旋转压电纳米梁的振动分析

本文基于非局部弹性理论，对旋转压电纳米梁模型的振动进行了分析．首先由哈密顿原理导出旋转压电纳米梁的动力学控制方程及相应的边界条件；再通过微分求积法对控制方程和两类边界条件进行离散；最后通过数值计算分析振动特性．通过改变旋转角速度、轮毂半径、非局部参数以及外部电压分析它们对压电纳米梁振动频率的影响关系．数值结果表明这些参数对压电纳米梁固有频率有不可忽略的影响，本文进一步讨论了旋转角速度对结构模态的影响．     

框架结构P-△效应分析的微分求积单元法

采用一种新的数值方法——微分求积单元法分析框架结构的P-△效应。微分求积单元法采用微分求积法直接求解微分方程的技术，并结合有限分割技术而形成。首先建立考虑剪切变形和轴力二阶效应的框架结构单元平衡微分方程，通过微分求积离散而得到梁单元的一般弹性刚度方程；同时考虑变形后节点的平衡条件和变形协调条件，导出框架结构整体二阶分析的微分求积单元法力学模型。由于该分析模型中包括了单元及结构的所有离散形式的控制方程，因此采用该模型进行结构分析可得出较为精确的解。数值算例的分析比较，表明了该法用于框架结构P-△效应分析的正确性和有效性。本文导出的框架结构二阶分析的微分求积单元法力学模型可用于框架结构剪切变形与几何非线性的耦合效应分析。     

压电复合材料层合梁的分岔、混沌动力学与控制

研究了简支压电复合材料层合梁在轴向、横向载荷共同作用下的非线性动力学、分岔和 混沌动力学响应. 基于von Karman理论和Reddy高阶剪切变形理论，推导出了压电复合层合梁的动力学方程. 利用 Galerkin法离散偏微分方程，得到两个自由度非线性控制方程，并且利用多尺度法得到了平 均方程. 基于平均方程，研究了压电层合梁系统的动态分岔，分析了系统各种参数对倍周期 分岔的影响及变化规律. 结果表明，压电复合材料层合梁周期运动的稳定性和混沌运动对外 激励的变化非常敏感，通过控制压电激励，可以控制压电复合材料层合梁的振动，保持系统 的稳定性，即控制系统产生倍周期分岔解，从而阻止系统通过倍周期分岔进入混沌运动，并 给出了控制分岔图.     

Winkler-Pasternak弹性地基梁自由振动的二维弹性分析

基于二维线弹性理论,应用Hamilton原理,获得Winkler-Pasternak弹性地基梁自由振动的控制微分方程,应用微分求积法(DQM)数值研究了梁自由振动的无量纲频率特性。计算结果与已有的结果(Bernoulli-Euler梁和Timoshenko梁)比较表明,本文的分析方法对弹性地基长梁和短梁自由振动的研究都有效。最后考虑了几何参数对梁频率的影响,以及不同边界条件下地基系数对频率的影响和收敛性。     

压电层合梁静动力学分析的高精度梁单元

给出了一个对复合材料压电层合梁进行数值分析的高精度压电层合梁单元。基于Shi三阶剪切变形板理论的位移场和Layer-wise理论的电势场,用力-电耦合的变分原理及Hamilton原理推导了压电层合梁单元列式。采用拟协调元方法推导了一个可显式给出单元刚度矩阵的两节点压电层合梁单元,并应用于压电层合梁的力-电耦合弯曲和自由振动分析。计算结果表明,该梁单元给出的梁挠度和固有频率与解析解吻合良好,并优于其它梁单元的计算结果,说明了本文所给压电层合梁单元的可靠性和准确性。研究结果可为力-电耦合作用下压电层合梁的力学分析提供一个简单、精确且高效的压电层合梁单元。     

Winkler-Pasternak弹性地基梁自由振动的二维弹性分析Two-dimensional elastic analysis for free vibration of beams set on winkler-pasternak elastic foundations

基于二维线弹性理论,应用Hamilton原理,获得Winkler-Pasternak弹性地基梁自由振动的控制微分方程,应用微分求积法(DQM)数值研究了梁自由振动的无量纲频率特性。计算结果与已有的结果(Bernoulli-Euler梁和Timoshenko梁)比较表明,本文的分析方法对弹性地基长梁和短梁自由振动的研究都有效。最后考虑了几何参数对梁频率的影响,以及不同边界条件下地基系数对频率的影响和收敛性。     

弹性地基上变厚度矩形板自由振动的GDQ法求解

基于广义微分求积法(GDQ法),对弹性地基上变厚度矩形板横向自由振动的控制微分方程及其不同边界条件进行离散,研究了其自由振动的频率特性。数值计算得到了不同长宽比?、不同厚度变化参数?、不同地基参数K条件下以及简支或固定边界条件下弹性地基上变厚度矩形板的量纲为一的振动频率,并与已有文献进行了比较。结果表明:运用广义微分求积法对弹性地基上变厚度矩形板的频率求解结果在退化到K=0时与幂级数解的结果非常吻合;在条件相同的情况下,采用广义微分求积法仅需较少的节点(N=M=13)就能达到满意的求解精度。本文的研究为求解此类问题的低阶、高阶振动频率提供了一种简便有效的数值方法。     

