两自由度振动系统的斜碰撞分析

研究斜碰撞振动系统动力学的一个关键问题是对系统在碰撞前后的状态进行合理描述和正确计算．针对两弹性体斜碰撞问题，基于瞬间碰撞假设，提出了采用步进冲量来分析和求解斜碰撞前后的状态关系；并以弹簧摆和振子组成的两自由度斜碰撞振动系统为例，具体介绍了该算法如何实现．用解析方法讨论了该系统在斜碰撞过程中可能出现的各种力学现象，将冲量步进算法得到的数值解与解析结果进行对比，取得了完全一致的结果．该数值方法能适应多种斜碰撞问题的计算．     

碰撞振动及其典型现象

综述了机械系统碰撞振动的近期研究成果和碰撞振动的某些典型现象．对碰撞振动的几何与数值分析,以及实验研究作了评述,内容侧重于稳定性、奇异性,擦边诱发分叉,非线性模态等问题．最后,指出了今后研究中面临的一些问题      

两柔性梁碰撞振动类型的实验研究

基于对两弹性部件碰撞振动的理论及数值研究,设计了两柔性梁碰撞实验来研究碰撞振动类型．在实验中观察到亚谐、超谐、概周期、混沌等多种碰撞振动类型．此外,发现系统存在类似“频率锁定”性质的碰撞振动,以及同时存在性质相异的碰撞行为,如谐碰撞与混沌振动共存现象     

浮筏系统中的碰撞动力学离散模型(1):确定性模型

本文研究浮筏中刚性连结的零部件冲击受损后在有限空间的碰撞振动,应用碰撞动力学理论建立其确定性离散动力学模型,导出确定性系统的碰撞庞加莱映射.实例分析指出,零部件的质量和冲击后外激励的频率不影响零部件与设备之间的碰撞,碰撞主要发生在零部件与筏体之间,而且随着零部件质量的增加碰撞次数发生有限次的增加.冲击后外激励的频率对零部件与筏体之间的碰撞次数有一定的影响.从碰撞庞加莱图可以看出碰撞系统的振动表现为亚谐振动.     

柔性悬臂梁与钢球碰撞机制模拟与响应分析

采用线性-弹簧阻尼模型模拟钢球与梁之间的碰撞机制,研究了钢球碰撞下柔性悬臂欧拉梁的衰减振动问题;通过分析推导并建立了整个系统的分段非线性动力学方程。数值结果表明:碰撞是一个瞬时的能量传递过程,碰撞前后梁与钢球的速度均会发生突变;柔性梁从碰撞中获得初始能量,在自身阻尼的作用下作衰减振动;改变系统的参数如钢球质量与速度、碰撞位置等均会对梁的衰减振动产生显著的影响。     

碰撞振动系统分岔与混沌的研究进展

针对工程实际中普遍存在的碰撞振动系统这种典型的非光滑动力系统, 其研究具有重要的理论意义和工程实用价值. 碰撞振动系统动力学的分析与研究方法主要有理论分析、数值模拟以及应用与实验研究. 为了研究碰撞振动系统的周期运动稳定性、分岔及混沌, 采用的手段有建立Poincar\'{e}映射、中心流形和范式方法, 映射的分岔与混沌理论是碰撞振动系统研究的理论基础. 首先简述了碰撞振动系统的分析与研究方法, 光滑非线性系统动力学的分析方法部分可以推广到碰撞振动系统, 碰撞振动的不连续性导致一些方法的适用性和有效性问题. 进一步综述了碰撞振动系统周期运动稳定性、分岔、混沌及奇异性的理论研究和工程应用现状. 最后着重结合相关离散型映射系统的动力学发展, 对碰撞振动系统的分岔与混沌研究及存在的主要问题进行了讨论, 并展望了其发展趋势.      

