的性能指标,超出给定的性能极限状态阈值就不能映射构件局部损伤状态。本文基于能量平衡原理,将塑性能量耗散和塑性铰的等效能相比得到累积塑性应变,将累积塑性应变这一反映局部损伤状态的损伤指标作为工程需求参数,假定一系列累积塑性应变阈值建立局部构件的易损性曲线族。以传统的最大层间位移作为反映全局性能水准的工程需求参数,建立结构全局性能极限状态下的易损性曲线。对比全局和局部易损性曲线,发现全局性能水准和局部构件损伤状态之间存在良好的相关性,通过易损性曲线的吻合程度可获得给定全局性能水准相对应的累积塑性应变阈值。进而也建立起全局性能指标与局部损伤状态的映射关系。基于累积塑性应变的机构易损性分析是一种更精确的易损性分析方法。  相似文献   

2.
全局性能水准与构件局部损伤状态   总被引:2,自引:2,他引:0  
传统的最大层间位移作为一个全局性的性能指标,超出给定的性能极限状态阈值就不能映射构件局部损伤状态。本文基于能量平衡原理,将塑性能量耗散和塑性铰的等效能相比得到累积塑性应变,将累积塑性应变这一反映局部损伤状态的损伤指标作为工程需求参数,假定一系列累积塑性应变阈值建立局部构件的易损性曲线族。以传统的最大层间位移作为反映全局性能水准的工程需求参数,建立结构全局性能极限状态下的易损性曲线。对比全局和局部易损性曲线,发现全局性能水准和局部构件损伤状态之间存在良好的相关性,通过易损性曲线的吻合程度可获得给定全局性能水准相对应的累积塑性应变阈值。进而也建立起全局性能指标与局部损伤状态的映射关系。基于累积塑性应变的机构易损性分析是一种更精确的易损性分析方法。  相似文献   

3.
将基于性能的多维易损性分析方法,结合显示连通贝叶斯网络,应用于机场塔台的多维易损性分析。考虑地震激励的不确定性,通过非线性时程分析获得结构响应数据;将塔台结构分为三个层次,每个层次按包含的层数分为相应的子层次。根据功能特性确定子层次的评价指标和极限状态,建立服从多元对数正态分布的概率地震需求模型;考虑各种极限状态之间的相关性,建立极限状态方程,确定失效域,通过蒙特卡洛法求得构件的超越概率;建立塔台结构的显示连通贝叶斯网络模型,利用层次分析法获得中间节点的条件概率表,利用MATLAB进行贝叶斯网络的推理计算,实现从单一层次的易损性到整体易损性的推理。  相似文献   

4.
Legendre积分法在随机有限元法中的应用   总被引:1,自引:0,他引:1  
杨杰  陈虬 《计算力学学报》2005,22(2):214-216
将Legendre积分法应用于随机结构的有限元分析,针对非线性问题,建立基于Legendre积分法的随机有限元列式。选择不同的Legendre积分点数目进行算例分析,并用Monte—Carlo法的计算进行对比研究,考察该方法的有效性。计算结果表明本文提出的Legendre积分随机有限元有很高的计算效率,在精度上,较少的积分点在一阶矩、二阶矩计算上即有较高的精度,在积分点数较多时,三阶矩、四阶矩也有较高的精度。  相似文献   

5.
基于平均加速度概念的传统Newmark法无法直接求解状态空间一阶微分方程组,是因为方程中不显含加速度项。提出了采用平均速度Newmark法结合Riccati传递矩阵法,命名为平均速度Newmark-Riccati传递矩阵法(AVN-RTMT),对转子系统进行瞬态响应计算。对方法的稳定性进行了理论分析,证明了其无条件稳定。对于基础受冲击的转子系统,由于平均速度概念和基础冲击激励的引入,系统节点状态矢量传递方程、传递矩阵和系统响应具体求解与经典Riccati传递矩阵法存在很大不同,从而推演出了基于一阶微分形式的节点瞬态传递方程,给出了算法实现响应求解的一般步骤,最终成功地得到了位移、速度和加速度响应的时间历程。并建立了算法验证的实验,验证了算法的准确性。进一步表明AVN-RTMT可以作为一种新的结构瞬态响应计算算法。  相似文献   

6.
核电结构的易损性分析是核电厂地震安全评估中至关重要的一环, 但是由于核电结构的复杂性以及考虑土?结相互作用SSI时较大的计算规模, 使得计算核电厂设备易损性曲线十分耗时. 为发展高效的核电厂设备易损性分析方法, 本文采用核电结构土?结相互作用分析的分区计算方法, 并利用有限的SSI分析结果建立神经元模型ANN代替有限元模型, 分别基于对数正态假定的回归法和蒙特卡洛法进行了设备易损性分析. ANN数值模拟包括了以下内容: (1)基于半偏相关系数选择最相关的地震动参数作为ANN输入, 并通过交叉检验建立神经元模型; (2)量化研究ANN数值模拟的预测不确定性, 其中包含了由于简化地震动输入引起的随机不确定性和训练样本缺失引起的认知不确定性; (3)基于ANN模型预测结果分别采用蒙特卡洛法和基于对数正态假定的回归法进行设备的易损性分析. 本文探讨了不同的地震强度指标以及土层材料的不确定性对易损性曲线的影响, 同时验证了回归法中对数正态模型假定的基本合理性, 为核电厂设备易损性分析提供了一种可能方向.   相似文献   

