Motion of a solidcontaininga spherical damper

For the purpose of modeling the motion of a solid with a cavity filled with a viscous fluid, M. A. Lavrent'ev [1] has proposed a model in the form of a solid with a spherical cavity in which another solid, spherical in shape, is enclosed. The sphere is separated from the cavity walls by a small, clearance in which viscous forces act (a lubricating film). This simple model with a finite number of degrees of freedom possesses certain mechanical properties of a solid with a cavity containing a viscous fluid. Study of this model is therefore of interest.The present paper examines certain properties of the model, which will be termed a solid with a damper. It is shown that for a highviscosity lubricant the motion of a solid with a damper can be described by the same equations which pertain to the motion of a solid with a spherical cavity filled with a high-viscosity fluid. Expressions relating the parameters of the systems are obtained. If these relations are fulfilled, the systems become mechanically equivalent.The steady motions of a free solid with a damper and their stability conditions are determined.These motions and stability conditions hold for a body with a cavity filled with a viscous fluid [2].     

Pressure waves in a tube filled with a bubbly mixture with a nonuniform cross-sectional bubble distribution

The evolution of pressure waves in a tube filled with a gas-liquid medium with a stepped cross-sectional bubble distribution is investigated. The calculations are compared with experimental data. It is shown that in the case of a nonuniform bubble distribution, due to the appearance of transverse flows, the pressure pulse is damped faster than for a uniform distribution. The interaction of pressure waves with a bubble cluster in a tube filled with liquid is also analyzed.     

Nonlinear oscillatory processes in wheeled vehicles

The free damped vibrations of a wheeled vehicle with independent suspension are analyzed with allowance for the nonlinear characteristics of the suspension springs and shock absorbers. The vibrations of a wheeled vehicle with a suspension with smooth nonlinear characteristics are studied for a model with seven degrees of freedoms. The skeleton curves and nonlinear normal modes are obtained. For a model with two degrees of freedoms (quarter-car) that corresponds to axisymmetric vibrations, the nonlinear normal modes are found in the case of a shock absorber with nonsmooth nonlinear characteristic     

SPH for 3D floating bodies using variable mass particle distribution

A floating body with substantial heave motion is a challenging fluid–structure interaction problem for numerical simulation. In this paper we develop SPH in three dimensions to include variable particle mass distribution using an arbitrary Lagrange–Eulerian formulation with an embedded Riemann solver. A wedge or cone in initially still water is forced to move with a displacement equal to the surface elevation of a focused wave group. A two‐dimensional wedge case is used to evaluate two forms of repulsive‐force boundary condition on the body; the force depending on the normal distance from the object surface produced closer agreement with the experiment. For a three‐dimensional heaving cone the comparison between SPH and experiment shows excellent agreement for the force and free surface for motion with low peak spectral frequencies while for a higher peak frequency the agreement is reasonable in terms of phase and magnitude, but a small discrepancy appears at the troughs in the motion. Capturing the entire three‐dimensional flow field using an initially uniform particle distribution with sufficiently fine resolution requires an extremely large number of particles and consequently large computing resource. To mitigate this issue, we employ a variable mass distribution with fine resolution around the body. Using a refined mass distribution in a preselected area avoids the need for a dynamic particle refinement scheme and leads to a computational speedup of more than 600% or much improved results for a given number of particles. SPH with variable mass distribution is then applied to a single heaving‐float wave energy converter, the ‘Manchester Bobber’, in extreme waves and compared with experiments in a wave tank. The SPH simulations are presented for two cases: a single degree‐of‐freedom system with motion restricted to the vertical direction and with general motion allowing six degrees‐of‐freedom. The motion predicted for the float with general motion is in much closer agreement with experimental data than the vertically constrained system. Using variable particle mass distribution is shown to produce close agreement with a computation time 20% of that required with a uniformly fine resolution. Copyright © 2012 John Wiley & Sons, Ltd.     

Forced Vibration of Continuous System with Unsymmetrical Collision Characteristics

This paper deals with steady-state response of a continuous system with nonlinear boundary conditions which are motion-limiting constraint. An analytical method of approximate solution for the continuous system with unsymmetrical collision characteristics in which the beam end collides with a stop once in one period of its vibration is presented. Some numerical results of the approximate solution are shown. Contrary to the case of continuous system with symmetrical collision characteristics, the resonance curves of nonlinear response of approximate solution are shown as discontinuous line. Some numerical results of a continuous system with no hysteresis damping are compared with those of a continuous system with hysteresis damping and a single-degree-of-freedom system.     

