翼型大攻角状态下表面吸气驻涡增升的数值模拟实验

用数值模拟方法给出了翼型大攻角状态表面吸气后绕翼型流动的某些新现象并对流场的特性进行了机理性研究,其中包括吸气对翼型背风面分离涡的驻涡增升作用;吸气孔位置对流场的影响;不同吸气强度以及间歇式吸气的增升效应。数值模拟的出发方程为N-S方程,差分格式为Beam-Warming格式。数值实验表明:(1)吸气可有效地提高翼型大攻角状态下的升力;(2)在一定吸气强度下吸气可使翼型背风面上涡的非定常脱落现象消失从而起到驻涡作用;(3)吸气孔位置在翼面的中部附近增升效果较好;(4)在一定范围内吸气强度越强其升力越高;(5)间歇式吸气也可提高平均升力,但引起升力的波动。     

三维大钝头体简谐振动绕流的数值模拟

用数值模拟方法研究了大钝头体外形（双子星座飞船）在超声速下俯仰振动的绕流特性，数值模拟的出发方程为三维全Ｎ－Ｓ方程，格式为二阶迎风ＴＶＤ格式，研究结果给出了物体在俯仰振动过程中激波、分离结构和物面压力分布等非定常特征。     

一种改进混合迎风格式在翼型流场激波捕捉中的应用

波阻是飞行器超音速飞行的关键设计因素,精确捕捉激波在流场中的位置,是数值模拟含激波流场和精确计算波阻的一个重要研究内容.本文基于网格节点有限体积空间离散方法,采用AUSM格式与FVS格式的混合格式(MAUSM方法)计算对流通量,从而抑制在数值模拟流场出现的激波处振荡和过冲现象,确保AUSM准确捕获接触间断的特性和FVS格式捕捉激波的能力.本文使用MAUSM方法分别计算了在跨声速和超声速条件下的NACA0012翼型流场,并与中心差分格式的计算结果进行比较.结果表明,对于存在激波的翼型流场,MAUSM方法是有效的.     

多段翼型吹气流动分离控制研究

基于雷诺平均Navier-Stokes粘性流动方程,采用数值模拟方法,分析了吹气控制对多段翼型气动性能的影响,阐述了吹气改善多段翼型流动的机理。采用有限体积法对雷诺平均Navier-Stokes方程进行空间离散,时间方向推进采用二阶迎风格式,湍流模型采用SST k-ω模型。结果表明:在多段翼型基础上采取吹气控制可以获得很好的气动增升效果,三段翼型的最大升力系数可达4.98;吹气可改善多段翼型表面流动,减小其流动分离,增加升力;在同样的吹气口几何参数条件下,在一定范围内增大吹气动量系数可以提高多段翼型的升力系数;在多段翼型主翼后段和襟翼同时施加吹气流动控制可以获得更好的效果,升力系数比基本三段翼型(基本构型A)增加30.05%。     

对称翼型低雷诺数小攻角升力系数非线性现象研究

采用Rogers发展的三阶Roe格式,求解非定常不可压N-S方程,时间方向为二阶精度双时间步方法, 数值模拟了对称翼型SD8020低雷诺数(Re=40000,100000)条件下,流场层流分离涡结构和升力系数随攻角的变化．同试验比较证明了数值模拟的正确性．通过对数值模拟时均化流场结果的详细分析,发现对称翼型在小雷诺数0°攻角附近出现的层流分离泡,其内部结构和演化规律都不同于经典层流分离泡模型,从而提出了一种后缘层流分离泡模型．并应用该模型对对称翼型小攻角低雷诺数流场特性以及升力系数非线性效应的形成机理进行了研究和解释．     

数值研究激波与旋涡的相互作用

从非定常形式的Euler方程出发,数值模拟了运动激波与旋涡相互作用的非定常流动过程。为保证激波具有较高的分辨率,采用对称型TVD格式进行了数值计算。结果表明。这样可以有效地模拟流场中一些复杂的流动现象,如激波变形、激波分叉和三波点的形成,以及旋涡结构的变化过程等,并与已有的实验流动显示相符良好。同时,也是对TVD格式求解这类问题的一次初步尝试。     

激波与堆积粉尘相互作用的数值模拟

基于双流体模型和测定的堆积粉尘的本构方程 ,利用AUSM+ 格式 ,对激波与堆积粉尘的相互作用进行了数值模拟。计算所反映的流场结构与实验图像一致。此外还对激波强度 ,颗粒材料密度等对流场的影响进行了讨论。     

