Effects of slip,viscous dissipation and Joule heating on the MHD flow and heat transfer of a second grade fluid past a radially stretching sheet

The flow and heat transfer of an electrically conducting non-Newtonian second grade fluid due to a radially stretching surface with partial slip is considered. The partial slip is controlled by a dimensionless slip factor, which varies between zero （total adhesion） and infinity （full slip）. Suitable similarity transformations are used to reduce the resulting highly nonlinear partial differential equations into ordinary differential equations. The issue of paucity of boundary conditions is addressed and an effective numerical scheme is adopted to solve the obtained differential equations even without augmenting any extra boundary conditions. The important findings in this communication are the combined effects of the partial slip, magnetic interaction parameter and the second grade fluid parameter on the velocity and temperature fields. It is interesting to find that the slip increases the momentum and thermal boundary layer thickness. As the slip increases in magnitude, permitting more fluid to slip past the sheet, the skin friction coefficient decreases in magnitude and approaches zero for higher values of the slip parameter, i.e., the fluid behaves as though it were inviscid. The presence of a magnetic field has also substantial effects on velocity and temperature fields.     

Effect of induced magnetic field on natural convection in vertical concentric annuli

In the present paper,we have considered the steady fully developed laminar natural convective flow in open ended vertical concentric annuli in the presence of a radial magnetic field.The induced magnetic field produced by the motion of an electrically conducting fluid is taken into account.The transport equations concerned with the considered model are first recast in the non-dimensional form and then unified analytical solutions for the velocity,induced magnetic field and temperature field are obtained for the cases of isothermal and constant heat flux on the inner cylinder of concentric annuli.The effects of the various physical parameters appearing into the model are demonstrated through graphs and tables.It is found that the magnitude of maximum value of the fluid velocity as well as induced magnetic field is greater in the case of isothermal condition compared with the constant heat flux case when the gap between the cylinders is less or equal to 1.70 times the radius of inner cylinder,while reverse trend occurs when the gap between the cylinders is greater than 1.71 times the radius of inner cylinder.These fields are almost the same when the gap between the cylinders is equal to 1.71 times the radius of inner cylinder for both the cases.It is also found that as the Hartmann number increases,there is a flattening tendency for both the velocity and the induced magnetic field.The influence of the induced magnetic field is to increase the velocity profiles.     

Numerical study of flow and heat transfer during oscillatory blood flow in diseased arteries in presence of magnetic fields

A problem motivated by the investigation of the heat and mass transfer in the unsteady magnetohydrodynamic(MHD) flow of blood through a vessel is solved numerically when the lumen of the vessel has turned into the porous structure.The time-dependent permeability and the oscillatory suction velocity are considered.The computational results are presented graphically for the velocity,the temperature,and the concentration fields for various values of skin friction coefficients,Nusselt numbers,and Sherwood numbers.The study reveals that the flow is appreciably influenced by the presence of a magnetic field and also by the value of the Grashof number.     

Flow of variable thermal conductivity fluid due to inclined stretching cylinder with viscous dissipation and thermal radiation

The aim of the present study is to investigate the flow of the Casson fluid by an inclined stretching cylinder. A heat transfer analysis is carried out in the presence of thermal radiation and viscous dissipation effects. The temperature dependent thermal conductivity of the Casson fluid is considered. The relevant equations are first simplified under usual boundary layer assumptions, and then transformed into ordinary differential equations by suitable transformations. The transformed ordinary differential equations are computed for the series solutions of velocity and temperature. A convergence analysis is shown explicitly. Velocity and temperature fields are discussed for different physical parameters by graphs and numerical values. It is found that the velocity decreases with the increase in the angle of inclination while increases with the increase in the mixed convection parameter. The enhancement in the thermal conductivity and radiation effects corresponds to a higher fluid temperature. It is also found that heat transfer is more pronounced in a cylinder when it is compared with a flat plate. The thermal boundary layer thickness increases with the increase in the Eckert number. The radiation and variable thermal conductivity decreases the heat transfer rate at the surface.     

