首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到19条相似文献,搜索用时 109 毫秒
1.
李清海  谭笃光 《江苏力学》1996,(11):162-170
本文用有限元理论,研究了在车辆荷载作用下桥梁结构动力响应问题,考虑了多轴及多个车辆作用于多种支承条件下的桥梁,文中用超单元法建立车辆荷载的运动方程:用三次插值函数建立桥梁结构的运动方程;然后利用振型叠加,对桥梁结构的运动方程进行坐标变换,再选用逐步积分法进行求解。  相似文献   

2.
为了评估人行荷载作用下梁式结构的振动舒适度,利用微分求积-积分求积,即DQ-IQ混合法求解移动荷载作用下梁的振动响应。人行荷载作用下梁式结构的振动控制方程是含Dirac函数的偏微分方程,首先利用IQ法离散与时间相关的Dirac函数,再利用DQ法把控制方程转化为二阶常系数微分方程,最后利用Newmark算法求解微分方程。以某钢结构连廊为例,利用DQ法计算结构自振频率并与解析解进行对比,结果验证了节点选取和边界条件施加的合理性,再利用DQ-IQ混合法和振型叠加法分别计算了不同行走步频下连廊的响应,计算结果表明,DQ-IQ混合法具有较高的可靠性和精确性。DQ-IQ混合法也可以推广到诸如车辆荷载作用下路面或桥梁的动力响应等其他移动荷载下结构的振动分析。  相似文献   

3.
为了评估人行荷载作用下梁式结构的振动舒适度,利用微分求积-积分求积,即DQ-IQ混合法求解移动荷载作用下梁的振动响应。人行荷载作用下梁式结构的振动控制方程是含Dirac函数的偏微分方程,首先利用IQ法离散与时间相关的Dirac函数,再利用DQ法把控制方程转化为二阶常系数微分方程,最后利用Newmark算法求解微分方程。以某钢结构连廊为例,利用DQ法计算结构自振频率并与解析解进行对比,结果验证了节点选取和边界条件施加的合理性,再利用DQ-IQ混合法和振型叠加法分别计算了不同行走步频下连廊的响应,计算结果表明,DQ-IQ混合法具有较高的可靠性和精确性。DQ-IQ混合法也可以推广到诸如车辆荷载作用下路面或桥梁的动力响应等其他移动荷载下结构的振动分析。  相似文献   

4.
桥梁结构移动平稳随机荷载识别新方法   总被引:4,自引:2,他引:2       下载免费PDF全文
移动的平稳随机荷载对简支梁的作用,相当于固定的调制函数已知的非平稳随机荷载对简支梁结构的作用.本文以此为基础,研究了移动平稳随机荷载的识别问题.首先基于虚拟激励法的思想,利用特征值分解及奇异值分解技术,由虚拟位移响应反演虚拟广义坐标,有效地避免了矩阵求逆,得到高精度的广义坐标谱;同时利用Wiener-Khintchine关系及Duhamel积分,由广义坐标谱值反演得到平稳随机激励谱密度.仿真算例表明,只要适当地选取参振振型及测点位置,本文方法可以有效地识别桥梁结构的移动平稳随机荷载.  相似文献   

5.
应用有限元法将连续桥梁结构离散为两跨耦合欧拉-伯努利梁模型.利用Newmark直接积分法求出在移动车载作用下桥梁的动态响应,并进一步推导出动态响应桥梁对物理参数(如杨氏模量)的时域灵敏度.在反问题中利用基于响应灵敏度的有限元模型修正法识别出桥梁的局部损伤,并讨论了人工测量噪声对损伤识别结果的影响.算例表明本文方法能够快速有效地识别出耦合梁系统的局部损伤,并具有精度高、对测量噪声不敏感等特点.  相似文献   

6.
基于广义卡尔曼滤波的桥梁结构物理参数识别   总被引:1,自引:0,他引:1  
基于广义卡尔曼滤波提出了随机荷载作用下桥梁结构物理参数的识别方法。首先,以荷载为观测对象,推导出基于有限元模型的桥梁结构系统的观测方程,以结构待识别的物理参数为状态向量,建立系统状态方程;然后,对该状态方程和观测方程构成的非线性参数系统应用广义卡尔曼滤波,从而识别出结构的物理参数。对一座简支梁桥和一座三跨连续梁桥在不同工况下的物理参数识别进行了数值仿真,结果表明本文方法能够准确地识别桥梁结构全部刚度参数、质量参数和阻尼参数,且具有很强的抗噪性能,从而验证了本文方法的有效性和鲁棒性,可应用于识别大型桥梁结构的物理参数。  相似文献   

