首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到19条相似文献,搜索用时 93 毫秒
1.
顾易 《固体力学学报》2007,28(2):183-188
考虑固体膜/粘滞层/基底结构中粘滞层/基底界面不平整对结构的稳定性,特别是固体薄膜稳定时的褶皱变形产生的影响.考虑自仿射和峰状的粗糙界面.自仿射的粗糙界面由振幅和分形维表征,振幅和分形维越大对结构平衡的影响越大;峰状界面由振幅和平均峰间距表征,振幅越大对结构平衡影响越大,平均峰间距越小对结构平衡影响越大.进而,用有限元方法模拟分析该结构,得到界面平整和不平整两种情况下固体膜面内失稳力.结果表明,粘滞层/基底不平整情况下结构的平衡状态与假设该界面为理想平整面所得的结果有很大不同,在结构尺寸较小的情况下不可假设该界面为理想平整来考察该结构的稳定性.  相似文献   

2.
基底弹性对蒸发超薄液膜去润湿过程的影响   总被引:1,自引:0,他引:1  
研究了基底的弹性变形对蒸发超薄膜的稳定性和去润湿动力学过程的影响. 基于长波近 似, 得到了关于液体薄膜厚度的演化方程. 运用线性稳定性理论和数值模拟两种方法, 研究 了基底弹性、范德华力以及液体蒸发等因素对液体薄膜的稳定性和去润湿过程的影响. 研究结果表明增大 基底的弹性系数或者减小液体的表面张力, 都能加速液膜的破碎, 并且能够影响气液界面波 的波长; 液体蒸发能促进气液界面扰动的增长, 有助于液膜的破裂.  相似文献   

3.
为了研究铜膜/有机玻璃结构的界面性能,首先对沉积在有机玻璃基底上300nm厚的铜膜进行了单轴压缩实验,部分区域的薄膜因屈曲而脱离基底。选择在膜/基粘接良好区域、膜/基脱粘区域分别进行等位移纳米压痕实验。利用膜/基粘接良好区域处硬度/弹性模量与压痕位移的关系来确定膜/基结构的临界脱粘位移。基于宏观力学中表征界面性能的能量法,利用两个区域等位移的塑性功差值来确定界面能量释放率。研究结果表明:当压痕位移约450nm时,膜/基结构开始出现界面脱粘,实验测得铜膜/有机玻璃结构的界面能量释放率值在6.81~10.32J/m2之间。  相似文献   

4.
阎凯  宁智  吕明 《计算力学学报》2012,29(6):893-900
利用线性稳定性理论进行了射流液体粘性对圆环旋转液膜射流稳定性影响的研究,推导出了三维扰动下具有固体旋涡型速度分布的圆环旋转粘性液膜射流的色散方程;在此基础上进行了类反对称模式与类对称模式下的圆环旋转粘性液膜射流的三维不稳定性分析。研究结果表明,在类反对称模式下,液体粘性超过一定值后,射流最大扰动增长率随液体粘性的增加而迅速减小;轴对称模态的射流特征频率产生一个突降变化;随液体粘性增加,轴对称模态不稳定波数范围减小,非轴对称模态不稳定波数范围呈现出先减小后增大趋势。在类对称模式下,液体粘性对射流最大扰动增长率的影响主要体现在对非轴对称模态的影响上;液体粘性只在粘性较大时才会对非轴对称模态射流特征频率产生一定影响;液体粘性超过一定值后,轴对称模态与非轴对称模态的不稳定波数范围都会快速下降。  相似文献   

5.
针对非接触式液体螺旋槽机械密封,分析了周期性轴向微扰动和角微扰动对密封环端面间液膜厚度的影响规律,建立了单周期螺旋槽液膜模型,采用数值法求解时变雷诺方程,研究了微扰动对液膜承载力和泄漏率等密封特性参数的影响.结果表明,膜厚对液膜承载力和泄漏率的影响显著,膜厚增加,液膜承载力减小,泄漏率增大.液膜承载力、泄漏率的变化幅度和频率主要受到轴向扰动的影响.角扰动造成沿圆周方向分布的液膜承载力不均匀而使液膜稳定性变差.  相似文献   

