共查询到19条相似文献,搜索用时 109 毫秒
1.
非结构混合网格高超声速绕流与磁场干扰数值模拟 总被引:2,自引:0,他引:2
对均匀磁场干扰下的二维钝头体无粘高超声速流场进行了基于非结构混合网格的数值模拟.受磁流体力学方程组高度非线性的影响及考虑到数值模拟格式的精度,目前在此类流场的数值模拟中大多使用结构网格及有限差分方法,因而在三维复杂外形及复杂流场方面的研究受到限制.本文主要探索使用非结构网格(含混合网格)技术时的数值模拟方法.控制方程为耦合了Maxwell方程及无粘流体力学方程的磁流体力学方程组,数值离散格式采用Jameson有限体积格心格式,5步Runge-Kutta显式时间推进.计算模型为二维钝头体,初始磁场均匀分布.对不同磁感应强度影响下的高超声速流场进行了数值模拟,并与有限的资料进行了对比,得到了较符合的结果. 相似文献
2.
高超声速气动热环境的数值计算对算法和网格的敏感度极高. 随着高超声速飞行器外形日益复杂, 生成高质量的结构网格时间成本呈指数增加, 难以满足工程应用的需求. 非结构/混合网格因具有很强的复杂外形适应能力, 为了缩短任务周期, 有必要在非结构/混合网格上开展高精度的气动热环境数值计算方法研究. 梯度重构方法是影响非结构/混合网格热流计算精度的重要因素之一. 本文通过引入多维梯度重构方法, 发展了基于常规的非结构/混合网格的高精度热流计算方法, 对典型的高超声速Benchmark算例(二维圆柱)进行了模拟, 并与气动力计算广泛采用的Green-Gauss类方法和最小二乘类方法进行了对比. 计算结果表明, 多维梯度重构方法能有效提高非结构/混合网格热流预测精度, 其鲁棒性和收敛性更好. 最后将多维梯度重构方法应用于常规混合网格的三维圆柱和三维双椭球绕流问题, 得到了与实验值吻合较好的热流计算结果, 展现了良好的应用前景. 相似文献
3.
高超声速气动热环境的数值计算对算法和网格的敏感度极高.随着高超声速飞行器外形日益复杂,生成高质量的结构网格时间成本呈指数增加,难以满足工程应用的需求.非结构/混合网格因具有很强的复杂外形适应能力,为了缩短任务周期,有必要在非结构/混合网格上开展高精度的气动热环境数值计算方法研究.梯度重构方法是影响非结构/混合网格热流计算精度的重要因素之一.本文通过引入多维梯度重构方法,发展了基于常规的非结构/混合网格的高精度热流计算方法,对典型的高超声速Benchmark算例(二维圆柱)进行了模拟,并与气动力计算广泛采用的Green-Gauss类方法和最小二乘类方法进行了对比.计算结果表明,多维梯度重构方法能有效提高非结构/混合网格热流预测精度,其鲁棒性和收敛性更好.最后将多维梯度重构方法应用于常规混合网格的三维圆柱和三维双椭球绕流问题,得到了与实验值吻合较好的热流计算结果,展现了良好的应用前景. 相似文献
4.
将计算量小,激波分辨率高的AUFS(artificially upstream flux vector splitting)格式应用于无网格方法.所发展算法基于多项式基函数最小二乘无网格方法,采用线性基函数曲面拟合及AUFS格式计算各离散点的空间导数,应用四阶Runge--Kutta法进行时间显式推进.为验证算法健壮性、精度以及计算效率,对Riemann问题、超音速平面流动,以及不同攻角NACA0012翼型跨音速流场进行了数值模拟,其结果同采用HLLC(Harten-Lax-van Leer-contact)格式的无网格方法以及文献报道结果吻合较好,并且计算量较形式简单HLLC格式减少约15%. 相似文献
5.
AUFS 格式在无网格方法中的应用简 总被引:1,自引:0,他引:1
将计算量小,激波分辨率高的AUFS (artificially upstream flux vector splitting) 格式应用于无网格方法. 所发展算法基于多项式基函数最小二乘无网格方法,采用线性基函数曲面拟合及AUFS 格式计算各离散点的空间导数,应用四阶Runge-Kutta 法进行时间显式推进. 为验证算法健壮性、精度以及计算效率,对Riemann 问题、超音速平面流动,以及不同攻角NACA0012 翼型跨音速流场进行了数值模拟,其结果同采用HLLC (Harten-Lax-van Leer-contact) 格式的无网格方法以及文献报道结果吻合较好,并且计算量较形式简单HLLC 格式减少约15%. 相似文献
6.