满足几何守恒律的WENO格式及其应用

对几何守恒律的来源进行了分析,发展了一种满足几何守恒律的WENO格式,并应用于翼型层流分离现象的数值模拟中。为消除网格质量影响,采用守恒型方法计算网格导数,并将标准的WENO格式分解为中心差分部分和数值耗散部分。算例计算结果表明,几何守恒律对高精度有限差分WENO格式计算结果具有重要影响,本文方法能够消除网格导数计算误差,保证来流保持性。将本文方法应用于SD7003翼型层流分离现象的数值模拟中,计算结果与文献中计算及试验数据吻合较好,同时能够精细捕捉小尺度流场结构,准确模拟翼型层流分离现象中的复杂流动过程。     

二维激波与剪切层相互作用的直接数值模拟研究

采用五阶weighed esseritially non-oscillatory (WENO) 格式和三阶total variation diminishing (TVD) Runge-Kutta 格式, 通过求解二维非定常Navier-Stokes 方程, 直接数值模拟了激波与剪切层相互作用, 目的在于揭示激波与剪切层相互作用过程中噪声产生的机理. 研究发现:(1) 当入射激波穿过剪切层时, 剪切层中心位置向下层区域偏移;(2) 入射激波穿过剪切层产生小激波, 在小激波与剪切层接触点处产生声波并向外辐射;(3) 反射激波穿过剪切层后形成了分段弧状激波;(4) 当反射激波穿过剪切层时, 激波在鞍点处泄漏并向外辐射声波, 这是一种激波泄漏机制.     

局部弹性翼型非定常分离的动力学特性

对在低雷诺数下局部弹性翼型绕流中, 局部弹性导致的自激振动所产生的复杂非定常流动分离现象和描述方法进行了分析. 采用ALE-CBS方法数值模拟了具有可动边界的绕流流场问题, 同时采用Galerkin方法求解局部弹性结构的控制方程. 着重研究了翼型的局部弹性对流动分离和翼型性能的影响, 并分别从Eulerian和Lagrangian的角度分析了局部弹性结构导致的不同非定常分离现象, 其中Lagrangian角度可以方便地揭示出局部弹性翼型大幅度提高升力的机理和流动中的能量迁移. 结果表明翼型的局部弹性对非定常分离和分离泡的演化过程有着明显的影响, 可以使得流体质点由主流获取动量实现再附, 并且在一定的攻角下可以将固定分离转变为移动分离, 从而明显地提高了翼型的升力.     

低雷诺数翼型蒙皮主动振动气动特性及流场结构数值研究

针对低雷诺数(Re)翼型气动性能差的特点,文章通过对翼型柔性蒙皮施加主动振动的方法,提高翼型低Re下的气动特性,改善其流场结构.采用带预处理技术的Roe方法求解非定常可压缩Navier--Stokes方程,对NACA4415翼型低Re流动展开数值模拟.通过时均化和非定常方法对比柔性蒙皮固定和振动两种状态下的升阻力气动特性和层流分离流动结构.初步研究工作表明在低Re下柔性蒙皮采用合适的振幅和频率,时均化升阻力特性显著提高,分离泡结构由后缘层流分离泡转变为近似的经典长层流分离泡,分离点后移,分离区缩小.在此基础上,文章更加细致研究了柔性蒙皮两种状态下单周期内的层流分离结构及壁面压力系数分布非定常特性和演化规律.蒙皮固定状态下分离区前部流场结构和压力分布基本保持稳定,表现为近似定常分离,仅在后缘位置出现类似于卡门涡街的非定常流动现象.柔性蒙皮振动时从分离点附近开始便产生分离涡,并不断向下游移动、脱落,表现为非定常分离并出现大范围的压力脉动.蒙皮振动使流体更加靠近壁面运动,大尺度的层流分离现象得到有效抑制.     

PIV study of flow around unsteady airfoil with dynamic trailing-edge flap deflection

The flow around an oscillating NACA 0015 airfoil with prescheduled trailing-edge flap motion control was investigated by using particle image velocimetry (PIV). Aerodynamic load coefficients, obtained via surface pressure measurements, were also acquired to supplement the PIV results. The results demonstrate that upward flap deflections led to an improved negative peak pitching moment coefficient C _m,peak, mainly as a consequence of the increased suction pressure on the lower surface of the flap. The behavior of the leading-edge vortex (LEV) was largely unaffected. Its strength was, however, reduced slightly compared to that of the uncontrolled airfoil. No trailing-edge vortex was observed. For downward flap deflection, the strength of the LEV was found to be slightly increased. A favorable increase in C _l,max, as a consequence of downward flap-induced positive camber effects, accompanied by a detrimental increase in the nose-down C _m,peak, due to the large pressure increase on the lower surface of the flap, was also observed.     