具有单侧刚性约束的两自由度振动系统在强共振条件下的拟周期运动与混沌

采用理论分析和数值仿真相结合的方法,研究了一类两自由度碰撞振动系统在一种强共振条件下的Hopf分叉问题.分析并证实了碰撞振动系统在此共振条件下可由稳定的周期1-1振动分叉为不稳定的周期3-3振动,讨论了亚谐振动向混沌运动的演化过程.     

具有单侧刚性约束的两自由度振动系统在强共振条件下的拟周 …

采用理论分析和数值仿真相结合的方法,研究了一类两自由度碰撞振动系统在一种强共振条件下的Ｈｏｐｆ分叉问题,分析并证实了碰撞振动系统在此共振条件下可由稳定的周期１－１振动分叉为不稳定的周期３－３振动,讨论了亚谐振动向混沌运动的演化过程。     

VIBRO-IMPACT DYNAMICS OF PIPE CONVEYING FLUID SUBJECTED TO RIGID CLEARANCE CONSTRAINT 1)

管道与间隙约束间的碰撞振动是工程输流管结构的一个重要动力学现象. 迄今,人们通常采用光滑的非线性弹簧来模拟管道与间隙约束之间的碰撞力,但这种光滑的碰撞力无法真实反映碰撞前后管道状态向量的非光滑传递特征. 本文基于非光滑理论建立了具有刚性间隙约束简支输流管的非线性碰撞振动模型,利用 Galerkin 法离散了无穷维的管道模型, 并引入恢复系数构造了碰撞前后管道各处状态向量的传递矩阵,运用四阶龙格库塔法分析了脉动内流激励下管道与刚性间隙约束的非光滑碰撞振动现象,着重讨论了刚性间隙约束参数对管道动态响应随流速脉动频率变化的影响规律,特别是碰撞振动的周期性运动规律. 研究结果表明,刚性约束间隙值对管道碰撞振动行为的影响较大,在某些脉动频率下管道会出现多周期和非周期性的运动形态,还可出现非光滑系统特有的黏滑现象. 此外,碰撞恢复系数对管道振动的影响也比较显著,较小的恢复系数值更容易使管道在大范围脉动频率区间出现复杂的非周期碰撞振动.     

具有刚性间隙约束输流管的碰撞振动

管道与间隙约束间的碰撞振动是工程输流管结构的一个重要动力学现象. 迄今,人们通常采用光滑的非线性弹簧来模拟管道与间隙约束之间的碰撞力,但这种光滑的碰撞力无法真实反映碰撞前后管道状态向量的非光滑传递特征. 本文基于非光滑理论建立了具有刚性间隙约束简支输流管的非线性碰撞振动模型,利用 Galerkin 法离散了无穷维的管道模型, 并引入恢复系数构造了碰撞前后管道各处状态向量的传递矩阵,运用四阶龙格库塔法分析了脉动内流激励下管道与刚性间隙约束的非光滑碰撞振动现象,着重讨论了刚性间隙约束参数对管道动态响应随流速脉动频率变化的影响规律,特别是碰撞振动的周期性运动规律. 研究结果表明,刚性约束间隙值对管道碰撞振动行为的影响较大,在某些脉动频率下管道会出现多周期和非周期性的运动形态,还可出现非光滑系统特有的黏滑现象. 此外,碰撞恢复系数对管道振动的影响也比较显著,较小的恢复系数值更容易使管道在大范围脉动频率区间出现复杂的非周期碰撞振动.      

Determination of impact parameters by optical measurement of the impactor displacement

In dynamic materials research, high precision impact displacement, velocity and force measurements are often required. In lower velocity testing apparatus, impact force histories are most often obtained through strain gage, piezoelectric force transducer or accelerometer signals. Velocity and displacement histories are then obtained by integration. Non-contact measurement systems have a number of advantages over these more common mechanical contact methods, and can generally be used at higher impact speeds. In this paper a relatively simple optical technique is presented for recording the impactor displacement history, from which the impact velocity and force histories can be readily obtained for a (quasi-) rigid impactor. The technique is based on the relative displacement of two moiré line gratings: one grating attached to the impacting body and the other serving as stationary reference grating. The technique has proven to be useful for impact speeds of a few m/s to well over 200 m/s. Results of transverse impact experiments on composite laminates are presented.     