Interaction of cracks with bonds between their faces in an isotropic medium reinforced by a regular system of stringers

A problem of an elastic isotropic medium with a system of foreign (transverse with respect to crack alignment) rectilinear inclusions is considered. The medium is assumed to be attenuated by a periodic system of rectilinear cracks with zones where the crack faces interact with each other. These zones are assumed to be adjacent to the crack tips, and their sizes can be commensurable with the crack size. Interaction between the crack faces in the tip zone is modeled by introducing bonds (adhesion forces) between the cracks with a specified strain diagram. The boundary-value problem of the equilibrium of a periodic system of cracks with bonds between their faces under the action of external tensile loads and forces in the bonds is reduced to a nonlinear singular integrodifferential equation with a kernel of the Cauchy kernel type. The condition of critical equilibrium of the cracks with the tip zones is formulated with allowance for the criterion of critical tension of the bonds. A case of a stress state of the medium containing zones where the crack faces interact with each other is considered.     

Role of the confinement of a root canal on jet impingement during endodontic irrigation

During a root canal treatment the root canal is irrigated with an antimicrobial fluid, commonly performed with a needle and a syringe. Irrigation of a root canal with two different types of needles can be modeled as an impinging axisymmetric or non-axisymmetric jet. These jets are investigated experimentally with high-speed Particle Imaging Velocimetry, inside and outside the confinement (concave surface) of a root canal, and compared to theoretical predictions for these jets. The efficacy of irrigation fluid refreshment with respect to the typical reaction time of the antimicrobial fluid with a biofilm is characterized with a non-dimensional Damk?hler number. The pressure that these jets induce on a wall or at the apex of the root canal is also measured. The axisymmetric jet is found to be stable and its velocity agrees with the theoretical prediction for this type of jet, however, a confinement causes instabilities to the jet. The confinement of the root canal has a pronounced influence on the flow, for both the axisymmetric and non-axisymmetric jet, by reducing the velocities by one order of magnitude and increasing the pressure at the apex. The non-axisymmetric jet inside the confinement shows a cascade of eddies with decreasing velocities, which at the apex does not provide adequate irrigation fluid refreshment.     

General Anisotropic Effective Medium Theory for the Effective Permeability of Heterogeneous Reservoirs

One of the techniques to calculate the effective property of a heterogeneous medium is the effective medium theory. The present paper presents a general mathematical formulation for the effective medium approximation using a self-consistent choice of the effective permeability, to apply it to the case of a general anisotropic 2D medium and to the case of a 3D isotropic medium with randomly oriented ellipsoidal inclusions. The 2D results are compared with analytical results and with a homogenization technique with good result. The 3D correlations are used to derive percolation thresholds in two-phase systems with a large permeability contrast, which are compared to numerical results from the literature, also with good results.     

A Self-Similar Solution to the Problem of Lava Dome Growth on an Arbitrary Conical Surface

Within the framework of the asymptotic thin-film equations for a highly viscous heavy Newtonian fluid, a hydrodynamic model of non-axisymmetric lava dome growth on a conical surface is constructed. A new class of self-similar solutions describing the flow on a conical surface with finite inclination to the horizontal and a point mass supply at the apex is found analytically for power-law or exponential growth of the liquid volume with time. For a conical surface with a small inclination to the horizontal, the free-surface shape is found numerically. The asymptotics of this solution are compared with the solutions describing the flow on a horizontal plane and a conical surface with finite inclination to the horizontal.     

Some Results in the Dynamical Theory of Porous Elastic Bodies

This paper is concerned with the linear dynamic theory of elastic materials with voids. First, a spatial decay estimate of an energetic measure associated with a dynamical process is established. Then, a domain of dependence inequality associated with a boundary-initial-value problem is derived and a domain of influence theorem is established. It is shown that, for a finite time, a solution corresponding to data of bounded support vanishes outside a bounded domain.     

Analysis of nonlinear oscillators under stochastic excitation by the Fokker-Planck-Kolmogorov equation

The paper deals with the analysis of stochastic mechanical systems with one degree of freedom and proposes a simple procedure to obtain a representation of the dynamical response. In particular, approximate solution of the FPK equation is obtained for a system subjected to a stochastic force term. The resolving procedure is implemented with reference to a polynomial expansion of the restoring force function. Numerical tests are performed with reference to Duffing and van der Pol oscillators, showing good agreement with simulated response.     

Asymptotic solutions by the successive disordering method

We develop the periodic componentmethod [1] and represent the solution of a stochastic boundary value elasticity problem for a random quasiperiodic structure with a given disordering degree of inclusions in the matrix via the deviations from the corresponding solution for a random structure with a smaller disordering degree. An example in which the tensor of elastic properties of a composite is calculated is used to illustrate the asymptotic and differential approaches of the successive disordering method. The asymptotic approach permits representing the quasiperiodic structure with a given chaos coefficient and the desired tensor of effective elastic properties as a result of small successive disordering of an originally ideally periodic structure of a composite with known tensor of elastic properties. In the differential approach, a differential equation is obtained for the tensor of effective elastic properties as a function of the chaos coefficient. Its solution coincides with the solution provided by the asymptotic approach. The solution is generalized to the case of piezoactive composites, and a numerical analysis of the effective properties is performed for a PVF (polyvinylidene fluoride) piezoelectric with various quasiperiodic structures on the basis of the cubic structure with spherical inclusions of a high-module elastic material.     