7.
镇斌  拜寅康 《力学季刊》2021,42(1):80-86
本文研究了梁跨长对移动荷载下梁稳态响应的影响.在以往的研究中,通常采用Galerkin 方法或者有限元方法计算不同长度的梁的动力响应.当梁长的增加不再明显改变梁的动力响应时,可认为梁此时的长度可以代替无穷长时的情况.采用上述方法的研究表明,当梁长大于10 m 时,就可以用有限长梁近似无限长梁的响应.本文通过求解有限长梁和无限长梁在移动荷载下的动力响应比较分析发现,上述结论在某些参数下并不成立.本文给出了能否使10 m 长梁来近似模拟无限长梁的具体判据.本文是对结构力学教材中梁结构振动计算问题的进一步分析和讨论,所得结论有助于更深入地理解移动荷载作用下有限长梁的响应以及梁结构影响线问题.  相似文献   

8.
针对梁式结构受移动荷载作用的非平稳随机振动问题,提出了一种综合利用微分求积法和虚拟激励法DQ-PEM的新方法。梁式结构受移动荷载作用的振动控制方程为含Dirac函数的偏微分方程,利用微分求积(DQ)-积分求积法(IQ)法将其振动控制方程转化为不含Dirac函数的常微分方程。同时,将表示荷载位置变化的Dirac函数视为移动荷载的非平稳化函数,再结合虚拟激励法的思想,可得梁式结构在确定性荷载作用下的虚拟响应,进而得到其非平稳随机响应。通过工程算例验证了该方法的准确性与有效性,并进一步讨论了不同速度和不同边界条件下梁式结构受移动荷载作用的随机振动问题。  相似文献   

9.
针对列车荷载作用下黏弹性半空间体响应的问题,利用虚拟激励法将系统的随机分析转化为确定性分析。根据列车荷载构造了相应的虚拟激励形式,通过傅里叶积分变换法把半空间体控制方程转入波数-频率域,并推导获得了系统虚拟响应的积分形式解。当相速度接近或大于瑞利波速时,积分形式解中被积函数往往具有奇异性和高振荡性,使得数值计算相当困难。对此,将被积函数图形化以确定函数的积分限,并通过自适应数值积分算法解决被积函数的振荡性。数值算例中,进行了随机列车荷载作用下半空间体的响应分析,讨论了荷载移动速度及频率等参数变化对响应的影响,给出了响应的时间和空间分布规律。本文方法可进一步推广至移动矩形荷载等载荷模型,对移动荷载作用下环境振动行为预测具有很好的借鉴意义。  相似文献   

10.
研究了移动简谐荷载作用下轨道结构的动态响应特性,首先,将轨道结构简化为连续离散点支撑的弹性Euler梁模型,并建立了移动荷载作用下轨道系统动力学微分方程,基于无限周期结构在频域内的性质和叠加原理,推导出了移动简谐荷载作用下轨道结构上任意点的动态响应解析表达式;然后,数值分析了激励频率、扣件刚度、扣件阻尼对轨道结构动态响应的影响。研究结果表明:钢轨动态响应共振峰出现在荷载激励频率附近;随着激励频率的增大,钢轨动态响应峰值向高频方向移动;在高频段内,钢轨动态响应随着扣件刚度的增大而增大;扣件阻尼对系统的共振峰值及峰值带宽无显著影响,但在高频段内扣件阻尼具有明显抑制振动的作用,通过增大阻尼可以有效控制轨道的高频振动。  相似文献   

11.
Bridge weigh-in-motion systems are based on the measurement of strain on a bridge and the use of the measurements to estimate the static weights of passing traffic loads. Traditionally, commercial systems employ a static algorithm and use the bridge influence line to infer static axle weights. This paper describes the experimental testing of an algorithm based on moving force identification theory. In this approach the bridge is dynamically modeled using the finite element method and an eigenvalue reduction technique is employed to reduce the dimension of the system. The inverse problem of finding the applied forces from measured responses is then formulated as a least squares problem with Tikhonov regularization. The optimal regularization parameter is solved using the L-curve method. Finally, the static axle loads, impact factors and truck frequencies are obtained from a complete time history of the identified moving forces.  相似文献   

12.
In this paper, the spectral element method(SEM)is improved to solve the moving load problem. In this method, a structure with uniform geometry and material properties is considered as a spectral element, which means that the element number and the degree of freedom can be reduced significantly. Based on the variational method and the Laplace transform theory, the spectral stiffness matrix and the equivalent nodal force of the beam-column element are established. The static Green function is employed to deduce the improved function. The proposed method is applied to two typical engineering practices—the one-span bridge and the horizontal jib of the tower crane. The results have revealed the following. First, the new method can yield extremely high-precision results of the dynamic deflection, the bending moment and the shear force in the moving load problem.In most cases, the relative errors are smaller than 1%. Second, by comparing with the finite element method, one can obtain the highly accurate results using the improved SEM with smaller element numbers. Moreover, the method can be widely used for statically determinate as well as statically indeterminate structures. Third, the dynamic deflection of the twin-lift jib decreases with the increase in the moving load speed, whereas the curvature of the deflection increases.Finally, the dynamic deflection, the bending moment and the shear force of the jib will all increase as the magnitude of the moving load increases.  相似文献   

