Heterogeneity of Plastic Flow of Zirconium Alloys with a Parabolic Law of Strain Hardening

The specific features of plastic–strain macrolocalization at the stage of the parabolic law of strain hardening in samples from industrial zirconium–based alloys are considered. It is shown that in predeformed blanks, zones with a different character of plastic–strain localization are formed. It is also shown that the strain–localization macropattern can be used as a characteristic of the susceptibility of a material to further plastic form–changing, for example, upon tube rolling. The sign of fracture of alloys upon plastic deformation is revealed. The scale effect in the formation of localizedplastic–flow zones is shown and studied.     

Problem of Increasing the Survivability of Two–Stage Ballistic Guns

The paper proposes methods for increasing the survivability of light–gas guns, including new designs and nonconventional modes of shot. It is established theoretically and experimentally that a decrease in the cone angle of the conical adapter to 2.5 — 3° leads to a severalfold increase in the survivability of the high–pressure chamber. A compound piston with a liquid or gel–like filler is designed. The mode of shot from a light–gas gun with superlight pistons and without a diaphragm is justified and tested experimentally. Conical and measuring adapters with liners made of thermally– and wear–resistant alloys are designed to prevent ablation of the light–gas gun barrel.     

Modification of a mouldboard plough surface using arrays of polyethylene protuberances

Surface design modifications have recently exhibited a means of reducing soil-tool adhesion. The tribological characteristics of soil-burrowing animals were employed on tillage machinery to study the effect on adhesion. Considering the characteristics of dung beetles, ultra high molecular weight polyethylene (UHMW-PE) protuberances were mounted as embossed arrays on a mouldboard plough. To investigate a suitable geometry of such protuberances, five shapes were studied (flat, semi-spherical, semi-oblate, semi short-prolate and semi long-prolate) using a combination of base diameters and protrusion heights. The dimensionless height to diameter ratio (HDR) was used to characterize the geometry. Experiments were conducted to evaluate the resultant influence of various geometrical shapes and sizes of the protuberances (base diameter: 20–50 mm; protrusion height: 0–50 mm) on lowering the ploughing resistance of the mouldboard plough in Bangkok clay soil. A comparison was made between the modified and the conventional plough in dry (21.8% (d.b.)), sticky (37.2% (d.b.)), wet (49.1% (d.b.)) and flooded (64.3% (d.b.)) Bangkok clay soil at 1, 3 and 5 km/h forward speeds. Percent reduction in ploughing resistance of bionic mouldboard plough in these soil conditions with HDR = 0 was 1–6% in dry soil, 16–22% in sticky soil, 14–20% in wet soil and 8–12% in flooded soil. With HDR = 0.25 the ploughing resistance was reduced by 2–7% in dry soil, 18–36% in sticky soil, 17–33% in wet soil and 15–28% in flooded soil. Similarly with HDR = 0.5, it reduced by 10–16% in sticky soil, 6–17% in wet soil and 12–26% in flooded soil. Whereas, HDR > 0.5 increased the ploughing resistance by 7–29%.     

The nonlinear evolution of two-dimensional and three-dimensional waves in mixing layers

The authors consider problems connected with stability [1–3] and the nonlinear development of perturbations in a plane mixing layer [4–7]. Attention is principally given to the problem of the nonlinear interaction of two-dimensional and three-dimensional perturbations [6, 7], and also to developing the corresponding method of numerical analysis based on the application to problems in the theory of hydrodynamic stability of the Bubnov—Galerkin method [8–14].Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhldkosti i Gaza, No. 1, pp. 10–18, January–February, 1985.     

Container for Localization of an Explosion of a Compact High–Explosive Charge with an Inert Shell

Results of an experimental study of fragmentation effects in the explosion and the piercing power of the fragments of inert masses in the form of hemispherical aluminum and soft–steel shells enclosing the spherical charge of a high explosive under their action on flat steel, aluminum, steel–net, and claydite—concrete barriers are given. A design of the lightest spherical explosion–proof container with a load–carrying steel or glass–reinforced plastic shell protected by a splinter–proof layer capable of withstanding an explosion of a high–explosive charge (with a twofold safety factor) with an inert steel shell is proposed.     

Performance prediction of animal drawn vehicle tyres in sand

Four animal drawn vehicle (ADV) tyres of 5.00–19, 6.00–19, 7.00–19 and 8.00–19 sizes were tested in sand under various but controlled conditions in an indoor soil bin. A tyre test carriage with four-bar parallel linkage was developed for accommodating a single wheel of different sizes. Performance tests were conducted at five levels of inflation pressure and load. The sand compaction level was varied in the range of 3.4–4.5 MPa/m and forward speed of the test carriage was maintained at 3.1 km/h. Performance of the tyres 7.00–19 and 8.00–19 was identical and offered less rolling resistance as compared to other tyres. However, their use in camel carts may not be recommended beyond the payload of 6 kN on single wheel with inflation pressure and sand compaction range of 172–379 kPa and 3.4 –4.5 MPa/m, respectively. Based on the experimental results, empirical models were developed to predict the performance of tyres. The accuracy of prediction of the developed empirical models was compared with that of existing semi-empirical approaches. Model with sand mobility number considered relatively simple and convenient to use in the field and yields reasonably good prediction for rolling resistance and sinkage.     