Generation of a magnetic field in the shear deformation region of a conducting material upon high–velocity penetration

It is shown that when a high–velocity impactor penetrates into a conducting target with a transverse magnetic field, conditions for considerable field amplification are produced in the shear deformation region on the lateral surface of the impactor. Field generation in a conducting medium deformed in shear is considered within the framework of a plane one–dimensional problem of magnetohydrodynamics. The results obtained indicate that along the boundary of the cavity produced by the impactor in the target with a magnetic field, a thin layer with a very high field intensity (about 100 T) is formed. The possibility of explosion of this layer due to the magnetic pressure acting in it is analyzed.     

基于偏转距离近似模型的动能撞击小行星防御任务脉冲轨道优化研究

小行星撞击对地球上的生命存在重大潜在威胁,动能撞击是目前最易实现且成熟度最高的防御方案.动能撞击任务的一种轨道优化指标为最大化偏转距离(即小行星被偏转前后近地距的改变量),若用数值积分的方法精确计算偏转距离, 会导致优化效率较低.在动能撞击任务的设计初期, 可以对动力学模型及偏转距离的计算方法进行简化,以提升优化效率. 本文首先将高精度模型简化为二体模型,分析了两种经典偏转距离解析模型的适用条件,同时提出一种基于近地点时刻预估的偏转距离近似模型; 考虑运载约束,将化学推进变轨简化为脉冲推力变轨,建立了直接转移(两脉冲及三脉冲)和行星借力飞行转移(单次及两次借力)的动能撞击轨道优化模型,利用遗传算法求解了优化问题. 以偏转小行星Apophis为例, 相比于解析模型,验证了本文提出的近似模型可以同时提升最优性、降低求解复杂性. 优化结果表明,三脉冲直接转移方案与两脉冲直接转移方案的最优偏转效果基本一致,借力飞行转移方案相比于直接转移方案对偏转距离的提升效果并不明显.在动能撞击任务的前期设计中, 可以基于二体模型进行防御效果的快速评估,虽然对计算偏转距离存在一定误差, 但对防御窗口的优化结果影响不大. 进一步,数值求解偏转距离时, 可通过引入主要引力摄动项(金星、地球、木星)修正二体模型,使其与高精度模型之间的求解误差在1%以下.      

On the penetration of a rotating impactor into an elastic-plastic medium

This research is devoted to the modeling of high-speed rectilinear penetration of a rigid axisymmetric body (impactor with a flat bluntness) into an elastic–plastic media with account for its rotation about the axis of symmetry. The body has an arbitrary shape of the meridian. The resistance to the motion is represented as the sum of the body drag and the contribution of friction. The dynamic system governing the body motion is derived and the qualitative and numerical analysis of the projectile movement and perforation of a slab are performed. The problem of shape optimization of impactor with a flat bluntness is studied using evolutionary algorithm.     