集中载荷作用下梯度复合材料梁的小波-微分求积法分析

将梯度复合材料梁作为平面应力问题处理,采用小波和微分求积混合法,对集中荷载作用下结构的响应进行了分析.考虑材料特性参数沿高度方向呈梯度分布,在该方向上采用广义微分求积法进行离散;鉴于广义微分求积法求解集中荷载问题精度不高的缺点,在梁的长度方向上引入对突变信号敏感的小波插值函数.数值计算表明,小波-微分求积混合法不仅保留了广义微分求积法高效的优点,而且能够很好地模拟结构局部化特征.     

含尺度效应的功能梯度三明治微梁振动、弯曲与屈曲特性研究

基于修正的应变梯度理论和精化的高阶剪切变形理论,提出了一种含尺度效应的功能梯度三明治微梁模型。功能梯度材料的等效弹性参数由Mori-Tanaka均匀化方法描述。针对微梁的高阶边值问题,融合微分求积和Gauss-Lobatto求积准则,建立了一种2节点18自由度的微分求积有限元。通过对比性研究,验证了理论及数值模型的有效性。最后,讨论了边界条件、材料尺度参数、功能梯度指数、长细比、各层厚度比等对功能梯度三明治微梁静动态特性的影响。结果表明,功能梯度三明治微梁的静力响应、振动频率、屈曲荷载以及模态均呈现出显著的尺度效应,所得结果有望为微机电系统中承载器件的设计提供数据积累和方法依据。     

轴向变速运动黏弹性梁稳定性渐近分析和数值验证

研究了轴向变速运动黏弹性梁参数振动的稳定性.对黏弹性本构关系采用物质时间导数,轴向速度用关于恒定平均速度的简单谐波变化来描述.发展浙近摄动法确定稳定性条件.应用微分求积法数值求解简支边界条件下的轴向变速运动黏弹性梁方程,并进而确定次谐波参数共振的稳定性边界.数值结果显示了梁的黏性阻尼和轴向平均速度的影响并验证了次谐波共振的解析结果.     

ANALYSIS OF ELASTO-PLASTIC POSTBUCKLING AND ENERGY RELEASE RATE FOR DELAMINATED FIBER METAL LAMINATED BEAMS IN THERMAL ENVIRONMENT

The elasto-plastic postbuckling of fiber metal laminated beams with delamination and the energy release rate along the delamination front are discussed in this paper. Considering geometrical nonlinearity, thermal environment and geometrical initial imperfection, the incremental nonlinear equilibrium equations of delaminated fiber metal laminated beams are established,which are solved using the differential quadrature method and iterative method. Based on these,according to the J-integral theory, the elasto-plastic energy release rate is studied. The effects of some important parameters on the elasto-plastic postbuckling behavior and energy release rate of the aramid reinforced aluminum laminated beams are discussed in details.     

轴向变速粘弹性Rayleigh梁参数共振稳定性

运用近似解析方法和数值方法研究轴向变速运动黏弹性Rayleigh梁的次谐波共振和组合共振的稳定性区域。基于变分原理,考虑梁断面旋转惯性的影响,推导轴向速度有周期波动的微变形梁横向振动的数学模型;采用多尺度方法建立前两阶次谐波共振和组合共振范围内的参数振动的可解性条件;进而确定梁两端简支边界条件下,因共振而产生的失稳区域;通过微分求积方法求解表征细长Rayleigh梁横向振动的运动微分方程。数值算例分析了黏弹性系数和扭转系数对梁振动失稳区域的影响,将数值仿真结果与近似解析方法的结论进行比较。算例表明:近似解析解的精度较高,第一、第二阶主共振的最大误差分别为3.206%、4.213%。     

A semi-analytical method for free vibration of straight orthotropic beams with rectangular cross-sections

On the basis of the two-dimensional elasticity equations with orthotropy, a semi-analytical method is proposed to analyze free vibration of straight beams with rectangular cross-sections. To this end, the state space method is combined with the differential quadrature method so that state equations with respect to state variables at discrete points are derived. The frequency equation for free vibration of straight orthotropic beams is then formulated. Numerical results are presented and compared with that available in the literature. The present method can be used to analyze either shallow or deep orthotropic beams with arbitrary end conditions.     