State-space approach to two-temperature generalized thermoelasticity without energy dissipation of medium subjected to moving heat source

In this work,a model of two-temperature generalized thermoelasticity without energy dissipation for an elastic half-space with constant elastic parameters is constructed.The Laplace transform and state-space techniques are used to obtain the general solution for any set of boundary conditions.The general solutions are applied to a specific problem of a half-space subjected to a moving heat source with a constant velocity.The inverse Laplace transforms are computed numerically,and the comparisons are shown in figures to estimate the effects of the heat source velocity and the two-temperature parameter.     

Homotopy analysis solutions for the asymmetric laminar flow in a porous channel with expanding or contracting walls

In this paper, the asymmetric laminar flow in a porous channel with expanding or contracting walls is investigated. The governing equations are reduced to ordinary ones by using suitable similar transformations. Homotopy analysis method (HAM) is employed to obtain the expres- sions for velocity fields. Graphs are sketched for values of parameters and associated dynamic characteristics, especially the expansion ratio, are analyzed in detail.     

Detailed investigation on single water molecule entering carbon nanotubes

The behavior of a water molecule entering carbon nanotubes (CNTs) is studied. The Lennard-Jones potential function together with the continuum approximation is used to obtain the van der Waals interaction between a single-walled CNT (SWCNT) and a single water molecule. Three orientations are chosen for the water molecule as the center of mass is on the axis of nanotube. Extensive studies on the variations of force, energy, and velocity distributions are performed by varying the nanotube radius and the orientations of the water molecule. The force and energy distributions are validated by those obtained from molecular dynamics (MD) simulations. The acceptance radius of the nanotube for sucking the water molecule inside is derived, in which the limit of the radius is specified so that the nanotube is favorable to absorb the water molecule. The velocities of a single water molecule entering CNTs are calculated and the maximum entrance and the interior velocity for different orientations are assigned and compared.     

Determination of stress intensity factors in half-plane containing several moving cracks

The dynamic stress intensity factors in a half-plane weakened by several finite moving cracks are investigated by employing the Fourier complex transformation. Stress analysis is performed in a half-plane containing a single dislocation and without dislocation. An exact solution in a closed form to the stress fields and displacement is ob- tained. The Galilean transformation is used to transform between coordinates connected to the cracks. The stress components are of the Cauchy singular kind at the location of dislocation and the point of application of the the influence of crack length and crack running force. Numerical examples demonstrate velocity on the stress intensity factor.     

Influence of velocity profile on calibration function of Lorentz force flowmeter

A Lorentz force flowmeter is a noncontact electromagnetic flow-measuring device based on exposing a flowing electrically conducting liquid to a magnetic field and measuring the force acting on the magnet system. The measured Lorentz force is proportional to the flow rate via a calibration coefficient which depends on the velocity distribution and magnetic field in liquid. In this paper, the influence of different velocity profiles on the calibration coefficient is investigated by using numerical simulations. The Lorentz forces are computed for laminar flows in closed and open rectangular channels, and the results are compared with the simplified case of a solid conductor moving at a constant velocity. The numerical computations demonstrate that calibration coefficients for solid bodies are always higher than for liquid metals. Moreover, it can be found that for some parameters the solid-body calibration coefficient is almost twice as high as for a liquid metal. These differences are explained by analyzing the patterns of the induced eddy currents and the spatial distributions of the Lorentz force density. The result provides a first step for evaluating the influence of the laminar velocity profiles on the calibration function of a Lorentz force flowmeter.     

Convective heat transfer from two rotating circular cylinders in tandem arrangement by using lattice Boltzmann method

The numerical investigation of the two-dimensional laminar flow past two ro- tating circular cylinders in the tandem arrangement is conducted by the lattice Boltzmann method. The numerical strategy is used for dealing with curved and moving boundaries of the second-order accuracy for velocity and temperature fields. The effects of various rotational speed ratios and gap spacing are studied with the Reynolds number of 100 and the Prandtl number of 0.71. A varied range of rotational speed ratios are investigated for four different gap spacing, i.e., 3.0, 1.5, 0.7, and 0.2. The results show that, for the first cylinder, the lift and drag coefficients for large gap spacing are similar to those for a single cylinder; for the second cylinder, the lift coefficient descends with the increase in the angular velocity for all gap spacing, while the drag coefficient ascends except for the gap spacing of 3.0. The results of the averaged periodic Nusselt number on the surface of the cylinders show that, for small distances between the cylinders and low angular velocities, conduction is a dominant mechanism of heat transfer, but for large distances and high angular velocities, convection is the main mechanism of heat transfer.     