含黏弹性夹芯FG-GRC后屈曲梁的低速冲击响应

研究了含黏弹性夹芯的功能梯度石墨烯增强复合材料(functionally graded graphene reinforced composite, FG-GRC)后屈曲梁在低速跌落冲击下的跳跃振荡行为.采用修正Halpin-Tsai细观模型预测FG-GRC的材料宏观属性.使用赫兹点接触模型确定冲击器和梁之间的接触力.提出了考虑轴向预应力的复合材料层本构关系和阻尼层的Kelvin型黏弹性本构.通过一种广义高阶剪切变形锯齿梁模型建立夹芯梁的非线性位移场. 基于Hamilton 能量变分原理, 推导了动力学控制方程组. 通过两步分析,首先获得弹性后屈曲平衡路径作为冲击问题的初始状态. 随后, 结合四阶龙格库塔法,拓展了两步摄动-伽辽金法计算接触力的时程曲线以及后屈曲梁的位移时程曲线.研究了后屈曲梁在单次和两次撞击下双稳态大幅振荡过程的动力学特征.讨论了轴向载荷、冲击速度、黏弹性阻尼特性、冲击器材料等因素对于碰撞接触力以及后屈曲梁动力响应的影响规律.结果表明, 接触力仅对冲击速度较为敏感,一定的结构碰撞参数设计可以在接触力变化不大的情况下,使得后屈曲梁由单势能阱运动转变为双阱大幅振荡.      

Non-linear behavior in a discretely forced oscillator

The simulated and experimental responses of a rigid-arm pendulum driven by an external impactor are considered. Here, impact occurs if the trajectory of a rotating impactor intersects that of the pendulum. Using the rotation rate of the impactor as the control parameter, experimental trials have demonstrated much of the dynamic behavior predicted by numerical simulations. The system exhibits chatter (i.e., multiple impacts within a single forcing period), sticking (i.e., contact between the pendulum and the impactor for non-negligible amounts of time), high-order periodicity, and behavior suggestive of chaos. A new convention for classifying periodic motions as well as insights regarding the nature of the coefficient of restitution (COR) in an experimental impacting system are also presented.     

Effect of the impulse of a meteorite on the dimensions of the impact crater

Formulas for the diameter and depth of an explosion crater are obtained which take into account the energy and impulse of the explosion products, rock strength, burial depth of the explosive charge, and gravity. Using the explosive-shock analogy, the obtained relations are extended to the case of meteorite (impactor) impact on the planet’s crust (target). It is shown that in the gravity cratering regime, the influence of the impulse of the impactor is significant and increases with increasing its size. In the strength cratering regime, the impulse has little effect on crater dimensions. It is established that crater dimensions are determined mainly by the kinetic energy of the impactor and, to a lesser degree, by its impulse.     

Experimental‐theoretical analysis of nonstationary interaction of deformable impactors with soil

An experimental method for determining the force of resistance to penetration of a deformable impactor into soft soil was developed in the inverted formulation: the impactor and the target exchange roles and the necessary parameters of contact interaction are recorded in an immovable measuring rod (impactor). To verify the basic principles of this experimental technique, wave processes were analyzed numerically using a modified Godunov's scheme. The applicability of various models of soil deformation was studied, and the calculation results obtained were compared with experimental data.     

一种基于两级集成系统合成法的多学科稳健优化方法

针对多学科设计优化中约束存在不确定性的问题,提出了一种稳健优化方法。在该方法中采用区间模型描述不确定性设计变量,约束变化区间的最大值采用遗传算法求得,然后通过选定的满意度水平确定相应的约束值。多学科优化过程依靠两级集成系统合成法实现。通过算例验证了该方法的有效性,对处理多学科不确定性优化设计问题有一定的指导意义。     

A class of solutions of the boundary layer equations

Exact solutions of the boundary layer equations can be obtained in closed form only in rare cases. These generally involve self-similar solutions for which the corresponding ordinary differential equation can be integrated exactly. In this paper solutions of more general form, containing additive functions of the longitudinal x coordinate in the expression's for the stream function and the self-similar variable, are considered in relation to two-dimensional steady boundary layers. This makes it possible to enlarge the class of problems whose solutions are analytic expressions and in a number of cases can be obtained in the form of expressions containing arbitrary functions of x, which makes possible various interpretations of the solution. In order to introduce arbitrary functions into the solutions of the equations of the axisymmetric boundary layer the problem is reduced to an overdetermined system of ordinary differential equations. This method is also capable of being applied more widely.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 2, pp. 45–51, March–April, 1990.