Nonlinear Vibration Analysis of Timoshenko Beams Using the Differential Quadrature Method

This paper addresses the large-amplitude free vibration of simplysupported Timoshenko beams with immovable ends. Various nonlineareffects are taken into account in the present formulation and thegoverning differential equations are established based on theHamilton Principle. The differential quadrature method (DQM) isemployed to solve the nonlinear differential equations. Theeffects of nonlinear terms on the frequency of the Timoshenkobeams are discussed in detail. Comparison is made with otheravailable results of the Bernoulli–Euler beams and Timoshenkobeams. It is concluded that the nonlinear term of the axial forceis the dominant factor in the nonlinear vibration of Timoshenkobeams and the nonlinear shear deformation term cannot be neglectedfor short beams, especially for large-amplitude vibrations.     

变截面欧拉梁自由振动分析的重采样微分求积法

采用重采样微分求积法求解了变截面欧拉梁的自由振动问题。推导了变截面梁的控制方程离散格式，采用重采样矩阵方法对边界条件进行处理，给出了变截面梁自由振动算法。采用本文方法对不同类型截面形式和不同边界条件的变截面梁进行自由振动分析，并和其他解法进行比较。计算结果表明，本文方法可以适用于不同变截面类型和不同边界条件，计算精度与解析解吻合良好，具有良好的收敛性能。在同等精度条件下网格点数少于现有计算方法。重采样转换矩阵边界处理方法相比于传统边界处理方法具有更快的收敛性能。     

Free vibration analysis of axially functionally graded tapered Timoshenko beams using differential transformation element method and differential quadrature element method of lowest-order

The present paper investigates the free vibration characteristics of Timoshenko beams whose cross-sectional profile and material properties vary along the beam axis with any arbitrary functions. Free vibration analysis of these beams is carried out through solving the governing differential equations of motion. Since the application of differential transformation method (DTM) does not necessarily converge to satisfactory results, an element-based differential transformation method, namely differential transformation element method (DTEM), is introduced which significantly enhances the accuracy of the results. Furthermore, differential quadrature element of the lowest order (DQEL) is introduced which is based on differential quadrature element method (DQEM). DQEL formulates the problem on the basis of the interpolation of the first differential of the functions; therefore, in contrast with DQEM higher differentials of functions are not employed in DQEL. The competency of DQEL and DTEM in free vibration analysis is verified through several numerical examples. The effects of taper ratio and material non-homogeneity on natural frequencies are investigated.     

Unified two-phase nonlocal formulation for vibration of functionally graded beams resting on nonlocal viscoelastic Winkler-Pasternak foundation

A nonlocal study of the vibration responses of functionally graded (FG) beams supported by a viscoelastic Winkler-Pasternak foundation is presented. The damping responses of both the Winkler and Pasternak layers of the foundation are considered in the formulation, which were not considered in most literature on this subject, and the bending deformation of the beams and the elastic and damping responses of the foundation as nonlocal by uniting the equivalently differential formulation of well-posed strain-driven (ε-D) and stress-driven (σ-D) two-phase local/nonlocal integral models with constitutive constraints are comprehensively considered, which can address both the stiffness softening and toughing effects due to scale reduction. The generalized differential quadrature method (GDQM) is used to solve the complex eigenvalue problem. After verifying the solution procedure, a series of benchmark results for the vibration frequency of different bounded FG beams supported by the foundation are obtained. Subsequently, the effects of the nonlocality of the foundation on the undamped/damping vibration frequency of the beams are examined.     

Thermal buckling and postbuckling of laminated composite beams with temperature-dependent properties

The thermal buckling and postbuckling analysis of laminated composite beams with temperature-dependent material properties is presented. The governing equations are based on the first-order shear deformation beam theory (FSDT) and the geometrical nonlinearity is modeled using Green's strain tensor in conjunction with the von Karman assumptions. The differential quadrature method (DQM) as an accurate, simple and computationally efficient numerical tool is adopted to discretize the governing equations and the related boundary conditions. A direct iterative method is employed to obtain the critical temperature (bifurcation point) as well as the nonlinear equilibrium path (the postbuckling behavior) of symmetrically laminated beams. The applicability, rapid rate of convergence and high accuracy of the method are established via different examples and by comparing the results with those of existing in literature. Then, the effects of temperature dependence of the material properties, boundary conditions, length-to-thickness ratios, number of layers and ply angle on the thermal buckling and postbuckling characteristic of symmetrically laminated beams are investigated.     

Steady-state responses of forced laminated piezoelectric composite beams

The steady-state responses of laminated piezoelectric composite beams subjected to a uniformly distributed load and an electrical potential are investigated by using the state-space-based differential quadrature method. The constraints of the beam considered in the present paper can be any combination of four different kinds of end geometric boundary conditions and two kinds of end electrical boundary conditions. The influence of some material and geometrical parameters such as the thickness ratio and the number of layers on the responses of the beams is discussed. The present solutions are also compared with the numerical results, and a good agreement is found. The static solutions of laminated piezoelectric composite beams can be degenerated from the present steady-state solutions. The results obtained in the present paper are useful and can be applied to design the piezoelectric sensors and actuators in practical applications.