Measurement of the acoustic velocity field of nonlinear standing waves using the synchronized PIV technique

The motion of gas within an air-filled rigid-walled square channel subjected to acoustic standing waves is experimentally investigated. The synchronized particle image velocimetry (PIV) technique has been used to measure the acoustic velocity fields at different phases over the excitation signal period. The acoustic velocity measurements have been conducted for two different acoustic intensities in the quasi-nonlinear range (in which the nonlinear effects can be neglected in comparison with the dissipation effects), and one acoustic intensity in the finite-amplitude nonlinear range (in which both the nonlinear term and the dissipative term play a role in the wave equation). The experimental velocity fields for the quasi-nonlinear cases are compared with the analytical results obtained from the time-harmonic solution of the wave equation. Good agreement between the experimental and analytical velocity fields proves the ability of the synchronized PIV technique to accurately measure both temporal and spatial variations of the acoustic velocity fields. The verified technique is then used to measure the acoustic velocity fields of the finite-amplitude nonlinear case at different phases.     

Simultaneous quantitative flow measurement using PIV on both sides of the air–water interface for breaking waves

An experimental method for simultaneously measuring the velocity fields on the air and water side of unsteady breaking waves is presented. The method includes a novel technique for seeding the air flow such that the air velocity can be resolved in the absence of wind. Low density particles that have large Stokes drag and ability to respond to high-frequency flow fluctuations are used to seed the air flow. Multi-camera, multi-laser particle image velocimetry setups are applied to small-scale unsteady breaking waves, yielding fully time-resolved velocity fields. The surface tension of the fluid is altered and controlled to form spilling breaking waves. Results for the velocity and vorticity fields of representative spilling breakers, which show shedding of an air-side vortex and well-documented generation of water-side vorticity, are presented and discussed.     

Generation of turbulent inflow and initial conditions based on multi‐correlated random fields

Direct or large eddy simulation of a turbulent flow field is strongly influenced by its initial or inflow boundary condition. This paper presents a new stochastic approach to generate an artificial turbulent velocity field for initial or inflow boundary condition based on digital filtering. Each velocity component of the artificial turbulent velocity field is generated by linear combination of individual uncorrelated random fields. These uncorrelated random fields are obtained by filtering random white‐noise fields. Using common elements in these linear combinations results in multi‐correlation among different velocity components. The generated velocity field reproduces locally desired Reynolds stress components and integral length scales including cross‐integral length scales. The method appears to be simple, flexible and more accurate in comparison with previously developed methods. The accuracy and performance of the method are demonstrated by numerical simulation of a homogeneous turbulent shear flow with high and low shear rates. To assess the accuracy and performance of the method, simulation results are compared with a reference simulation. Copyright © 2007 John Wiley & Sons, Ltd.     

具有强SORET效应的充分发展的混合流体行进波对流

混合流体Rayleigh-Benard对流是研究对流稳定性,时空结构和非线性特性的典型模型之一。本文利用流体力学扰动方程组的数值模拟,讨论了偏离传导状态具有强SORET效应的混合流体行进波对流的温度场和浓度场的成长过程,分析了充分发展对流情况下的对流振幅,Nusselt数及混合参数与相对瑞利数的关系。并给出了行进波相速度对相对瑞利数的依赖关系。结果说明混合参数的曲线与行进波相速度的分布曲线是类似的。文末,给出了垂直速度,温度和浓度场的分布并讨论了相对瑞利数对场的分布及不同场之间的相位差的影响。     

Surface characters of internal waves generated by Rankine ovoid

A linear theory on the internal waves generated in the stratified fluid with a pycnocline is presented in this paper. The internal wave fields such as the velocity fields in the stratified fluid and velocity gradient fields at the free surface are also investigated by means of the theoretical and numerical method. From the numerical results, it is shown that the internal wave generated by horizontally moving Rankine ovoid is a sort of trapped wave which propagates in a wave guide, and its waveform is a kind of Mach front-type internal wave in the pycnocline. Influence of the internal wave on the flow fields at the free surface is represented by the velocity gradient fields resulted from the internal waves generated by motion of the Rankine ovoid. At the same time, it is also shown that under the hypothesis of inviscid fluid, the synchronism between the surface velocity gradient fields at the free surface and the internal wave fields in the fluid is retained. This theory opens a possibility to study further the modulated spectrum of the Bragg waves at the free surface.The project supported by the National Natural Science Foundation of China (40576010). The English text was polished by Keren Wang.     