Particle image velocimetry investigation of flow over unsteady airfoil with trailing-edge strip

The flow over a flapped NACA 0012 airfoil, oscillated slightly through the static-stall angle, was investigated by using particle image velocimetry, and was supplemented by surface pressure and dynamic-load measurements. A significant increase in the dynamic lift force and nose-down pitching moment was observed. The most pronounced flow phenomenon was the formation and detachment of an energetic leading-edge vortex compared to the no-flapped airfoil. The details of the underlying physical mechanisms responsible for the various light-stall flow processes were provided via the instantaneous velocity and vorticity fields measurements. In contrast to the Gurney flap, the inverted trailing-edge strip led to an improved negative damping while a reduced lift force. The addition of an inverted strip always led to the appearance of a Karman-type vortex shedding street immediately downstream of the strip over the entire oscillation cycle.     

Unsteady airfoil with a harmonically deflected trailing-edge flap

The effects of a harmonically deflected trailing-edge flap, actuated at different start times and amplitudes but with frequency different from the airfoil motion, on the aerodynamic loads of an oscillating NACA 0015 airfoil were investigated experimentally at Re=2.51×10⁵. Both in-phase and 180° out-of-phase flap deflections, relative to the airfoil motion, were tested. The results show that there was a large change in the hysteretic behavior of the dynamic load loops, and that the formation and detachment of the leading-edge vortex (LEV) were not affected by the flap motion, while the low pressure signature of the vortex was affected by the flap actuation start time. The later the flap actuation the larger the change in the strength of the LEV. The present flap control scheme was also found to be as effective as that achieved by a pulsed ramp flap motion, but with a reduced number of control parameters.     

定常吹气对倾转旋翼机向下载荷的影响

为进一步提高倾转旋翼机悬停状态下的有效载重,开展了定常吹气流动控制对向下载荷的影响研究。首先应用延迟脱体涡模拟(DDES)方法对翼型-90°迎角下非定常大范围分离流动结构进行了数值分析;然后分别开展了前缘吹气、后缘吹气降载措施研究,揭示了吹气降载的机理,并对不同吹气口位置和吹气动量系数的影响进行了定量分析,最后开展了前、后缘同时吹气作用下降载数值模拟研究。计算结果表明:前缘最佳吹气位置在翼型的前缘点,而后缘吹气最佳位置位于襟翼弦长的15%处;前缘吹气的降载效果要优于后缘吹气,而且吹气动量系数对向下载荷的影响较小;相对于初始未施加流动控制构型,阻力系数减小量可达到32.72%。     

横摆振荡翼型动态气动掠效应试验研究

大型风力机设计对获取翼型更加全面、准确的动态载荷提出更高要求, 研究翼型横摆振荡动态气动特性具有重要意义. 借助"电子凸轮"技术和动态数据同步采集手段, 针对翼型动态“掠效应”首次开展了横摆振荡风洞试验研究, 研究表明: 横摆振荡翼型的气动曲线存在明显迟滞效应, 吸力面压力周期性波动是主要诱因, 且随着振荡频率、初始迎角和振幅的增大, 气动迟滞特性均增强; 升力和压差阻力随横摆角变化的迟滞回线呈"W"形, 俯仰力矩迟滞回线呈"M"形, 升力差量迟滞回线呈"$\infty$"形; 负行程下翼型气动力相对于正行程下的更高, 且负行程下翼型气动力随振荡频率的增大而略有增大, 正行程下则明显减小; 升力系数功率谱密度分布在振荡频率倍频处的能量集中的幅值随着振荡频率增大有增大趋势; 吸力面1.2%和40%弦长处压力的滞回特性较强, 是由于翼面剪切层涡和动态分离涡周期性发展、运动、破裂和重建; 振幅为$10^{\circ}$时, 升力迟滞曲线呈"$^{\wedge}$"形, 振幅为$30^{\circ}$ 时, 升力迟滞曲线呈"$^{\wedge\wedge\wedge}$"形.      

The Multi-point Optimization of Shock Control Bump with Constant-Lift Constraint Enhanced with Suction and Blowing for a Supercritical Airfoil

Both shock control bump (SCB) and suction and blowing are flow control methods used to control the shock wave/boundary layer interaction (SWBLI) in order to reduce the resulting wave drag in transonic flows. A SCB uses a small local surface deformation to reduce the shock-wave strength, while suction decreases the boundary-layer thickness and blowing delays the flow separation. Here a multi-point optimization method under a constant-lift-coefficient constraint is used to find the optimum design of SCB and suction and blowing. These flow control methods are used separately or together on a RAE-2822 supercritical airfoil for a wide range of off-design transonic Mach numbers. The RANS flow equations are solved using Roe’s averages scheme and a gradient-based adjoint algorithm is used to find the optimum location and shape of all devices. It is shown that the simultaneous application of blowing and SCB (hybrid blowing/SCB) improves the average aerodynamic efficiency at off-design conditions by 18.2 % in comparison with the clean airfoil, while this increase is only 16.9 % for the hybrid suction/SCB. We have also studied the SWBLI and how the optimization algorithm makes the flow wave structure and interactions of the shock wave with the boundary layer favorable.     