6.
硬薄膜/软基底结构的表面失稳问题一直是柔性电子器件的难题,基于此,本文考虑了双层结构与弹性梯度基底间的界面剪切力,建立了双层薄膜/弹性梯度基底模型;利用位移协调条件,理论推导得到了双层薄膜/弹性梯度基底结构的临界应变和失稳波长的表达式并通过有限元仿真,验证了本研究解析解的有效性。在此基础上,应用此解析解进一步研究了弹性梯度基底的材料、双层薄膜结构厚度比等参数对临界应变和波长的影响。结果表明:减小器件层的厚度或者增加封装层的厚度,可以提高双层膜/弹性梯度基底结构的稳定性;当弹性梯度材料基底表面“较软”或器件层“较硬”时,器件层与基底界面的剪切力的影响较大,可以提升三层膜/基结构抵抗界面破坏的能力。本研究成果将为硬薄膜/弹性梯度基底结构的柔性电子器件的制备提供理论支撑。  相似文献   

7.
基于线性稳定性理论,建立了描述超空化条件下液体射流热稳定性的数学模型,并对数学模型及其求解方法进行了验证;在此基础上,对超空化条件下液体射流与周围气体间的温差对射流稳定性的影响进行了研究。研究结果表明,液体射流与周围气体间存在温差时,射流稳定性变差,扰动波波数范围拓宽,且拓宽的程度随温差的增加有明显加大的趋势;温度扰动对射流稳定性的影响与扰动模式关系不大;温度扰动会在一定程度上削弱超空化对射流稳定性的作用,并有可能完全抑制超空化对扰动波最大波数的作用,只有当超空化达到一定程度后,才能克服温度扰动的抑制作用,使扰动波最大波数变大。  相似文献   

8.
TiN/TaN多层膜的结构和摩擦学性能   总被引:7,自引:1,他引:6  
利用磁控溅射法在单晶硅基底上制备了一系列TiN/TaN多层膜; 采用X射线衍射仪、显微硬度计、球-盘摩擦磨损试验机和三维表面形貌仪等分析了多层膜的结构、硬度、摩擦学性能和磨损机制.结果表明:所制备的多层膜具有良好的周期性和清晰的界面结构,其中TiN层具有面心立方结构,当TaN层在调制周期Λ值小于8.5 nm时具有面心立方结构,在调制周期Λ值大于8.5 nm时具有部分六方结构;多层膜的硬度受调制周期影响,当调制周期Λ值为8.5 nm时,显微硬度达到最大值31.5 GPa.相对于TiN薄膜而言,TiN/TaN多层膜的摩擦系数较高、耐磨性能更好;多层膜的磨损机制主要为犁削、粘着和局部剥落.  相似文献   

9.
本文联立求解可压缩平面液体撞击弹性固体表面时液体激波面及液固相界面上的物理过程控制方程组,导出了激波速度、撞击压力和固体表面变形速度的计算公式.导出的公式中包括了表征液体可压缩性的撞击马赫数M_0和表征固体弹性的液固声阻抗比Γ.通过计算液体撞击PMMA,钙钠玻璃、ZnSe和1Cr13时的撞击压力,本文具体分析了M_0和Γ对撞击压力产生的综合影响。  相似文献   

10.
基于线性稳定性理论,建立了描述同轴旋转可压缩流动中超空化条件下液体射流稳定性的数学模型,并对数学模型及其求解方法进行了验证;在此基础上,对模型中考虑的射流及气体可压缩性、气体同轴旋转以及超空化等因素对射流稳定性的影响进行了分析. 分析结果表明,模型中考虑射流及气体的可压缩性后,与不考虑可压缩性相比,计算得到的射流稳定性明显变差,最小液滴直径减小,分裂液滴直径变化范围变宽,且小液滴数量增多. 气体的同轴旋转在轴对称与非轴对称扰动下对射流稳定性的影响完全相反;轴对称扰动时,气体旋转使射流稳定性增强,而非轴对称扰动时则正好相反;气体旋转有可能导致影响射流稳定性的扰动模式发生根本性变化. 超空化使射流稳定性变差;超空化程度较弱时,超空化使分裂液滴最小直径减小,分裂液滴直径变化范围增大;而超空化达到一定程度后,进一步提高超空化程度,分裂液滴最小直径几乎保持不变.  相似文献   

