The scattering of harmonic elastic anti-plane shear waves by two collinear cracks in anisotropic material plane by using the non-local theory

In this paper, the dynamic behavior of two collinear cracks in the anisotropic elasticity material plane subjected to the harmonic anti-plane shear waves is investigated by use of the nonlocal theory. To overcome the mathematical difficulties, a one-dimensional nonlocal kernel is used instead of a two-dimensional one for the anti-plane dynamic problem to obtain the stress field near the crack tips. By use of the Fourier transform, the problem can be solved with the help of a pair of triple integral equations, in which the unknown variable is the displacement on the crack surfaces. To solve the triple integral equations, the displacement on the crack surfaces is expanded in a series of Jacobi polynomials. Unlike the classical elasticity solutions, it is found that no stress singularity is present near crack tips. The nonlocal elasticity solutions yield a finite hoop stress at the crack tips, thus allowing us to using the maximum stress as a fracture criterion. The magnitude of the finite stress field not only depends on the crack length but also on the frequency of the incident waves and the lattice parameter of the materials.     

黏弹性体界面裂纹的冲击响应

研究两半无限大黏弹性体界面Griffith裂纹在反平面剪切突出载荷下,裂纹尖端动应力强度因子的时间响应,首先,运用积分变换方法将黏弹性混合黑社会问题化成变换域上的对偶积分方程,通过引入裂纹位错密度函数进一步化成Cauchy型奇异积分方程,运用分片连续函数法数值求解奇异积分方程,得到变换域内的动应力强度因子,再用Laplace积分变换数值反演方法,将变换域的解反演到时间域内,最终求得动应力强度因子的时间响应,并对黏弹性参数的影响进行分析。     

MULTIPLE PARALLEL SYMMETRIC PERMEABLE MODEL-Ⅲ CRACKS IN A PIEZOELECTRIC/PIEZOMAGNETIC COMPOSITE MATERIAL PLANE

In this paper, the interactions of multiple parallel symmetric and permeable finite length cracks in a piezoelectric/piezomagnetic material plane subjected to anti-plane shear stress loading are studied by the Schmidt method.The problem is formulated through Fourier transform into dual integral equations, in which the unknown variables are the displacement jumps across the crack surfaces.To solve the dual integral equations, the displacement jumps across the crack surfaces are directly expanded as a series of Jacobi polynomials.Finally, the relation between the electric field, the magnetic flux field and the stress field near the crack tips is obtained.The results show that the stress, the electric displacement and the magnetic flux intensity factors at the crack tips depend on the length and spacing of the cracks.It is also revealed that the crack shielding effect presents in piezoelectric/piezomagnetic materials.     

Basic solutions of multiple parallel symmetric mode-III cracks in functionally graded piezoelectric/piezomagnetic material plane

The Schmidt method is adopted to investigate the fracture problem of multiple parallel symmetric and permeable finite length mode-III cracks in a functionally graded piezoelectric/piezomagnetic material plane. This problem is formulated into dual integral equations, in which the unknown variables are the displacement jumps across the crack surfaces. In order to obtain the dual integral equations, the displacement jumps across the crack surfaces are directly expanded as a series of Jacobi polynomials. The results show that the stress, the electric displacement, and the magnetic flux intensity factors of cracks depend on the crack length, the functionally graded parameter, and the distance among the multiple parallel cracks. The crack shielding effect is also obviously presented in a functionally graded piezoelectric/piezomagnetic material plane with mul- tiple parallel symmetric mode-III cracks.     

Weight functions for interface cracks in dissimilar anisotropic materials

Bueckner‘s work conjugate integral customarily adopted for linear elastic materials is established for an interface crack in dissimilar anisotropic materials. The difficulties in separating Stroh‘s six complex arguments involved in the integral for the dissimilar materials are overcome and then the explicit function representations of the integral are given and studied in detail. It is found that the pseudo-orthogonal properties of the eigenfunction expansion form (EEF) for a crack presented previously in isotropic elastic cases, in isotopic bimaterial cases, and in orthotropic cases are also valid in the present dissimilar arbitrary anisotropic cases. The relation between Bueckner‘s work conjugate integral and the J-integral in these cases is obtained by introducing a complementary stressdisplacement state. Finally, some useful path-independent integrals and weight functions are proposed for calculating the crack tip parameters such as the stress intensity factors.     