Time-resolved stereo PIV measurements of shock–boundary layer interaction on a supercritical airfoil

Time-resolved stereo particle-image velocimetry (TR-SPIV) and unsteady pressure measurements are used to analyze the unsteady flow over a supercritical DRA-2303 airfoil in transonic flow. The dynamic shock wave–boundary layer interaction is one of the most essential features of this unsteady flow causing a distinct oscillation of the flow field. Results from wind-tunnel experiments with a variation of the freestream Mach number at Reynolds numbers ranging from 2.55 to 2.79 × 10⁶ are analyzed regarding the origin and nature of the unsteady shock–boundary layer interaction. Therefore, the TR-SPIV results are analyzed for three buffet flows. One flow exhibits a sinusoidal streamwise oscillation of the shock wave only due to an acoustic feedback loop formed by the shock wave and the trailing-edge noise. The other two buffet flows have been intentionally influenced by an artificial acoustic source installed downstream of the test section to investigate the behavior of the interaction to upstream-propagating disturbances generated by a defined source of noise. The results show that such upstream-propagating disturbances could be identified to be responsible for the upstream displacement of the shock wave and that the feedback loop is formed by a pulsating separation of the boundary layer dependent on the shock position and the sound pressure level at the shock position. Thereby, the pulsation of the separation could be determined to be a reaction to the shock motion and not vice versa.     

Performance Improvement of a Supercritical Airfoil by a Multi-point Optimized Shock Control Channel

A shock control channel (SCC) is a flow control method introduced here to control the shock wave/boundarylayer interaction (SWBLI) in order to reduce the resulting wave drag in transonic flows. An SCC transfers an appropriate amount of mass and momentum from downstream of the shock wave location to its upstream to decrease the pressure gradient across the shock wave and as a result the shock-wave strength is reduced. Here, a multi-point optimization method under a constant-lift-coefficient constraint is used to find the optimum design of the SCC. This flow control method is implemented on a RAE-2822 supercritical airfoil for a wide range of off-design transonic Mach numbers. The RANS flow equations are solved using Roe’s averages scheme and a gradient-based adjoint algorithm is used to find the optimum location and shape of the SCC. The solver is validated against experimental works studying effect of cavities in transonic airfoils. It is shown that the application of an SCC improves the average aerodynamic efficiency in a range of off-design conditions by 13.2% in comparison with the original airfoil. The SCC is shown to be an effective tool also for higher angle of attack at transonic flows. We have also studied the SWBLI and how the optimization algorithm makes the flow wave structure and interactions of the shock wave with the boundary layer favorable.     

Hydrodynamics of flow over a transversely oscillating circular cylinder beneath a free surface

In this paper, hydrodynamic force coefficients and wake vortex structures of uniform flow over a transversely oscillating circular cylinder beneath a free surface were numerically investigated by an adaptive Cartesian cut-cell/level-set method. At a fixed Reynolds number, 100, a series of simulations covering three Froude numbers, two submergence depths, and three oscillation amplitudes were performed over a wide range of oscillation frequency. Results show that, for a deeply submerged cylinder with sufficiently large oscillation amplitudes, both the lift amplitude jump and the lift phase sharp drop exist, not accompanied by significant changes of vortex shedding timing. The near-cylinder vortex structure changes when the lift amplitude jump occurs. For a cylinder oscillating beneath a free surface, larger oscillation amplitude or submergence depth causes higher time-averaged drag for frequency ratio (=oscillation frequency/natural vortex shedding frequency) greater than 1.25. All near-free-surface cases exhibit negative time-averaged lift the magnitude of which increases with decreasing submergence depth. In contrast to a deeply submerged cylinder, occurrences of beating in the temporal variation of lift are fewer for a cylinder oscillating beneath a free surface, especially for small submergence depth. For the highest Froude number investigated, the lift frequency is locked to the cylinder oscillation frequency for frequency ratios higher than one. The vortex shedding mode tends to be double-row for deep and single-row for shallow submergence. Proximity to the free surface would change or destroy the near-cylinder vortex structure characteristic of deep-submergence cases. The lift amplitude jump is smoother for smaller submergence depth. Similar to deep-submergence cases, the vortex shedding frequency is not necessarily the same as the primary-mode frequency of the lift coefficient. The frequency of the induced free surface wave is exactly the cylinder oscillation frequency. The trends of wave length variation with the Froude number and frequency ratio agree with those predicted by the linear theory of small-amplitude free surface waves.