首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 125 毫秒
1.
孙穆 《力学季刊》1999,20(3):283-290
对深基坑围护结构采用简化的;空间计算模型,即土体按平面问题分析,围护支撑结构空间问题分析。计算程序使用三维杆系有限元分析,在程序中设置了子结构模块,并为计算程序配置了前后处理程序,可在586微机上运算多道内支撑的大型深基坑。  相似文献   

2.
板片空间结构是由轻质、高强的复合板材和薄壁金属骨架或完全由板通过特定方式组合而成的一种新型空间结构体系.为研究适用于设计的理论,需要进行大规模参数化分析,因此需要适用于此分析的可行的建模方法.分析板片空间结构构件的几何拓展规律,将球面坐标系和直角坐标系结合,运用APDL语言,编制相应的建模和分析模块程序,实现了板片空间结构的参数化建模,为对板片空间结构的大规模参数化分析提供工具.并分析了板片空间结构与网壳结构的异同,将两者的建模程序相组合,实现同一程序下的两种结构的自动建模.同时运用本文所提出的建模思路可以实现大部分空间网架结构的参数化建模.  相似文献   

3.
线弹性幂强化材料平面杆系弹塑性分析的数值解   总被引:4,自引:0,他引:4  
各杆任意铰接在一个刚体上的平面杆系是一种比较复杂的杆系结构,某些其它类型的平面杆系常常可以看作是它的特例。本文将材料的本构关系描述为线性幂强化形式,推导出了该类平面杆系结构弹塑性分析的普遍表达式,编制了通用程序,使这一类问题有了一个通用的解题方法。  相似文献   

4.
基于广义可靠性的随机模糊杆系结构优化设计   总被引:3,自引:0,他引:3  
研究了随机参数杆系结构的广义可靠性优化设计问题。导出了随机荷载作用下以模糊许用值为条件的结构广义可靠度计算公式;建立了以杆截面为设计变量、结构重量均值为目标函数、结构模糊位移和单元模糊强度广义可靠度为约束条件的优化数学模型;通过引入罚函数,将原广义可靠性约束优化问题转化为无约束优化问题,利用遗传算法求解。设计结果表明:文中提出的模型和计算公式是可行有效的。  相似文献   

5.
结构信息熵与极大熵原理   总被引:12,自引:0,他引:12  
文中首先从数学上证明了由结构应变能描述的信息熵是定义在凸集上的凸函数;又以静定杆系结构为对象,论证并讨论了极大熵原理。最后通过对静定与静不定杆系结构的数值模拟,揭示了结构的熵函数与杆系截面积之间的关系。  相似文献   

6.
本文发展了具有任意连接和约束的空间杆系结构静力分析的回传波矩阵法。以杆端位移和转角为基本未知量,通过结构所有节点的平衡方程和位移协调条件,推导出传递分配矩阵和载荷源向量,并进一步利用设定的同一杆件两个局部坐标系下杆端位移之间的关系,最终得到结构的回传矩阵。据此可求出结构所有杆件的杆端位移及杆端内力。对不同的杆件连接形式,如刚接、铰接、半刚接,以及不同的约束情况,如固定支座、铰支座、定向支座等,本文推导出了空间杆系结构的回传波矩阵表达式,可直接用于相应空间杆系结构内力的计算。同时,针对一个具体刚架结构进行了算例分析,并通过与弯矩分配法和有限元结果的比较,验证了本文方法的精确度。  相似文献   

7.
由于结构中弹性波传播的复杂性,其场量(位移、应变、速度)表达式往往为繁杂、冗长的数学表达式,表达式本身不能直观、形象地表征结构中弹性波的传播特征.本文以杆中纵波传播为例,基于Matlab开发了弹性波传播特征的可视化程序,将杆中纵波传播特性以一种动态、直观、形象的形式展现出来.  相似文献   