DYNAMIC BEHAVIOR OF TWO PARALLEL SYMMETRY CRACKS IN MAGNETO-ELECTRO-ELASTIC COMPOSITES UNDER HARMONIC ANTI-PLANE WAVES

The dynamic behavior of two parallel symmetry cracks in magneto-electro-elastic composites under harmonic anti-plane shear waves is studied by Schmidt method. By using the Fourier transform, the problem can be solved with a pair of dual integral equations in which the unknown variable is the jumps of the displacements across the crack surfaces. To solve the dual integral equations, the jumps of the displacements across the crack surface were expanded in a series of Jacobi polynomials. The relations among the electric filed, the magnetic flux and the stress field were obtained. From the results, it can be obtained that the singular stresses in piezoelectric/piezomagnetic materials carry the same forms as those in a general elastic material for the dynamic anti-plane shear fracture problem. The shielding effect of two parallel cracks was also discussed.     

Stress intensity factor for a kinked interfacial crack in dissimilar anisotropic materials under antiplane deformation

The asymptotic problem of a kinked interfacial crack in dissimilar anisotropic materials under antiplane deformation is investigated. The linear transformation method for the problem of the anisotropic bimaterial with a straight interface is proposed. The stress intensity factor for the kinked interfacial crack in the anisotropic composite is obtained from the solution of the transformed problem of the kinked interfacial crack in the isotropic bimaterial based on the linear transformation method. The effects of the material parameters as well as the kink angle on the stress intensity factor are discussed from numerical results of the stress intensity factor. The finite element analysis is carried out to verify the stress intensity factor obtained by using the linear transformation. The influence of the material orientations on the stress intensity factor is investigated for the kinked crack in the bimaterial consisting of dissimilar inclined orthotropic materials.     

An Interface Crack for a Functionally Graded Strip Sandwiched Between Two Homogeneous Layers of Finite Thickness

In this paper, the behavior of an interface crack for a functionally graded strip sandwiched between two homogeneous layers of finite thickness subjected to an uniform tension is resolved using a somewhat different approach, named the Schmidt method. The Fourier transform technique is applied and a mixed boundary value problem is reduced to two pairs of dual integral equations in which the unknown variables are the jumps of the displacements across the crack surface. To solve the dual integral equations, the jumps of the displacements across the crack surfaces are expanded in a series of Jacobi polynomials. This process is quite different from those adopted in previous works. Numerical examples are provided to show the effects of the crack length, the thickness of the material layer and the materials constants upon the stress intensity factor of the cracks. It can be obtained that the results of the present paper are the same as ones of the same problem that was solved by the singular integral equation method. As a special case, when the material properties are not continuous through the crack line, an approximate solution of the interface crack problem is also given under the assumption that the effect of the crack surface interference very near the crack tips is negligible. Contrary to the previous solution of the interface crack, it is found that the stress singularities of the present interface crack solution are the same as ones of the ordinary crack in homogenous materials.     

Analysis of vertical cracking phenomena in tensile-strained epitaxial film on a substrate: Part I. Mathematical formulation

This paper presents an analysis of a single vertical crack and periodically distributed vertical cracks in an epitaxial film on a semi-infinite substrate where the cracks penetrate into the substrate. The film and substrate materials have different anisotropic elastic constants, necessitating Stroh formalism in the analysis. The misfit strain due to the lattice mismatch between the film and the substrate serves as the driving force for crack formation. The solution for a dislocation in an anisotropic trimaterial is used as a Green function, so that the cracks are modeled as the continuous distributions of dislocations to yield the singular integral equations of Cauchy-type. The Gauss–Chebyshev quadrature formula is adopted to solve the singular integral equations numerically. Energy arguments provide the critical condition for crack formation, at which the cracks are energetically favorable configurations, in terms of the ratio of the penetration depth into the substrate to the film thickness, the ratio of the spacing of the periodic cracks to the film thickness, and the generalized Dundurs parameters between the film and substrate materials.     

Subinterface crack in an anisotropic piezoelectric bimaterial

In this paper, the problem of a subinterface crack in an anisotropic piezoelectric bimaterial is analyzed. A system of singular integral equations is formulated for general anisotropic piezoelectric bimaterial with kernel functions expressed in complex form. For commonly used transversely isotropic piezoelectric materials, the kernel functions are given in real forms. By considering special properties of one of the bimaterial, various real kernel functions for half-plane problems with mechanical traction-free or displacement-fixed boundary conditions combined with different electric boundary conditions are obtained. Investigations of half-plane piezoelectric solids show that, particularly for the mechanical traction-free problem, the evaluations of the mechanical stress intensity factors (electric displacement intensity factor) under mechanical loadings (electric displacement loading) for coupled mechanical and electric problems may be evaluated directly by considering the corresponding decoupled elastic (electric) problem irrespective of what electric boundary condition is applied on the boundary. However, for the piezoelectric bimaterial problem, purely elastic bimaterial analysis or purely electric bimaterial analysis is inadequate for the determination of the generalized stress intensity factors. Instead, both elastic and electric properties of the bimaterial’s constants should be simultaneously taken into account for better accuracy of the generalized stress intensity factors.     