13.
S. H. Ju 《Nonlinear dynamics》2012,69(1-2):173-183
This paper investigates the derailment of high-speed trains moving on multispan simply supported bridges. A?moving wheel finite element containing contact and separation modes was developed to simulate vehicle?Cbridge interaction problems under seismic loads. Rail irregularities and bridge?Crail?Ctrain interactions were appropriately considered in the nonlinear finite element analysis, which indicates that the derailment coefficients are enlarged with the increase of train speeds for high-speed trains moving on multispan simply supported bridges. The accelerations of elevated bridge girders may be significantly magnified during the seismic load; moreover, gaps between simply supported girders during seismic loads will produce large derailment coefficients.  相似文献   

14.
基于虚拟变形法的车-桥耦合系统移动质量识别   总被引:1,自引:0,他引:1  
张青霞  段忠东 《力学学报》2011,43(3):598-610
利用双自由度质量-弹簧阻尼模型模拟移动车辆, 并基于虚拟变形(VDM)方法的结构快速重分 析思想, 提出一种车-桥耦合系统的移动质量快速识别的有效方法. 该方法以双自由度车体模 型的质量为变量, 通过最小化桥体结构实测响应和计算响应的平方距离来识别移动质量 (载荷), 避免了识别载荷时常遇到的病态问题, 对噪声鲁棒性强, 且需要传感器信息少. 每步优化 中, 利用在VDM方法基础上提出的移动动态影响矩阵概念, 无需时时重构车-桥耦合系统的时 变系统参数矩阵, 显著提高了计算效率. 利用数值框架梁模型, 通过比较不同车辆简化模型 对移动体质量及等效移动载荷的识别效果, 验证了该方法的可行性和有效性, 即使在5% 的噪声影响下, 利用一个传感器可以准确地识别多个移动体的质量.  相似文献   

15.
A thermomechanical model of a shape memory alloy beam bending under tip force loading is implemented in finite element codes.The constitutive model is a one dimensional model which is based on free energy and motivated by statistical thermodynamics.The particular focus of this paper is on the aspects of finite element modeling and simulation of the inhomogeneous beam bending problem.This paper extends previous work which is based on the small deformation Euler-Bernoulli beam theory and by treating an SMA beam as consisting of multi-layers in a twodimensional model.The flux terms are involved in the heat transfer equation.The simulations can represent both shape memory effect and super-elastic behavior.Different thermal boundary condition effect and load rate effect can also be captured.  相似文献   

16.
Macroscopic finite elements are elements with an embedded analytical solution that can capture detailed local fields, enabling more efficient, mesh independent finite element analysis. The shape functions are determined based on the analytical model rather than prescribed. This method was applied to adhesively bonded joints to model joint behavior with one element through the thickness. This study demonstrates two methods of maintaining the fidelity of such elements during adhesive non-linearity and cracking without increasing the mesh needed for an accurate solution. The first method uses adaptive shape functions, where the shape functions are recalculated at each load step based on the softening of the adhesive. The second method is internal mesh adaption, where cracking of the adhesive within an element is captured by further discretizing the element internally to represent the partially cracked geometry. By keeping mesh adaptations within an element, a finer mesh can be used during the analysis without affecting the global finite element model mesh. Examples are shown which highlight when each method is most effective in reducing the number of elements needed to capture adhesive nonlinearity and cracking. These methods are validated against analogous finite element models utilizing cohesive zone elements.  相似文献   