8.
推导出含有全铰节点的三维杆系结构的回传波射矩阵表达式,完善了具有任意连接和约束的空间杆系结构静力分析的回传波矩阵法.基于节点平衡方程和协调方程,推导出表达杆件近端位移和远端位移关系的传递分配矩阵及载荷源向量,并通过由对偶坐标系下近端位移和远端位移的关系获得结构的总体相位矩阵,再引入转列矩阵,进而推导出结构的回传波射矩阵,在此基础上求解以杆端位移为基本未知量的线性方程组,最终得到精确确定所有杆件的杆端位移及杆端内力的矩阵列式.给出了空间杆系结构算例分析,与有限元结果比较,验证了回传波射矩阵法的计算精度.  相似文献   

9.
本文将杆、膜结构优化设计中处理位移和应力约束的公式推广为后者适用于频率等多种约束以及梁、板等多种单元构成的混合结构的优化设计,数值例子表明公式具有较高的精度,从而提高了结构优化设计的效率,方便了程序的编制。  相似文献   

10.
薄壁杆系结构的梁元分析模型   总被引:1,自引:0,他引:1  
本文导出了用于薄壁杆系结构弹性分析的薄壁梁元分析模型,在空间梁元分析模型^[3]的基础上,采用了一种改进的位移模式,考察了薄壁杆件可能发生的拉压,剪切,弯曲,扭转和翘曲等各变形形式以及它们的耦合效应,得出了相应的单元形函数,同时从工程应变的定义出发,采用Taylor级数展开的方法,建立了单元的五阶近似正交变表达式,并建立了相应的薄壁单元刚度方程,从而得出了局部坐标系下单元刚度矩阵的显式,根据本文所导出的薄壁梁元分析模型,编制了相应的结构计算程序,通过算例验证了本文所推导的单元刚度矩阵,同时通过与传统空间梁元计算模型计算结果的比较,阐述了截面翘曲对薄壁杆系结构的影响。  相似文献   

11.
Although the genetic algorithm (GA) for structural optimization is very robust, it is very computationally intensive and hence slower than optimality criteria and mathematical programming methods. To speed up the design process, the authors present an adaptive reanalysis method for GA and its applications in the optimal design of trusses. This reanalysis technique is primarily derived from the Kirsch's combined approximations method. An iteration scheme is adopted to adaptively determine the number of basis vectors at every generation. In order to illustrate this method, three classical examples of optimal truss design are used to validate the proposed reanalysis-based design procedure. The presented numerical results demonstrate that the adaptive reanalysis technique affects very slightly the accuracy of the optimal solutions and does accelerate the design process, especially for large-scale structures.  相似文献   

12.
On the basis of the concept of finite element methods, the rigorous analytical solutions of structural response in terms of the design variables are researched in this paper. The spatial trusses are taken as an example for the solution of the analytical expressions of the explicit displacements which are proved mathematically; then some conclusions are reached that are useful to structural sensitivity analysis and optimization. In the third part of the paper, a generalized geometric programming method is sugguested for the optimal model with the explicit displacement. Finally, the analytical solutions of the displacements of three trusses are given as examples.  相似文献   

13.
Abstract

This paper considers the problem of finding member sizes which minimize the weight of a pin-jointed truss of fixed geometry while satisfying constraints upon joint displacements, member stresses, and minimum sizes. Aspects of both mathematical programming methods and optimality criteria methods for designing large trusses are discussed. The optimality criteria approach is further extended and the whole truss design problem is recast into a new dual formulation in which constraint activity levels are used as variables in a mathematical programming solution method. This new dual formulation unifies both the optimality criteria and mathematical programming approaches to the problem of truss design. The paper is theoretical in nature, being largely devoted to a proof of the dual method. A discussion of the likely implications and usefulness of the dual approach to truss design is given with comments upon its possible modes of practical use.  相似文献   

14.
基于文(1)所建立的拉索式予应力钢桁架基本计算,根据矩阵摄动原理进一步给出了以竖向为位移为约束反演确定任意布索张拉予应力钢桁架单元刚度和的索刚度的摄动迭代公式。算例表明,该方法具有较高的精度,可满足工程设计需要。  相似文献   