Isotropic/orthotropic two-layered strips containing cracks terminating at and going through an interface

Crack problems for isotropic/orthotropic two-layered strips have been investigated. A system of two singular integral equations can be derived by using Fourier integral transformation and boundary conditions of crack problems. After stress singularities at crack tips or other special points are determined for internal and edge cracks, and for cracks terminating at and going through the interface, the system of singular integral equations is solved numerically by Gauss-Jacobi or Gauss-Chebyshev integration formulas for stress intensity factors at the tips and other singular points of cracks. Finally, possible crack growth behavior for cracks approaching and going through the interface is discussed.     

Interactions of multiple parallel symmetric permeable mode-III cracks in a piezoelectric material plane

In this paper, the interactions of multiple parallel symmetric and permeable finite length cracks in a piezoelectric material plane subjected to anti-plane shear stress loading were studied by the Schmidt method. The problem was formulated through Fourier transform into dual integral equations, in which the unknown variables are the jumps of displacements across the crack surfaces. To solve the dual integral equations, the jumps of displacements across the crack surfaces were directly expanded as a series of Jacobi polynomials. Finally, the relation between the electric field and the stress field near the crack tips was obtained. The results show that the stress and the electric displacement intensity factors at the crack tips depend on the lengths and spacing of the cracks. It is also revealed that the crack shielding effect presents in piezoelectric materials.     

INVESTIGATION OF ANTI-PLANE SHEAR BEHAVIOR OF TWO COLLINEAR CRACKS IN PIEZOELECTRIC MATERIALS BY A NEW METHOD

In this paper, the interaction between two collinear cracks in piezoelectric materials under anti-plane shear loading was investigated for the impermeable crack face conditions. By using the Fourier transform, the problem can be solved with two pairs of triple integral equations. These equations are solved using Schmidt's method. This process is quite different from that adopted previously. This study makes it possible to understand the two collinear cracks interaction in piezoelectric materials. The authors are grateful for financial support from the Post-Doctoral Science Foundation and the Natural Science Foundation of Heilongjiang Province.     

THE BEHAVIOR OF TWO PARALLEL SYMMETRIC PERMEABLE CRACKS IN PIEZOELECTRIC MATERIALS

ＩｎｔｒｏｄｕｃｔｉｏｎＩｔｉｓｗｅｌｌ＿ｋｎｏｗｎｔｈａｔｐｉｅｚｏｅｌｅｃｔｒｉｃｍａｔｅｒｉａｌｓｐｒｏｄｕｃｅａｎｅｌｅｃｔｒｉｃｆｉｅｌｄｗｈｅｎｄｅｆｏｒｍｅｄａｎｄｕｎｄｅｒｇｏｄｅｆｏｒｍａｔｉｏｎｗｈｅｎｓｕｂｊｅｃｔｅｄｔｏａｎｅｌｅｃｔｒｉｃｆｉｅｌｄ .Ｔｈｅｃｏｕｐｌｉｎｇｎａｔｕｒｅｏｆｐｉｅｚｏｅｌｅｃｔｒｉｃｍａｔｅｒｉａｌｓｈａｓａｔｔｒａｃｔｅｄｗｉｄｅａｐｐｌｉｃａｔｉｏｎｓｉｎｅｌｅｃｔｒｉｃ＿ｍｅｃｈａｎｉｃａｌａｎｄｅｌｅｃｔｒｉｃｄｅｖｉｃｅｓ,ｓｕｃ…     

Basic solution of two parallel mode-I permeable cracks in functionally graded piezoelectric materials

The basic solution of two parallel mode-I permeable cracks in functionally graded piezoelectric materials was studied in this paper using the generalized Almansi’s theorem. To make the analysis tractable, it was assumed that the shear modulus varies exponentially along the horizontal axis parallel to the crack. The problem was formulated through a Fourier transform into two pairs of dual integral equations, in which unknown variables are jumps of displacements across the crack surface. To solve the dual integral equations, the jumps of displacements across the crack surfaces were directly expanded as a series of Jacobi polynomials. The solution of the present paper shows that the singular stresses and the singular electric displacements at the crack tips in functionally graded piezoelectric materials carry the same forms as those in homogeneous piezoelectric materials; however, the magnitudes of intensity factors depend on the gradient of functionally graded piezoelectric material properties. It was also revealed that the crack shielding effect is also present in functionally graded piezoelectric materials.     