Simulation of ratcheting strain to a high number of cycles under biaxial loading

The Ohno–Wang kinematic hardening rule is modified to incorporate the Burlet–Cailletaud radial evanescence term for an improved simulation of the ratcheting behavior. The Delobelle parameter δ^′ is implemented in the modified model to compromise shakedown of the Burlet–Cailletaud hardening rule and over-prediction of the Ohno–Wang model. An evolution equation is proposed for δ^′ to simulate the ratcheting strain over an extended domain of cycles. Ratcheting tests were conducted on S45C steel under four types of nonproportional axial–torsional loading. The new model is found to yield reasonably accurate predictions of ratcheting strain to a much higher number of cycles compared with other studies.     

Micromechanical study of formation and evolution of martensite for Cu–Al–Ni single crystal by moiré interferometry

The basic properties of pseudoelasticity of Cu–Al–Ni single crystal are studied to analyze the morphology associated with the formation and evolution of martensite and the shape memory recovery process at different temperatures. Use is made of a multifunctional macro–micro moiré interferometry measurement system. The β₁ to β₁^′ phase changes are identified with the stress-induced transformation of a Cu–13.7%Al–4.18%Ni (wt%) alloy. The invariant plane between the martensite and the parent phase is shown directly by fringe patterns. It is found that martensite appears in the shape of bands or thin plates on the surface of the specimen. The formation of martensite is a very rapid process and martensite ‘jumps' out until the specimen is completely transformed into a single variant. The results reveal the mechanism and process of stress-type and temperature-induced martensitic transformation.     

Electrical Conductivity of Rocks under Shock Compression

The electrical conductivity of silicate rocks (quartzite, granite, and dry and wet tuffs) under single shock–wave loading is measured. It is shown that even at a shock–wave pressure of 20 GPa, the conductivity of rocks changes by several orders of magnitude compared to the initial value (10^–9 — 10^{–12 –1} · m^–1 for dry rocks) and reaches 0.01 ^–1 · m^–1 for quartzite and granite and 0.1 — 1.0 ^–1 · m^–1 for tuff. As the shock–wave amplitude increases from 20 to 60 GPa, the electrical conductivity increases by further one or two orders of magnitude. The experiments with rocks did not reveal a drastic change in electrical conductivity similar to the that observed for silicon dioxide (fused quartz) at a pressure of about 40 GPa.     

Effective elastic moduli of two dimensional solids with distributed cohesive microcracks

Effective elastic properties of a defected solid with distributed cohesive micro-cracks are estimated based on homogenization of the Dugdale–Bilby–Cottrell–Swinden (Dugdale–BCS) type micro-cracks in a two dimensional elastic representative volume element (RVE).Since the cohesive micro-crack model mimics various realistic bond forces at micro-scale, a statistical average of cohesive defects can effectively represent the overall properties of the material due to bond breaking or crack surface separation in small scale. The newly proposed model is distinctive in the fact that the resulting effective moduli are found to be pressure sensitive.     

Analysis of the Applicability of Macroscopic Models of the Shock Wave Structure in a Binary Mixture of Inert Gases

The results of calculating the shock wave structure in Ne–Ar, He–Ar, He–Ne, and He–Xe mixtures by means of the relaxation method on the basis of the system of Navier-Stokes equations and complete and modified systems of Burnett equations are compared with the results of direct statistical simulation (Monte-Carlo method). The domain of applicability of these systems of equations for calculating gas dynamic variable profiles is analyzed as a function of both the molecular mass ratio and the initialconcentrations.     

Perturbations of finite amplitude in a boundary layer

The nonlinear development of Tollmien-Schlichting waves in a boundary layer is studied taking account of the nonparallel character of the mean flow. The investigation is made using a modified Stuart-Watson method [1–3]. A comparison is made with results obtained with the usual quasiparallel approach.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 1, pp. 150–153, January–February, 1976.     

Motion of a cylindrical cavity near a free boundary of a liquid

The dynamics of a cylindrical cavity in a liquid with no allowance for vertical displacement are considered in [1–3]. The present study investigates the pulsation motion of a cylindrical cavity near a free boundary of a liquid, allowing for displacement of the axis of the cavity in the vertical direction.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 6, pp. 173–176, November–December, 1988.     