11.
The problem of the wave motion of a liquid layer was first investigated by Kapitsa [1, 2], who gave an approximate analysis of the free flow and flow in contact with gas stream, and evaluated the influence of the heat transfer processes on the flow. The problem of the stability of such a flow was studied in detail by Benjamin [3] and Yih [4, 5], These authors proposed seeking the solution of the resulting Orr-Sommerfeld equation in the form of a series in a small parameter and developed a corresponding method of successive approximations. As the small parameter [3–5], they made use of the product of the disturbance wave number and the Reynolds number. In these studies, the tangential stress on the free surface was taken equal to zero, and the fluid film was always considered essentially plane. At the same time, there are certain types of problems of considerable interest in which neither of these assumptions is satisfied. A good example might be the problem on the stability of the annular regime of two-phase flow in pipes and capillaries, when the basic stream of one fluid is separated from the pipe walls by an annular layer of another fluid. In this case, the interface has a finite radius of curvature and the tangential stress on the interface may be significantly different from zero.In the present paper, the problem of the flow stability of a fluid layer with respect to small disturbances of the boundary surface is considered with account for both the finite radius of curvature of the boundary surface and the nonzero hydrodynamic friction at the boundary. The film is assumed to be quite thin. This enables us, firstly, to consider the Reynolds number small, to use the general method of [5], and, second ly, to consider the film thickness sufficiently small in comparison with the radius of curvature of the substrate on which the film lies. Furthermore, for evaluating the stability of the laminar flow of the curved film we can use the results obtained for a plane film with account for the terms which depend on the curvature of the substrate.As a rule, previous studies have considered only one-dimensional disturbances of the boundary surface. In the present paper, in the first approximation, the stability is examined in relation to two-dimensional disturbances of this surface, corresponding to three-dimensional flow disturbances.As an example, the results obtained are applied to the investigation of the stability of the free flow of a layer of fluid over an inclined plane under the sole influence of gravity.  相似文献   

12.
The stability of a free vertical liquid film under the combined action of gravity and thermocapillary forces has been studied. An exact solution of the Navier-Stokes and thermal conductivity equations is obtained for the case of plane steady flow with constant film thickness. It is shown that if the free surfaces of the film are perfectly heat insulated, the liquid flow rate through the cross section of the layer is zero. It is found that to close the model with consideration of the heat exchange with the environment, it is necessary to specify the liquid flow rate and the derivative of the temperature with respect to the longitudinal coordinate or the flow rate and the film thickness. The stability of the solution with constant film thickness at small wave numbers is studied. A solution of the spectral problem for perturbations in the form of damped oscillations is obtained.  相似文献   

13.
The laminar flow of a thin layer of heavy viscous magnetic liquid down an inclined wall is examined. The stability and control of the flow of an ordinary liquid are affected only by alteration of the angle of inclination of the solid wall and the velocity of the adjacent gas flow. When magnetic liquids are used [1, 2], an effective method of flow control may be control of the magnetic field. By using magnetic fields of various configurations it is possible to control the flow of a thin film of viscous liquid, modify the stability of laminar film flow, and change the shape of the free surface of the laminarly flowing thin film, a factor which plays a role in mass transfer, whose rate depends on the phase contact surface area. The magnetic field significantly affects the shape of the free surface of a magnetic liquid [3, 4]. In this paper the velocity profile of a layer of viscous magnetic liquid adjoining a gas flow and flowing down an inclined solid wall in a uniform magnetic field is found. It is shown that the flow can be controlled by the magnetic field. The problem of stability of the flow is solved in a linear formulation in which perturbations of the magnetic field are taken into account. The stability condition is found. The flow stability is affected by the nonuniform nature of the field and also by its direction.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 5, pp. 59–65, September–October, 1977.  相似文献   

14.
By the method of tracer particles the velocity field of thermocapillary convection in a thin layer of silicone oil, excited by a quasi-point heat source in the rigid substrate, is investigated as a function of the layer thickness, the temperature of the heater, and the liquid viscosity. The vertical velocity distributions are plotted in several cross-sections at different distances from the vortex axis. A novel method of measuring the profile of the thermocapillary depression, based on mirror reflection from the free liquid surface of radiation scattered by a tracer particle, is proposed. The central segment of the profile of the thermocapillary depression is obtained for different values of the layer thickness, the liquid viscosity and the heater temperature.  相似文献   

