共查询到19条相似文献,搜索用时 156 毫秒
1.
2.
3.
超基性岩体在金川矿区露采边坡稳定性评价中占有重要地位, 它是整体边坡的支撑体。本文研究了该岩体的物质组成、赋存环境、物理力学性质、岩体结构特征等。在此基础上, 对超基性岩体质量进行了评价。 相似文献
4.
用于岩体质量评价的地震波Q值计算方法 总被引:1,自引:0,他引:1
利用地震记录中的衰减信息(波形与频谱)计算岩体的品质因子(Q值),对岩体质量进行准确评价,典型的方法有振幅法、上升时间法、频谱比法、质心频率偏移法。本文介绍了这些方法的原理,并对它们的稳定性、适用情况做出了评价。 相似文献
5.
6.
7.
建立了一种基于压力梯度和渗流速度时间序列提取变质量破碎岩体渗透性参量(渗透率、非Darcy流β因子、加速度系数)的方法。首先,根据破碎岩体渗透性参量之间的幂指数关系和Forchheimer关系,建立了采样时刻渗透率的代数方程,并利用Newton切线法求得此代数方程的根;其次,对渗透性参量的参考值及幂指数进行优化。通过算例分析了该方法用于计算变质量破碎岩体渗透性参量的可行性及准确性。研究结果表明:随着细小颗粒的迁移流失,破碎岩体在恒定的压力梯度下,渗流速度和渗透率增加,非Darcy流β因子和加速度系数降低。 相似文献
8.
9.
10.
质点峰值振动速度(PPV)是爆破开挖扰动的重要指标,研究确定岩体临界损伤PPV对爆破损伤控制具有重要意义。以溪洛渡水电站640 m高程马道下边坡岩体的爆破开挖为工程背景,依据岩体跨孔声波测试结果,采用基于LS-DYNA的二次开发技术对保留岩体的损伤演化过程进行了数值模拟,结合数值模拟结果研究了爆破近区PPV的分布特征及其与损伤程度的对应关系,结果表明PPV存在门槛值,当PPV大于该值时,岩体的损伤变量从零开始迅速增加至0.8左右,之后随着PPV的增大,损伤增长速度明显减慢,直至岩体完全损伤;分别基于岩体的损伤度、最大拉应力的PPV判据以及近区拉应力峰值与PPV的统计关系等3种方法确定岩体临界损伤PPV,从定量衡量损伤区范围看,常用的基于最大拉应力的PPV判据确定的临界损伤PPV偏小,而其余2种方法确定的临界损伤PPV相对精确。 相似文献
11.
12.
13.
以Maen、Pieve、Cogolo和Varzo 4条隧道为例,本文分析说明了岩体质量分类系统不能预测TBM净掘进速率PR的原因:由于影响岩体可掘进性的因素与影响岩体质量的因素不一样,且岩体质量分类系统多采用半定性半定量的评分形式描述岩体条件,故岩体的质量分数值与TBM的净掘进速率PR很难有一一对应的关系。因此,岩体质量分类系统和基于此的预测模型不能够用来预测TBM的净掘进速率PR。根据TBM施工隧道岩体分类的目的及TBM施工的特点,提出预测TBM净掘进速率PR的岩体分类系统应与评价岩体稳定的岩体分类系统分开进行。用岩体可掘进性分类系统预测净掘进速率PR,用岩体质量分类系统预测TBM利用率U,从而计算出TBM的掘进速率AR。 相似文献
14.
跨海大桥由于受地形限制,桥基只能布设在单薄的海域岛礁上,而岛礁岩体质量及其边坡稳定将控制桥基型式及埋深。结合在建舟山大陆连岛工程西堠门大桥桥基所在的老虎山岛礁,针对其大跨度、高塔柱桥梁地基赋存的地质环境条件,综合考虑不同部位(即水上、水下及潮间带三个不同位置),提出以岩石力学性质、岩体结构类型、结构面发育特征(尤其是软弱结构面控制)、风化状况、地下水(受海水频繁潮涨潮落影响)等分级控制因素,并分别相应采用岩石单轴饱和抗压强度Rs、岩石质量指标RQD、岩体完整性系数Kv、风化程度系数KY及地下水影响修正系数U对上述分级控制因素进行量化,建立了反映海域岛礁岩体总体质量综合指数Z=Rs×RQD×Kv×KY+U,并相应得出不同级别岩体质量分级体系。 相似文献
15.
16.
《International Journal of Solids and Structures》2003,40(20):5229-5249
A meshfree approach, called displacement boundary method, for anisotropic Kirchhoff plate dynamic analysis is presented. This method is deduced from a variational principle, which uses a modified hybrid functional involving the generalized displacements and generalized tractions on the boundary and the lateral deflection in the domain as independent variables. The discretization process is based on the employment of the fundamental solutions of the static problem operator for the expression of the variables involved in the functional. The stiffness and mass matrices obtained for the dynamic model are frequency-independent, symmetric and positive definite and their computation involves boundary integrals of regular kernels only. Due to its features, the final resolving system can be solved with the classical approaches by using standard numerical procedures. To assess the formulation, the free vibrations of some anisotropic plates were calculated and the results compared with those obtained using other solution techniques. The present results are in good agreement with those found in the literature showing the accuracy and effectiveness of the proposed approach. 相似文献
17.
18.
19.
ABSTRACT A “design component method” that provides a unified and systematic organization of design sensitivity analysis for built-up structures is developed and implemented. Both conventional design variables, such as thickness and cross-sectional area, and shape design variables of components of built-up structures are considered. It is shown that design of components of built-up structures can be characterized and system design sensitivity expressions obtained by simply adding contributions from each component. The method leads to a systematic organization of computations for design sensitivity analysis that is similar to the way in which computations are organized within a finite element code. 相似文献