Coupled RANS–LPT modelling of dilute,particle-laden flow in a duct with a 90° bend

A dilute, particle-laden flow in a square duct with a 90° bend is modelled using a RANS approach, coupled to a second-moment turbulence closure, together with a Lagrangian particle tracking technique, with particle dispersion modelled using a stochastic approach that ensures turbulence anisotropy. Detailed predictions of mean and fluctuating fluid and particle velocities are validated through comparisons of predictions with experimental measurements made for gas–solid flows in a vertical-to-horizontal flow configuration. Reasonable agreement between predicted first and second moments and data is found for both phases, with the consistent application of anisotropic and three-dimensional modelling approaches resulting in predictions that compare favourably with those of other authors, and which provide fluctuating particle velocities in acceptable agreement with data.     

Collision of a Solid with an Incompressible Fluid

We give a predictive theory of the collisions of a viscous incompressible fluid with solids. The theory is based on interior percussions which account for the very large stresses and contact forces resulting from the kinematic incompatibilities responsible for the collision. New equation of motion and constitutive laws result from the theory. Examples dealing with a fluid colliding with its container and with a diver impacting the water of a swimming pool are studied.     

Surface instability of an elastic half space with material properties varying with depth

If a body with a stiffer surface layer is loaded in compression, a surface wrinkling instability may be developed. A bifurcation analysis is presented for determining the critical load for the onset of wrinkling and the associated wavelength for materials in which the elastic modulus is an arbitrary function of depth. The analysis leads to an eigenvalue problem involving a pair of linear ordinary differential equations with variable coefficients which are discretized and solved using the finite element method.The method is validated by comparison with classical results for a uniform layer on a dissimilar substrate. Results are then given for materials with exponential and error-function gradation of elastic modulus and for a homogeneous body with thermoelastically induced compressive stresses.     

Dynamics of thin periodic plates resting on a periodically inhomogeneous Winkler foundation

Summary The aim of the paper is to investigate the dynamic response of thin elastic plates having periodic substructure in planes parallel to the plates midplane and interacting with a Winkler foundation. The main goal of the analysis is to describe the effect of substructure size on the plates dynamics. For this purpose, the method proposed in [4, 5] is used. Two special cases are analysed: a plate band with a constant thickness interacting with a periodically inhomogeneous Winkler foundation, and a plate band with a periodically variable thickness interacting with a homogeneous Winkler foundation. The physical correctness conditions of the model are also discussed. Received 14 July 1998; accepted for publication 7 January 1999     

Periodic heat conduction with relaxation time in cylindrical geometry

Steady-periodic heat conduction with relaxation time in an infinitely long hollow cylinder is considered. Four boundary value problems, with boundary conditions of the first and of the second kind, are solved analytically. The solution for a solid cylinder with a sinusoidally varying surface temperature is obtained as a special case of a solution found for the hollow cylinder. The effects of the relaxation time on the steady-periodic temperature field are analysed, in details, for a solid cylinder with a sinusoidally varying surface temperature and for a hollow cylinder with a sinusoidally varying heat flux at the inner surface and with a constant temperature at the outer surface. The results show that thermal resonances may occur and suggest that accurate measurements of the relaxation time could be obtained by means of experiments on steady-periodic heat conduction in cylindrical geometry. Received on 15 April 1997     

Analysis of double-Mach-reflection wave configurations with convexly curved Mach stems

The wave configuration of a double Mach reflection (DMR) with a convexly curved Mach stem and the resulted flow fields are analyzed. An analytical model describing the formation of a with a curved Mach stem and predicting its wave configuration is proposed. The transition criterion from a with a straight Mach stem to a with a curved Mach stem is also suggested. Predictions based on the analytical model are compared to experimental results. The agreement is found to be good to excellent. Received 5 July 1996 / Accepted 18 March 1998     

Free vibration of a sagged cable with attached discrete elements

An algorithm is presented to analyze the free vibration in a system composed of a cable with discrete elements, e.g., a concentrated mass, a translational spring, and a harmonic oscillator. The vibrations in the cable are modeled and analyzed with the Lagrange multiplier formalism. Some fragments of the investigated structure are modeled with continuously distributed parameters, while the other fragments of the structure are modeled with discrete elements. In this case, the linear model of a cable with a small sag serves as a continuous model, while the elements, e.g., a translational spring, a concentrated mass, and a harmonic oscillator, serve as the discrete elements. The method is based on the analytical solutions in relation to the constituent elements, which, when once derived, can be used to formulate the equations describing various complex systems compatible with an actual structure. The numerical analysis shows that, the method proposed in this paper can be successfully used to select the optimal parameters of a system composed of a cable with discrete elements, e.g., to detune the frequency resonance of some structures.