7.
表征地下结构抗震性能的研究不多,而性能化设计方法需要确定结构物在地震作用下的极限状态.本文根据地铁车站特点,从结构变形性能和止水性能两个方面定义了抗震性能的四个极限状态,并以结构最大层间位移角作为特征指标.以上海某多层地铁车站为背景,建立了土-结构二维有限元模型,采用增量动力分析法研究该类结构的抗震极限状态,建立了增量动力分析法的地震动强度指标结构底部峰值加速度与结构性能指标最大层间位移角的关系曲线,给出了该地铁车站结构4个极限状态的最大层间位移角界限值.  相似文献   

8.
-5 表征地下结构抗震性能的研究不多,而性能化设计方法需要确定结构物在地震作用下的极限状态. 本文根据地铁车站特点,从结构变形性能和止水性能两个方面定义了抗震性能的四个极限状态,并以结构最大层间位移角 作为特征指标. 以上海某多层地铁车站为背景,建立了土--结构二维有限元模型,采用增量动力分析法 研究该类结构的抗震极限状态,建立了增量动力分析法的地震动强度指标结构底部峰值加速度与结构性能指标最大层间位移角 的关系曲线,给出了该地铁车站结构4个极限状态的最大层间位移角界限值.  相似文献   

9.
对基础隔震结构进行基于性能的易损性分析。首先,建立了基础隔震结构基于拟力法的能量方程,提出基于变形和隔震层塑性耗能的损伤指标,定义隔震结构的四个损伤性能状态;然后,对隔震结构进行动力非线性分析,计算得到两种损伤指标的损伤值;最后,对损伤值进行线性统计回归分析,推导出结构发生各级破坏的概率计算公式,从而分别得到隔震结构基于两种损伤指标的易损性曲线。研究表明,基于隔震层塑性耗能的损伤指标更能合理反映该结构的损伤程度,为基于性能的隔震结构易损性分析提供了新的思路和方法。  相似文献   

10.
基于时变可靠性性能函数首次穿越时间的概率密度F-PTPD(first-passage time probability density)模型,提出了一种求解机械产品全寿命周期可靠性累计概率密度函数的方法(简称F-PTPD方法),为产品在全寿命周期内可靠性分析和设计提供了工具。首先,采用稀疏网络随机配置方法进行时变可靠性性能函数均值的估计,选取性能函数均值为零的第一个时刻点作为首次穿越点;其次,基于均值的首次穿越点将时变可靠性性能函数进行二阶泰勒展开,利用二次函数的性质求解性能函数首次穿越时间关于随机输入变量的函数;再次,针对首次穿越点函数,采用稀疏网络随机配置方法进行首次穿越时间的四阶原点矩估计;最后,基于四阶原点矩利用最大熵概率密度函数估计方法,推导出首次穿越点的概率分布,获得产品寿命周期内时变可靠性的累计概率密度函数。本文方法可获得产品整个寿命周期失效概率的变化趋势,极大地提高了评估效率,对复杂产品的可靠性评估设计有一定的工程指导意义。  相似文献   

11.
将凸集模型应用于结构的地震多维易损性分析。建立钢筋混凝土框架结构模型,选择最大层间位移角和最大层加速度两种参数建立多维性能极限状态方程。通过平均信息熵理论,获得两种参数的区间估计。考虑椭球模型和区间模型两种形式的凸集模型,在标准空间内通过拉丁超立方抽样生成样本点,通过矩阵变换将其映射到凸集空间内,建立结构地震响应的凸集模型。将凸集变量样本点代入极限状态方程,进行了易损性分析。采用概率模型进行对比计算,研究表明,与概率模型相比,当PGA较小时,凸集模型的破坏概率较大,而PGA较大时,凸集模型的破坏概率较小;椭球模型和凸集模型的分析结果差距较小,在各个PGA下破坏概率差值仅为0.05~0.1,因此可以不考虑凸集类型不同对易损性分析结果的差异。  相似文献   