15.
The effect of an externally applied electric field on the stability of a thin fluid film over an inclined porous plane is analyzed using linear and non-linear stability analysis in the long wave limit. The principle aim of this study is to illustrate the influence of electric field on the non-linear stability of a thin liquid layer flow down incline substrate when the plane is porous. The driving force for the instability under an electric field is an electrostatic force exerted on the free charges accumulated at the dividing interface. The coupled non-linear evolution equations for the local film thickness and the interfacial charge for two-dimensional disturbances are derived to analyze the effect of long-wave instabilities. The method of multiple scales is applied to obtain approximate solutions and analyze the stability criteria. Numerical simulations of this system of non-linear evolution equations are performed. It is found that the permeability parameter as well as the inclination of the plane plays a destabilizing role in the stability criteria, while the damping influence is observed for increasing of the electrical conductivity in both linear and non-linear behavior.  相似文献   

16.
This paper presents a linear stability analysis for the onset of natural convection in a horizontal nanofluid layer. The employed model incorporates the effects of Brownian motion and thermophoresis. Both monotonic and oscillatory convection for free–free, rigid–rigid, and rigid–free boundaries are investigated. The oscillatory instability is possible when nanoparticles concentrate near the bottom of the layer, so that the density gradient caused by such a bottom-heavy nanoparticle distribution competes with the density variation caused by heating from the bottom. It is established that the instability is almost purely a phenomenon due to buoyancy coupled with the conservation of nanoparticles. It is independent of the contributions of Brownian motion and thermophoresis to the thermal energy equation. Rather, the Brownian motion and thermophoresis enter to produce their effects directly into the equation expressing the conservation of nanoparticles so that the temperature and the particle density are coupled in a particular way, and that results in the thermal and concentration buoyancy effects being coupled in the same way.  相似文献   

17.
The authors develop a numerical procedure to analyze the adhesive contact between a soft elastic layer and a rough rigid substrate. The solution of the problem, which belongs to the class of the free boundary problems, is obtained by calculating the Green's function which links the pressure distribution to the normal displacements at the interface. The problem is then formulated in the form of a Fredholm integral equation of the first kind with a logarithmic kernel, and the boundaries of the contact area are calculated by requiring that the energy of the system is stationary. The methodology is relatively simple and easy to implement in a numerical code. It has been utilized to analyze the adhesive properties of a confined layer in contact with a wavy rigid substrate as a function of thickness, applied stress or penetration. It is shown that reducing the thickness of the slab reduces the effective energy of adhesion, i.e. the work needed to separate the bodies, but nevertheless increases the adherence force between the slab and the substrate. However, thinning the slab also increases the confinement of the system and therefore increases the negative hydrostatic pressure in the layer. This, in turn, may produce cavitation. When this happens the rupture of the adhesive bond does not occur through interfacial crack propagation but, by the growth of new interfacial voids or cavities.  相似文献   

18.
Upon swelling in a solvent, a thin hydrogel layer on a rigid substrate may become unstable, developing various surface patterns. Recent experimental studies have explored the possibilities to generate controllable surface patterns by chemically modifying the molecular structures of the hydrogel near the surface. In this paper, we present a theoretical stability analysis for swelling of hydrogel layers with material properties varying in the thickness direction. As a specialization of the general procedure, hydrogel bilayers with different combinations of the material properties are examined in details. For a soft-on-hard bilayer, the onset of surface instability is determined by the short-wave limit, similar to a homogeneous layer. In contrast, for a hard-on-soft bilayer, a long-wave mode with a finite wavelength emerges as the critical mode at the onset of surface instability, similar to wrinkling of an elastic thin film on a compliant substrate, and the critical swelling ratio is much lower than that for a homogeneous hydrogel layer. A smooth transition of the critical mode is predicted as the volume fraction of the top layer changes, linking surface instability of a homogeneous layer to thin film wrinkling as two limiting cases. The results from the present study suggest that both the critical condition and the instability mode depend sensitively on the variation of the material properties in the thickness direction of the hydrogel layer.  相似文献   

19.
We study strain relief by surface roughness and composition variation in a stressed alloy film. Instead of using common perturbation techniques, we derive a rigorous relaxation formula based on the energy approach in the case of slightly undulating surface and fluctuating composition. We do not require any a priori assumption of elastic isotropy or identical material properties between film and substrate in deriving our result. We show that the change of elastic energy is negative, giving rise to energy relief due to the presence of free surface. We apply our result to the study of compositional and morphological instabilities of a stressed thin layer with a free surface. The critical wave number of instability is determined by the competition between the destabilizing influence of elastic strain energy and the stabilizing influence of chemical and surface energies.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号