Development of vortical motions of an incompressible fluid in the cavity of a rotating body

Vortical nonstationary viscous incompressible flows in the space between coaxial cylinders or hemispherical segments rotating with a constant angular acceleration about a stationary axis of symmetry are analyzed numerically for Reynolds numbers Re — 1–10. It is shown that laminar circulating motions are realized. Two vortices form in the flow. The positions of these vortices depend substantially on the geometry of the rotating cavity.Moscow. Translated from Izvestiya Rossiiskoi Akademii Nauk, Mekhanika Zhidkosti i Gaza, No. 2, pp. 47–52, March–April, 1995.     

The degeneration of nucleate boiling conditions under conditions of free convection

An experimental investigation was made of the effect of the degeneration of nucleate boiling conditions under conditions of natural convection for alkali metals (potassium, cesium) in working sections with diameters of 14 and 11 mm in a pressure range of 0.04–1.7 bar, and for nonmetallic liquids (ethanol, benzene, and carbon tetrachloride) in working sections with diameters from 0.1 to 10 mm in a pressure range of 0.05–2.5 bar. The regions were determined for thermal flows, with which the appearance of a vapor phase after single-phase natural convection leads to the formation of a stable vapor film. The results of high-speed movingpicture photography of this phenomenon are also given.Translated from Zhurnal Prikladnoi Mekhaniki i Tekhnicheskoi Fiziki, No. 1, pp. 69–73, January–February, 1972.     

The reflection of a plane shock wave from a body with groove

When a plane shock wave impinges on bodies with grooves and when a supersonic stream of gas flows past such bodies a complicated flow pattern develops. In a number of cases oscillations of the bow wave [1–3] and an anomalous heating of the gas in the groove [4–6] have been observed. Unsteady reflection of shock waves from bodies with grooves and the processes occurring inside the grooves have been investigated comparatively little.Translated from Izvestiya Akademii Nauk SSSR, Hekhanika Zhidkosti 1 Gaza, No. 5, pp. 180–186, September–October, 1935.The authors wish to thank V. I. Ivanov for carrying out the calculations.     

Influence of an elastic plate on the motion of an inhomogenfous fluid

The influence of a thin elastic isotropic plate on the wave motion of an inhomogeneous fluid originating under the effect of external periodic perturbations is investigated. The fluid density increases constantly with depth. Analogous problems have been examined for an inhomogeneous fluid without a plate in [1, 2] and with a plate on the surface of a homogeneous fluid in [3–5].Sevastopol'. Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 1, pp. 60–67, January–February, 1972.     

Tension–compression asymmetry of phosphor bronze for electronic parts and its effect on bending behavior

In-plane tension and compression experiments on copper alloy sheets (phosphor bronze) and 6000 series aluminum alloy sheets (AA6016-T4) were conducted using a specially designed testing apparatus. The apparatus is equipped with comb-type dies so that stress–strain curves of a sheet specimen subjected to tension followed by compression, and vice versa, can be measured without buckling of the specimen, as well as those for monotonic tension and compression. A difference was observed in the flow stresses between tension and compression for the as-received copper alloy, but not for the aluminum alloy. Moreover, stress reversal tests, such as tension followed by compression and compression followed by tension, were carried out in order to measure the Bauschinger effect. In the second part of the experiment, bending moment–curvature diagrams were measured for the as-received and pre-stretched specimens. The bending moment–curvature diagrams were compared with those calculated using the stress–strain curves obtained from the tension–compression tests, and were in good agreement with those calculated with the tension–compression asymmetry and the Bauschinger effect correctly reproduced.     

Law of friction in the region of a gas screen behind a permeable section

The results are given of measurements of friction behind a permeable section in a subsonic turbulent boundary layer at blowing intensity j = 0.003–0.04. Methods are proposed for calculating the local coefficients of friction in the region of a gas screen and the Reynolds number determined from the momentum loss thickness; these are in satisfactory agreement with experiment.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 2, pp. 159–162, March–April, 1979.     

Development of temperature-compensated resistance strain gages for use to 800°C

This paper describes the development and evaluation of temperature-compensated resistance strain gages for use to 800°C. These gages included single-element gages and double-element half-bridge gages. The filament of single-element gages was fabricated from specially developed Fe–Cr–Al–V–Ti–Y alloy wire. When bonded to high-temperature Ni-based alloy GH39 after stabilization at 800°C for one hour, the apparent strain from room temperature to 800°C was less than 2000 m/m. Double-element gages were fabricated from Pt–W–Re–Ni–Cr–Y alloy wire (active grid) and Pt–Ir alloy wire (compensating grid). When bonded to different high-temperature alloy specimens and stabilized, and when ballast resistance in series with the compensating grid adjusted suitably, the gages' apparent strains from room temperature to 800°C were less than 2400 m/m.Effects of preoxidization of Fe–Cr–Al wire on the characteristics of the single-element gages are described.