17.
The study of actions of high-speed moving loads on bridges and elevated tracks remains a topical problem for transport. In the present study, we propose a new method for moving load analysis of elevated tracks (monorail structures or bridges), which permits studying the interaction between two strained objects consisting of rod systems and rigid bodies with viscoelastic links; one of these objects is the moving load (monorail rolling stock), and the other is the carrying structure (monorail elevated track or bridge). The methods for moving load analysis of structures were developed in numerous papers [1–15]. At the first stage, when solving the problem about a beam under the action of the simplest moving load such as a moving weight, two fundamental methods can be used; the same methods are realized for other structures and loads. The first method is based on the use of a generalized coordinate in the expansion of the deflection in the natural shapes of the beam, and the problem is reduced to solving a system of ordinary differential equations with variable coefficients [1–3]. In the second method, after the “beam-weight” system is decomposed, just as in the problem with the weight impact on the beam [4], solving the problem is reduced to solving an integral equation for the dynamic weight reaction [6, 7]. In [1–3], an increase in the number of retained forms leads to an increase in the order of the system of equations; in [6, 7], difficulties arise when solving the integral equations related to the conditional stability of the step procedures. The method proposed in [9, 14] for beams and rod systems combines the above approaches and eliminates their drawbacks, because it permits retaining any necessary number of shapes in the deflection expansion and has a resolving system of equations with an unconditionally stable integration scheme and with a minimum number of unknowns, just as in the method of integral equations [6, 7]. This method is further developed for combined schemes modeling a strained elastic compound moving structure and a monorail elevated track. The problems of development of methods for dynamic analysis of monorails are very topical, especially because of increasing speeds of the rolling stock motion. These structures are studied in [16–18].In the present paper, the above problem is solved by using the method for the moving load analysis and a step procedure of integration with respect to time, which were proposed in [9, 19], respectively. Further, these components are used to enlarge the possibilities of the substructure method in problems of dynamics. In the approach proposed for moving load analysis of structures, for a substructure (having the shape of a boundary element or a superelement) we choose an object moving at a constant speed (a monorail rolling stock); in this case, we use rod boundary elements of large length, which are gathered in a system modeling these objects. In particular, sets of such elements form a model of a monorail rolling stock, namely, carriage hulls, wheeled carts, elements of the wheel spring suspension, models of continuous beams of monorail ways and piers with foundations admitting emergency subsidence and unilateral links. These specialized rigid finite elements with linear and nonlinear links, included into the set of earlier proposed finite elements [14, 19], permit studying unsteady vibrations in the “monorail train-elevated track” (MTET) system taking into account various irregularities on the beam-rail, the pier emergency subsidence, and their elastic support by the basement. In this case, a high degree of the structure spatial digitization is obtained by using rods with distributed parameters in the analysis. The displacements are approximated by linear functions and trigonometric Fourier series, which, as was already noted, permits increasing the number of degrees of freedom of the system under study simultaneously preserving the order of the resolving system of equations.This approach permits studying the stress-strain state in the MTET system and determining accelerations at the desired points of the rolling stock. The proposed numerical procedure permits uniquely solving linear and nonlinear differential equations describing the operation of the model, which replaces the system by a monorail rolling stock consisting of several specialized mutually connected cars and a system of continuous beams on elastic inertial supports.This approach (based on the use of a moving substructure, which is also modeled by a system of boundary rod elements) permits maximally reducing the number of unknowns in the resolving system of equations at each step of its solution [11]. The authors of the preceding investigations of this problem, when studying the simultaneous vibrations of bridges and moving loads, considered only the case in which the rolling stock was represented by sufficiently complicated systems of rigid bodies connected by viscoelastic links [3–18] and the rolling stock motion was described by systems of ordinary differential equations. A specific characteristic of the proposed method is that it is convenient to derive the equations of motion of both the rolling stock and the bridge structure. The method [9, 14] permits obtaining the equations of interaction between the structures as two separate finite-element structures. Hence the researcher need not traditionally write out the system of equations of motion, for example, for the rolling stock (of cars) with finitely many degrees of freedom [3–18].We note several papers where simultaneous vibrations of an elastic moving load and an elastic carrying structure are considered in a rather narrow region and have a specific character. For example, the motion of an elastic rod along an elastic infinite rod on an elastic foundation is studied in [20], and the body of a car moving along a beam is considered as a rod with ten concentrated masses in [21].  相似文献   

18.
反求压电薄板智能结构荷载的有限元逆逼近方法   总被引:4,自引:0,他引:4  
基于压电薄板智能结构提出一种有限元逆逼近反求结构荷载参量的方法,逼近目标函数以压电电荷响应为参量,迭代初值采用单位荷载预逼近方法;数值算例表明了该方法的有效性,可用于解决压电智能结构的荷载识别问题。  相似文献   

19.
The moiré hole drilling method in a biaxially loaded infinite plate in plane stress is an inverse problem that exhibits a dual nature: the first problem results from first drilling the circular hole and then applying the biaxial loads, while the other problem arises from doing the opposite, i.e., first applying the biaxial load and then drilling the circular hole. The first problem is hardly ever addressed in the literature but implies that either separation of stresses or material property identification may be achieved from interpreting the moiré signature around the hole. The second is the well-known problem of determination of residual stresses from interpreting the moiré fringe orders around the hole. This paper addresses these inverse problem solutions using the finite element method as the means to model the plate with a hole, rather than the typical approach using the Kirsch solution, and a least-squares optimization approach to resolve for the quantities of interest. To test the viability of the proposed method three numerical simulations and one experimental result in a finite width plate are used to illustrate the techniques. The results are found to be in excellent agreement. The simulations employ noisy data to test the robustness of this approach. The finite-element-method-based inverse problem approach employed in this paper has the potential for use in applications where the specimen shape and boundary conditions do not conform to symmetric or well-used shapes. Also, it is a first step in testing similar procedures in three-dimensional samples to assess the residual stresses in materials.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号