A THEORETICAL ANALYSIS OF THE FLOW DISTURBANCE INDUCED BY A SPHERE OSCILLATING IN INCOMPRESSIBLE FLUID

为了改进基于不可压缩流场的声类比法的气动声数值预测方法,首先要明确扰动在可压缩和不可压缩流体媒介中的传播特性. 推导了震荡小球在不可压缩流体中产生的小扰动的理论解,分析其速度场与压力场的特点,并与可压缩情况的解进行比较. 结果显示,速度场中包含传播速度为无穷大和有限值的分量;而压力场只有传播速度为无穷大的分量. 当流体黏性趋于零或小球震荡频率趋于无穷大时,其流场与经典声学中震荡小球声辐射问题的近场声一致,这表明震荡小球产生的近场扰动为不可压缩流场,即伪声.     

On the Flame-generated Vorticity Dynamics of Bluff-body-stabilized Premixed Flames

This investigation considers the dynamics of flame-generated vorticity for a premixed, submerged bluff-body stabilized flame. Experimentation characterizes the far-field region in particular with a level of detail not previously afforded to this type of flow. Simultaneous particle imaging velocimetry (PIV), Mie scattering and CH ^? chemiluminescence are used to obtain velocity fields and flame location. Mean static pressure measurements at the combustion chamber wall capture the pressure field. Analysis of the flame fronts in relation to the mean velocity and vorticity fields provides useful insight into the interaction of the flame and the flow. The unique nature of the velocity and vorticity fields and their effect on downstream flame structures are explained by the baroclinic torque generation of vorticity. The coupling that exists among pressure, heat release, and baroclinic generation is acknowledged and will influence strategies for control of the baroclinic mechanism.     

Conditional averaging of PIV plane wake data using a cross-correlation approach

A new approach is investigated for conditional averaging of a series of random snapshots of periodic velocity fields obtained from PIV measurements. This approach departs from conventional conditional averaging approaches that require a reference signal for extracting phase information and uses the cross-correlation between the velocity fields as a phase identifier. The methodology is applied on the natural and forced turbulent wake of a circular cylinder, the latter serving also as a validation/verification case. The results show that the vortex formation and shedding processes in the wake are drastically affected by inflow oscillations and reveal the underlying vortex dynamics. Additionally, detailed velocity measurements are reported for the two cases investigated.     

Statistical characteristics of the diffusion of a chemically active additive in a turbulent mixing zone

In the article a numerical solution of the connected system of the equations of turbulent transfer for the fields of the velocity and concentration of a chemically active additive is used to calculate a number of the second moments of the concentration field in a flat mixing zone. The system of transfer equations is derived from the equations for a common function of the distribution of the fields of the pulsations of the velocity and the concentration [1] and is simplified in the approximation of the boundary layer. A closed form of the transfer equations is obtained on the level of three moments, using the hypothesis of four moments [2] and its generalized form for mixed moments of the field of the velocity and the field of a passive scalar. The differential operator of the closed system of the equations of turbulent transfer for the fields of the velocity and the concentration is found by a method of closure not of the parabolic type but of a weakly hyperbolic type [3]. An implicit difference scheme proposed in [4] is used for the numerical solution. The results of the numerical solution are compared with the experimental data of [5].     

An approximately divergence-free 9-node velocity element (with variations) for incompressible flows

Explicit basis functions are constructed for 9-node biquadratic velocity fields which guarantee that a weak form of the continuity equation is satisfied. The corresponding pressure approximations are either piecewise constant, piecewise linear or piecewise bilinear. These results are extended to give bases for bilinear velocity/piecewise constant pressure elements and also to some three-dimensional brick elements.