7.
计算含动边界非定常流动的无网格算法 总被引:1,自引:0,他引:1
在无网格算法中考虑了含动边界的流动问题,研究了可以计算处理包含一定位移及扭转动边界非定常流动的算法.创建了无网格算法的动点法则,并引入抗扭方法对弹簧方法进行改进来处理离散点运动,提高了方法的可用度及精度.发展了求解基于无网格的ALE方程组的算法,在点云离散的基础上采用曲面逼近计算空间导数及HLLC格式计算数值通量,运用四步龙格-库塔法进行时间推进.在跨、超音速条件下,计算模拟了典型翼型简谐振动流场,计算结果与实验结果及文献对比吻合,验证了该算法的正确性. 相似文献
8.
侧向多喷口干扰复杂流动数值模拟研究 总被引:3,自引:0,他引:3
采用具有高分辨率的NND格式,通过数值求解N-S方程对典型外形多喷口侧向喷流复杂干扰流动进行了数值模拟. 为了提高计算效率,采用了LU-SGS隐式算法. 采用分块对接网格技术,生成高质量的贴体计算网格,精确模拟喷口截面. 对比分析了不同计算格式、限制器形式、网格拓扑及流动形态(层流与湍流)对喷流干扰流场结构和压力分布特性的影响,研究和分析了喷口附近流场的涡系结构、波系结构和喷流干扰引起的气动力特性. 在上述研究的基础上,针对典型飞行器外形的侧向喷流干扰特性进行了详细的数值模拟,得到了喷口参数(喷口位置、数目等)及来流条件对喷流干扰流场结构、气动力特性的影响规律,并对其流动机理进行了相应的分析. 研究表明,发展的针对多喷口侧喷干扰的数值计算方法是成功的,可以应用于飞行器侧向喷流干扰的流场结构分析及气动力特性数值预测. 相似文献
9.
10.
基于ALE方法的3D充填流动模拟 总被引:1,自引:1,他引:0
基于任意拉格朗日-欧拉方法发展了三维充填流动的数值模拟方案.该方案采用ALE方法准确地追踪移动自由面的位置并避免了网格扭曲;基于移动最小二乘曲面拟合方法提出了移动自由面上网格节点重定位方法,将充填流动的网格更新过程简化为自由面附近的局部网格重划分过程,并通过分级多面体三角剖分实现,减小了网格划分的计算量,实现了实时网格生成.给出的数值算例结果表明了该数值模型对三维充填流动模拟的有效性. 相似文献
11.
A fractional step method for the solution of the steady state incompressible Navier–Stokes equations is proposed in this paper in conjunction with a meshless method, named discrete least‐squares meshless (DLSM). The proposed fractional step method is a first‐order accurate scheme, named semi‐incremental fractional step method, which is a general form of the previous first‐order fractional step methods, i.e. non‐incremental and incremental schemes. One of the most important advantages of the proposed scheme is its capability to use large time step sizes for the solution of incompressible Navier–Stokes equations. DLSM method uses moving least‐squares shape functions for function approximation and discrete least‐squares technique for discretization of the governing differential equations and their boundary conditions. As there is no need for a background mesh, the DLSM method can be called a truly meshless method and enjoys symmetric and positive‐definite properties. Several numerical examples are used to demonstrate the ability and the efficiency of the proposed scheme and the discrete least‐squares meshless method. The results are shown to compare favorably with those of the previously published works. Copyright © 2010 John Wiley & Sons, Ltd. 相似文献
12.
13.
无网格局部Petrov-Galerkin方法在弹塑性断裂力学问题中的应用 总被引:2,自引:0,他引:2
采用无网格局部Petroy-Galerkin方法来分析弹塑性断裂力学问题.这种无网格方法采用移动最小二乘法(MLS)来构造近似试函数和采用Heaviside函数作为加权残值法中的权函数,由于近似函数不满足KroneckerDelta条件,因此采用直接插值法来施加本质边界条件.如果不考虑体力,所形成的整体刚度矩阵只包含局部边界积分,而不包含局部域积分和奇异积分.采用增量Newton-Raphson迭代法来求解弹塑性增量形式的局部Petrov-Galerkin方程.数值算例结果表明,该文方法对于弹塑性断裂力学问题的求解是可行的和有效的,并且所得到的结果具有较好的精度. 相似文献
14.