折线裂纹和两相材料界面的相互作用

利用螺位错基本解建立了和界面相交的折线裂纹的Cauchy型积分方程，根据奇异积分方程理论，得出了确定折线裂纹和界面交点处的奇性应力指数的特征方程，以及交点处各角形域内的奇性应力，利用所得的交点处的奇性应力定义了折线裂纹和界面交点处的应力强度因子，对所得积分方程进行数值求解，可得裂纹端点以及裂纹和界面交点处的应力强度因子。     

Weakly-singular,weak-form integral equations for cracks in three-dimensional anisotropic media

Singularity-reduced integral relations are developed for displacement discontinuities in three-dimensional, anisotropic linearly elastic media. An isolated displacement discontinuity is considered first, and a systematic procedure is followed to develop relations for the displacement and stress fields induced by the discontinuity. The singularity-reduced relation for the stress is particularly important since it is in a form which allows a weakly-singular, weak-form traction integral equation to be readily established. The integral relations obtained for a general displacement discontinuity are then specialized to an isolated crack and to dislocations; the relations for dislocations are introduced to emphasize their direct connection to corresponding results for cracks and to allow earlier independent findings for these two types of discontinuities to be put into proper context. Next, the singularity-reduced integral equations obtained for an isolated crack are extended to allow treatment of cracks in a finite domain, and a pair of weakly-singular, weak-form displacement and traction integral equations is established. These integral equations can be combined to obtain a final formulation which is in a symmetric form, and in this way they serve as the basis for a weakly-singular, symmetric Galerkin boundary element method suitable for analysis of cracks in anisotropic media.     

Nonlocal theory solution of two collinear cracks in the functionally graded materials

In this paper, the interaction of two collinear cracks in functionally graded materials subjected to a uniform anti-plane shear loading is investigated by means of nonlocal theory. The traditional concepts of the nonlocal theory are extended to solve the fracture problem of functionally graded materials. To make the analysis tractable, it is assumed that the shear modulus varies exponentially with the coordinate vertical to the crack. By use of the Fourier transform, the problem can be solved with the help of a pair of triple integral equations, in which the unknown variable is the displacement on the crack surfaces. To solve the triple integral equations, the displacement on the crack surfaces is expanded in a series of Jacobi polynomials. Unlike the classical elasticity solutions, it is found that no stress singularity is present near the crack tips. The nonlocal elastic solutions yield a finite hoop stress at the crack tip, thus allowing us to use the maximum stress as a fracture criterion in functionally graded materials. The magnitude of the finite stress field depends on the crack length, the distance between two cracks, the parameter describing the functionally graded materials and the lattice parameter of the materials.     

The interaction of two parallel Mode-I limited-permeable cracks in a functionally graded piezoelectric material

In this paper, the interaction of two parallel Mode-I limited-permeable cracks in a functionally graded piezoelectric material was investigated by using the generalized Almansi's theorem. In the analysis, the electric permittivity of the air inside the crack was considered. The problem was formulated through Fourier transform into two pairs of dual integral equations, in which unknown variables are jumps of displacements across the crack surface. To solve the dual integral equations, the jumps of displacements across the crack surfaces were directly expanded as a series of Jacobi polynomials. The solution of the present paper shows that the singular stresses and the singular electric displacements at the crack tips in functionally graded piezoelectric materials carry the same forms as those in homogeneous piezoelectric materials; however, the magnitudes of intensity factors depend on the electric permittivity of the air inside the crack and the gradient parameter of functionally graded piezoelectric material properties. It was also revealed that the crack shielding effect is also present in functionally graded piezoelectric materials.     

Investigation of the behavior of a griffith crack at the interface between two dissimilar orthotropic elastic half-planes for the opening crack mode

The behaviors of an interface crack between dissimilar orthotropic elastic halfplanes subjected to uniform tension was reworked by use of the Schmidt method. By use of the Fourier transform, the problem can be solved with the help of two pairs of dual integral equations, of which the unknown variables are the jumps of the displacements across the crack surfaces. Numerical examples are provided for the stress intensity factors of the cracks. Contrary to the previous solution of the interface crack, it is found that the stress singularity of the present interface crack solution is of the same nature as that for the ordinary crack in homogeneous materials. When the materials from the two half planes are the same, an exact solution can be otained.