12.
It is aimed to propose a copula based systematic quantitative method for system reliability analysis of engineering structures considering multiple dependent failure modes. The principles of the moment matching method, the copula theory and the bound theory are combined to achieve the purpose. As the very first step, the moment estimation of the limit state function of each component is calculated by anchored ANOVA (Analysis of Variance) expansion. The third moment saddle point approximation is then applied to derive the distribution of each performance function and evaluate the reliability index with obtained moments. By introducing copula functions into the narrow bounds theory, the traditional reliability method is improved. The best-fitting copula function is determined to ensure the accuracy of the joint probabilistic modeling between the dependent failure modes. A novel feature of the proposed method is the use of the copula concept, instead of traditional numerical integration commonly used in the joint failure probability estimation. Examples are presented to illustrate the accuracy and applicability of the presented method.  相似文献   

13.
非高斯随机激励下工程结构可靠性估计的一种方法   总被引:1,自引:0,他引:1  
本文将工程结构考虑为振动系统,把随机载荷及在结构上的载荷效应作为随机过程,分析状态函数的高阶矩,进行最大熵概率分析,得到结构在随机载荷作用下失效的概率。此法为随机环境下工作的结构、构件或设备的安全设计、可靠性检验提供了一个可行的方法。  相似文献   

14.
Moment transport methods are being developed to model poly‐dispersed multiphase flows by transporting statistical moments of the particle size–velocity joint probability density function (JPDF). A common feature of these methods is the requirement to reproduce or approximate the form of the JPDF from the transported moments for calculation of body force terms and other source terms. This paper examines the application of a maximum entropy technique against phase Doppler anemometry data sets from an electrostatically charged kerosene spray and also an automotive pressure swirl atomizer. An assessment of which moments are required to reproduce the JPDFs using a maximum entropy assumption to a sufficient level of accuracy is made. It is found that it is possible to reproduce the JPDFs to a high level of accuracy using a large number of moments; however, this incurs large computational overheads. If the moments to be transported are chosen on the basis of physical reasoning (such as the relationship between size and velocity due to drag) it is possible to reduce the number of moments to those which would be conserved via balance equations. This permits an approximation to the JPDF commensurate with the closure level of the moment transport method and thus the closure model method is naturally scalable with the degree of information from available conservation equations. Copyright © 2008 John Wiley & Sons, Ltd.  相似文献   

15.
陈建兵  律梦泽 《力学学报》2019,51(5):1437-1447
随机过程或随机系统响应的最大绝对值概率分布往往是科学与工程中关心的重要挑战性问题.本文从理论与数值上进行了Markov过程的时变最大绝对值过程及其概率分布研究.文中,通过引入扩展状态向量,构造了最大绝对值$\!$-$\!$-$\!$状态量联合向量过程,由此将不具有Markov性的最大值过程转化为具有Markov性的向量随机过程.在此基础上,通过最大绝对值$\!$-$\!$-$\!$状态量之间的关系,建立了联合向量过程的转移概率密度函数.进而,结合Chapman-Kolmogorov方程和路径积分方法,提出了最大绝对值概率密度函数求解的数值方法.由此,可以得到Markov过程最大绝对值过程的时变概率密度函数,可进一步用于结构动力可靠度分析等.通过数值算例,验证了本文所提方法的有效性. 该方法有望推广到更一般随机系统的极值分布估计之中.   相似文献   

16.
The response of a rigid rectangular block resting on a rigid foundation and acted upon simultaneously by a horizontal and a vertical random white-noise excitation is considered. In the equation of motion, the energy dissipation is modeled through a viscous damping term. Under the assumption that the body does not topple, the steady-state joint probability density function of the rotation and the rotational velocity is obtained using the Fokker-Planck equation approach. Closed form solution is obtained for a specific combination of system parameters. A more general but approximate solution to the joint probability density function based on the method of equivalent non-linearization is also presented. Further, the problem of overturning of the block is approached in the framework of the diffusion methods for first passage failure studies. The overturning of the block is deemed incipient when the response trajectories in the phase plane cross the separatrix of the conservative unforced system. Expressions for the moments of first passage time are obtained via a series solution to the governing generalized Pontriagin-Vitt equations. Numerical results illustra- tive of the theoretical solutions are presented and their validity is examined through limited amount of digital simulations.  相似文献   

17.
A procedure for studying the first-passage failure of strongly non-linear oscillators with time-delayed feedback control under combined harmonic and wide-band noise excitations is proposed. First, the time-delayed feedback control forces are expressed approximately in terms of the system state variables without time delay. Then, the averaged Itô stochastic differential equations for the system are derived by using the stochastic averaging method. A backward Kolmogorov equation governing the conditional reliability function and a set of generalized Pontryagin equations governing the conditional moments of first-passage time are established. Finally, the conditional reliability function, the conditional probability density and moments of first-passage time are obtained by solving the backward Kolmogorov equation and generalized Pontryagin equations with suitable initial and boundary conditions. An example is worked out in detail to illustrate the proposed procedure. The effects of time delay in feedback control forces on the conditional reliability function, conditional probability density and moments of first-passage time are analyzed. The validity of the proposed method is confirmed by digital simulation.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号