15.
无网格局部强弱法求解不规则域问题 总被引:6,自引:5,他引:1
无网格局部彼得洛夫-伽辽金(meshless local Petrov-Galerkin,MLPG)法是一种具有代表性的无网格方法,在计算力学领域得到广泛应用.然而,这种方法在边界上需执行积分运算,通常很难处理不规则求解域问题.为了克服MLPG法的这种局限性,提出了无网格局部强弱(meshless local strong-weak,MLSW)法.MLSW法采用MLPG法离散内部求解域,采用无网格介点(meshless intervention-point,MIP)法施加自然边界条件,并采用配点法施加本质边界条件,避免执行边界积分运算,可适用于求解各类复杂的不规则域问题.从理论上讲,这种结合式方法,既保持了MLPG法稳定而精确计算的优势,同时兼备配点型方法在处理复杂结构问题时简洁而灵活的优势,实现了弱式法和强式法的优势互补.此外,MLSW法采用移动最小二乘核(moving least squares core,MLSc)近似法来构造形函数,是对传统移动最小二乘(moving least squares,MLS)近似法的一种改进.MLSc使用核基函数代替通常的基函数,有利于数值求解的精确性和稳定性,而且其导数近似计算变得更为简单.数值算例结果初步表明:这种新方法实施简单,求解稳定、精确,表现出适合工程运用的潜力. 相似文献
16.
We present a grid‐free or meshless approximation called the kinetic meshless method (KMM), for the numerical solution of hyperbolic conservation laws that can be obtained by taking moments of a Boltzmann‐type transport equation. The meshless formulation requires the domain discretization to have very little topological information; a distribution of points in the domain together with local connectivity information is sufficient. For each node, the connectivity consists of a set of nearby nodes which are used to evaluate the spatial derivatives appearing in the conservation law. The derivatives are obtained using a modified form of the least‐squares approximation. The method is applied to the Euler equations for inviscid flow and results are presented for some 2‐D problems. The ability of the new scheme to accurately compute inviscid flows is clearly demonstrated, including good shock capturing ability. Comparisons with other grid‐free methods are made showing some advantages of the current approach. Copyright © 2007 John Wiley & Sons, Ltd. 相似文献
17.
18.
The finite point method (FPM) is a meshless technique, which is based on both, a weighted least‐squares numerical approximation on local clouds of points and a collocation technique which allows obtaining the discrete system of equations. The research work we present is part of a broader investigation into the capabilities of the FPM to deal with 3D applications concerning real compressible fluid flow problems. In the first part of this work, the upwind‐biased scheme employed for solving the flow equations is described. Secondly, with the aim of exploiting the meshless capabilities, an h‐adaptive methodology for 2D and 3D compressible flow calculations is developed. This adaptive technique applies a solution‐based indicator in order to identify local clouds where new points should be inserted in or existing points could be safely removed from the computational domain. The flow solver and the adaptive procedure have been evaluated and the results are encouraging. Several numerical examples are provided in order to illustrate the good performance of the numerical methods presented. Copyright © 2008 John Wiley & Sons, Ltd. 相似文献
19.
In the recent decade, the meshless methods have been handled for solving most of PDEs due to easiness of the meshless methods. One of the popular meshless methods is the element-free Galerkin (EFG) method that was first proposed for solving some problems in the solid mechanics. The test and trial functions of the EFG are based on the special basis. Recently, some modifications have been developed to improve the EFG method. One of these improvements is the variational multiscale EFG procedure. In the current article, the shape functions of interpolation moving least squares approximation have been applied to the variational multiscale EFG technique for solving the incompressible magnetohydrodynamics flow. In order to reduce the elapsed CPU time of simulation, we employ a reduced-order model based on the proper orthogonal decomposition technique. The current combination can be referred to as the reduced-order variational multiscale EFG technique. To illustrate the reduction in CPU time used as well as the efficiency of the proposed method, we applied it for the two-dimensional cases. 相似文献