15.
星载数据管理系统的共模故障分析方法   总被引:1,自引:0,他引:1  
数据管理系统是低能X射线望远镜进行数据传输和数据处理的关键电路模块,为提高可靠性采用冷贮备冗余设计,但冗余设计会引入由共模故障引起的失效。因此,结合空间应用的环境,在对低能X射线望远镜的数据管理系统的故障树分析的基础上,对其进行共模故障方法的研究。首先,针对数据管理系统进行传统故障树的构建;其次,确定数据管理系统的共模故障分析对象,分析共模故障产生的原因及机理;再次,对数据管理系统进行共模故障定量分析;最后,通过对比考虑共模故障和未考虑共模故障的定量结果,提出改进设计措施。通过对数据管理系统进行共模故障定性和定量分析,找出引起发生共模故障的主要原因,并提出改进措施,提高了星载数据管理系统的可靠性。  相似文献   

16.
一种桁架结构智能生成与分析系统   总被引:1,自引:0,他引:1  
建立了桁架结构的智能生成与分析系统,可以自动完成桁架结构的布局选型、 拓扑生成以及分析计算等系列过程. 主要通过结点布置和有选择的杆件连接实现结构的布局 选型,采用拓扑变化法完成结构的自动生成,并利用基内力阵进行结构的分析计算. 经算例 分析表明,该系统性能良好,使用方便,具有智能、自适应的特点,是辅助完成结构拓扑和 布局优化设计的有力工具之一.  相似文献   

17.
ABSTRACT

Solutions to engineering design problems formulated as nonlinear programming (NLP) problems usually require the use of more than one optimization technique. Moreover, the interaction between the user (analysis/synthesis) program and the NLP system can lead to interface, scaling, or convergence problems. An NLP solution system is presented that seeks to solve these problems by providing a programming system to ease the user-system interface. A simple set of rules is used to select an optimization technique or to switch from one technique to another in an attempt to detect, diagnose, and solve some potential problems. Numerical examples involving finite element based optimal design of space trusses and rotor bearing systems are used to illustrate the applicability of the proposed methodology.  相似文献   

18.
针对有限元计算规模日益增大,应用领域不断扩展的设计需求,设计并实现了具有开放性的通用可视化系统,目标是面向百万/千万节点以上的超大规模有限元的计算可视化。在软件框架设计方面,引入流式体系结构,该体系结构具有高效计算和高效通信特性,满足大规模数据处理需求。在软件实现方面,采用工厂方法设计模式和插件技术,提高了系统的可扩展性和灵活性。设计并实现了有限元模型、渲染器和过滤器等模块。在大规模数据可视化方面,提出模型数据、结果数据的设计方案和管理机制,并采用VBO和分批载入技术,实现了超大规模模型的实时显示功能。通过多个模型实例展示了该系统的可行性与优越性。  相似文献   

19.
基于ICM方法的刚架拓扑优化   总被引:14,自引:0,他引:14  
将ICM(独立、连续、映射)优化方法应用于刚架结构,建立了以重量为目标函数、考虑多工况下应力和位移约束的刚架结构拓扑优化模型。借助于磨光函数和过滤函数,实现了离散变量和连续变量之间的相互转换。考虑多工况应力拓扑解之间、应力和位移约束下拓扑解之间的协调,得到了合理的结果。文中给出的刚架结构拓扑优化算例表明,刚架结构的拓扑结构不同于桁架或连续体。  相似文献   

20.
This paper is concerned with the optimum design and sensitivity analysis methods of piezoelectric intelligent trusses on the structural stiffness and free-vibration frequency. On the basis of the finite element method and taking into account the mechanical-electric coupling effect under electric load and mechanical load, the computational formula of sensitivities of structural displacement and free-vibration frequency with respect to the size and shape design variables are proposed. A new kind of design variable of the electric voltage and the calculating method of displacement sensitivity with respect to the electric voltage variable is presented. The new method for structural deformation control by optimizing the voltages of piezoelectric active bars is given. The numerical methods of optimum design and sensitivity analysis for piezoelectric truss structures are implemented in JIFEX software. Numerical examples demonstrate the effectiveness of the methods and the program. Project supported by the Special Funds for National Key Basic Research of China (No. G1999032805) and the Foundation for University Key Teachers by the Ministry of Education of China.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号